Wiring Harness Technician Job at Harbinger Motors (Garden Grove)

Harness Integration Technician

We are looking for a Wire Harness Technician. In this role, you will be highly f...

Location

United States , San Jose

Salary:

30.00 - 50.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

2–5+ years building wire harnesses and cable assemblies in manufacturing or prototyping environments
Strong ability to independently design and execute custom cable builds for test and prototype use
Ability to read prints/schematics and follow work instructions with minimal supervision
Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax, twisted pair)
Hands-on experience with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns
Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001
Strong quality and schedule focus, with high first-pass yield and low rework in fast-iteration environments

Job Responsibility

Build build-to-print and custom wire harnesses, including cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, and final terminations
Create custom cables and harnesses on demand to support test setups, debugging, EVT/DVT activities, and rapid hardware iteration, often with evolving or incomplete requirements
Partner closely with engineering and test teams to quickly translate test needs into practical cable and harness solutions
Read and follow drawings, schematics, BOMs, work orders, and ECOs
record traceability in ERP/routers
Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling
document pull tests when required
Print and apply labels and heat-shrink markers per print
Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMMs, cable testers, and fixtures
Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment

Fulltime

Harness Manufacturing Technician

ICEYE is the global leader in synthetic aperture radar (SAR) satellite operation...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Cable and harness assembly experience
Demonstrates 1–3 years of hands-on experience in cable or harness assembly (including internships or vocational projects), ideally within aerospace, electronics, or other high‑reliability environments.
Practical assembly skills
Proficient in crimping, soldering, wire stripping, lacing, and connector assembly, applying repeatable, high-quality workmanship to all harness builds.
Technical drawing and documentation literacy
Able to read and interpret assembly drawings, wiring tables, and work instructions accurately, and translate them into correct physical builds.
Workmanship standards application
Understands the fundamentals of workmanship standards such as IPC/WHMA‑A‑620 and can apply them in daily work
willing and able to build on this through formal training or certification.
Fine motor skills and attention to detail

Job Responsibility

Consistently deliver correctly assembled and installed wiring harnesses and cable assemblies that fully match drawings, specifications, and work instructions, requiring minimal rework.
Perform accurate inspections, continuity checks, and basic electrical tests on harness assemblies, reliably identifying and documenting any non‑conformances.
Apply IPC/WHMA‑A‑620 workmanship and quality standards in daily work, contributing to a measurable reduction in defects and improving first‑pass yield.
Support effective troubleshooting and rework of harness assemblies under supervision, resolving issues within agreed turnaround times.
Maintain complete, accurate, and traceable documentation, including traveler sheets and quality records, in line with internal processes and audit requirements.
Handle wires, connectors, shielding, and protective coverings with a high level of precision, ensuring mechanical robustness and electrical reliability of all produced harnesses.
Adhere to cleanroom and ESD handling procedures at all times, helping to prevent contamination or ESD‑related damage and ensuring a safe, compliant working environment.

What we offer

A job that matters in a dynamic Earth Observation environment with a scale-up approach
An independent role with a supportive and diverse work environment
Occupational healthcare, occupational, and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of choice
Relocation support (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus
A wide variety of the best coffee, tea, snacks, and sweets to accompany your daily space mission

Fulltime

Harness Integration Technician

Build production-quality wire harnesses from drawings/BOMs/work orders in a fast...

Location

United States , San Jose

Salary:

30.00 - 45.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

2–5+ years building wire harnesses/cable assemblies in manufacturing or prototyping
Ability to read prints/schematics and follow work instructions with minimal supervision
Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax/twisted pair)
Hands-on with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns
Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001
Strong quality and schedule focus: high first-pass yield and low rework

Job Responsibility

Build build-to-print harnesses: cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, final terminations
Read and follow drawings, schematics, BOMs, work orders, and ECOs
record traceability in ERP/routers
Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling
document pull tests when required
Print/apply labels and heat-shrink markers per print
Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMM/cable testers/fixtures
Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment
Maintain 5S/ESD and safety
suggest process and DFM improvements

Fulltime

Technician, Lv Wire Harness

The Technician, LV Wire Harness is responsible for assembling, testing, and insp...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

