CrawlJobs Logo

Welding Inspector

United Kingdom, Bridgwater · Job Posted January 23, 2026
Apply Position
Job Link Share

Job Description

Reporting in to the Construction Superintendent, working as a Field Engineer / Welding Inspector (FE), you will carry out surveillance activities to ensure all works are delivered in line with requirements. You will be part of a wider team whose primary focus is to support the Team Lead responsibilities defined in the contract and ensure HPC Quality expectations are consistently met. You will be a strong advocate for Nuclear Safety Culture, helping embed this mindset across all processes and activities. Your scope will cover all works associated with the construction of your assigned project area, including continuous, notified and planned surveillance of the Works Contractors. You will also contribute to site‑wide matters, working closely with operational teams across the project. Accurate recording, reporting and distribution of surveillance findings to the Construction and Quality Teams will form a key part of the role.

Job Responsibility

  • Verify that works are delivered in accordance with contractual requirements and notify the Construction Superintendent of any non‑conformance request needs
  • Provide details to support the issuing of non‑conformance reports
  • Maintain strong communication with all site teams and ensure surveillance activities are promptly reported
  • Contribute surveillance data to support KPI measurements
  • Identify potential quality issues early and support mitigation actions
  • Assist the team in implementing temporary measures to maintain safety and quality, and take proportionate follow‑up actions (e.g. issuing communications, arranging meetings)
  • Ensure design decisions are not made informally on site and are escalated through the proper approval process
  • Maintain awareness of current and upcoming site activities
  • Ensure tasks are delivered to required health, safety and environmental standards
  • Develop and maintain an understanding of construction drawings, activities, Quality Control Plans and Quality Inspection Records
  • Ensure Quality Inspection Records are completed and accepted before works are covered up
  • Review Contractor performance against the approved Quality Control Plan

Requirements

  • Bachelor’s or Master’s degree in Mechanical Engineering
  • Welding Inspector qualification (CSWIP 3.1 or equivalent)
  • NDT Appreciation qualification
  • Good working knowledge of Quality Management practices, methods and processes
  • Experience in punchlist checks and QA/QC activities
  • Knowledge of documentation used in safety‑critical construction and fabrication environments (e.g., Inspection and Test Plans, End of Erection Status Reports)
  • Knowledge of the fabrication and installation of pressure systems
  • Good knowledge of pipework, tanks/vessels, steelwork and heat exchangers
  • Broad knowledge and understanding of the engineering / construction industry including materials, trades, methods and legal requirements
  • Excellent organisation, delegation and communication skills
  • Proven experience writing accurate, concise and contract‑relevant diaries
  • Strong attention to detail and ability to maintain quality standards in a high‑pressure environment
  • Ability to establish appropriate working relationships with contractors

Nice to have

  • Experience in large power plant design, manufacture and construction
  • Higher‑level welding qualifications (e.g., CSWIP 3.2, IWS)
  • Higher‑level NDT qualifications (e.g., PCN or equivalent)
  • Proven track record of working within a large construction team
  • Working knowledge of relevant British & European standards and construction/design codes/guidelines such as RCC‑M, BS EN and ASME
  • Experience in structural steel, welded pre‑fabricated reinforcement cages and civil/mechanical interfaces (depending on scope)
  • French language skills

What we offer

  • 25 Days Annual Leave + Bank Holidays
  • Buy & Sell Holiday
  • 8% Company Pension Contributions
  • Income Protection & 3x Salary Death-in-Service Cover
  • Competitive Sick Pay
  • Healthcare Cash Plan – Claim back on dental, optical & more
  • Free Digital Gym Access – Expert-led fitness classes
  • Exclusive Discounts – Restaurants, days out & top brands
  • 24/7 Employee Support Line – Mental health, financial & legal help
  • Cycle to Work Scheme
  • Free Flu Jabs & Eye Test Vouchers
  • Paid Professional Membership Fees
  • Volunteer Days

