Welder in training Job at Herbruck Poultry Ranch (New York Mills)

New

Welder (Temp To Hire)

The responsibility of the Welder is to set-up and perform a variety of welding, ...

Location

United States , Batesville

Salary:

23.32 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

Must Pass Weld test (MIG)
Successfully complete GMAW School
High School Diploma or (GED) General Education Degree

Job Responsibility

Check during assembly for proper weld location and size, proper fit, and operation of sliding or rotating parts
Make repairs when necessary
Check for weld spatter, burn-thru, and other visible weld defects and remove or repair when necessary
May require use of oxyacetylene or plasma arc cutting torches or automatic programmable welder
Check completed work per job instructions and print specifications
Properly set and adjust all welding parameters to maintain quality welds
Also load and assist in welding wire (spool) changes
Perform all job set-ups, rework on painted parts and finished products and must be willing to perform all other operations in the department
Perform minor repairs and preventative maintenance of welding equipment and fixtures
May be required to record measurements

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave
Commuting benefits

Fulltime

New

Nde Inspector, Certified Welding Inspector (Cwi)

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled N...

Location

United States , Little Rock

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate
Must be able to read and understand blueprints and shop drawings and pass an inspector test
Must be able to perform basic math such as addition, subtraction, multiplication, division, geometry and some trigonometry
Currently certified Level II in at least two NDE Methods (VT), (PT), (MT), (UT) to ASNT SNT-TC-1A or equivalent qualification

Job Responsibility

Perform internal and external inspections to determine if a weldment/structure meets the acceptance criteria of a specific code, standard, or document
Interpret codes and specifications in accordance with the drawing requirements
Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications
Recommend and approve repairs as well as perform visual inspection of work in progress and completed work
Monitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), submerged arc welding (SAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures
Verify and document welder qualifications
Verify the compliance of base metals with the applicable specifications
Appraise welding joint designs and joint preparations for compliance with drawing
Verify proper fit, cleanliness, and environmental conditions
Verify tack weld quality

What we offer

Health, Dental, Vision, and Life Insurance
HSA with employer contributions
Life Insurance
Paid Holidays and Vacation
401k with company match
Lexicon University provides free career development and training

Fulltime

Operator V - Molding (3rd Shift)

This is where my hands make life-sustaining products As a key member of the Mol...

Location

United States , Cleveland

Salary:

19.38 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

High school diploma required
Additional technical experience, training, or education a plus
Basic knowledge of quality and safety procedures and regulations a plus
Mechanical proficiency required
Familiarity with Allen Bradley controls a plus
Capability to comprehend and interpret computer control documents and specifications
Computer proficient and ability to use software applications
Ability to read and understand specifications and procedures
Able to complete documentation legibly
Trained as forklift driver preferred

Job Responsibility

Operate assembly equipment in Molding department
Set-up machine parameters per operating procedures
Perform line clearance, quality checks and required mechanical adjustments to machine
Responsible for raw materials, printing and packaging materials are ready for production
Challenge vision system, USON Tester, Welders, and Silicon system per operating procedures
Use blueprints, specifications, Bill of Materials, and Standard Operating Procedures to ensure product or process acceptability
Report abnormalities and corrective action to supervision
Stack-off master cartons and move finished goods with forklift
Troubleshoot equipment and make required adjustments/minor equipment repairs as needed
Follow Good Documentation Practices

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Maintenance General

Maintenance, repair, modification and installation of plant equipment, and struc...

Location

United States , Waverly

Salary:

33.00 USD / Hour

Nestlé Purina

Expiration Date

Until further notice

Requirements

High School Diploma or GED preferred
Basic mechanical background, cutting and welding knowledge
Trade school or military training helpful
Understanding of basic electricity, its application in an industrial setting
Power and hand tools, various cutting and welding equipment and electrical testing equipment.

Job Responsibility

Repair and preventative maintenance of plant processing equipment, troubleshooting electrical problems, instrument controllers, installation of conduit, lift trucks and equipment overhaul
Repair and preventative maintenance of plant support systems, such as compressed air, steam, water, sewer, heating, ventilation and air conditioning etc. (refrigeration ammonia)
Fabrication and repair, working with the variety of materials found throughout the equipment and structure
Stainless steel fabrication and repair
Aluminum fabrication and repair
Ferrous metals fabrication and repair
Industrial coatings, preparation for and application of
Proper applications of caulking and grouting materials
Utilization of assorted welding and cutting equipment
Tig and stick welding

What we offer

401k with company match
Benefits (Medical, Dental, Vision)
Insurance eligibility begins on 31st day of employment
11 paid holidays
$3000 Sign on Bonus

Fulltime

Operator V - Molding (3rd Shift)

Your Role at Baxter This is where my hands make life-sustaining products As a ...

Location

United States , Cleveland

Salary:

19.38 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

High school diploma required
Additional technical experience, training, or education a plus
Basic knowledge of quality and safety procedures and regulations a plus
Mechanical proficiency required
Familiarity with Allen Bradley controls a plus
Capability to comprehend and interpret computer control documents and specifications
Computer proficient and ability to use software applications
Ability to read and understand specifications and procedures
Able to complete documentation legibly
Trained as forklift driver preferred

Job Responsibility

Operate assembly equipment in Molding department
Set-up machine parameters per operating procedures
Perform line clearance, quality checks and required mechanical adjustments to machine
Responsible for raw materials, printing and packaging materials are ready for production
Challenge vision system, USON Tester, Welders, and Silicon system per operating procedures
Use blueprints, specifications, Bill of Materials, and Standard Operating Procedures to ensure product or process acceptability
Report abnormalities and corrective action to supervision
Stack-off master cartons and move finished goods with forklift
Troubleshoot equipment and make required adjustments/minor equipment repairs as needed
Follow Good Documentation Practices

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Basic life, accident, short-term and long-term disability insurance
Business travel accident insurance
Flexible Spending Accounts
Educational assistance programs

Fulltime

Operator V - Molding (3rd Shift)

As a key member of the Molding department, you will operate and support assembly...

