YieldStar Production Engineer Job at ASML (Linkou)

Manufacturing – Technical Support Senior Competency Engineer (Optics) – Linkou

The Manufacturing – Technical Support Senior Competency Engineer (Optics) plays ...

Location

Taiwan , Linkou

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelor’s degree or above in Engineering, with strong relevance to: Optics / Optical Engineering
Applied Physics (optics-focused)
Photonics / Electro-Optical Engineering
Electrical Engineering with strong optics exposure
5~8+ years of experience in semiconductor, electronics, or precision equipment industries
Strong background in one or more of the following optics-related domains: Optical module integration, alignment, or calibration
Optical sensing, imaging systems, illumination paths, or interferometric principles
Troubleshooting optics-related system behavior in production or development environments
Experience acting as a technical focal point, project lead, or senior technical contributor responsible for cross-team alignment and technical decision-making
Strong system-level understanding of optical behavior and its interaction with mechanical, electrical, and control systems

Job Responsibility

Lead optics-related technical assessments during daily passdown, DRB (Disturbance Review Board), and escalation meetings
Serve as the technical decision owner for complex optics-related issues, including imaging behavior, illumination stability, sensor accuracy, and calibration performance
Consolidate technical findings, risks, and recommendations into clear conclusions to support management alignment and operational prioritization
Own high-impact, recurring, and long-duration optics-related disturbances across YieldStar manufacturing lines
Coordinate cross-functional resources including D&E (Optics, Mechatronics, Software & Control), Manufacturing Engineering, Technical Support Engineers, and Production Engineers
Identify escalation triggers, risk exposure, and containment actions to minimize machine downtime and prevent issue recurrence
Perform structural analysis to identify systemic gaps in optical design, calibration methods, diagnostics, or manufacturing execution
Drive the development, validation, and deployment of Best-Known Methods (BKM) related to optical alignment, calibration, sensing, and diagnostics across product lines
Ensure optics-related improvements are standardized and sustainably implemented
Provide technical guidance and coaching on optics-related troubleshooting methodology and system-level behavior understanding

Fulltime

Mechatronics Engineer

To contribute to the development of the YieldStar product and to contribute to t...

Location

Taiwan , Linkou

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelor/ Master Degree in Mechatronic Engineering/ Mechanical Engineering is preferred
2+ years of work experience is preferred
Familiar with YS and Stage Position Measurement is a plus
Precision mechanical motion stage design, automatic machine design, servo motion control experience, repairs/refurbishments of multi-disciplinary equipment like measurement tools, positioning tools, assemblies etc. are an advantage
Experience in Quality & Efficiency improvement projects in both the production and development environment are an advantage
Experience in Stage Position measurement troubleshooting
Candidate must be familiar with Matlab program
Candidate must be familiar with motion control design algorithm and mechatronics design principle
Candidate must have a strong technical leadership and drive the development to a quality result and work effectively in a team
Good knowledge of English

Job Responsibility

Inventing construction principles and joint building strategies for the precise positioning of complex dynamic mechanical systems
Carrying out design analyses and verification on Stage Position Measurement
Fills a general advisory position in the field of precision engineering and is therefore responsible for the correct application of precision engineering principles when developing metrology systems
Specifies, re-design and optimize all the precision mechatronic aspects of the YieldStar modules in order to meet the system performance
Designs and realizes test equipment and is responsible for ensuring that prototypes are built and tests are carried out
Is responsible for the technical product documentation in order to unambiguously explain the design to suppliers
Contribute to the YieldStar master plan by making a realistic work break down
Support YieldStar manufacturing and customer support organization with high end troubleshooting
Optimizing quality of the mechatronic aspects of the YieldStar modules.

Fulltime

System Install Engineer

This vacancy is open for talent pool collection. We will contact you if we have ...

