CrawlJobs Logo

Welder

hermeus.com Logo

Hermeus

Location Icon

Location:
United States , Los Angeles

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

As a Welder, you will play a key role in fabricating, assembling, and joining structural and piping components critical to our production and mission operations. You’ll work closely with engineering and manufacturing teams to execute precise, high-quality welds across a variety of materials, ensuring all products meet rigorous performance and safety standards. This role is hands-on and suited for an experienced professional who thrives in a fast-paced, technical, and safety-focused environment.

Job Responsibility:

  • Perform precision TIG, MIG, and arc welding on carbon steel, stainless steel, and high-nickel alloys
  • Interpret engineering drawings and welding symbols to ensure dimensional accuracy and conformance
  • Execute high-precision laser welding on thin-gauge and high-strength alloys, maintaining tight control of heat input, distortion, and weld integrity in mission-critical hardware
  • Fabricate, assemble, and pressure-test structural and piping systems supporting aerospace and defense operations
  • Maintain compliance with ASME, AWS, and company weld standards, following approved procedures
  • Uphold strict safety, cleanliness, and quality standards in all work areas
  • Collaborate with engineering, quality, and production teams to resolve fabrication challenges
  • Support continuous improvement initiatives and contribute to process optimization

Requirements:

  • High school diploma or GED
  • technical welding certification preferred
  • 5+ years of experience in aerospace, defense, or high-precision fabrication
  • Skilled in blueprint interpretation and all-position welding (flat, horizontal, vertical, overhead)
  • Proven ability to fabricate and weld carbon and stainless structures and pipe to spec
  • Must pass company-administered weld qualification tests and internal inspections
  • Available to work overtime and varied shifts to meet mission timelines
  • Physically able to lift 50 lbs, work at heights, and operate in confined or outdoor environments

Nice to have:

  • 5+ years of GTAW welding experience with stainless, carbon, Inconel, aluminum, or titanium
  • Knowledge of ASME Section IX, AWS D17.1, or MIL-STD welding codes
  • Experience in aerospace component fabrication or ground support systems
  • Skilled in tube and pipe cutting, grinding, and precision assembly
  • Familiar with pressure testing, inspection, and NDE methods
  • Proficient with precision measuring instruments and quality documentation
  • Understanding of welding metallurgy and heat control for high-integrity welds
  • Familiarity with advanced tooling and fixturing practices used in precision welded assembly fabrication

Additional Information:

Job Posted:
February 18, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Hermeus - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Welder

1st Class Pipe Welder

We are seeking a dedicated Pipe Welder with at least 1 year of Tig/Flux pipe wel...
Location
Location
United States , Houma
Salary
Salary:
Not provided
bollingershipyards.com Logo
BOLLINGER MISSISSIPPI SHIPBUILDING LLC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 1 year of Tig/Flux pipe welding experience
  • Pass a hands-on Tig/Flux pipe welding test on pipe in a 6G position on 2” pipe with 3/32” wall thickness using a gas purge with a 1/8” root opening
  • All welds must be performed with uphill weld progression and finished using GTAW (Tig/Flux)
  • Proficiency in Tig and Flux Core Arc Welding (FCAW) techniques
  • Strong understanding of welding procedures and best practices
  • Ability to read and interpret construction drawings and technical guidance documents
  • Precision and attention to detail in welding tasks
  • Good problem-solving skills and ability to work independently or as part of a team
  • Knowledge of safety protocols and practices in a welding environment
Job Responsibility
Job Responsibility
  • Prepare and weld pipe and fittings for various material types according to construction drawings and technical guidance documents
  • Ensure high-quality welds that meet industry standards and specifications
  • Follow safety protocols and maintain a safe working environment
What we offer
What we offer
  • Competitive Pay
  • Comprehensive Benefits Package
  • Pay for Skills
  • Career Development
  • Cutting-Edge Projects
  • Positive Work Environment & Company Values
Read More
Arrow Right

