Test Engineer - Space Electronics Job at BLUESTREAM PEOPLE

Electrical Engineer III

Arcfield was purpose-built to protect the nation and its allies through innovati...

Location

United States , Louisville, Colorado

Salary:

78649.80 - 136756.74 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

BS 5-7 Years, MS 3-5, PhD 0-2
Excellent documentation skills, including the preparation of Test Procedures & Reports, Interface Control Documents, and ECOs
Extensive experience in prototype development, debug, and test in a lab environment
Familiarity with various communication interfaces (I2C, SPI, UART, RS-232, RS-422, RS-485, CAN)
Proficiency in high-speed digital, analog, and mixed-signal circuit design, troubleshooting, and an excellent grasp of EE principles
Experience in system and sub-system testing including test design, procedure definitions, procurement, assembly, execution, analysis & reporting
Knowledge of cable and wire harness design
Experience with flight hardware safety protocols such as Electrostatic Discharge, clean room practices and critical lifting operations
Ability to travel to support meetings with customer and potential testing
Ability to work in a tight-knit team environment as well as self-driven for independent tasks

Job Responsibility

Works on assignments requiring considerable judgment and initiative
Develop solutions to routine technical problems of limited scope following detailed instructions
Performs an assortment of complex engineering duties such as the planning of manufacturing and the installation, operation, and maintenance of electrical apparatus
Provides existing support to activities in the use of electrical devices and energy for commercial, domestic, and industrial use
Design and develop electronics and circuits
Perform product testing and create models and prototypes
Develop and document electronic schematics for products
Performs a variety of engineering work in designing, planning and overseeing manufacture, construction, installation, operation, and maintenance of electric or electronic components, equipment, systems, facilities, and machinery used in generation, transmission, distribution, and utilization of electrical energy for domestic, commercial, and industrial consumption
Works directly with engineers in other disciplines to augment production size and value
May provide work leadership and training to lower level professional and technical staff

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs
other optional benefit elections

Fulltime

Electrical Engineer III

Arcfield was purpose-built to protect the nation and its allies through innovati...

Location

United States , Louisville

Salary:

78649.80 - 136756.74 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

BS 5-7 Years, MS 3-5, PhD 0-2
Excellent documentation skills, including the preparation of Test Procedures & Reports, Interface Control Documents, and ECOs
Extensive experience in prototype development, debug, and test in a lab environment
Familiarity with various communication interfaces (I2C, SPI, UART, RS-232, RS-422, RS-485, CAN)
Proficiency in high-speed digital, analog, and mixed-signal circuit design, troubleshooting, and an excellent grasp of EE principles
Experience in system and sub-system testing including test design, procedure definitions, procurement, assembly, execution, analysis & reporting
Knowledge of cable and wire harness design
Experience with flight hardware safety protocols such as Electrostatic Discharge, clean room practices and critical lifting operations
Ability to travel to support meetings with customer and potential testing
Ability to work in a tight-knit team environment as well as self-driven for independent tasks

Job Responsibility

Works on assignments requiring considerable judgment and initiative
Develops solutions to routine technical problems of limited scope following detailed instructions
Performs an assortment of complex engineering duties such as the planning of manufacturing and the installation, operation, and maintenance of electrical apparatus
Provides existing support to activities in the use of electrical devices and energy for commercial, domestic, and industrial use
Design and develop electronics and circuits
Perform product testing and create models and prototypes
Develop and document electronic schematics for products
Performs a variety of engineering work in designing, planning and overseeing manufacture, construction, installation, operation, and maintenance of electric or electronic components, equipment, systems, facilities, and machinery used in generation, transmission, distribution, and utilization of electrical energy for domestic, commercial, and industrial consumption
Works directly with engineers in other disciplines to augment production size and value
May provide work leadership and training to lower level professional and technical staff

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs
other optional benefit elections

Fulltime

Principal Hardware / Electronics Engineer

Are you a senior engineer ready to own high-stakes designs that power the future...

