Test technician Jobs

Component Test Technician

The Component Test Engineering team is looking for a technician with experience ...

Location

United States , Garden Grove

Salary:

30.00 - 35.00 USD / Hour

Harbinger Motors

Expiration Date

Until further notice

Requirements

High-voltage electrical testing experience
Operating bi-directional power supplies and electrical loads
Building special wiring harnesses from scratch
including soldering, crimping, etc.
Building test-stands and test-fixtures

Job Responsibility

Assist the engineering staff with test setups, execution, and teardown
Occasionally travel to external test facilities to set up and/or execute tests
Fabricate test fixtures, make wiring harnesses and support other lab activities
Operate a forklift (training will be provided, if needed)
Maintaining lab inventory for consumables
Maintaining a clean lab environment

Fulltime

Electronics Test Technician

Intellisense Systems, Inc. is a privately held company with a proven track recor...

Location

United States , Torrance

Salary:

25.50 - 31.90 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Associate degree in general technical area is a plus
2-3 years’ experience in an engineering or manufacturing environment
Experience with operation of automated test fixtures, printed circuit board assembly and testing, cable harness production, ESD control, and handling optical components are a plus
Excellent verbal and written communication skills
Excellent technical report writing skills
Basic electrical circuit and mechanical design knowledge sufficient for understanding of test fixtures including basic wiring and computer interfacing
Must be able to work in a challenging and engaging work environment that promotes teamwork, creativity, accountability, and professional development
LabVIEW or ESS programming experience is a plus
Current IPC-A-610 or J-STD-001 solder certification is a plus

Job Responsibility

Perform board level and system level programming and testing using automated test fixtures
Perform optical alignment and testing
Operate environmental stress screening (ESS) chambers through highly accelerated life testing (HALT)
Capture and document test data as part of production automated test procedures (ATP) and product traveler documentation
Analyze test data in-situ and root cause test issues
Work with engineers and manufacturing technicians to improve test procedures and fixtures
Perform product assembly as needed, including soldering, potting, and mechanical assembly
Other duties as assigned

Fulltime

New

Senior Test Technician

The Senior Test Technician is responsible for conducting prescribed tests on tec...

Location

United States , Wilsonville

Salary:

Not provided

APCON

Expiration Date

Until further notice

Requirements

Experience performing functional test and diagnostics using custom PC based test equipment and software
Working knowledge of MS Office applications (Excel, Word, Outlook)
Detail oriented with the ability to multi-task to meet multiple deadlines
Strong verbal and written communication skills
Ability to work over time when needed
Maintain safe working practices and comply with safety and quality standards
Associate degree in electronic hardware systems engineering or equivalent from the military or technical school preferred
Minimum of 3 years of electronic technician experience, including troubleshooting to the component level, in a production environment

Job Responsibility

Performs functional and operational tests on circuit boards and chassis in a fast-paced production environment
Troubleshoot and repair electronic circuit boards and systems down to the component level
Support hardware validation and verification activities during development and production phases
Interpret schematics PCP and Layouts, to diagnosed failures accurately
Troubleshoot products using oscilloscopes and digital volt meters
Configures and tests end products to meet customer and company specifications and requirements
Configures test equipment to meet multiple testing requirements based on product and customer specifications
Evaluates returned products for failures
Maintains accurate documentation of product test results and updates troubleshooting logs

What we offer

Medical, dental, and vision insurance
Company-paid short and long-term disability
Flexible spending accounts
Generous PTO program
401(K) Retirement Savings Plan with company match
Professional development program
Collaborative and innovative environment
On-site exercise facility

Fulltime

Battery Cell Mechanical Test Technician

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...

Location

United States , Hayward

Salary:

65000.00 - 90000.00 USD / Year

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

Associate degree or technical diploma in Mechanical Engineering Technology, Mechatronics, or equivalent hands-on experience
5+ years of experience in a testing, fabrication, or lab environment
Familiarity with machining, 3D printing, and mechanical assembly techniques
Ability to read engineering drawings and follow detailed instructions
Proficiency in using standard measurement tools and lab instrumentation
Strong troubleshooting and problem-solving skills in a hands-on environment

Job Responsibility

Build and maintain test setups that replicate module- and pack-level loading conditions for cells
Apply lab-scale fabrication techniques, including machining, 3D printing, and adhesive bonding, to create fixtures and test hardware
Operate lab equipment such as chillers, pumps, and load frames to conduct controlled mechanical tests
Install and use sensors (temperature, pressure, displacement, force) to capture accurate test data
Support troubleshooting of test rigs, equipment calibration, and fixture maintenance
Work closely with engineers to refine test methods and ensure repeatable, reliable results
Maintain detailed records of test setups, conditions, and results to support engineering analysis
Follow strict safety procedures when working with high-voltage components and lab machinery

Battery Cell Test Technician

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...