1–3 years of hands-on wiring or electrical assembly experience (automotive, aerospace, EV, industrial equipment, or similar)
Experience with generator sets, industrial equipment, or mobile power systems
Experience in pilot production, new product introduction (NPI), or R&D environments
IPC/WHMA-A-620 certification (Class 2 or Class 3) preferred
Basic soldering experience
Ability to read and interpret wiring diagrams, schematics, pinouts, and cable lists
Proficiency in crimping, stripping, terminal installation, and wire routing
Familiarity with low-voltage wiring harness design and manufacturing
Experience using electrical test equipment (e.g., multimeter, continuity tester)
Strong attention to detail and quality-focused mindset

Job Responsibility

Assemble low-voltage wiring harnesses using drawings, schematics, and work instructions
Cut, strip, crimp, splice, and terminate wires using approved tools and methods
Install connectors, terminals, boots, heat shrink, grommets, and labels per specifications
Route and bundle wiring using loom, braid, sleeving, clamps, and tie wraps following best practices
Support integration of harnesses into genset subassemblies as needed
Perform continuity, polarity, and basic functional testing on completed harnesses
Inspect crimps, terminals, pin retention, and insulation for quality and compliance
Verify wire colors, gauges, lengths, and connector orientation
Document defects and collaborate with quality teams to resolve nonconformances
Execute builds using job travelers, schematics, harness drawings, and bills of materials (BOMs)

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

Research Electro-mechanical Technician C

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Everett

Salary:

27.32 - 57.88 USD / Hour

Boeing

Expiration Date

August 14, 2026

Requirements

Experience with mechanical and electrical workflow
Experience reading and interpreting engineer drawings and technical data
Experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harnesses
or any variety of electrical components, and associated equipment
1+ year of experience working with hazardous materials

Job Responsibility

Fabricate, assemble, and test components of prototype aircraft instrumentation and ordnance equipment
Set up and operate required flight test equipment (e.g., wire bundles, sensors, strain gages) to perform functional or environmental tests on production and/or experimental
Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work order
Fabricate wire bundles used to connect various types of flight test computer equipment together, for the purpose of collecting and storing data during test flights
Perform tests such as vibration, thermal, humidity, or altitude using various computer systems, oscilloscopes, power supplies, and meters of various types under direction of lead and/or engineering. Install thermocouples, accelerometers, and strain gauges by soldering, bonding, or using mechanical fastening devices
Perform modification and repair of test equipment to meet engineering configuration, as required
Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander
Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Material Safety Data Sheets) using personal protective equipment as required

What we offer

health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly
fertility, adoption, and surrogacy benefits
up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

Research Electro-Mechanical Technician C

The Boeing Company is looking for a Research Electro-Mechanical Technician C to ...

Location

United States , Seattle

Salary:

27.32 - 57.88 USD / Hour

Boeing

Expiration Date

August 14, 2026

Requirements

Experience with mechanical and electrical workflow
Experience reading and interpreting engineer drawings and technical data
Experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harnesses
or any variety of electrical components, and associated equipment
1+ year of experience working with hazardous materials

Job Responsibility

Fabricate, assemble, and test components of prototype aircraft instrumentation and ordnance equipment
Set up and operate required flight test equipment (e.g., wire bundles, sensors, strain gages) to perform functional or environmental tests on production and/or experimental
Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work order
Fabricate wire bundles used to connect various types of flight test computer equipment together, for the purpose of collecting and storing data during test flights
Perform tests such as vibration, thermal, humidity, or altitude using various computer systems, oscilloscopes, power supplies, and meters of various types under direction of lead and/or engineering. Install thermocouples, accelerometers, and strain gauges by soldering, bonding, or using mechanical fastening devices
Perform modification and repair of test equipment to meet engineering configuration, as required
Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander
Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Material Safety Data Sheets) using personal protective equipment as required

What we offer

health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly
fertility, adoption, and surrogacy benefits
up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

Electrical Technician III

We are seeking a skilled and motivated EE Technician to join a hardware team foc...