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Welding Inspector

8 matching positions

Welding Inspector & Robotic Welding Technician

Ensures weldments meet AWS D1.1 requirements and internal quality standards. Pro...
Location
Location
United States , Sheffield
Salary
Salary:
Not provided
sukup.com Logo
Sukup Manufacturing
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or GED required
  • Must pass a pre-employment GMAW basic weld skills assessment test with a completed test score be equal to, or greater than 89%
  • Must pass Jaeger J1 visual acuity exam prior to being hired
  • annually thereafter
  • Ability to read blueprints and interpret welding specifications in accordance with AWS A2.4
  • AWS/CWI (Certified Welding Inspector) preferred
  • Knowledge and/or experience with: AWS D1.1 Structural Steel Code
  • Yaskawa Motoman robot cells (NX100, DX100, DX200 or YRC1000 controllers)
  • Inspection tools
  • e.g., fillet gauges, V-Wac gauge, Skew-T gauge, calipers, micrometers, etc.
Job Responsibility
Job Responsibility
  • Ensure the quality of welded joints by visually inspecting before, during and after fabrication
  • Verify compliance with established welding procedures, welder qualifications, and code driven visual inspection criteria
  • Accurately identify defects and document inspection findings
  • Job changes, fixture swaps, setups and modifying existing robot programs
  • Optimize welding parameters, troubleshoot programming issues, and ensure weldments meet blueprint requirements
  • Ensure consistent, high-quality welds within a production environment
  • Conduct an established weld training program for newly hired welders
  • Communicate inspection findings to welders and provide guidance/ coaching to improve welding techniques
  • Actively contributes to a joint effort, working alongside each other to achieve welding excellence
  • Effectively communicate with engineering and quality teams to address non-conforming incoming parts and fit-up/ design concerns
  • Fulltime
Read More
Arrow Right

Nde inspector, certified welding inspector (cwi)

Are you ready to start “Building America”? At Lexicon, we're seeking a skilled N...
Location
Location
United States , Little Rock
Salary
Salary:
Not provided
lexicon-inc.com Logo
Lexicon, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalency certificate
  • Previous fitting and welding experience is required
  • Must be able to read and understand blueprints and shop drawings and pass an inspector test
  • Must be able to perform basic math such as addition, subtraction, multiplication, division, geometry and some trigonometry
  • Current American Welding Society (AWS) Certified Welding Inspector (CWI) certification
  • OR Currently certified Level II in at least two NDE Methods (VT), (PT), (MT), (UT) to ASNT SNT-TC-1A or equivalent qualification
Job Responsibility
Job Responsibility
  • Perform internal and external inspections to determine if a weldment/structure meets the acceptance criteria of a specific code, standard, or document
  • Interpret codes and specifications in accordance with the drawing requirements
  • Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications
  • Recommend and approve repairs as well as perform visual inspection of work in progress and completed work
  • Monitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), submerged arc welding (SAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures
  • Verify and document welder qualifications
  • Verify the compliance of base metals with the applicable specifications
  • Appraise welding joint designs and joint preparations for compliance with drawing
  • Verify proper fit, cleanliness, and environmental conditions
  • Verify tack weld quality
What we offer
What we offer
  • Health, Dental, Vision, and Life Insurance
  • HSA with employer contributions
  • Life Insurance
  • Paid Holidays and Vacation
  • 401k with company match
  • Lexicon University
  • Fulltime
Read More
Arrow Right

Qa/qc Inspector (Welding)

