Test Technician I Job at iAutomation (Franklin)

New

Electronic Maintenance Technician I (Radar Technician I)

The Electronics Maintenance Technician I (Radar Tech I) supports the maintenance...

Location

United States , Eielson AFB

Salary:

39.04 USD / Hour

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical training in electronics preferred
1-2 years of experience in electronics maintenance or repair
proficiency in using electronic test equipment such as multi-meters and oscilloscopes
ability to follow Air Force TOs and OEM documentation
strong communication and teamwork skills
eligible for DoD security clearance

Job Responsibility

Perform routine maintenance, including periodic, scheduled, unscheduled, and preventative checks, following TOs and OEM documentation
Replace components, wire circuits, repair simple electronic equipment, and conduct configuration management
Use test instruments such as digital multi-meters, oscilloscopes, and signal generators to verify system functionality
Operate assigned threat systems to prepare radars and equipment for scheduled training events, ensuring threat-faithful performance during JPARC operations
Track, manage, and replenish spares inventory to ensure system readiness
Interface with Air Force depot systems to ensure accurate reporting on supported threat systems
Prepare and submit reports, including Proposed Spare Parts Lists and Inventory/Utilization Data
Work under close supervision, receiving frequent technical guidance and support from supervisors or senior technicians

What we offer

Medical
Dental
401k
Annual Cold Weather Bonus

Fulltime

Electronic Maintenance Technician I (Radar Technician I)

The Electronics Maintenance Technician I (Radar Tech I) supports the maintenance...

Location

United States , Eielson AFB

Salary:

Not provided

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
technical training in electronics preferred
1-2 years of experience in electronics maintenance or repair
Familiarity with Unmanned Mobile Threat Emitters or similar systems preferred
Proficiency in using electronic test equipment such as multi-meters and oscilloscopes
Ability to follow Air Force TOs and OEM documentation
Strong communication and teamwork skills
Eligible for DoD security clearance
US Citizenship required
Ability to lift up to 50 pounds

Job Responsibility

Perform routine maintenance, including periodic, scheduled, unscheduled, and preventative checks, following TOs and OEM documentation
Replace components, wire circuits, repair simple electronic equipment, and conduct configuration management
Use test instruments such as digital multi-meters, oscilloscopes, and signal generators to verify system functionality
Operate assigned threat systems to prepare radars and equipment for scheduled training events, ensuring threat-faithful performance during JPARC operations
Track, manage, and replenish spares inventory to ensure system readiness
Interface with Air Force depot systems to ensure accurate reporting on supported threat systems
Prepare and submit reports, including Proposed Spare Parts Lists and Inventory/Utilization Data
Work under close supervision, receiving frequent technical guidance and support from supervisors or senior technicians

What we offer

Medical
Dental
401k
Annual Cold Weather Bonus

Fulltime

Control Panel Builder I (Service Technician I)

As a Control Panel Builder I (Service Technician I), you will be responsible for...

Location

United States , Buffalo

Salary:

22.33 - 29.05 USD / Hour

Alliance Automotive UK LV Ltd

Expiration Date

Until further notice

Requirements

Typically requires a high school diploma or GED
One (1) to Three (3) years of shop experience or an equivalent combination
Ability to read schematics
Strong communication skills required
Basic mechanical knowledge
Ability to operate shop equipment safely
Ability to work independently or in a team environment with minimal supervision
Must be eligible to work in the US without Visa Sponsorship

Job Responsibility

Assemble / install industrial control panels using hand and power tools
Read and interpret blueprints and schematics and recognize components
Assemble electro-mechanical components with interconnected wiring
Cut, strip, bend and mount wires to connect electrical components within the control panel
Document modifications or as-built conditions on drawings
Test continuity of circuits in electrical wiring
Work with low voltage electricity and electrical components
Work with Engineering staff to help improve quality and efficiency
General manufacturing and assembly duties will be assigned when control panel shop work is not available

What we offer

options for healthcare coverage, 401(k), tuition, reimbursement, vacation, sick, and holiday pay

Fulltime

New

O&M Technician I (Night shift)

The O&M Technician I performs a variety of operation and maintenance functions a...

Location

United States , Franklin Township

Salary:

26.00 - 28.00 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

High School Diploma/GED is required
Requires good reading, math, writing, scientific, and verbal communication skills
a mechanical aptitude
and the ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment
Must be able to obtain NJ T1 license within 18 months of hire
Must have and maintain a valid driver’s license with a safe driving record
The ability to perform tasks requiring standing and walking for extended periods of time
The ability to climb stairs, squat, and work with hands extended above head and in front of the body
Must be able to lift up to and carry 50 pounds
Requires close visual and hearing observation to detect non-conformance and machine malfunction

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

paid time off policies
health insurance
dental insurance
vision insurance
life insurance
savings accounts
tuition reimbursement
paid volunteering
employer sponsored 401(k) plan
up to 3% Annual Performance Bonus

Fulltime

New

O&M Technician I

Under the direction of Project Management, performs work involving the day-to-da...

