Wi-fi test Engineer for Lab Job at DCM Infotech Limited (Philadelphia)

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

New

Associate Domain Engineer

The purpose of the Associate Domain Engineer role is to investigate, diagnose an...

Location

Australia , Melbourne

Salary:

Not provided

Telstra

Expiration Date

March 11, 2026

Requirements

Degree qualification (or equivalent experience) in Engineering, Telecommunications, Networking, or a related discipline
Hands on experience with Wi Fi testing, RF lab environments, or broadband device validation
Strong analytical and troubleshooting skills
Experience with automated test systems and performance analysis tools
Ability to clearly document technical findings and test results
Strong communication and collaboration skills

Job Responsibility

Perform standards based Wi Fi performance validation on Telstra broadband devices prior to release
Execute automated and manual Wi Fi test cycles across multiple firmware versions
Analyse Wi Fi performance data and diagnose root causes of failures or inconsistencies
Conduct regression testing across firmware releases and compare results against baseline performance
Validate vendor supplied test results against internal laboratory methodologies
Collaborate with internal engineering teams and external vendors to resolve technical issues
Document test results, defects, and remediation actions using approved systems and processes
Support agile delivery through sprint based execution and structured defect management

What we offer

Flexible working
Additional Leave Day
Pay for performance
Parental Leave (16 weeks full pay or 32 weeks half pay)
Unlimited learning
Global presence
25% off Telstra products and services
Exclusive discounts from over 240 brands and partners

Fulltime

Senior/lead Test Engineer

As Padran Information Technologies, we are looking for teammates who are focused...

Location

Turkey , İstanbul;İzmir

Salary:

Not provided

Padran Information Technologies Inc.

Expiration Date

Until further notice

Requirements

MS/BS in Computer/Electrical/Electronics Engineering or similar field
Knowledge of test methodologies with at least 5 years of experience in developing and implementing end-to-end software product testing approaches
Networking Experience (TCP/IP, Wi-Fi, AWS, LAN/WAN) - Good understanding of general networking protocols (IEEE 802.11ac/ax/be, TR-398, etc.)
Experience with basic scripting languages (Python & Bash), Linux, Postman, Soap UI and Software Testing Methodologies
Experience with Mobile Application Testing
Familiarity working in Agile and cross-functional scrum teams
Good understanding of Software Test Management tools such as Jira, Xray, Confluence
Excellent analytic and problem-solving skills and Excellent team player
Mentor and guide junior team members of the test team, providing training and support as needed
Collaborate with cross-functional teams to prioritize testing efforts, resolve issues, and ensure alignment with project goals

Job Responsibility

Engage in discussions and collaboratively establish test strategies with the development team and product/program managers to assess the impact of a deliverable product or version
Review the specs & requirements, have a good understanding of the features, develop precise test cases and revise test plans accordingly
Design, implement and execute functional, stress and longevity tests from an end-to-end perspective
Identify, document, and track software defects, working closely with the development team to ensure their resolution
Utilize complex diagnostic and measurement tools such as Octobox, ixia, iperf, CD Router, Wireshark, etc.)
Provide clear defect definitions and reports to prevent miscommunication and streamline the resolution process
Guide the automation team to increase automation coverage by creating proper test automation development requests
On-time delivery of required QA facilities including detailed Test Report, Issue Analysis
Make sure products are being deployed on-scope and on-quality
Managing and maintaining the test houses and Wi-fi labs

What we offer

Opportunity to work with leading companies in Turkey
Opportunity to use industry-leading technologies with our business partners Microsoft, IBM, AWS and Open Text
Career development and certification opportunities as an ISTQB accredited training center

Fulltime

Compliance Testing Technician

We are seeking a detail-oriented and technically strong Compliance Testing Techn...