Location

United States , Austin

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

Bachelor’s degree or higher in Electrical Engineering
9+ years of experience in electronics design, analysis, and test
Proven track record of delivering complex board-level electronics through production
Expertise in high-reliability space or defense hardware, including derating, WCA, and thermal constraints
Advanced proficiency in PCB layout, manufacturing, and HDI stackup design
Strong background with SI/PI simulation tools (e.g., SIwave, ADS SIPro, Hyperlynx)
Extensive lab experience with bring-up, verification, and specialized equipment
Strong knowledge of adjacent disciplines (software, mechanical) to guide system design
Expert-level proficiency in Altium and other electronics design tools
Excellent written and verbal communication skills

Job Responsibility

Own full-stack design of complex electronics modules and systems from concept to production
Lead teams of engineers developing advanced digital, RF, and power electronics hardware
Provide subject matter expertise across programs, guiding technical rigor and methodology
Develop system architectures and author detailed hardware requirements
Perform schematic design, component selection, and PCB layout (Altium Designer)
Conduct detailed analysis, including worst-case circuit, signal integrity, and power integrity studies
Plan and execute bring-up and verification of modules and integrated systems
Release hardware to production in collaboration with manufacturing and test teams
Mentor junior and senior engineers, building technical depth and professional growth
Leverage cross-disciplinary knowledge (software, mechanical, systems) to optimize hardware architectures

What we offer

Competitive Base
Equity
Benefits
Flexible PTO

Fulltime

Manufacturing Test Engineer

Meta's Reality Lab's organization brings together experts to develop and ship gr...

Location

United States , Sunnyvale

Salary:

144000.00 - 204000.00 USD / Year

Production Reliability Engineer

This role is responsible for assuring the reliability and quality of ICEYE’s sub...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electronics, Mechatronics, or Electrical Engineering, or equivalent practical experience in a high-reliability production environment
Minimum 5 years of experience in production quality assurance, manufacturing engineering, or process reliability within electronics, aerospace, or high-reliability manufacturing
Solid understanding of quality assurance activities, subassembly production processes (gluing, soldering, assembly, testing, etc.), process control, ESD/FOD/cleanliness requirements, and space or electronics manufacturing standards (e.g., ECSS, IPC-A-610, workmanship)
Proficiency in data-driven problem solving (e.g., 8D, 5 Whys)
Strong risk-based thinking, analytical mindset, and a hands-on approach. Demonstrated ability to train, influence, and collaborate with operators and engineers
Fluency in English (written and verbal)

Job Responsibility

Oversee subassembly production operations, ensuring all outcomes meet established requirements and quality standards
Develop and maintain inspection plans, checklists, and quality documentation in close coordination with Design and Process Engineering
Monitor and validate operator self-verifications and in-process checks, ensuring compliance with defined inspection procedures and standards
Provide training and guidance to production technicians on inspection criteria, ESD and FOD control, cleanliness, and proper handling of EEE components
Lead and support PFMEAs and risk analyses for subassembly processes to proactively identify and mitigate quality risks
Support and participate in non-conformance investigations and contribute to effective corrective and preventive actions
Ensure that verification activities and production readiness checks are properly completed before production starts, and that open non-conformances are resolved
Monitor production and quality metrics, including yields, process capability, and rework trends, to identify early warning signals
Oversee adherence to material handling and equipment calibration standards (including ESD, cleanliness, and FOD controls)
Drive and contribute to continuous improvement initiatives with AIT Engineering and Production teams

What we offer

Occupational healthcare, occupational, and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of choice
Relocation support (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus

Fulltime

Senior Electronics Technician

Senior Electronics Technician – Space Hardware. We’re working with a fast-growin...

