Virtual Commissioning Engineer Job at Percivon (Navi Mumbai)

Site Commissioning Engineer

We are seeking an experienced Project Commissioning Engineer – Integrated Contro...

Location

United Kingdom , St Neots

Salary:

Not provided

Dron & Dickson

Expiration Date

Until further notice

Requirements

HNC/HND or Degree in a relevant engineering discipline
Minimum 5 years’ experience in a similar ICSS commissioning role
Offshore working experience is essential
Strong understanding of ICSS industry standards and specifications
Extensive experience in ICSS design, configuration, testing and commissioning—preferably within the Energy sector
Proficiency in ABB engineering tools: 800xA, AC800M Engineering, AC400 Advant Master
Competency in IEC61131 programming languages
Experience with ABB hardware including cabinet build and loop design
Knowledge of industrial software tools (e.g., Modbus & IEC simulators)
Strong understanding of industrial communication protocols: IEC61850, Modbus RTU/TCP, Profibus, HART

Job Responsibility

Lead and perform commissioning activities for ICSS systems during on-site installation and start‑up
Ensure ABB‑delivered equipment is stored, handled, installed and documented
Coordinate technical queries with ABB project teams and product development
Conduct Internal Testing, FATs and Site Acceptance Tests
Maintain and update project documentation, ensuring correct revision control
Monitor compliance with relevant codes, QA/QC policies and industry standards
Troubleshoot and resolve complex technical issues efficiently
Provide regular progress reporting and maintain strong communication with project stakeholders

What we offer

33 Days Annual Leave
Bike to Work Scheme
Life Assurance
Critical Illness and Group Income Protection

Fulltime

New

Beauty & Wellbeing Id Assistant Project Manager – Packing Line

Location

Indonesia , Cikarang

Salary:

Not provided

Unilever

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical or Electrical Engineering
Working knowledge on project and engineering
Experience in handle complicated and high risk task
Have a good leadership and field oriented
Have business mindset, organizational, strategic and cultural awareness
High level of communication, technical skill and teamwork
Analytical and sharp with numbers and data
Fluent in business English, with Strong communications skills and ability to engage and influence others
Have strong analytical and problem-solving skills and a good eye for detail
Stakeholder management, able to build relationship with people across functions, cultures, geographies, and companies

Job Responsibility

Assist in planning, scheduling, and prioritizing project activities for packing line transformation and net productivity initiatives
Ensure all project and improvement activities are executed on time and comply with safety, quality, and engineering standards
Lead and deliver continuous improvement and VA-VE initiatives for sachet, pouch, bottle & tube in packing lines
Ensure end to end of all project administration from developing User Specification Requisition, Technical Bid Evaluation, Factory Acceptance Test, and Commissioning
Deliver and adopt new technology and best practice for packing line
Develop and drive packing line strategies to support low-cost manufacturing and operational efficiency
Evaluate Risk Assessments for all project and maintenance activities conducted by contractors or third parties, ensuring full compliance with safety and quality standards
Improve overall equipment effectiveness (OEE) by reducing downtime, eliminating minor stops, increasing line speed, and minimizing waste
Ensure availability and reliability of critical and consumable spare parts, while optimizing inventory levels
Collaborate closely with Production, Quality, Safety, SUIT, Planning, Maintenance, and R&D to align project execution with production requirements

Fulltime

Revit HVAC / Sheet Metal BIM Modeler/Detailer (VDC)

Location

United States , Oak Ridge

Salary:

Not provided

Apollo Mechanical Contractors

Expiration Date

Until further notice

Requirements

Strong working knowledge of HVAC sheet metal systems, ductwork layout, and mechanical equipment in commercial, industrial, or mission-critical facilities
Proficiency in Autodesk Revit and Fabrication MEP tools, Navisworks, and Bluebeam
Understanding of BIM coordination processes, including clash detection, model integration, and multi-trade collaboration
Ability to interpret construction documents, specifications, and engineering drawings and translate them into accurate BIM models
Familiarity with fabrication workflows, spool drawings, and installation sequencing is highly preferred
Strong attention to detail with the ability to work in a fast-paced, deadline-driven project environment
Minimum of 1-2 years of experience utilizing Revit in a BIM or detailing environment
Preferred 3–5+ years of practical field experience in HVAC sheet metal fabrication and installation
Demonstrated experience supporting fabrication-driven or construction-focused BIM workflows is highly desirable
Associate’s or Bachelor’s degree in Drafting, Engineering Technology, Construction Management, or a related field, or equivalent combination of education and hands-on industry experience