Location

United States , Hayward

Salary:

30.00 - 50.00 USD / Hour

1X Technologies

Expiration Date

Until further notice

Requirements

2–5 years of experience working in an EMC / EMI / RF compliance test lab environment
Familiarity with EMC, EMI, and RF testing equipment and methodologies
Working knowledge of relevant compliance standards (e.g., CISPR, FCC, IEC, ISO, or equivalent)
Experience collecting, analyzing, and reporting test data using Microsoft Excel
Strong written and verbal communication skills
Ability to work effectively in a fast-paced, dynamic environment with high variation in tasks
Demonstrated ability to collaborate across cross-functional engineering teams
Hands-on aptitude with lab instrumentation, fixtures, and test setups
Experience with radiated and conducted emissions testing (RE/CE), immunity testing (ESD, Radiated Immunity, EFT, surge, Conducted Immunity), and Flicker/Harmonics
Familiarity with pre-compliance testing and debug techniques

Job Responsibility

Procure, set up, and maintain compliance test equipment including fixtures, power supplies, data acquisition systems, cabling, antennas, and workstations
Prepare and connect Devices Under Test (DUTs) in accordance with EMC, EMI, and RF test plans
Execute, monitor, and document compliance tests in internal lab environments
Support and coordinate testing activities at third-party compliance laboratories
Troubleshoot test setups, equipment, and DUT issues during testing
Perform post-test teardown, inspection, and basic failure analysis
Collect, organize, and summarize test data and observations
Prepare clear test summaries and reports for engineering, quality, and regulatory stakeholders
Maintain organized test documentation and traceability to applicable standards
Collaborate closely with design, reliability, quality, and manufacturing teams to support compliance efforts

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Fulltime

New

Network Engineer III (Wifi)

The Network Engineer-III is responsible for the planning, design, configuration,...

Location

United States , Seattle

Salary:

91000.00 - 134000.00 USD / Year

Rackspace

Expiration Date

Until further notice

Requirements

High School Diploma or regional equivalent required
Bachelor's Degree required, preferably in Computer Science or Network Engineering
Minimum 5-7 years of recent experience with network design and build-out of LAN/WANs and/or large-scale network retrofits and remediations
Experience with network access control (NAC) and software-defined networking technologies, including Forescout and Cisco Software-Defined Access (SDA)
Experience with enterprise wireless technologies, including Wi-Fi design, deploying and maintaining Wi-Fi networks, RF optimization, and troubleshooting
Must have certifications: CCNA
Advanced level experience working with most of the following technologies/applications: MPLS, BGP, LDP, QoS, IPv6, OSPF, vPC, STP, DWDM, EVPN, L2VPN, MPLS VPN, L3VPN, FHRP, VLAN, CDP, port-channels, IS-IS, MPLS Inter-AS, VXLAN, DNS, ACL, RADb, Flowspec, RTBH, GitHub, API’s, NFV, Hypervisors, virtual switching
Multi-vendor experience working with the following platforms: Cisco IOS, ASR 1k (IOS-XE), ASR NCS (IOS-XR), Nexus (NX-OS), Arista (EOS), Junos
Experience working in a service provider, datacenter/hosting environment, or large-scale enterprise networks
Experience researching, evaluating, and recommending hardware and/or software solutions supporting large-scale deployments and/or remediations against the LAN/WAN

Job Responsibility

Perform design requirements feasibility studies
Perform vendor recommendation/selection and coordination for hardware testing and installations
Examine theoretical and implemented designs for deficiencies and facilitate corrections
Prepare maintenance plan documentation & change management
Examine maintenance plans for accuracy
Script maintenance implementations
Work in either a lead role or an assisting role during maintenance implementations
Develop Standard Operating Procedures (SOP’s) & Method of Procedures (MOP’s)
Develop network standardization practices
Document informational content for specialized network designs to be used for training needs

What we offer

Incentive compensation opportunities in the form of annual bonus or incentives, equity awards, and an Employee Stock Purchase Plan (ESPP)

Fulltime

New

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

New

Wireless Validation Engineer

We're looking for an expert, innovative, and self-starting Hardware & Wireless V...

Location

United States , Foster City

Salary:

110000.00 - 125000.00 USD / Year

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

Bachelor's degree in Electrical Engineering, Computer Engineering, Telecommunications, or a similar discipline
6+ years of professional, relevant work experience in electronics development
Hands-on experience configuring/programming wireless test platforms (Keysight, Rohde & Schwarz) and testing/troubleshooting Automotive Ethernet products
Expertise in Ethernet standards (IEEE 802.1AS, 802.11), IP network protocols, and 3GPP 4G-LTE / 5G-NR network architecture
Experience with Wi-Fi and Bluetooth Classic/LE protocol and PHY designs
Proficiency with lab equipment, including oscilloscopes, e-loads, VNAs, and spectrum analyzers
Experience with regulatory conformance testing and analyzing network diagnostics using tools like Wireshark and Qualcomm QXDM logs
Familiarity with Ethernet lab equipment (Ixia, Spirent) and associated software (IxNetwork, TTworkbench)