Location

United States , Cleveland

Salary:

19.38 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

High school diploma required
Mechanical proficiency required
Ability to read and understand specifications and procedures
Able to complete documentation legibly
Low absenteeism
Must be able to work overtime as required
Meet visual acuity requirements as documented in the Baxter Cleveland Visual Acuity procedure CL-01-01-037
Audiometric testing and hearing protection required
Ability to bend, stoop and climb ladders
Stand for long periods of time

Job Responsibility

Operate assembly equipment in Molding department
Set-up machine parameters per operating procedures
Perform line clearance, quality checks and required mechanical adjustments to machine
Responsible for raw materials, printing and packaging materials are ready for production
Challenge vision system, USON Tester, Welders, and Silicon system per operating procedures
Use blueprints, specifications, Bill of Materials, and Standard Operating Procedures to ensure product or process acceptability
Report abnormalities and corrective action to supervision
Stack-off master cartons and move finished goods with forklift
Troubleshoot equipment and make required adjustments/minor equipment repairs as needed
Follow Good Documentation Practices

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

TDY Traverse Operations Supervisor

Amentum is a global leader in advanced engineering and innovative technology sol...

Location

United States , Centennial

Salary:

73.81 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s Degree is required. An additional four years of relevant experience will be accepted in lieu of a degree.
Minimum of four years’ experience in a polar guide, management or field operations role
Two of the four years’ experience must be in a supervisory or leadership role.
Demonstrated ability to work with and independently manage, a multiple skilled work force.
Good verbal communication and problem-solving skills are required.
Team player and group dynamics are of the utmost importance.
Demonstrated ability to work and supervise in a remote and isolated environments
Willingness and ability to deploy to Antarctica for extended periods
Successful completion of Medical and Dental examinations required by the NSF for deployment to Antarctica
Successful completion of drug screening and background check required by employer

Job Responsibility

Responsible for problem solving, navigation, supervision of ground penetrating radar (GPR) operations, analysis of GPR images, coordination of air support, supervision of ASC employees and camp visitors, cooking, communications, weather observation, cargo movement, equipment operation, repair and maintenance, trail maintenance, crew briefings, safety tailgate meetings, constant hazard assessment, route hazard mitigation, detailed record keeping, employee evaluations, end of season reporting and public presentations of traverse information.
Adheres to planned traverse pace and identified field tasking, within reason. Works directly with ASC and NSF management to ensure all parties are informed of current status and any changes to the schedule or tasking.
Ensures that all personnel operating the GPR are fully trained and following all procedures at all times. Determines if crevasses encountered on the trail are safe to cross using several methods (GPR analysis, hot water drill exploration, possibly with the use of explosives and through the use of formulas and standards provided by engineers).
Uses sound judgment in conducting all traverse operations in accordance with the Standard Operating Procedures, company policies, and objectives. Communicates daily progress to the Traverse Operations Manager, Science Traverse Supervisor and/or Field Operations Manager.
Supervises traverse staff and completes end of season evaluations for personnel. Assigns tasking and outlines priorities daily. Identifies and communicates times for starting, stopping, breaks, meals, etc. Determines operational tempo based on environmental and scheduling factors.
Serves as safety coordinator. Implements USAP's environmental, health and safety programs and holds regular safety meetings. Responsible for creating and maintaining a safe workplace and ensuring that safety is the highest priority in the workplace and that all safety related rules and regulations are adhered to. Ensures that nothing is left in the field and that any releases to the environment are remediated properly and documented accordingly.
Communicates all safety incidents and near misses using the ASC reporting protocols.
Communicates professionally with their staff to relay information needed to be successful in their jobs. This includes, but is not limited to: staff meetings, performance appraisals, job requirements, structured trainings, SOP’s, and safety practices.
Ensures that all facilities and equipment are maintained and operated safely, that the camp is tidy, and that waste is stored properly throughout the season. Responsible for all hazardous cargo identification, labeling, and handling prior to disposal upon return to McMurdo Station.
Handles confidential matters in accordance with management policy. Ensures that all paperwork is filled out with integrity and that all department metrics are met.

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Parttime

Tank to Core Welder 1

Operates welding equipment to weld and attach tanks or other components to cores...

Location

United States , Mebane

Salary:

Not provided

AKG Termoteknik Sistemler

Expiration Date

Until further notice

Requirements

Completion of trade school OR apprenticeship OR internal on-the-job training
Basic welding knowledge preferred
Ability to work assigned shift

Job Responsibility

Operates welding equipment to weld and attach tanks or other components to cores following blueprint instructions under close supervision
Read and follow work instructions and basic blueprints
Move cores using manual effort or chain hoist
Match tanks to cores with guidance
Tack weld corners and assist in positioning tanks
Perform basic welding operations under supervision
Assist with additional parts installation if needed
Move finished cores to designated area
Meet entry-level production expectations
Maintain clean and safe workspace

What we offer

Competitive pay based on experience
Shift differential opportunities
GREAT medical, dental, and vision benefits the first of the month after 30 days
Company Paid Life insurance, STD insurance and LTD insurance
PTO and paid holidays
401(k) with amazing company match
Training and advancement opportunities
Stable manufacturing environment
Employee recognition programs
Team-oriented culture focused on safety and respect

Fulltime

Select Country

Welder in training

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?