Job Responsibility

Utilize Autodesk Revit, Fabrication MEP, and related BIM software to develop detailed 3D models, shop drawings, and installation drawings for HVAC sheet metal systems
Produce coordinated fabrication-level drawings that support field installation, prefabrication, and constructability requirements
Collaborate with project teams, including engineering, field operations, and other trades, to ensure accurate coordination within a virtual construction (BIM) environment
Participate in clash detection, coordination meetings, and model reviews to resolve design and layout conflicts
Support model development from concept through construction, commissioning, and project closeout, ensuring alignment with project schedules and deliverables
Maintain and apply company BIM standards, templates, and workflows to ensure consistency, accuracy, and quality of all deliverables
Assist with project setup, model organization, and data management to support efficient BIM execution and downstream fabrication processes
Interface with fabrication shops and field teams to ensure model outputs align with fabrication methods, installation sequencing, and prefabrication strategies

What we offer

Medical, Dental, and Vision
401K with company Match
STD, LTD, Voluntary Life benefits
Paid Time off

Fulltime

Manufacturing Engineer - Final Assembly Operations

Support the cars side of the business in the technical management and maintenanc...

Location

United Kingdom , Hethel

Salary:

Not provided

Lotus UK Manufacturing

Expiration Date

Until further notice

Requirements

HNC/ HND/ Degree in Mechanical or Automotive Engineering
Previous manufacturing, production & engineering knowledge
Ability to demonstrate ongoing skills learning and achievement in area of Manufacturing
Used to working in a production environment
Self-motivated & driven to succeed
Positive 'can do' attitude, eye for detail, methodical and measured approach
Experience of DFMEA and PFMEA processes and related outcome documentation within the Manufacturing Control framework
Good understanding of problem solving, poke yoke and capability modelling

Job Responsibility

Creation of production processes, update assignments and align to manufacturing build requirements
Study operations sequence, material flow, fixturing / tooling, process documents / statements with the aim of improving line balancing, throughput and efficient working procedures
Draft and design layout of equipment, materials, and workspace to illustrate maximum efficiency
Creation / development and maintenance of Process Sheets from engineering released data
Production & Project support as required
Publish clear and concise information including all aspect of Man / Method / Machine (tooling) / Material to manufacturing
Co-ordinate with Training department to ensure suitable 'On the Job' training for new processes
Perform and support time studies for all Product / Process / Component changes to ensure manufacturing's ability to achieve to required Quality / Cost / Deliver elements
Perform periodic Process Audits to ensure products are being built to release Manufacturing Engineering information (Man / Method / Machine / Material)
Support investigation of Concern / Problem resolution

What we offer

25 Vacation Days + Bank Holidays
Performance Bonus
Future-Proof Pension
Private Healthcare

Fulltime

Control System Specialist (TS)

Role: CSU - Control System Specialist - Intermediate - Location: McArthur River ...

Location

Canada , Saskatoon

Salary:

65.00 - 100.00 USD / Hour

Morson Talent

Expiration Date

Until further notice

Requirements

Extensive PLC programming experience with Schneider PLCs and Control Expert (formerly Unity Pro)
Extensive DCS configuration and programming experience with Delta-V systems (Key Lake only)
Experience with Delta-V DCS Historian and integration with OSI PI via OPC-UA (Key Lake only)
Extensive DCS configuration and programming experience with EcoStruxure Foxboro DCS systems (Cigar Lake and McArthur River only)
Experience with EcoStruxure Foxboro DCS Historian and OSI PI integration through OPC drivers (Cigar Lake and McArthur River only)
Expert knowledge of industrial instrumentation and industrial communication protocols with emphasis on Modbus TCP/IP and HART
Extensive industrial networking experience including configuration of switches, firewalls, and related hardware
Strong understanding of industrial cybersecurity best practices
Experience with Windows Server administration including creation and maintenance of virtual machines in Hyper-V is considered an asset
Relevant technical diploma or degree in Electrical Engineering, Instrumentation Engineering, Automation Engineering, or a related discipline preferred