1st Class Pipe Welder

For nearly a century, Bollinger Shipyards has created a legacy as a leading desi...
Location
Location
United States , Houma
Salary
Salary:
Not provided
bollingershipyards.com Logo
BOLLINGER MISSISSIPPI SHIPBUILDING LLC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 1 year of Tig/Flux pipe welding experience
  • Pass a hands-on Tig/Flux pipe welding test on pipe in a 6G position on 2” pipe with 3/32” wall thickness using a gas purge with a 1/8” root opening. All welds must be performed with uphill weld progression and finished using GTAW (Tig/Flux)
  • Ability to work night shifts
Job Responsibility
Job Responsibility
  • Prepare and weld pipe and fittings for various material types according to construction drawings and technical guidance documents
  • Ensure high-quality welds that meet industry standards and specifications
  • Follow safety protocols and maintain a safe working environment
What we offer
What we offer
  • Competitive Pay
  • Comprehensive Benefits Package
  • Pay for Skills
  • Career Development
  • Cutting-Edge Projects
  • Positive Work Environment & Company Values
  • Fulltime
Read More
Arrow Right

Structural Welder

Welders are the foundation of our fabrication excellence, ensuring every metal j...
Location
Location
United States , Henderson
Salary
Salary:
26.00 - 35.00 USD / Hour
rkindustries.com Logo
RK Mechanical, Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3G certified in welding
  • Proficient in basic welds meeting quality standards
  • Ability to perform intermediate math
  • Basic knowledge of weld symbols
  • Follows direction and completes tasks under close supervision
  • 3–5 years of welding and metal processing experience (Welder 2)
  • Certified in 3G and able to obtain 6G certification
  • Proficient in FCAW and GMAW across multiple transfer modes
  • Can weld light metals and medium-complexity components
  • Proficient in reading and interpreting blueprints
Job Responsibility
Job Responsibility
  • Operate welding machinery and equipment specific to trade
  • Interpret job orders, cut lists, and blueprints
  • Read and use a tape measure accurately
  • Select the proper machine and sequence of operations
  • Perform welds to required quality and code standards
  • Inspect work and document compliance
  • Operate forklifts and overhead cranes
  • Comply with safety and shop rules
  • Maintain and troubleshoot welding equipment
  • Perform other assignments as directed
What we offer
What we offer
  • $1,000 sign-on bonus
  • Up to $5,000 in relocation assistance
  • Access to cutting-edge training and tools
  • Competitive benefits to support your growth and well-being
  • Hands-on training and development opportunities through RK University
  • Accredited apprentice program
  • Fulltime
Read More
Arrow Right

Aluminum Welder

SIGMADESIGN has collaborated with a local industrial company seeking experienced...
Location
Location
United States , Vancouver
Salary
Salary:
25.56 - 34.13 USD / Hour
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Welder I: Minimum five to seven years’ welding/fabrication experience or apprentice program
  • Welder II: Minimum of two years’ welding/fabrication experience or apprentice program
  • Welder III: Minimum of one year welding/fabrication experience or apprentice program
  • Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards
  • Able to consistently pass UT/RT/PT weld joints
  • Compliance: Drug Screen, Background Check, must be US Citizen
  • Ability to lift, carry 60lbs., or maneuver objects
  • Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine
  • Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb
  • Capable of working from ladders and scaffolding
Job Responsibility
Job Responsibility
  • Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat
  • Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment
  • Assemble and tack parts as directed by supervisor
  • All other duties as assigned
What we offer
What we offer
  • Multiple options for medical, dental and vision including some with HSA and FSA options
  • life and disability insurance
  • EAP
  • 401K
  • PTO and 10 paid holidays
  • Career growth – Growing department. Lead positions potentially available in future for the right candidate
  • Fulltime
Read More
Arrow Right

Temporary Journeyperson Welder

Temporary Journeyperson Welder position at Syncrude Base Mine for Acden, an Indi...
Location
Location
Canada
Salary
Salary:
Not provided
acden.com Logo
Acden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Journeyperson Welder certification
Read More
Arrow Right