Location

United States , Litchfield

Salary:

24.04 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

High School Diploma/GED is required
Less than 2 years of experience in the water industry or related fields
Strong reading, math, writing, and verbal communication skills
Strong mechanical aptitude and ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment
Computer skills, knowledge of Windows, Office and/or CMMS
Troubleshooting/problem solving skills
Ability to understand/execute written and oral instructions, read/understand instructions
Must be able to work as a team in a teamwork-oriented environment
Must be safety conscious
The ability to obtain an IL Class C Water Treatment Operator license within 24 months of hire is highly encouraged

Job Responsibility

Performs a variety of basic operational and maintenance tasks relevant to maintaining safe and reliable operations of water treatment facilities and systems ensuring operational compliance with state and federal regulations
Routine cleaning and general housekeeping duties in work and plant areas as assigned, including but not limited to sweeping, dusting, mopping, painting, and cleaning of other process equipment and areas
Ability to understand and carry out written and/or verbal work orders and assignments
Ability to perform simple math calculations with the use of a calculator
Ability to learn and utilize CMMS system to schedule and complete work orders
Ability to properly collect water quality samples, test and maintain collection records
Perform work in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures
Work weekends, holidays, and be on-call on a rotating basis/schedule with fellow operators
Respond to emergencies, work additional hours as required to complete tasks as/and when needed
Assists project and department to develop a culture of focus and engagement at the project to achieve EH&S excellence

What we offer

Paid time off policies
health, dental, vision, and life insurance
retirement plans, savings accounts
tuition reimbursement
paid volunteering

Fulltime

New

Geotechnical Engineering Technician I

Support geotechnical and materials projects by supporting tasks including but no...

Location

United States , Las Vegas

Salary:

Not provided

Terracon Consultants, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
6 months experience required
A valid driver’s license with acceptable violation history may be required
Obtain Nuclear Density Gauge certification within 60 days of hire
Obtain NAQTC Sampling & Density and ACI Field Testing Grade I certification within 12 months of hire
Obtain ICC Soils Certification within 12 months of hire
Obtain additional certifications and interview to be listed on CCBD’s Approved Listing
Successful completion of related internal safety certifications

Job Responsibility

Support geotechnical and materials projects by supporting tasks including but not limited to performing pile installations, pile load testing (axial tension, lateral, and axial compression), and pile removal, as well as field and/or laboratory testing, observation and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel)
Communicate with project manager, engineering technicians, client representatives, contractor’s representatives and others as applicable regarding the construction site conditions, project requirements, and testing, observation, and inspection requirements and results
Transport material samples with associated identifying documentation to the laboratory for further testing and analysis
Tabulate, prepare, and submit data and observations in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager
Maintain and clean equipment, vehicles and work areas
Adhere to strict safety standards
Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties
Provides clear documentation of findings and results
Communicates information to Project Manager and discusses accuracy of data in preparation for submittal
Submits documentation and communicates results as directed by the Project Manager

What we offer

Medical
Dental
Vision
Life insurance
401(k) plan
Paid time off and holidays
Education reimbursement
Various bonus programs

Fulltime

New

Production Technician I, Kiefel

The Kiefel Production Technician I is a Salaried Non-Exempt position which contr...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
Normal visual acuity required
Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
Applicants must be authorized to work for any employer in the U.S.

Job Responsibility

Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product and ensure that the quality standards have been met
Load and secure finished product in mobile closets
Execute a machine changeover when assigned (material changeovers only)
Document required information on manufacturing logs and/or POMS system
Identify, correct or escalate any inefficiency in the machine's performance
Test, inspect and package Inter-Plant Shipping Orders (IPSO)
Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

New

MK-30 Underwater Target Technician I

Amentum is seeking a MK-30 Underwater Target Electronics Technician I to join ou...

Location

The Bahamas , Andros Island

Salary:

22.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
One (1) year electronics technology experience and two (2) years of experience with Microsoft Office Suite products, with an emphasis on word processing
Experience with multimeters, AFG’s and oscilloscopes required
Must be able to lift, push, pull or carry 50 lbs
Must be able to reside in remote work location with limited medical facilities
Valid U.S. passport and driver’s license are required
Must be able to obtain and maintain a Secret U.S. Government Clearance. Note: U.S. Citizenship is required to obtain a Secret Clearance.

Job Responsibility

Perform detailed testing procedures to diagnose causes of equipment malfunction
Disassemble components and trace circuit continuity through stages of equipment
Repair circuit wiring and replace faulty components as required
Under supervision, perform authorized modifications, preventative maintenance, and final testing of equipment
Install tracking systems in direct accord with NAVSEA specifications and guidelines
Maintain a controlled supply area for providing needed assets to the MK 30 Program within the Range Support Shop - MK 30 Targets Program
Troubleshoot and repair a variety of electronic systems
Perform other job-related duties as assigned or requested

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Select Country

Test Technician I

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?