Location

Taiwan , Linkou

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Bachelor degree/Master degree in technical domain (e.g. mechanical engineering, mechatronics, electrical engineering, physics)
Experience with mechanics and electronics
Experience with computer systems and test software
Experience or proven affinity with functional testing and troubleshoot
Capability to log the progress of the workflow and the interruptions
Ability to follow up on actions and give feedback on taken actions
Ability to work in a multi-disciplinary team within a high tech(proto) environment
Flexibility to work in shifts and weekends, work overtime when needed
Drive for continuous improvement
Drive to share knowledge and train colleagues

Job Responsibility

Calibrate, qualify and install ASML's products according to the highest quality standards and world class delivery performance
Final assembly of YieldStar systems in cleanroom environment
Perform system calibration and qualification through functional testing
Install YieldStar systems at customer locations, from unload components, build to Site Acceptance Test (SAT), including equipment with new features
Represent ASML at the customer site in a professional way
Take responsibility for system progress
Provide first line technical support on integration of systems, in order to minimize impact on production output
Point out recurring problems during assembly, calibration and qualification and contributes to their solution
Interface with internal customers on technical issues and improvement proposal
Interface with own work center, Manufacturing Engineering and Development and Engineering on complex technical reduction issues and New Product Introduction

YieldStar Assembly Engineer

Has practical knowledge of the application of standard hardware and software too...

Location

Taiwan , Linkou

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

Secondary vocational education with substantial experience or Bachelor degree with limited experience
Hands-on experience preferably with mechanical and/or electrical parts using precisions tools

Job Responsibility

Performs all relevant technical activities, based on the standard Assembly procedures, guidelines and handbook
Ensures Milestone Progress is met at the end of each shift and drives Milestone Progress across Shifts of and Cabins
Is able to lead own cabin team and is able to represent the own cabin team for technical matters throughout the shift
Is up to speed with technical matters of own and other cabins in same Milestone
Keep up with relevant developments in own field of expertise, acquire relevant (new product / process) information, define knowledge gaps in own discipline / team and ensure the development and/or exchange of knowledge among colleagues
Request, receive, check and store materials, tools / equipment and/or ASML products, prepare for distribution and ensure distribution to (internal or external) clients
May deal with customers requesting or providing information. Is mindful of checking for quality of materials throughout the build process
Contribute actively to realization of the introduction and integration of new products and/or processes in logistics / production, taking into account test protocols and applicable operations and guidelines
Coordinates and/or executes a variety of manufacturing activities, monitor and/or supervise production activities and if necessary (contribute to) solve technical problems, according to established procedures and guidelines. Works from instructions and handles exceptions on the basis of methods and precedents. Finds solutions and assists manager in prioritization and planning
Check compliance to procedures and guidelines regarding quality, safety and health across areas and teams not limited within own area / team, register performed checks and submit (defect) reports where necessary and/or take action in order to comply (e.g. PCCSIM). Follow ASML's EHS policies, procedures and mandatory instructions to identify and mitigate risks, and to safeguard the environment and the wellbeing of oneself and others

Fulltime

New

Pharmacy Technician

We’re building a world of health around every individual — shaping a more connec...

Location

United States , Drexel Hill

Salary:

Not provided

CVS Health

Expiration Date

June 22, 2026

Requirements

Must comply with any state board of pharmacy requirements or laws governing the practice of pharmacy, which includes but is not limited to, age, education, and licensure/certification
If the state board of pharmacy does not address or mandate a minimum age requirement, must be at least 16 years of age
If the state board of pharmacy does not address or mandate a minimum educational requirement, must have a high school diploma or equivalent, or be actively enrolled in high school or high school equivalency program
State-level licensure and national certification requirements vary by state, click here to learn more
Regular and predictable attendance, including nights and weekends
Ability to complete required training within designated timeframe
Attention and Focus
Customer Service and Team Orientation
Communication Skills
Mathematical Reasoning