Location

United States , Redmond

Salary:

29.00 - 39.00 USD / Hour

Apex Systems

Expiration Date

Until further notice

Requirements

AS/AA or BS degree in Electrical Engineering, Electronics Technology, or equivalent practical experience
3+ years of experience with electronic assembly and soldering, including (01005) and 0.35mm-pitch BGA components
Ability to operate standard lab test and measurement equipment such as oscilloscopes, DMMs, power supplies, signal generators, and LCR meters
Proficiency in reading and interpreting electrical datasheets, schematics, PCB layout drawings, and mechanical assembly drawings

Job Responsibility

Build, assemble, rework, and modify prototype PCBs and electronic assemblies, including fine-pitch SMD (01005) and 0.35mm-pitch BGA components
Test and repair units by running functional tests, performing visual inspections, and executing component or module exchanges to isolate failures
Document all work performed on each unit in a thorough and consistent manner
Create and maintain test fixtures, wiring harnesses, and cable assemblies for prototype evaluation
Maintain lab equipment, manage component inventory, and ensure lab safety standards are upheld
Adapt to a changing statement of work, prioritizing and balancing multiple tasks
Collaborate with design engineers for troubleshooting, clarification, and feedback
Propose and implement process improvements to increase production efficiency

What we offer

Medical
dental
vision
life
disability
other insurance plans
ESPP (employee stock purchase program)
401K program with company match after 12 months
HSA (Health Savings Account on the HDHP plan)
SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions

Electrical/Mechanical Integration Field Engineer

Amentum is seeking a motivated and technically capable Electrical/Mechanical Int...

Location

United States , China Lake

Salary:

75000.00 - 108000.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s degree in a STEM discipline preferred, with emphasis in Electrical Engineering, Electrical Engineering Technology, Systems Engineering, Mechanical Engineering, Physics, Applied Science, or a related technical field. Equivalent hands-on technical experience may be considered in lieu of degree
Minimum 2 years of hands-on field engineering, electrical troubleshooting, instrumentation, test, maintenance, installation, or hardware-integration experience in a relevant technical environment
Must be able to obtain and maintain a US Government Secret Clearance. Please note US Citizenship is required to obtain a Secret Clearance
Demonstrated experience troubleshooting electrical systems, low-voltage circuits, wiring harnesses, sensors, connectors, signal paths, grounding issues, continuity faults, intermittent failures, or instrumentation anomalies
Demonstrated ability to support hands-on mechanical integration tasks such as equipment installation, sensor mounting, bracket installation, enclosure installation, cable routing, hardware fit checks, and field modification support
Ability to read and interpret wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, technical specifications, and field work instructions
Proficiency with standard electrical test and measurement equipment, including multimeters, oscilloscopes, continuity testers, signal analyzers, data acquisition tools, or similar equipment
Working knowledge of low-voltage electrical systems, sensor interfaces, signal wiring, connectors, cable harnesses, termination practices, and basic fault-isolation techniques
Working familiarity with mechanical hardware installation practices, including fasteners, brackets, mounts, access constraints, cable management, strain relief, alignment, fit checks, and field redline documentation
Ability to document troubleshooting steps, field observations, discrepancies, test results, corrective actions, as-built conditions, and engineering recommendations clearly and accurately

Job Responsibility

Perform hands-on electrical installation, maintenance, troubleshooting, and repair of low-voltage systems, sensors, wiring harnesses, connectors, instrumentation, and associated field hardware
Support mechanical installation and integration activities involving brackets, panels, enclosures, equipment mounts, sensor mounts, cable supports, conduit, raceways, junction boxes, and related hardware
Interpret and work from wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, installation drawings, and field work instructions to support installation, verification, and fault isolation
Conduct electrical and mechanical inspections to verify that installed hardware conforms to design intent, drawing requirements, interface requirements, safety standards, and field installation constraints
Troubleshoot complex low-voltage circuits, signal paths, sensor networks, grounding issues, connector issues, intermittent faults, and instrumentation anomalies using appropriate test equipment including multimeters, oscilloscopes, continuity testers, signal analyzers, and data acquisition tools
Assist with fit checks, alignment checks, hardware walkdowns, cable-routing assessments, connector-access evaluations, and field verification of mechanical and electrical interfaces
Identify and resolve electrical, mechanical, and integration-related issues in the field using sound engineering judgment and disciplined problem-solving methodology
Document field observations, discrepancies, corrective actions, redlines, as-built conditions, test results, and recommended engineering updates accurately and thoroughly in accordance with program requirements
Participate in the development, review, and approval of electrical schematics, wiring diagrams, harness drawings, mechanical installation drawings, interface drawings, and technical specifications
Support design change processes by evaluating proposed electrical and mechanical modifications for technical feasibility, fit, form, function, signal integrity, safety, maintainability, and compliance with applicable standards

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Select Country

Wiring Harness Technician

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?