Welder

Coherent Technical Services, Inc. (CTSi) is seeking a Welder to perform welding ...
Location
Location
United States , Hollywood
Salary
Salary:
Not provided
goctsi.com Logo
Coherent Technical Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma/GED
  • 3 Year of experience as a commercial welder
  • Current and valid certification(s) a plus
  • Perform MIG, TIG and other types of weld methods based on project requirements
  • Read and interpret project plans, blueprints and other written instructions and diagrams to perform task at hand
  • Good knowledge & understanding of heat applications, heat absorbents during welding operations to prevent warpages of parts
  • General knowledge of shop practices including layout, drilling, sawing, grinding, etc.
  • Ability to lift up to 75 lbs on a daily basis
  • Must wear approved PPE (personal protective equipment)
  • Must be able to work overtime, weekends, and other shifts as required
Job Responsibility
Job Responsibility
  • Perform welding processes on aluminum, steel and stainless parts and assemblies to the required job tolerances
  • Must have knowledge of weld symbols, process and layout requirements on welded parts and assemblies according to engineering drawings and specifications
  • May monitor and verify quality in accordance with statistical process or other control procedures
  • Fulltime
Read More
Arrow Right

Welder

We are partnering with a trusted construction firm in British Columbia looking f...
Location
Location
Canada , British Columbia
Salary
Salary:
Not provided
hirez.ca Logo
Hirez Manpower Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Red Seal Certification as a Welder in British Columbia (preferred but not mandatory)
  • At least 3 years of welding experience in construction or fabrication
  • Proficiency in MIG, TIG, and stick welding techniques, with experience in steel, aluminum, and stainless steel welding
  • Ability to work in physically demanding environments, including lifting heavy materials, working at heights, and exposure to heat
Job Responsibility
Job Responsibility
  • Follow all safety guidelines, including the use of personal protective equipment (PPE), to maintain a safe work environment
  • Maintain welding tools and equipment to ensure proper functioning
  • Ensure all baked goods meet quality standards for both taste and appearance
  • Prepare and clean metal surfaces for welding by cutting, grinding,and shaping materials as required
  • Read and interpret blueprints and welding drawings to ensure precision in all welds
  • Perform welding tasks using MIG, TIG, and stick welding techniques to assemble and repair metal structures
What we offer
What we offer
  • Competitive hourly wage based on experience and qualifications
  • Opportunities for professional development, including certifications
  • Health, dental, and retirement benefits
  • Flexible Work Schedule
  • 8-hour shifts
  • Day, evening, and morning shifts available
  • Monday through Friday, with potential weekend shifts
  • Fulltime
Read More
Arrow Right

Welder

If you like working with your hands, a career in welding won’t disappoint. Every...
Location
Location
Salary
Salary:
Not provided
kloecknermetals.com Logo
Kloeckner Metals Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3 years prior experience in a fabrication facility or a recent graduate from a welder certification program with a welding certification in GMAW as specified by (AWS D1.1 Structural Welding Code)
  • Candidate must maintain a clean/orderly work area at all times
  • Candidate must adhere to all safety policies and procedures in place at the facility
  • Candidate must complete all training sessions as required
Job Responsibility
Job Responsibility
  • Fabricating and welding products to the drawings and production voucher specifications using the correct materials and to the appropriate welding procedures
  • select the proper sequence of fitting and welding to meet the specifications of the quality program and due dates as assigned
  • post inspect welded assemblies produced to insure tolerances
  • maintain high-quality results
  • complete the appropriate quality documentation and production voucher information
  • flame/plasma bevel precision parts to customer drawings and tolerances
What we offer
What we offer
  • Medical, Dental, and Vision Insurance
  • Life, Accident, and Disability Insurance
  • Flexible Spending Accounts
  • Legal Plan
  • Pet Insurance
  • 401(K) Plan
  • Annual Bonus Opportunity
  • Tuition reimbursement
  • Employee Discounts
  • Paid Time Off (PTO) Program
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy