Test Engineer for Avionics Integration Job at Sopra Steria (Manching)

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...

Location

Canada , London, Ontario

Salary:

Not provided

ITPS (CANADA) LTD

Expiration Date

Until further notice

Requirements

Solid understanding of aircraft electrical systems, power distribution, and signal integrity
Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
Understanding of regulatory and airworthiness documentation standards in aerospace systems
Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
Experience with Matlab or IADS for system analysis and data visualization

Job Responsibility

Lead design and development of aircraft electrical systems from concept to production
Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
Design and review custom PCB layouts and avionics harnessing
Oversee component selection, BOM management, and procurement coordination
Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
Provide technical support during installation, troubleshooting, and acceptance testing phases

Fulltime

Senior Test Engineer Analyst

Phalanx Griffon (PG) is the Air Force’s next‑gen airborne node connecting warfig...

Location

United States , Dayton

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
A High School Diploma plus 20 years of experience with proper certifications, a Bachelors degree in an applicable discipline and 15+ years of DoD system‑of‑systems test engineering, including lab‑to‑flight progression, or a Masters degree plus 12 years of experience
Active TS/SCI clearance
Proven leadership of large‑scale DT/OT efforts for avionics, communications, or C2 systems
Hands‑on with test automation frameworks, instrumentation, and data‑analysis tools (MATLAB, Pandas, JMP, or similar)
Familiarity with MIL‑STD‑810/461, RCC 324/125‑15, or comparable environmental and EMI/EMC standards

Job Responsibility

Build the Program‑level Test & Evaluation Master Plan (TEMP) that links Nomad hardware, Smith software, and Watch ops‑support elements to CJADC2 mission threads and MR 2 exit criteria
Define DT/OT entrance & exit gates, traceability matrices, and milestone metrics within the Integrated Master Schedule
Design lab architectures replicating platform power, data, and environmental interfaces
oversee daily ops, configuration control, and security accreditation
Implement automated regression suites (Python/Robot Framework, Jenkins, Ansible, IXIA/Spirent) covering functional, performance, and cyber‑resilience tests
Lead ground and flight‑test events: draft test cards, hazard analyses, Interim Authorizations To Test (IATT), and Safety‑of‑Flight packages
Serve as lead flight‑test engineer or ground‑test conductor, capturing telemetry, logs, and spectrum traces
troubleshoot anomalies in real time
Perform statistical analysis of throughput, latency, crypto handshake times, SWaP‑C impacts, and mission‑effect metrics
Produce concise after‑action reports, deficiency reports (DRs), and recommendations for corrective action to IPTs and senior USAF stakeholders

Fulltime

Hardware Integration Engineer

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...

Location

United States

Salary:

Not provided

Merlin Labs

Expiration Date

Until further notice

Requirements

BS in Electrical or Aerospace Engineering
10+ years of relevant systems level electrical systems and integration design experience for the aviation, aerospace, industries
Experience integrating and testing avionics systems
Experience with component specification, supplier interaction, and procurement processes
Experience integrating and debugging systems containing COTS/MOTS modules, custom circuits, software, sensors, and human / machine / graphical user interfaces
Working knowledge of integrating various components using standard interface protocols such as ARINC 429, RS-232, RS-422, and RS-485
Familiarity with lab test equipment, including oscilloscopes, multimeters, current probes, data acquisition, and bus analyzers
Experience with wire harness design and connector component selection and sourcing
Outstanding organization, analytical, and problem-solving skills
Excellent written, verbal, and presentation communication skills

Job Responsibility

Lead and perform avionics systems integration and testing of components of our aircraft autonomy system
Write and maintain electrical systems requirements documents, electrical load analyses, and other related documents for prototyping and certification
Write, maintain and execute test plans and design verification documents
Specify, identify, integrate and verify Commercial/Modified-Off-the-Shelf (COTS/MOTS) electronic subsystems for aircraft installation
Prepare and release electrical design and fabrication documentation for partners, vendors, and customers
Work with suppliers, managing their performance to requirements, budget and schedule
Provide guidance to other electrical engineers and technicians across the team working on electrical and electronic aspects of the system architecture and schematics including power, computer, electro-mechanical, interconnect systems, wireless communications, cable harnesses, packaging, cable routing, and user interfaces and controls
This position may require up to 50% travel to both domestic and international locations to support hardware integration

What we offer

health
dental
life
unlimited vacation
401k with match

Fulltime

Avionics Engineer

Mainsail Group is looking for an experienced Avionics Integration Engineer to jo...

