CrawlJobs Logo

Underground Geologist

Australia, Glenden · Job Posted February 16, 2026
Apply Position
Job Link Share

Job Description

Normally the incumbent operates at a mature professional level with the capacity to make technical contributions to projects. Through the application of rock mechanics principles to mine design, the incumbent is responsible for optimising open pit, underground, waste dump, and mine infrastructure development.

Job Responsibility

  • Visibly support and champion Peabody’s Missions and Values
  • Act in accordance with and adhere to Safety as a Way of Life Management System
  • Develop and implement standards and procedures in respect to slope/ground monitoring/ control and mine infrastructure
  • Develop and implement monitoring regimes in respect to dumping, surface run-off and groundwater flows, and slope/ground monitoring
  • Conduct geotechnical inspections of pits and underground, dumps and stockpiles and tailings dams
  • Develop and monitor safe work practices for work on or around slopes and underground
  • Advise and assist engineers with recommendations on geotechnical issues regarding mine design/planning and operations as requested
  • Supervise geotechnical engineers and other technical staff in their day to day activities
  • Ensure activities comply with safety, environmental and statutory requirements
  • Other duties as assigned by the company

Requirements

  • 2 years of relevant professional experience and/or training or equivalent combination of education and experience required
  • Must have the ability to stand for up to 4 hours per shift
  • Must have the ability to be seated for up to 4 hours to operate equipment or vehicles
  • Must have the ability to work from elevated positions, walk/climb up and down stairs/steps and climb on/off equipment and ladders
  • Must have the ability to wear required protective footwear, hearing and eye protection, and other personal protective equipment as required by Company and MSHA
  • Must have the ability to perform repetitive hand and wrist motions (push, pull, twist, handle), and have rapid reflex movements of the arms/legs and good hand to eye coordination
  • Must have the ability to lift/raise 10 – 50 lbs. without mechanical assistance frequently during the work shift
  • Must have the ability to work in extreme conditions, including but not limited to changing weather conditions, dust, mud, varying levels of noise from low to high decibels, varying degrees of light/dark, in and around artificial light, and in a confined work area
  • Must have the ability to work various shifts (required shifts include days, evening and nights, with rotating schedules, weekends and holidays)
  • Must have the ability to stand for prolonged periods of time on uneven, rocky surfaces for up to the entire length of the shift
  • Must have the ability to walk for up to 4 hours at a time. Will be required to walk through different sections of the mine with varying degrees of clearance and headroom
  • Must have the ability to bend or stoop for a full work period as a result of mine height
  • Must have the ability to lift 25 – 50 lbs. on a frequent basis and the ability to occasionally lift items weighing up to 80 lbs.
  • Must have the ability to sit for up to 8 hours
  • Must be able to use a computer and communicate effectively in various forms, including email and by phone
  • Must have the ability to review paper and electronic documents and complete computer entry of data from paper documents
  • Must be able to find, remove and return files to/from file cabinets and discuss issues by telephone and in person
  • Must be able to operate copier, fax machine, etc.

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Underground Geologist

8 matching positions

Miner 1 – Development Miner

Join Our Talent Community Miner 1 – Development Miner Full-time Permanent Hanson...
Location
Location
Canada , Hanson Lake
Salary
Salary:
63.43 - 81.78 CAD / Hour
foranmining.com Logo
Foran Mining Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Grade 12 diploma or GED or a combination of education with a minimum of 8 years underground work experience
  • 5+ years of experience as a Development Miner in a hard rock setting
  • Proven skills in excavation, tunneling, drilling, and blasting
  • Experience installing ground support systems (rock bolts, mesh, shotcrete)
  • Team player with a strong commitment to safety and promoting a safety-first culture
  • Familiarity with operating mining equipment, such as jumbo drills, mechanized bolters, LHD machines, scissor trucks and haul trucks
  • Ability to obtain a Blasting certification or license, in accordance with local and national regulations
  • Preference will be given to those either located near our McIlvenna Bay site and those in the province of Saskatchewan
Job Responsibility
Job Responsibility
  • Excavate and construct access tunnels, drifts, and ramps using appropriate mining equipment and techniques
  • Install ground support systems (rock bolts, mesh, shotcrete) to stabilize tunnel walls and ceilings
  • Conduct drilling and blasting operations using controlled explosives to access ore bodies
  • Set up and maintain ventilation systems to ensure airflow and remove harmful gases
  • Follow all safety protocols to ensure a secure environment for current and future operations
  • Collaborate with geologists and engineers to align development work with geological data and plans
  • Inspect, maintain, and operate development equipment to ensure safe and efficient performance
  • Coordinate with mine site personnel to ensure smooth execution of development activities
  • Adhere to engineering plans and regulatory requirements for responsible mine development
  • Maintain accurate records of progress, ground support, drilling, and blasting activities
What we offer
What we offer
  • Competitive Hourly Rate: $63.43-$81.78/hr which includes a target-based monthly bonus
  • 100% Employer paid Health, Dental, Vision, Life and Long-term disability Insurance
  • RSP with company match
  • Camp-based position with travel support
  • Fulltime
Read More
Arrow Right