Location
Location
China , Qingdao
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Higher National Diploma (HND) or Diploma in Mechanical, Welding, Metallurgy, or equivalent
  • Certification as AWS SCWI, CSWIP 3.2 Senior Welding Inspector, or equivalent
  • ASNT Level II certification in NDT methods (VT, MT, PT, RT, UT)
  • Strong knowledge of international codes and standards including AWS, API, ASME, ASNT, EN, DEP, and ISO
  • Proficient in MS Office and database management systems
  • Minimum 10 years of welding and NDT inspection experience, including at least 5 years post-certification within the Oil & Gas industry
  • Minimum 5 years of offshore project experience
  • Proven experience in inspection and testing for major oil & gas projects, including offshore process platforms and jackets across all phases (manufacturing, fabrication, construction, and installation)
  • Experience in inspection of structures, piping, offshore pipelines, and materials across various welding processes
  • Familiarity with advanced NDT techniques such as UT, AUT, and PAUT
Job Responsibility
Job Responsibility
  • Ensure quality requirements for fabrication, construction, and installation activities are implemented in accordance with approved quality procedures, plans, and project documentation
  • Verify that contractors, subcontractors, and vendors deploy competent resources, follow internationally accepted practices, and deliver products compliant with corporate and project quality standards
  • Participate in inspection, surveillance, and audit activities involving contractors, subcontractors, vendors, manufacturers, suppliers, and third-party inspection and certification bodies
  • Review and verify project quality documentation, including Inspection & Test Plans (ITPs), Method Statements, Work Procedures, and WPS/PQR documents
  • Confirm personnel qualifications and ensure calibration status of inspection equipment is valid
  • Attend material receiving inspections and review Material Test Certificates (MTCs)
  • Monitor welding activities at site and fabrication yards to ensure compliance with approved Welding Procedure Specifications (WPS)
  • Attend Procedure Qualification Record (PQR) mechanical testing and witness welder qualification tests, including evaluation of visual inspections and NDT results
  • Witness and interpret daily NDT activities at site and fabrication yards, and assess inspection findings
  • Participate in dimensional control inspections, including laser survey inspections where applicable
  • Fulltime
Read More
Arrow Right

Field Engineer - Welding Inspector (NDT)

Role: Field Engineer - NDT Welding Inspector. Position: Contract. Location: Hink...
Location
Location
United Kingdom , Bridgwater
Salary
Salary:
350.00 - 475.72 GBP / Day
rullion.co.uk Logo
Rullion
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • CSWIP 3.1 Welding Inspector certification minimum
  • PCN-certified NDT qualification(s)
  • Experience in welding inspection on large construction projects
  • Background in nuclear, power, petrochemical, oil & gas or other regulated industries
  • Strong understanding of: RCC-M, ASME, BS EN standards
  • Experience with: ITPs, NCRs, QA/QC documentation, Quality surveillance activities
Job Responsibility
Job Responsibility
  • Conduct welding and NDT quality surveillance activities on site
  • Review contractor compliance against approved Quality Control Plans and ITPs
  • Identify non-conformances and support NCR generation
  • Ensure inspection records are completed before works are covered up
  • Monitor welding, fabrication and installation activities against required standards
  • Support proactive quality issue identification and mitigation
  • Liaise with construction, QA/QC and contractor teams across site
  • Ensure formal quality processes are followed at all times
What we offer
What we offer
  • Competitive day rate
  • 36 days annual leave
  • Long-term contract potential
  • Opportunity to contribute to the UK's most complex and high-profile clean energy project
  • Work alongside some of the most skilled professionals in the industry
  • Gain exposure to cutting-edge construction and engineering methods
  • Develop your career within one of the world's most demanding project environments
  • Fulltime
Read More
Arrow Right

Certified Welding Inspector (CWI)

The Certified Welding Inspector (CWI) is responsible for ensuring welded product...
Location
Location
United States , Clackamas
Salary
Salary:
70000.00 - 90000.00 USD / Year
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Current AWS Certified Welding Inspector (CWI) certification required
  • Minimum of 3 years of experience in welding inspection or related quality assurance role preferred
  • Strong knowledge of welding processes, metallurgy, and applicable industry codes and standards
  • Ability to read and interpret engineering drawings, welding procedures, and technical documentation
  • Experience with aerospace welding standards including AWS D17.1
  • Familiarity with ISO 9001, NADCAP, or similar quality management systems preferred
  • Experience with non-destructive testing methods preferred
  • Strong written and verbal communication skills with excellent attention to detail
  • Proficiency with digital inspection tools and quality reporting systems preferred
  • ITAR – Must be a US Citizen
Job Responsibility
Job Responsibility
  • Perform detailed visual inspections of welds to verify compliance with AWS, ASME, and applicable industry standards
  • Review welding procedures, welder qualifications, and material certifications for compliance with specifications and requirements
  • Identify weld defects or inconsistencies and recommend corrective actions to maintain product integrity and safety
  • Prepare inspection reports and maintain accurate quality documentation and records
  • Collaborate with welding, engineering, and quality teams to support continuous improvement initiatives and quality objectives
  • Interpret engineering drawings, welding procedure specifications (WPS), and technical documentation
  • Follow Business Technology policies to protect sensitive data and reduce information security occurrences
What we offer
What we offer
  • Medical, Dental, and Vision paid for by employer
  • Paid life insurance
  • 401k
  • AD&D
  • PTO and Sick time
  • Yearly Bonus
  • Fulltime
Read More
Arrow Right

