Tool Adjuster - Engine Factory Job at Randstad (Eindhoven)

Heat-Ventilation AC Mechanic

The Heating, Ventilation, and Air-Conditioning Mechanic installs, services and r...

Location

United States , Texarkana

Salary:

22.80 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or equivalent and a minimum of 3 years of experience
EPA Freon Recovery license required
Must have a valid driver's license
Must be able to obtain and maintain facility credentials/authorization, Note: US Citizenship is required for facility credentials/authorization at this work location
Must have specific training and thorough knowledge in the particular area of facility maintenance
Must have a broad knowledge of other disciplines such as general math, etc.
Ability to read and understand blueprints, work orders, inspection reports and specifications is required
Knowledge of principals and theories of air conditioning and refrigeration, dehumidification and air conditioning systems
Must have the ability to weld, braze and solder
Ability to calculate air flow and pressure temperature characteristics for various systems is required

Job Responsibility

Installs, services and repairs environmental-control systems in residences, department stores, office buildings, and other commercial establishments
Mounts compressor and condenser units on platform or floor, using hand tools, following blueprints or engineering specifications
Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment
Installs evaporator unit in chassis or in air-duct system, using hand tools
Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools
Cuts and threads pipe, using machine-threading or hand-threading equipment
Joins tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, using torch, forming complete circuit for refrigerant
Installs expansion discharge valves in circuit
Connects motors, compressors, temperature controls, humidity controls, and circulating ventilation fans to control panels and connects control panels to power source
Installs air and water filters in completed installation

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

New

Maintenance Mechanic I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Cleveland

Salary:

46400.00 - 58000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Associate's degree in a technical field preferred
High School Diploma/GED with at least 2 years of mechanical systems repair, industrial maintenance, or equivalent technical experience required
Ability to individually lift and carry up to 50 pounds
Capability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck and waist, and balance
Standard visual acuity, including the capacity to differentiate colors
Ability to work most holidays, some weekends, and plant shutdown periods

Job Responsibility

Support plant production by performing repairs and preventive maintenance on manufacturing equipment
Troubleshoot equipment containing electrical, electronic, mechanical, pneumatic, hydraulic, and vacuum systems
Rebuild and modify production machines and components to support technology improvements and control parts cost
Support the installation of manufacturing equipment
Use hand tools, power tools, and electrical test instruments relating to control circuits
Directly support PMT, TPM, Lean Maintenance, and Lean Energy activities through team membership, innovative thinking, and completion of assigned projects
Act as a resource for manufacturing operator skill training and help develop area MIT abilities
Apply precision maintenance workmanship in all preventive, corrective, and project activities
Analyze machine failures for root cause and recommend corrective actions
Assist in annual equipment inspections

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP)
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

New

Maintenance Technician - 1st Shift

This position is responsible for maintaining plant’s food manufacturing equipmen...

Location

United States , Toluca

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
1-3 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills
Must have working knowledge of testing equipment and devices including the use of Multi-meter, Thermal imaging camera, and basic hand and power tools
Experience and ability to work in a fast-paced manufacturing environment
Basic computer skills is required (Microsoft windows, MS Office Suite and outlook email)
Welding and fabrication experience is a plus

Job Responsibility

Maintains, troubleshoots and repairs various production equipment systems and devices and performs regular preventive maintenance as planned
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime and identify opportunities for improvement
Collaborate within the immediate supervisor and maintenance planner to schedule and develop inspection routines and preventative maintenance schedules
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Assist Team Leaders and line Operators in efficient line start up and equipment adjustments
Assist other maintenance department staff with technical troubleshooting
Keeps supervisor and/or manager up to date on all on-going work assignments, provides consistent updates in regards to project status, completion time projections, and any problems that may have arisen during the course of the project
Performs high quality work that meets industry accepted maintenance practices to maintain compliance with external regulatory agencies
Continues to develop maintenance technical skills within mechanical, electrical, controls, hydraulic, pneumatic, welding and fabrication skillset
Increases equipment specific knowledge for maintenance activities on factory equipment such as cook kettles, pumps, mixers, food formers, ovens, fillers, food assembly equipment, fryers, primary packaging equipment such as wrappers, secondary packaging equipment such as formers and closers, metal detectors and palletizing equipment

Fulltime

New

Maintenance Technician - 3rd Shift

This position is responsible for maintaining plant's food manufacturing equipmen...

Location

United States , Toluca

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
1-3 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills
Must have working knowledge of testing equipment and devices including the use of Multi-meter, Thermal imaging camera, and basic hand and power tools
Experience and ability to work in a fast-paced manufacturing environment
Basic computer skills is required (Microsoft windows, MS Office Suite and outlook email)
Welding and fabrication experience is a plus

Job Responsibility

Maintains, troubleshoots and repairs various production equipment systems and devices and performs regular preventive maintenance as planned
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime and identify opportunities for improvement
Collaborate within the immediate supervisor and maintenance planner to schedule and develop inspection routines and preventative maintenance schedules
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Assist Team Leaders and line Operators in efficient line start up and equipment adjustments
Assist other maintenance department staff with technical troubleshooting
Keeps supervisor and/or manager up to date on all on-going work assignments, provides consistent updates in regards to project status, completion time projections, and any problems that may have arisen during the course of the project
Performs high quality work that meets industry accepted maintenance practices to maintain compliance with external regulatory agencies
Continues to develop maintenance technical skills within mechanical, electrical, controls, hydraulic, pneumatic, welding and fabrication skillset
Increases equipment specific knowledge for maintenance activities on factory equipment such as cook kettles, pumps, mixers, food formers, ovens, fillers, food assembly equipment, fryers, primary packaging equipment such as wrappers, secondary packaging equipment such as formers and closers, metal detectors and palletizing equipment

Fulltime

Maintenance Mechanic Lead - 3rd Shift

JOB DESCRIPTION Position Summary This position is responsible for leading and ...