Job Responsibility

Ensure all work is completed safely while adhering to all safety and cybersecurity program requirements
Develop PLC and DCS programs based on engineering documentation including P&IDs and control narratives
Test, modify, and update PLC and DCS programs to verify functionality aligns with engineering drawings and specifications
Configure, test, and commission industrial networking devices including switches, firewalls, and interfaces between Industrial Control Systems (ICS) and Information Technology (IT) systems
Participate in verification of field device functionality alongside commissioning team members and troubleshoot PLC/DCS-related issues
Identify, document, and follow up on deficiencies to ensure satisfactory resolution and closure
Complete commissioning documentation including check sheets, ITPs, and test reports as defined by Cameco
Record accurate as-left conditions of PLC and DCS configurations and programming through redlines of engineering documentation and drawings
Participate in commissioning meetings including daily toolbox talks, safety meetings, and Job Hazard Analysis (JHA) activities
Support the development of detailed execution plans for commissioning activities

Fulltime

Engine Dynamometer & Test Engineer – Manufacturing Engineering

This is a dual-focus role combining manufacturing engineering ownership of engin...

Location

India , Chennai

Salary:

Not provided

Ford Motor Company

Expiration Date

Until further notice

Requirements

3–15 years of hands-on experience in engine dynamometer testing and test cell operations
Bachelor’s degree in Mechanical, Electrical, or Automotive Engineering
Strong understanding of ICE systems including air path, fuel, combustion, cooling, lubrication, and exhaust
Proven ability to independently troubleshoot test hardware, instrumentation, and automation software
Strong English communication skills (written and verbal) for cross‑functional collaboration
Ability to manage multiple priorities in a high‑pressure test environment

Job Responsibility

Manage engine dynamometers, instrumentation, and Data Acquisition (DAQ) systems
Troubleshoot and resolve Dyno hardware, instrumentation, and automation software issues
Ensure test cells are correctly configured for performance, emissions, durability, or calibration testing
Define material handling requirements for test facilities (rail systems, lift assists, fixtures)
Develop and maintain Bill of Process (BOP) standards for test methods and equipment specifications
Create and maintain Bill of Material (BOM) for test systems and standardise components globally
Use virtual manufacturing and virtual commissioning to simulate and validate test systems
Develop test process sequences and provide inputs to the Global Study Process Allocation System (GSPAS)
Define Scope of Work (SOW) and support procurement of engine test systems aligned with Powertrain strategy
Provide manufacturing feasibility assessments and cost estimates to programme management

Fulltime

Charging Automation Lead

Waymo is an autonomous driving technology company with the mission to be the wor...

Location

United States , Mountain View; San Francisco

Salary:

152000.00 - 187000.00 USD / Year

Waymo

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Computer Science, Computer Engineering, Business, or a related technical field
5+ years of relevant experience with automation/scripting, specifically with high proficiency in Python and experience with frameworks like Autobot or similar
Extensive technical experience with electrification features, EV charging infrastructure deployment, and the commissioning lifecycle
Strong understanding of CI/CD pipelines and tools such as GitHub, Jenkins, or Azure DevOps, along with version control systems like Git
Proven ability to lead cross-functional teams and manage complex projects that involve both hardware-in-the-loop (HIL) bench work and in-vehicle testing
Demonstrated ability to communicate technical issues, project status, and strategic recommendations to leadership and external partners

Job Responsibility

Lead the smart buildings design and implementation of automated test scripts and standardized workflows for EV charging features, from initial development through utility energization and final customer activation
Act as the primary technical lead ensuring seamless integration between vehicle mechatronic embedded controls, charging hardware, and cloud-based mobile applications
Define and enforce rigorous quality standards and testing strategies, integrating automated test suites into CI/CD pipelines to ensure continuous delivery of high-quality charging infrastructure
Identify process inefficiencies and lead implementation of automation virtualization opportunities to reduce manual testing and streamline commissioning activities
Collaborate with product managers, developers, and feature owners while managing external commissioning vendors to ensure all site technical requirements are met
Adhere to and enforce all safety precautions, particularly regarding high-voltage systems and on-vehicle testing, treating safety as the top priority
Guide others in best practices, frameworks, and troubleshooting methodologies for complex electrification systems