Job Responsibility

Living our purpose by following all company SOPs at each workstation to help our Pharmacists manage and improve patient health
Following pharmacy workflow procedures at each pharmacy workstation (i.e., production, pick-up, drive-thru, and drop-off) for safe and accurate prescription fulfillment
Contributing to positive patient experiences by showing empathy and genuine care
Completing basic inventory activities, as permitted by law, and as directed by the pharmacy leadership team
Contributing to a high-performing team, embracing a growth mindset, and being receptive to feedback
Remaining flexible for both scheduling and business needs, while contributing to a safe, inclusive, and engaging team dynamic
Understanding and complying with all relevant federal, state, and local laws, regulations, professional standards, and ethical principles
Delivering additional patient health care services (e.g., immunizations, point-of-care testing, and voluntarily staffing offsite clinics), where allowable by law and supported by required training and certification
Where permissible, the Pharmacy Technician may also support immunizations, which includes the following responsibilities: Completing additional licensure and training requirements, in compliance with state Board of Pharmacy regulations, to obtain Technician Immunizer status to support preparing and administering vaccines
Educating patients about the importance of vaccines and referring patients to the Pharmacist-on-duty for vaccination questions

What we offer

medical, dental, and vision coverage
paid time off
retirement savings options
wellness programs
and other resources, based on eligibility

Fulltime

New

Mri Technologist

MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is see...

Location

United States , Springfield

Salary:

Not provided

MedPro Healthcare Staffing

Expiration Date

Until further notice

Requirements

Completion of a two year approved School of Radiologic Technology
Valid state radiology registration as required by state law
Registry by the American Registry of Radiologic Technology.

Job Responsibility

MRI technologists utilize their knowledge of anatomy, physiology and the principles of MRI to safely and efficiently operate MRI scanners, assisting in the diagnosis of disease and injury.
Ensure the safety of patients, staff and visitors who come in contact with the powerful magnetic field of a MRI scanner.
Position patients and coils on a table that slides inside the MRI scanner.
Inject contrast media as required.
Set appropriate technical parameters, operate MRI scanners and related equipment, and observe image data on computer monitors during scans.
Be familiar with the differences from a normal image and an abnormal image.
Recognize and respond to life threatening situations.
Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines.
Delivers quality, cost effective patient care in a professional manner.
Works effectively to maintain an environment of excellence, which is patient focused, providing timely, compassionate, quality patient care.

What we offer

Weekly pay and direct deposit
Full coverage of all credentialing fees
Private housing or housing allowance
Group Health insurance for you and your family
Company-paid life and disability insurance
Travel reimbursement
401(k) matching
Unlimited Referral Bonuses up to $1,000

Fulltime

New

Pharmacy Technician

We're building a world of health around every individual — shaping a more connec...

Location

United States , Oakville

Salary:

18.94 - 28.94 USD / Hour

CVS Health

Expiration Date

June 23, 2026

Requirements

Must be at least 16 years of age
Licensure requirements vary by state
Attention and Focus
Customer Service Orientation
Communication Skills
Mathematical Reasoning
Problem Resolution
Physical Demands
Visual Acuity
High School diploma or equivalent preferred but not required.

Job Responsibility

manage all assigned pharmacy workstations and tasks to support the team's ability to promptly, safely and accurately fill patient prescriptions
provide caring service that exceeds customer expectations

What we offer

dental
vision
wellness resources
employee discounts
access to certain voluntary benefits

Parttime

New

Cath Lab Registered Nurse

MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is see...

Location

United States , Denville

Salary:

Not provided

MedPro Healthcare Staffing

Expiration Date

Until further notice

Requirements

Active RN License
Degree from accredited nursing program
BLS & ACLS Certifications
Eighteen months of recent experience in an Acute Care Cath Lab setting

Job Responsibility

The Cardiac Cath Lab RN performs angioplasties, implants pacemakers and diagnoses cardiac conditions with an invasive catheterization procedure
Administer care for heart disease and heart attack patients by obtaining visual diagnostics of the arteries of the heart
Identify blockages, assisting the physician during procedures, and monitoring the patient’s status at other times
Administer interventional procedures like cardiac catheterizations, angioplasties, pacemaker and/or defibrillator implantation, and related interventional or diagnostic procedures

What we offer

Weekly pay and direct deposit
Full coverage of all credentialing fees
Private housing or housing allowance
Group Health insurance for you and your family
Company-paid life and disability insurance
Travel reimbursement
401(k) matching
Unlimited Referral Bonuses up to $1,000

YieldStar Production Engineer

ASML

Location:
Taiwan , Linkou

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 24, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for YieldStar Production Engineer