Miner 2 – Production Driller

As a key member of the Underground Production Team, the Miner 2 is responsible f...
Location
Location
Canada , Hanson Lake
Salary
Salary:
52.11 - 75.90 CAD / Hour
foranmining.com Logo
Foran Mining Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Grade 12 diploma or GED
  • Minimum of 4 years experience in an Underground Mine Environment
  • Ability to obtain a Blasting certification or license, in accordance with local and national regulations
  • Proficiency in operating various types of drilling machinery, including top hammer and/or ITH drills
  • A strong understanding of drilling principles, techniques, and equipment mechanics
  • Familiarity with geological principles to align drilling operations with geological data
  • Knowledge of drilling equipment maintenance and troubleshooting
  • Knowledge of safety regulations and best practices in underground mining
  • Physical fitness and the ability to work in confined spaces and challenging underground conditions
Job Responsibility
Job Responsibility
  • Follow prescribed drill patterns and depths to support efficient mineral extraction
  • Collaborate with mining engineers, surveyors, and geologists to align drilling activities with geological and production requirements
  • Regularly inspect, maintain, and troubleshoot drilling equipment to ensure safe and reliable operation
  • Adhere to all safety protocols, regulations, and environmentally responsible work practices
  • Maintain clear and effective communication with engineers, geologists, and team members to coordinate activities and minimize downtime
  • Work toward achieving production targets by optimizing drilling efficiency
  • Identify and address technical issues encountered during drilling operations
  • Maintain accurate records of drilling activities, including depths, performance, and deviations
  • Operate other equipment as required to support drilling activities
  • Participate in first aid and emergency response requirements as applicable
What we offer
What we offer
  • Competitive Hourly Rate including monthly bonus based on targets
  • Employer paid health, dental, and vision insurance
  • Life and disability insurance
  • RSP with company match
  • Camp-based position with travel support
  • Fulltime
Read More
Arrow Right

Lead Engineering Geologist

The Lead engineering Geologist will be part of the current DJV (Design Joint Ven...
Location
Location
Australia , Sydney; Cooma
Salary
Salary:
Not provided
lombardi.group Logo
Lombardi Engineering
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Should have at least 10-15 years of industry experience in ground investigation, D&B/TBM tunnel excavation and support, caverns, shafts, adits and surface excavation and support
  • Should have a degree in Engineering Geology or equivalent, and have preferably professional registration status
  • Preferably be familiar with tunneling observational methods i.e NATM as well as TBM tunneling with respect to geological/geotechnical assessment during excavation and instrumentation and monitoring systems and data interpretation
  • Familiar with advanced tunnel/underground geological software and system, i.e. Leapfrog, gINT, Shape Matrix, Dips, Swedge/Unwedge, etc.
  • A valid driving license
Job Responsibility
Job Responsibility
  • Lead Lombardi geology team on site
  • Perform scheduling, resource planning and managing the REDST tasks related to geology studies and investigations
  • Liaise with the client (employer) safety officers, tunnel inspectors, security guards, section engineers, and surveyors to ensure the safety of DJV staff/DJV geologists during the geology field works and geological mapping
  • Attend regular internal/external meetings as requested by the Lead Resident Design Engineer or Project Manager and Project Director
  • Attend regular technical meetings with the contractor/Employer as requested by the Lead Resident Design Engineer
  • Oversee and conduct tunnels/shafts/cavern/access adits and portals geological mapping
  • Assess ground conditions and ground behaviors in response to the surface and underground excavations in accordance with the relevant technical specifications and drawings
  • Review geological mapping, geological/geotechnical instrumentation and monitoring documents, geotechnical testing results and other relevant documents as specified in the relevant specifications and drawings
  • Advise on tunnel/cut slope excavation and support methods, rock/soil support, fissure/consolidation/backfill/cavity grouting, probe drilling, over breaks treatment, geotechnical instrumentation and monitoring and lab/in-situ testing in accordance with the project technical specifications and drawings
  • Geological/geotechnical investigation and data interpretation in relation to D&B and TBM excavations, shafts, caverns, cut slopes, and tunnel portals
  • Fulltime
Read More
Arrow Right