Location

United Kingdom , Glasgow

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

HNC/HND (or equivalent) in Electronics or similar
5-10+ years hands-on electronics assembly, test, and fault-finding experience
Strong soldering skills (SMT & through-hole)
Experience with embedded electronics and production test environments
Comfortable working to detailed drawings, procedures, and quality standards

Job Responsibility

Hand-soldering and assembling high-reliability PCBAs (fine-pitch SMT, microscope work)
Building complex wiring harnesses and electro-mechanical assemblies
Integrating and testing electronic systems end-to-end
Troubleshooting at component and system level
Working closely with engineers on cutting-edge space hardware
Maintaining production and test documentation to high quality standards
Supporting lab equipment, inventory, and continuous improvement

What we offer

Work on flight hardware that goes into orbit
Learn space-grade electronics from industry experts
Be part of a passionate, highly skilled engineering team
Make the leap into the space sector without starting over

Fulltime

Team Leader, AIT Engineering

ICEYE is seeking an AIT (Assembly, Integration & Testing) Engineering Team Leade...

Location

Greece , Athens

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Electrical Engineering, Electronics, Telecommunications, Aerospace, or a related field
Strong technical background in RF systems, antennas, electronic boards, and/or RF test methodologies
Hands-on experience with satellite or complex electronics integration and testing, ideally across multiple subsystems
Solid understanding of system engineering fundamentals, including power systems, avionics, communications, and software–hardware interfaces
Experience with test equipment such as spectrum analyzers, network analyzers, signal generators, oscilloscopes, and RF measurement tools
Proven ability to troubleshoot issues across electrical, RF, and software domains during integration and system testing
Strong documentation skills, including writing test procedures, integration instructions, and test reports
Experience working with configuration management processes (ECOs, deviations, waivers, version control)
Ability and willingness to perform hands-on work on the production floor, including assembly, testing, and troubleshooting activities
Experience with satellite AIT, space hardware, or aerospace qualification campaigns

Job Responsibility

Establish and lead the AIT Engineering function at our Athens location
Contribute directly to AIT activities

What we offer

Occupational healthcare, occupational and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of choice
Relocation support (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus
A wide variety of the best coffee, tea, snacks, and sweets to accompany your daily space mission

Fulltime

Space Systems Test Engineer

Zachary Piper Solutions is seeking a Space Systems Test Engineer to support a cl...

Location

United States , El Segundo

Salary:

120000.00 - 135000.00 USD / Year

Piper Companies

Expiration Date

Until further notice

Requirements

Active Top Secret/SCI Clearance
Bachelors of Science in engineering, engineering technology, STEM
3-5+ years of experience working with specialized test equipment, instrumentation using electrical engineering test methodologies
3-5+ years experience performing automated tests and troubleshooting electronics equipment, hardware, and software
Experience working in a lab or production environment
Experience in software tools based in C#

Job Responsibility

Contributes to the creation and validation of test methodologies
Executes comprehensive test procedures, including defining instrumentation and configurations to reduce risk within the parameters of the test plan
Develops targeted solutions for calibration system issues with limited scope and impact
Designs test hardware, software, and systems to meet specified testing requirements
Processes, analyzes, and formats data in alignment with customer specifications
Evaluates test data—including anomalies—for accuracy, quality, and fidelity prior to customer delivery
Compiles and publishes test reports to document outcomes and fulfill requirements
Communicates test results to internal stakeholders
Organize and archive test data and reports

What we offer

PTO
11 Paid Holidays
Sick leave as required by state law
Cigna Medical, Dental, and Vision
401k with ADP
Certification reimbursement

Fulltime

Test Engineer - Space Electronics

BLUESTREAM PEOPLE

Location:
United Kingdom

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 17, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test Engineer - Space Electronics

Electrical Engineer III

Electrical Engineer III

Principal Hardware / Electronics Engineer

Manufacturing Test Engineer

Production Reliability Engineer

Senior Electronics Technician

Team Leader, AIT Engineering

Space Systems Test Engineer

Test Engineer - Space Electronics

BLUESTREAM PEOPLE

Location:United Kingdom

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:February 17, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test Engineer - Space Electronics

Electrical Engineer III

Electrical Engineer III

Principal Hardware / Electronics Engineer

Manufacturing Test Engineer

Production Reliability Engineer

Senior Electronics Technician

Team Leader, AIT Engineering

Space Systems Test Engineer

Location:
United Kingdom

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 17, 2026