Welder II Job at Dover Precision Components (Colonial Heights, South Chesterfield)

Aluminum Welder

SIGMADESIGN has collaborated with a local industrial company seeking experienced...

Location

United States , Vancouver

Salary:

25.56 - 34.13 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

Welder I: Minimum five to seven years’ welding/fabrication experience or apprentice program
Welder II: Minimum of two years’ welding/fabrication experience or apprentice program
Welder III: Minimum of one year welding/fabrication experience or apprentice program
Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards
Able to consistently pass UT/RT/PT weld joints
Compliance: Drug Screen, Background Check, must be US Citizen
Ability to lift, carry 60lbs., or maneuver objects
Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine
Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb
Capable of working from ladders and scaffolding

Job Responsibility

Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat
Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment
Assemble and tack parts as directed by supervisor
All other duties as assigned

What we offer

Multiple options for medical, dental and vision including some with HSA and FSA options
life and disability insurance
EAP
401K
PTO and 10 paid holidays
Career growth – Growing department. Lead positions potentially available in future for the right candidate

Fulltime

Welder

This employee welds components used to build Ditch Witch equipment. This employe...

Location

United States , Perry

Salary:

20.00 - 25.00 USD / Hour

The Toro Company

Expiration Date

Until further notice

Requirements

High School diploma or equivalent preferred
Appropriate reading, clerical, and basic math skills
Appropriate mechanical skills, including experience using hand and air-powered tools (wrenches, screwdrivers, hammers, etc.)
For Welder II: Typically, 18 to 36 months of directly related experience required
Certificate from technical school preferred
Appropriate MIG welding experience in all phases of welding (short arc, spray transfer, hard surfacing and submerged arc)
Experience in cutting processes, oxyacetylene torch and plasma torch
Must pass the written Production Welder II test over symbols with a minimum score of 70%
Must pass the hands-on macrotech test to determine the quality of the weld
Demonstrates the ability to weld production jobs to print, while following standard work with little to no supervision

Job Responsibility

Read information from blueprints, technical manuals or other documents
Set up fixtures, mount parts in fixtures, and perform mechanical assembly
Use a hoist to lift and position large, heavier components and completed weldments
Set up, adjust, and operate MIG welding equipment to weld machine components
Remove components from fixtures, clean and check them for quality, and correct errors or deficiencies of weldments
Use a computer to check the location, inventory, routing of parts, and to record inventory transactions
May run a Robotic Welding Machine
May assemble components and perform other duties as assigned

What we offer

Medical
Dental
Vision
401K Matching up to 4%
Life Insurance
Tuition Reimbursement
10 Paid Holidays
Paid Parental Leave

Fulltime

Aluminum Welder

SIGMADESIGN has collaborated with a local industrial company seeking experienced...

Location

United States , Vancouver

Salary:

25.56 - 34.13 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

Welder I: Minimum five to seven years’ welding/fabrication experience or apprentice program
Welder II: Minimum of two years’ welding/fabrication experience or apprentice program
Welder III: Minimum of one year welding/fabrication experience or apprentice program
Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards
Able to consistently pass UT/RT/PT weld joints
Compliance: Drug Screen, Background Check, must be US Citizen
Ability to lift, carry 60lbs., or maneuver objects, difficult objects will be lifted with the assistance of mechanical means or additional workers
Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine
Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb
Capable of working from ladders and scaffolding

Job Responsibility

Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat
Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment
Assemble and tack parts as directed by supervisor
All other duties as assigned

What we offer

Multiple options for medical, dental and vision including some with HSA and FSA options, life and disability insurance, EAP, 401K
PTO and 10 paid holidays
Career growth – Growing department. Lead positions potentially available in future for the right candidate

Fulltime

Aluminum Welder

SIGMADESIGN has collaborated with a local industrial company seeking experienced...

Location

United States , Vancouver

Salary:

25.56 - 34.13 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

Minimum five to seven years’ welding/fabrication experience or apprentice program (Welder I)
Minimum of two years’ welding/fabrication experience or apprentice program (Welder II)
Minimum of one year welding/fabrication experience or apprentice program (Welder III)
Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards
Able to consistently pass UT/RT/PT weld joints
Compliance: Drug Screen, Background Check, must be US Citizen
Ability to lift, carry 60lbs., or maneuver objects
Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine
Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb
Capable of working from ladders and scaffolding

Job Responsibility

Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat
Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment
Assemble and tack parts as directed by supervisor
All other duties as assigned

What we offer

Multiple options for medical, dental and vision including some with HSA and FSA options
life and disability insurance
EAP
401K
PTO and 10 paid holidays
Career growth – Growing department. Lead positions potentially available in future for the right candidate

Fulltime

Aluminum Welder

SIGMADESIGN has collaborated with a local industrial company seeking experienced...

Location

United States , Vancouver

Salary:

25.56 - 34.13 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

Minimum five to seven years’ welding/fabrication experience or apprentice program (Welder I)
Minimum of two years’ welding/fabrication experience or apprentice program (Welder II)
Minimum of one year welding/fabrication experience or apprentice program (Welder III)
Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards
Able to consistently pass UT/RT/PT weld joints
Compliance: Drug Screen, Background Check, must be US Citizen
Ability to lift, carry 60lbs., or maneuver objects
Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine
Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb
Capable of working from ladders and scaffolding

Job Responsibility

Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat
Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment
Assemble and tack parts as directed by supervisor
All other duties as assigned

What we offer

Multiple options for medical, dental and vision including some with HSA and FSA options
life and disability insurance
EAP
401K
PTO and 10 paid holidays
Career growth – Growing department. Lead positions potentially available in future for the right candidate

Fulltime

Aluminum Welder – Military Vessel

SIGMADESIGN has collaborated with a local industrial company seeking experienced...