Lead Engineering Geologist

The Lead engineering Geologist will be part of the current DJV (Design Joint Ven...
Location
Location
Australia , Sydney; Cooma
Salary
Salary:
Not provided
lombardi.group Logo
Lombardi Engineering
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Should have at least 10-15 years of industry experience in ground investigation, D&B/TBM tunnel excavation and support, caverns, shafts, adits and surface excavation and support
  • Should have a degree in Engineering Geology or equivalent, and have preferably professional registration status
  • Preferably be familiar with tunneling observational methods i.e NATM as well as TBM tunneling with respect to geological/geotechnical assessment during excavation and instrumentation and monitoring systems and data interpretation
  • Familiar with advanced tunnel/underground geological software and system, i.e. Leapfrog, gINT, Shape Matrix, Dips, Swedge/Unwedge, etc.
  • A valid driving license
Job Responsibility
Job Responsibility
  • Lead Lombardi geology team on site
  • Perform scheduling, resource planning and managing the REDST tasks related to geology studies and investigations
  • Liaise with the client (employer) safety officers, tunnel inspectors, security guards, section engineers, and surveyors to ensure the safety of DJV staff/DJV geologists during the geology field works and geological mapping
  • Attend regular internal/external meetings as requested by the Lead Resident Design Engineer or Project Manager and Project Director
  • Attend regular technical meetings with the contractor/Employer as requested by the Lead Resident Design Engineer
  • Oversee and conduct tunnels/shafts/cavern/access adits and portals geological mapping
  • Assess ground conditions and ground behaviors in response to the surface and underground excavations in accordance with the relevant technical specifications and drawings
  • Review geological mapping, geological/geotechnical instrumentation and monitoring documents, geotechnical testing results and other relevant documents as specified in the relevant specifications and drawings
  • Advise on tunnel/cut slope excavation and support methods, rock/soil support, fissure/consolidation/backfill/cavity grouting, probe drilling, over breaks treatment, geotechnical instrumentation and monitoring and lab/in-situ testing in accordance with the project technical specifications and drawings
  • Geological/geotechnical investigation and data interpretation in relation to D&B and TBM excavations, shafts, caverns, cut slopes, and tunnel portals
  • Fulltime
Read More
Arrow Right

Associate Geologist

We are seeking an Associate Geologist to assist the Mining Compliance team with ...
Location
Location
United States , Raleigh
Salary
Salary:
Not provided
martinmarietta.com Logo
Martin Marietta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in mining, geology, engineering, or related curriculum with a strong focus on mining or construction materials
  • 0-2 years of experience in geological and/or mine engineering technical roles, preferably for aggregate or industrial mineral mining operations
  • Experience developing mine plans for surface and underground operations
  • Experience with exploration drilling and geologic interpretation
  • Possess a Professional Engineering (PE) or Professional Geologist (PG) license, or passed the Fundamentals of Engineering (FE) or Fundamentals of Geology (FG) exam
  • Experience with public reporting of mineral reserves under S-K 1300 or similar international standards
  • Proficient in mine planning software programs such as Carlson, Maptek, or similar
  • Excellent verbal, written, and communication skills to include public speaking
  • strong time management skills
  • ability to prioritize and manage multiple tasks
Job Responsibility
Job Responsibility
  • Champion Martin Marietta’s safety culture, ensuring that mining best practices and processes comply with company safety requirements and industry best practices
  • Maintain and improve technical processes, standards, and best practices for the mine planning technical services group
  • Maintain and improve comprehensive peer review standards for technical work
  • Complete site resource and reserve evaluations and ensure compliance with S-K 1300 requirements
  • Assess geological data and quality to develop geologic modeling and support mine planning and estimation of reserves
  • Prepare models, maps, plans, and geologic cross-sections
  • Manage geologic databases
  • Provide geologic analysis and consultation to company mining, engineering, and management personnel
  • Assist with problem solving related to drilling and exploration operations
  • Analyze geologic logging, quality sampling, and field data collection
What we offer
What we offer
  • Medical
  • Prescription Drug
  • Dental
  • Vision
  • Health Care Reimbursement Account
  • Dependent Care Reimbursement Account
  • Wellness Programs
  • Employee Assistance Plan
  • Paid Holidays and Vacation
  • 401(k) with Company matching
  • Fulltime
Read More
Arrow Right
New