Location

United States , Hanscom AFB, MA

Salary:

Not provided

MAINSAIL Group

Expiration Date

Until further notice

Requirements

Engineering degree
15 years of experience in aeronautical engineering and/or weapon systems development and integration
8 years of experience in support of DoD acquisition contracts
Progressive experience in engineering development projects, to include engineering documentation, design drawings, engineering changes and notices, and planning/conducting design audits
Secret security clearance (minimum)
Top Secret security clearance (preferred)
Prefer experience with major aircraft development/integration programs

Job Responsibility

Provide expertise in aircraft structures, subsystems, and mechanical systems
Provide technical input on aircraft aerodynamic design and performance
Support processes to acquire and sustain a commercial derivative aircraft
Evaluate the EMD contractor's aircraft system and subsystem design
Evaluate and assess the EMD contractor's design and deliverables
Develop and implement an Aircraft Integrity program and a Corrosion Prevention and Control program
Manage implementation and completion of Aerial Refueling Certification and clearance processes
Analyze and manage Size, Power, Cooling, and Weight and Balance designs
Support test planning and execution and review of associated documents
Prepare technical documents, management reports, and conduct technical presentations

Fulltime

Staff Flight Deck Avionics Systems Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

151680.00 - 189600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

8+ years of experience in Integrated avionics systems development, integration and/or installation
Experience with FMS and FGS functional definition
Good understanding of aviation protocols (A429, Ethernet, RS-232/RS-422, Discretes, Analogs, CAN bus)
Experience on one or more programs with a formal Systems Engineering process
Experience with: 14 CFR Part 23 and/or 25 Certification, ARP-4754/ARP-4761, DO-254, DO-178b/c
Experience with functional and non-functional requirement definition for Integrated Avionics computing and networking components
Experience executing formal Validation and Verification activities in a civil aerospace program
Significant Experience with Requirements Management Tools such as Polarian and/or DOORS
Excellent verbal and written interpersonal communication
Passion for learning and problem solving

Job Responsibility

Perform a wide range of tasks including: requirements development, system modeling, interface definition, safety analysis, verification procedure creation and test execution
Ensure Flight Management (FMS) and Flight Guidance (FGS) Subsystem(s) requirement sets are complete and correct, with traceability to and fulfilling higher-level requirements
Perform Integration activities of the Avionics System including the Flight Management (FMS) and Flight Guidance (FGS)Subsystems in the Labs
Assist with definition of installation and qualification requirements for the FMS & FGS equipment within the Avionics System
Work with Pilots, Operators, and Human Factors to optimize the FMS and FGS functionality
Coordinate integration of the FMS & FGS Subsystem with other Aircraft Systems (Flight Controls, High-Voltage Power, etc, …)
Manage and develop supplier relationships
Collaborate with other System Engineers to ensure the fully integrated aircraft meets its requirements and is optimized
Coordinate Integrated Avionics related development, integration and verification activities between Archer teams and suppliers
Based in Archer HQ, San Jose, CA. Travel: 10% or less

Fulltime

Hardware Integration Engineer (Mechanical)

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...

Location

United States

Salary:

Not provided

Merlin Labs

Expiration Date

Until further notice

Requirements

BS in Mechanical, Electro-Mechanical, or Aerospace Engineering and 5+ years technical work experience
Advanced modeling experience with tools such as SolidWorks, Catia, OnShape, Fusion, or Creo
Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test
Experience leading activities such as mechanism design, controls design and analysis, environmental analysis (thermal, vibration, airflow), and structural analysis
Outstanding organization, analytical, and problem-solving skills
Excellent written, verbal, and presentation communication skills

Job Responsibility

Design, integrate, and test avionics and control components for aircraft and test labs
Oversee design and analysis tasks for system integration including stress and model analyses
Provide CAD work in support of design activities, including application of industry best-practices for GD&T
Support and participate in testing activities – component, system development, and system certification – as needed including test plan creation, data analysis, and test report generation and documentation
Prepare and coordinate mechanical design and fabrication drawings and related documents
This position may require up to 25-50% travel, sometimes with short notice, to both domestic and international locations to support aircraft and system integration and testing

What we offer

health, dental, life, unlimited vacation, and 401k with match

Fulltime

Avionics Systems Engineer

Would you like to contribute to the integration of safety-critical embedded syst...