Location

United States , Vancouver

Salary:

25.56 - 34.13 USD / Hour

Sigma Design

Expiration Date

Until further notice

Requirements

Minimum five to seven years’ welding/fabrication experience or apprentice program (Welder I)
Minimum of two years’ welding/fabrication experience or apprentice program (Welder II)
Minimum of one year welding/fabrication experience or apprentice program (Welder III)
Capable of passing a 3G, 4G Aluminum weld test on 3/8 plate to AWS D1.2 weld standards
Able to consistently pass UT/RT/PT weld joints
Compliance: Drug Screen, Background Check, must be US Citizen
Ability to lift, carry 60lbs., or maneuver objects
Must be able to lift 4 ft., 60 lb. spool of wire and load welding machine
Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb
Capable of working from ladders and scaffolding

Job Responsibility

Utilize knowledge of weld electrodes and wire, machine settings, maintain an acceptable standard in quality and quantity, and use oxygen/acetylene gas torch for cutting or pre-heat
Read and interpret drawings, sketches and weld symbols, set up and operate semi-automatic or automatic weld equipment
Assemble and tack parts as directed by supervisor
All other duties as assigned

What we offer

Multiple options for medical, dental and vision including some with HSA and FSA options
life and disability insurance
EAP
401K
PTO and 10 paid holidays
Career growth – Growing department. Lead positions potentially available in future for the right candidate

Fulltime

Welder II - MIG

Welder II - MIG position at Dover Food Retail (DFR), a manufacturer of Display C...

Location

United States , Conyers

Salary:

Not provided

Dover Precision Components

Expiration Date

Until further notice

Requirements

Two–year college or technical school
or one year related experience and/or training
or equivalent combination of education and experience
Ability to operate MIG welder
Basic fabrication skills
Understanding of 6S
Basic math skills
Understanding of measurements
Basic reading/writing skills
Understanding of weld specific tools

Job Responsibility

Joins together steel parts and may do some sheet metal assembly
Structural frame assembly
Interprets Blueprints and Structural Drawing Specifications to determine appropriate welding process
Ability to follow Engineered drawing specifications
Ability to Measure Squareness of a Frame Assembly
Interpret Structural Drawings
Utilize All Cutting Equipment to Cut Metal Products
Ability to accurately weld fabricated components and perform welds in all positions – flat, horizontal, vertical up and down
Use of grinder to de bur surfaces
Brazing Copper Drains in Pans

What we offer

401(k) savings plan with employer contributions
medical, dental and vision insurance
wellness programs
health savings account
health care and dependent care flexible spending accounts
company paid short-term disability and long-term disability
company paid employee basic life and AD&D insurance
supplemental employee and dependent life insurance
optional accident, hospital indemnity and critical illness insurance
adoption, surrogacy, and fertility benefits and assistance

Quality Control Supervisor

The Quality Control Supervisor is responsible for directing activities of N.D.T....

Location

United States , Blytheville

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

High School diploma or equivalent
Minimum 5 years’ experience in structural steel
At least two years’ quality control and supervisory experience
NDE (non-destructive examinations) qualified is preferred
Certified Welding Inspector & UT LVL II is preferred
Must be able to lift in excess of 100 pounds on occasion
Must have ability to bend, stoop, and climb frequently
The ability to work overtime and regular, punctual attendance is required
Requires some travel with over night stays

Job Responsibility

Directing activities of N.D.T. and Quality Control Inspectors
Performs constant surveillance of fabrication activities including fitting, welding, bolting, lay-down assembly, cleaning and painting
Maintains records of welder qualifications and checks records of inspections
Coordinates with shop supervision to assure timely performance of inspections
Works with maintenance department for calibrating welding machines
Calibrates tapes and paint gauges with inspectors and shop supervision
Prepares weld qualification tests and controls welding and testing thereof
Resolves in-process non-conformance corrections and obtains engineering approval for repairs
Notifies plant supervision and engineering of continuing or recurring problems
Responsible for adhering to all company safety and OSHA regulations

What we offer

Health Insurance
HSA with Employer contributions
Dental Insurance
Vision Insurance
Life Insurance
Disability Income Benefits
Paid Holidays
Paid Vacation
401 (k)

Fulltime

Welder II

Dover Precision Components

Location:
United States , Colonial Heights, South Chesterfield

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Welder II

Aluminum Welder

Welder

Aluminum Welder

Aluminum Welder

Aluminum Welder

Aluminum Welder – Military Vessel

Welder II - MIG

Quality Control Supervisor

Welder II

Dover Precision Components

Location:United States , Colonial Heights, South Chesterfield

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Welder II

Aluminum Welder

Welder

Aluminum Welder

Aluminum Welder

Aluminum Welder

Aluminum Welder – Military Vessel

Welder II - MIG

Quality Control Supervisor

Location:
United States , Colonial Heights, South Chesterfield

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 13, 2026