Ob medical assistant

As our Medical Assistant, you'll keep the day running smoothly and efficiently f...
Location
Location
United States , Omaha
Salary
Salary:
18.06 - 25.51 USD / Hour
americannursingcare.com Logo
American Nursing Care
Expiration Date
September 20, 2026
Flip Icon
Requirements
Requirements
  • Graduate of a medical assisting program accredited by the Accrediting Bureau of Health Education Schools (ABHES) or Commission on Accreditation of Allied Health Education (CAAHEP)
  • Successfully completed Medication Aide 40-hour course or current/valid
  • Basic Life Support (BLS) from the American Heart Association
Job Responsibility
Job Responsibility
  • Performs general patient care following established clinic workflows
  • Greets and prepares patients for the health care provider by obtaining and recording vital signs, reviewing drug allergies and current medications, completing applicable screening questionnaires and documenting reason for visit
  • Collects and prepares ordered specimens for laboratory analysis
  • Prepares and provides ordered medications and/or vaccines to patients
  • Cleans and sterilizes instruments
  • Ensures patient exam rooms are stocked, clean, and orderly
What we offer
What we offer
  • Sign On Bonus
  • medical
  • prescription drug
  • dental
  • vision plans
  • life insurance
  • paid time off
  • tuition reimbursement
  • retirement plan benefit(s) including, but not limited to, 401(k), 403(b), and other defined benefits offerings
  • Fulltime
Read More
Arrow Right
New

Personal Banker

Location
Location
United States , Humble
Salary
Salary:
Not provided
https://www.wellsfargo.com/ Logo
Wells Fargo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 6+ months of interacting with customers experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education
Job Responsibility
Job Responsibility
  • Build lasting customer relationships through proactive, meaningful conversations that support financial well-being and deepen engagement
  • Lead discovery-driven conversations to understand customer needs and connect them with relevant banking products, services, and solutions
  • Drive branch growth by identifying opportunities, promoting solutions, and making appropriate referrals to meet customer and business goals
  • Support everyday banking needs, including new account openings, service requests, and credit applications
  • Perform cash handling and teller line activities, accurately processing transactions while maintaining compliance and operational standards
  • Demonstrate comfort using and adopting digital tools and technologies to enhance the customer experience and support evolving banking needs
  • Deliver accurate, compliant service while exercising sound judgement within defined risk controls
  • Collaborate with branch teammates to coordinate seamless handoffs to licensed bankers or other specialists, ensuring customers are connected to the right expertise
  • Fulltime
Read More
Arrow Right
New

Civil Engineer

The town of Plymouth seeks qualified applicants for the position of CIVIL ENGINE...
Location
Location
United States , Plymouth
Salary
Salary:
98798.96 - 122995.60 USD / Year
mma.org Logo
Massachusetts Municipal Association
Expiration Date
July 18, 2026
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in civil engineering or a related field
  • five years of design and/or field construction experience in public works projects, preferably in the municipal field
  • or an equivalent combination of the required education and experience
  • Certification as an Engineer-in-Training is required
  • Massachusetts Class D driver’s license is required
  • Proficiency in Auto CAD Civil 3D and Hydro-CAD is required
Job Responsibility
Job Responsibility
  • Design capital improvement projects, stormwater drainage systems, roadways, estimating bid preparation, construction inspection, review of projects for compliance with Town standards, and other related work as required
  • Performs engineering, drafting, and surveying functions, requiring the exercise of some independent judgment in setting priorities, in allocating division resources and assigning subordinates to projects, and in choosing between several alternative approaches, or in the use of proper technical methods for specific engineering issues or problems
  • Fulltime
Read More
Arrow Right