Job Responsibility

Conduct hands-on functional, performance, environmental, and reliability testing on both physical hardware and network systems
Select, procure, commission, and configure test equipment and software
Develop custom test assets such as load simulators, test harnesses, and scripts using Python and TTCN
Construct and maintain lab infrastructure, from fixed network test harnesses to RF cabling
Develop and execute test cases to analyze the behavior of wireless and fixed networks, including 4G-LTE, 5G-NR, Wi-Fi, Bluetooth, Ethernet, and IP
Collaborate with suppliers to validate network performance and identify the root cause of failures
Draft and present detailed documentation, including test plans, design reviews, and data reviews
Perform or commission conformance testing for international regulatory requirements, such as FCC emission compliance, PTCRB/GCF test suites, and U.S. MNO conformance testing

Fulltime

Senior Electrical Engineer

At Product Creation Studio, we are looking for a senior-level electrical design ...

Location

United States , Seattle

Salary:

Not provided

Product Creation Studio

Expiration Date

Until further notice

Requirements

7+ years experience as a design engineer developing custom electronics
BSEE
MS or Ph.D. a plus
Experience on multiple projects supporting new product introduction through all phases of development from concept to production
Experience with implementing design incorporating industry-standard peripherals such as Wi-Fi, USB, Bluetooth, RS232, and Ethernet
Experience integrating designs using 32-bit+ ARM, RISC, or PC architecture application processors or microcontrollers
Experience with implementing analog designs including filters and power conversion
Experience developing designs with industry-standard interfaces such as I2C, I2S, SPI, PCI, RS232
Experience designing for signal integrity and low EM emission and susceptibility
Experience optimizing designs for manufacturing including testability, component sourcing, life cycle, ease of assembly, and cost

Job Responsibility

Support and lead electrical engineering in all phases of product development that include scoping and project planning, assessing feasibility, identifying and de-risking technical elements, developing and validating product specifications, determining system architecture, detailed circuit design, testing and design validation, agency compliance, and manufacturing support
Design custom electronics performing schematic capture, source new components, simulate and perform circuit analysis, implement or direct printed circuit board layout, oversee PCBA fabrication, develop test plans and validate reliability and performance
Design for Safety and EMC agency compliance requirements, perform or oversee agency certification testing, and mitigate issues
Mentor and provide technical oversight of other electrical engineers
Scope and determine work breakdown on projects, identify high-risk elements and plan and perform rapid prototyping or technical feasibility studies
Coordinate and collaborate with clients, program management, and other engineering disciplines
Identify issues, new scope, errors, or unplanned tasks in the course or project execution work with project management and the client to incorporate updates to the project plan or modify requirements or deliverables to meet schedule and budget constraints
Make aggressive but achievable commitments and deliver designs that meet quality and performance requirements on schedule and on budget

What we offer

medical/dental/vision
FSA
401k
creative, friendly work environment

Wi-fi test Engineer for Lab

DCM Infotech Limited

Location:
United States , Philadelphia

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Requirements:

Additional Information:

Job Posted:
February 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Wi-fi test Engineer for Lab

Electrical Engineer II, RF Test Engineer

Associate Domain Engineer

Senior/lead Test Engineer

Compliance Testing Technician

Network Engineer III (Wifi)

Electrical Engineer II, RF Test Engineer

Wireless Validation Engineer

Senior Electrical Engineer

Wi-fi test Engineer for Lab

DCM Infotech Limited

Location:United States , Philadelphia

Category:IT - Software Development

Contract Type:Not provided

Salary:

Requirements:

Additional Information:

Job Posted:February 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Wi-fi test Engineer for Lab

Electrical Engineer II, RF Test Engineer

Associate Domain Engineer

Senior/lead Test Engineer

Compliance Testing Technician

Network Engineer III (Wifi)

Electrical Engineer II, RF Test Engineer

Wireless Validation Engineer

Senior Electrical Engineer

Location:
United States , Philadelphia

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 19, 2026