Location

United States , Oakland

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

Associate Degree or other technical degree in Electrical Engineering, Mechanical Engineering or Technology or the equivalent combination of education and experience
3-5 years of proven work experience on electrical/electronic systems, mechanical systems, hydraulic and pneumatic systems is required with the ability to demonstrate high proficiency in these areas
Effectiveness in prioritizing assigned duties and evaluating the work of personnel
Outstanding skills for offering training and leadership to staff for them to be able to successfully carry out diverse duties associated with the building trades
Ability to interpret, illustrate, and apply regulation codes and rules
Outstanding ability to interpret sketches, blueprints, and work orders to other personnel
Functional knowledge of standard manufacturing practices including, but not limited to: general safety, lock-out tag-out, forklift safety, ARC Flash and electrostatic discharge awareness
Electrical skills in troubleshooting and repairing 480/230 v 3ph.120 v and 24v systems with the ability to read and understand schematics, blue prints and PLC ladder logic
Must be able to work well with all levels of personnel whether individually or in a team environment, and especially must be able to interface and communicate with line operators in order to assist with repairs and troubleshooting
Must possess a high level of written and verbal communication skills, critical thinking and problem solving skills

Job Responsibility

Instructs and offers guidance and directives to a team of maintenance technicians while being involved in one or more of the skilled activities
Gives support to supervisor and/or manager in regards to accomplishing tasks while referring uncommon technical issues to the supervisor
Offers inputs into maintenance technician performance evaluations since the lead role oversees the duties of assigned maintenance technicians
Designates and monitors the work of maintenance personnel in order to complete scheduled/planned work activities while keeping mechanical downtime to a minimum level to achieve department’s commitments and targets
Guarantees adherence to safety practices and principles, and to the relevant Federal, State, and Local codes and promotes a safe work environment
Ensures the maintenance of equipment, tools and other belongings in a clean, secure, and appropriate working condition and for the maintenance shop to be neat and clean
Maintains, troubleshoots and repairs various production equipment systems and devices and performs building and grounds maintenance and facility repairs as needed to include carpentry, plumbing, and painting
Performs regular equipment checks and completes the required predictive checklists to identify early signs of potential equipment failures and minimize unplanned downtime, and identify opportunities for improvement
Performs new installations and relocations of new/existing equipment, regular and emergency startups and shutdowns of equipment in accordance with company standard operating procedures and safety requirements
Performs high quality work that meets Industry accepted maintenance practices to maintain compliance with external regulatory agencies

Fulltime

New

Maintenance Mechanic I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Cleveland

Salary:

46400.00 - 58000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED with at least 2 years of mechanical systems repair, industrial maintenance, or equivalent technical experience required
Associate’s degree in a technical field preferred
Ability to individually lift and carry up to 50 pounds
Capability to bend/stoop, squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck and waist, and balance
Standard visual acuity, including the capacity to differentiate colors
Applicants must be authorized to work for any employer in the U.S.

Job Responsibility

Support plant production by performing repairs and preventive maintenance on manufacturing equipment
Troubleshoot equipment containing electrical, electronic, mechanical, pneumatic, hydraulic, and vacuum systems
Rebuild and modify production machines and components to support technology improvements and control parts cost
Support the installation of manufacturing equipment
Use hand tools, power tools, and electrical test instruments relating to control circuits
Directly support PMT, TPM, Lean Maintenance, and Lean Energy activities through team membership, innovative thinking, and completion of assigned projects
Act as a resource for manufacturing operator skill training and help develop area MIT abilities
Apply precision maintenance workmanship in all preventive, corrective, and project activities
Analyze machine failures for root cause and recommend corrective actions
Assist in annual equipment inspections

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Supply Planner, Reality Labs

Reality Labs (RL) at Meta develops and builds cutting-edge Virtual and Augmented...

Location

United States , Sunnyvale

Salary:

121000.00 - 177000.00 USD / Year

Supply Chain Manager – Server Product Planning

Supply Chain Manager who owns and maintains production supply modeling for Serve...

Location

United States , Austin

Salary:

105040.00 - 157560.00 USD / Year

AMD

Expiration Date

Until further notice

Requirements

BS or MS in Supply Chain, Industrial Engineering / Operations or Business is preferred
APICS certification is a plus

Job Responsibility

Own and maintain product supply plans and coordinates execution
Project/forecast supplies across suppliers with cross collaboration internally and externally
Collaborate with the Business Unit to adapt and match customer demand within modeled weekly capacity as demand mix changes
Identify required demand mix for factory planner/s to execute
Integrated Product Planning: Collaborate with cross-functional teams to plan and execute the target revenue attainment
Collaborate on risk management strategies to address potential disruptions and ensure production continuity
Tactical Product Planning: Influence supply commits weekly
Partner with Customer Operations and/or Global Logistics to address customer escalations and supply commit adjustments
Drive robust tool development to manage complex planning, BOM, and inventory flows
Advocate and drive continuous improvement & change management process design to increase team’s productivity and scale.

What we offer

Benefits offered are described: AMD benefits at a glance.

Fulltime

Select Country

Tool Adjuster - Engine Factory

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?