Inspector-welding

We are a world leader in Testing, Inspection and Certification (TIC) , deliverin...
Location
Location
Qatar , doha
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • CSWIP 3.1/3.2 CWI certification
  • Knowledge of AWSD1.1
  • Knowledge of API RP2X
  • Knowledge of ASME IX
  • Knowledge of ASME V
  • Knowledge of ASME VIII
  • Knowledge of API 650
Job Responsibility
Job Responsibility
  • Reviewing WPS,PQRS and welder qualifications
  • Confirming that correct WPS is applied per weld map
  • Witnessing mechanical and/or radiographic testing of weld qualifications
Read More
Arrow Right

Field Engineer - Welding Inspector

We employ the UK's most experienced and skilled technical services professionals...
Location
Location
United Kingdom , Bristol
Salary
Salary:
Not provided
amentum.com Logo
Amentum
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Mechanical Engineering, Materials, Welding qualifications or equivalent vocational training and experience
  • Broad knowledge and wide understanding of the Engineering Construction industry, materials, trades methods and legal requirements
  • Excellent organisation, delegation, and good communication skills
  • Proven experience of writing diaries which are accurate, concise and with relevance to the particular form of contract
  • Proven track record of working within a large construction team
  • Good attention to detail when checking work and materials
  • And the ability to maintain quality standards in a high-pressure environment
  • Able to establish appropriate working relationships with the contractors
  • Working knowledge of relevant British & European standards, construction and design codes/guidelines such as RCC-M, BS EN and ASME
Job Responsibility
Job Responsibility
  • Check the Works are constructed in accordance with the contract and notify the Construction Superintendent of non-conformance request requirements
  • Submit details of any non-conformance request requirements to assist in the issuing of non-conformance reports
  • Proactively communicate with other site teams, maintain good communication links and ensure surveillance is timely reported
  • Contribute surveillance information to support KPI indicators
  • Endeavour to identify potential Quality issues before they arrive to enable mitigating actions
  • Support team instructions to take temporary measures to mitigate and keep works safe and within Quality standards. Follow up by taking appropriate and proportionate action (e.g. issue communications, call meetings) to prevent the halt of works
What we offer
What we offer
  • Free single medical cover and digital GP service
  • Family-friendly benefits such as enhanced parental leave pay
  • Free membership of employee assistance and parental programmes
  • Reimbursement towards relevant professional development and memberships
  • Matched-funding through Collectively program
  • Paid volunteering time
  • Charitable donations
  • Fulltime
Read More
Arrow Right

Certified Welding Inspector

The BAE Systems is seeking a Certified Welding Inspector to join its organizatio...
Location
Location
United States , Aiken
Salary
Salary:
70735.00 - 120250.00 USD / Year
baesystems.com Logo
Baesystems
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • AWS CWI
  • Inspect weldments to various code requirements
  • High School Diploma with 2+ years of experience OR equivalent education/experience in quality/inspection/welding/NDT/etc.
  • Proficient using MS Suite including Excel, Word, PowerPoint, etc.
  • Ability to read, interpret and work to blueprints
  • Working knowledge/experience in GD&T principles and applications
  • Ability to read and comprehend raw material specifications
Job Responsibility
Job Responsibility
  • Read and work to blueprints
  • Inspect weldments to various weld codes
  • Apply Geometric Dimensioning & Tolerancing (GD&T) concepts
  • Process non-conformances for disposition
  • Provide technical quality support to production and engineering
  • Perform welding inspections (VT, MT, PT)
What we offer
What we offer
  • health, dental, and vision insurance
  • health savings accounts
  • a 401(k) savings plan
  • disability coverage
  • life and accident insurance
  • employee assistance program
  • legal plan
  • discounts on home, auto, and pet insurance
  • paid time off
  • paid holidays
  • Fulltime
Read More
Arrow Right