What we offer

Discretionary annual bonus program
Equity incentive plan
Health and wellness benefits (medical, dental, vision insurance, mental wellness support, gym membership, special wellness programs)
Financial wellness benefits (competitive compensation, bonus opportunities, equity, employee discounts)
Flexibility and time off (flexibility to work from another location for four weeks per year
hybrid work model
paid time off
bereavement, sick, and parental leave)

Fulltime

Senior Manufacturing Systems Engineer: Automation

HOW MIGHT YOU DEFY IMAGINATION? If you feel like you're part of something bigger...

Location

United States , Holly Springs

Salary:

Not provided

Amgen

Expiration Date

Until further notice

Requirements

Basic Qualifications: High School Diploma / GED and 10 years of Engineering experience OR Associate's Degree and 8 years of Engineering experience OR Bachelor's Degree and 4 years of Engineering experience OR Master's Degree and 2 years of Engineering experience OR Doctorate Degree
Preferred Qualifications: Degree in Electrical Engineering, Computer Science, Chemical Engineering, Biotech Engineering, or related field
Direct knowledge of Automation System design, experience in process control engineering and troubleshooting with GMP biopharmaceutical production facility equipment/systems automation such as media, harvest, bioreactors, solution prep, single use mixing vessels, chromatography, TFFL/TFFX, viral filtration, viral inactivation, UF/DF, depth filtration, drug substance fill, CIP/SIP, clean utilities, and integrating various OEM automation software
Extensive understanding and background in programming, design, installation and lifecycle management of manufacturing process controls, automation and field instrumentation technologies
Experience with Emerson DeltaV DCS system, Process Control Network design including network segregation, virtual infrastructure design and implementation, and ability to perform advanced troubleshooting activities, system integration using OPC, Foundation Fieldbus, Profibus, and DeviceNet technologies. Experience with DeltaV Live is preferred
Ability to interpret and apply GAMPs and GMPs and familiarity with documentation in a highly regulated environment with requirements such as 21 CFR Part 11, ASTM 2500, S88, and S95
Experience in Capital Project Lifecycle Management: Conceptual Design, Scope and cost estimate development, business case development, detailed design, engineering and validation documentation and project execution
Demonstrated hands-on experience in developing process control strategies for New Product Introduction and New Technology Deployment for Drug Substance Plant Operations
Demonstrated experience with continuous improvements resulting in enhanced safety, system reliability, and productivity (e.g. cycle times, and reduced plant utilities usage etc.) related to Drug Substance Plant Operations
The ideal individual must be a self-directed team player ready to mentor and develop engineering staff and embrace a team-based culture that relies on collaboration for effective decision-making

Job Responsibility

Develop and maintain the process control system on Emerson DeltaV distributed control system (DCS)
Work with process subject matter experts (SMEs) to understand key process requirements and transform them into digital automated solutions
Collaborate with business partners to understand how automation can improve workflow and productivity
Synthesize requirements from clients, customers or end-users to develop the best automation solutions
Provide clear documentation for delivered solutions and processes
work closely with QA partners while supporting computerized systems validation processes in a GxP environment
Maintain Data Integrity Assessments with the current Amgen and Industry standards
Build the business processes to support the project scope in alignment with project timelines
Develop detailed specification and engineering policies and procedures that affect multiple organizational units
Support commissioning and qualification efforts including Automation Installation Verification/Automation Check Out (IV/ACO) in a fast-paced environment

What we offer

Comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts
A discretionary annual bonus program, or for field sales representatives, a sales-based incentive plan
Stock-based long-term incentives
Award-winning time-off plans and bi-annual company-wide shutdowns
Flexible work models, including remote work arrangements, where possible

Fulltime

Select Country

Virtual Commissioning Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?