Location

United States , Irvine

Salary:

65000.00 - 90000.00 USD / Year

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

Associate degree or technical diploma in Electrical Engineering, Mechanical Engineering, Materials Science, or equivalent experience
5+ years of hands-on experience in a lab, test, or manufacturing environment involving batteries, electronics, or related technologies
Familiarity with lithium-ion cell handling, testing, and safety protocols
Strong mechanical and electrical aptitude with ability to follow detailed procedures
Proficiency in using test equipment and basic data recording tools

Job Responsibility

Perform testing and benchmarking of cells sourced from multiple suppliers and chemistries
Support evaluation of different form factors, including pouch, prismatic, blade, and cylindrical cells
Execute test protocols for advanced concepts such as solid-state cells and extremely fast-charging (XFC) cells
Assist in the exploration of emerging cell technologies, including low-cost sodium-ion and region-specific innovations (U.S.-based, EU-based, etc.)
Prepare cells for testing, including assembly, disassembly, and fixture setup
Operate lab equipment such as cyclers, impedance testers, and environmental chambers
Collect and document test results with high accuracy to support engineering analysis and benchmarking reports
Maintain lab organization, safety compliance, and accurate test records

Commissioning HV Technician – SWG Testing

Select Offshore is looking for experienced HV Technicians to join the commission...

Location

United States

Salary:

Not provided

Select Offshore

Expiration Date

Until further notice

Requirements

Proven experience in HV testing or commissioning on wind turbines or power systems
Familiarity with switchgear, protection systems, and energization processes
Strong safety awareness and compliance with HV safety protocols
Good technical documentation and reporting skills
Ability to work as part of a high-performing site-based commissioning team
Must be eligible to work in the United States
Offshore wind or renewable energy experience preferred

Job Responsibility

Perform high-voltage commissioning and completion tasks on wind turbines
Conduct switchgear testing and system verification activities
Follow procedures and work instructions provided by commissioning leadership
Ensure all HV work is carried out to relevant industry and safety standards
Assist with documentation, reporting, and progress tracking
Collaborate with onshore and offshore teams to ensure seamless handover
Participate in toolbox talks, safety briefings, and quality checks
Support incident reporting and proactive risk management on site

Fulltime

Software Test Support Technician

Do you have a passion for IoT and everything remote-controlled? Are you curious ...

Location

Australia , Kewdale, Western Australia

Salary:

Not provided

Remote Control Technologies Pty Ltd

Expiration Date

Until further notice

Requirements

Certificate IV in Electronics and Communications or similar
Knowledge and skilled in setting up hardware systems to support software testing
Knowledge and skilled in electronics test hardware
Knowledge in programming automated software test systems
At least one communication protocol
Articulate in written and spoken skills
Excellent grammar and spelling accuracy
Ability to critique and correct documentation
Excellent time management skills
Willingness to learn and develop within the role

Job Responsibility

Setting up electronic test systems to support the test team ensuring the test systems are ready and operational when required
Create harness and cable assemblies to connect hardware test tools to the system under test
Under the direction of the Test team manager create new hardware test tools when required using off the shelf test systems and electronic modules
Document and maintain the test systems to ensure they are functional to their defined specification
Be involved in manual software testing when required
Contribute to the review of RCT quality processes in the software test area when required
Independently track and manage the progress of your assigned testing activities, ensuring alignment with team objectives
Maintain the register of equipment and supervise the safe usage of any equipment loaned to other departments within the business
Other duties as directed by the Software Test Team Lead or Head of Engineering

What we offer

Attractive remuneration
Great work environment
Paid parental leave (after qualifying period)
Employee Assistance Program
Lifestyle financial solutions
A broad role that offers variety and challenges
Work with a team of high-performing professionals
An established business (50 years) in a high-growth technology industry, part of the leading global mining and infrastructure equipment company Epiroc

Battery Test Technician

We are seeking a Battery Test Technician to support the development and validati...

Location

United States , San Jose

Salary:

Not provided

Figure

Expiration Date

Until further notice

Requirements

5+ years of hands-on experience in testing, validation, or R&D support
Experience with high-voltage systems and a strong understanding of safety protocols
Proficiency in battery pack assembly, testing procedures, and basic failure analysis
Strong understanding of electrical schematics with the ability to troubleshoot circuits
Hands-on experience with soldering, crimping, and wire harness assembly
Proficiency with test instruments (e.g., multimeters, oscilloscopes, DAQs)
Strong documentation and reporting skills
Excellent attention to detail, organizational skills, and ability to manage multiple priorities
Willingness to travel to test facilities and work in hands-on environments

Job Responsibility

Prepare and execute battery tests following engineering test outlines and procedures
Instrument battery assemblies and test fixtures to enable accurate data acquisition
Collect, document, and share test results with engineering teams for analysis
Assemble and build test samples
Perform test execution and post-test teardowns, including failure analysis
Travel (~35%) to off-site testing facilities as required
Fabricate test fixtures and prototype components as needed
Troubleshoot and repair complex electro-mechanical systems
Suggest and implement process improvements based on test outcomes
Operate test instruments such as multimeters, oscilloscopes, ohm testers, DAQs, and bidirectional converters

Test technician

Randstad

Location:
Belgium, Ypres

Category:
Manufacturing

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 21, 2025

Expiration:
January 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test technician

Component Test Technician

Electronics Test Technician

Senior Test Technician

Battery Cell Mechanical Test Technician

Battery Cell Test Technician

Commissioning HV Technician – SWG Testing

Software Test Support Technician

Battery Test Technician

Test technician

Randstad

Location:Belgium, Ypres

Category:Manufacturing

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 21, 2025

Expiration:January 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test technician

Component Test Technician

Electronics Test Technician

Senior Test Technician

Battery Cell Mechanical Test Technician

Battery Cell Test Technician

Commissioning HV Technician – SWG Testing

Software Test Support Technician

Battery Test Technician

Location:
Belgium, Ypres

Category:
Manufacturing

Contract Type:
Employment contract

Job Posted:
December 21, 2025

Expiration:
January 20, 2026