Location

Canada , Montréal

Salary:

Not provided

Sopra Steria

Expiration Date

Until further notice

Requirements

University degree in Electrical, Computer, Aerospace Engineering or equivalent
Relevant experience in the integration and/or validation of avionics systems
Knowledge of avionics system architectures
Significant experience with DOORS is mandatory
Strong understanding of qualification, safety assessment, and certification standards, particularly military ones such as MIL-STD-810, MIL-HDBK-217, or similar
Ability to read wiring diagrams and interpret technical documentation
Proficiency in French and English (bilingualism is an asset)
Strong analytical skills, attention to detail, autonomy, and a good team spirit

Job Responsibility

Ensure the functional integration of avionics systems (FMS, GPS, VHF, ADS-B, TCAS, etc.) on test benches, simulators, or aircraft
Configure and validate embedded systems through ground testing (regression, non-regression, environmental, EMI testing, etc.)
Diagnose and resolve system, software, or interface issues (avionics/cabin/network)
Develop and execute test procedures based on system requirements (ARP4754A, DO-178C, DO-160G)
Analyze test results and document validation reports, non-conformity reports, and traceability matrices
Interpret wiring diagrams, Interface Control Documents (ICDs), and functional logic schematics
Participate in technical reviews (PDR, CDR, TRR) with system, development, flight test, and certification teams
Contribute to the setup and deployment of test and automation tools (Python, TestStand, LabVIEW, etc.)
Collaborate with certification teams to ensure compliance with civil or military standards

What we offer

Hybrid Work
Industry leading medical, dental, and vision Insurance
Access to a telemedicine service
RRSP program
Personal and sick days
Recreation room with pool table and foosball table

Fulltime

Subject-Matter Expert Avionics Engineer

Phalanx Griffon (PG) is the Air Force’s open‑architecture airborne node linking ...

Location

United States , Dayton

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship
Active TS/SCI clearance
High School Diploma plus 20 years of experience
Must have been directly involved with avionics engineering and have focused on this technical area for over 20 years
has published work or work samples showing that they are an expert in this field
have participated in technical presentations/roadshows/conferences as an expert in their respective field
Expert knowledge of MIL‑STD‑1553, ARINC‑429/664, Ethernet (TSN/AFDX), VPX architectures, and timing/synchronization methods
Demonstrated success integrating Type‑1 crypto, SATCOM/RF subsystems, and open mission systems (OMS/UCI, FACE, SOSA)
Hands‑on experience generating airworthiness artifacts and guiding systems through developmental & operational test
Proficiency with avionics E‑CAD and MBSE tools (CAMEO/MagicDraw, Rhapsody, Altium/OrCAD)

Job Responsibility

Define avionics integration schemes that marry Nomad VPX hardware with platform data buses (MIL‑STD‑1553, ARINC‑429/664, Ethernet TSN) and mission computers
Develop interface‑control documents (ICDs), signal‑flow diagrams, and timing budgets
ensure alignment with OMS/UCI messages and cross‑domain guard rules
Lead authoring of AF Form 1067s, E‑series flight‑clearance packages, and safety‑of‑flight analyses
Oversee DO‑254 (hardware) & DO‑178C (software) compliance artifacts where required
Capture avionics models in SysML/CAMEO and link to requirements, verification methods, and hardware part trees
Drive configuration‑control boards, red‑line incorporation, and model synchronization
Specify and validate wiring harnesses, signal conditioning, and power interfaces in the Integration SIL
Troubleshoot EMI/EMC, timing, and protocol issues
guide corrective actions through to flight‑test readiness

Fulltime

Test Engineer for Avionics Integration

Sopra Steria

Location:
Germany , Manching

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 04, 2026

Expiration:
March 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test Engineer for Avionics Integration

Electrical and Avionics Systems Engineer

Senior Test Engineer Analyst

Hardware Integration Engineer

Avionics Engineer

Staff Flight Deck Avionics Systems Engineer

Hardware Integration Engineer (Mechanical)

Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Test Engineer for Avionics Integration

Sopra Steria

Location:Germany , Manching

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 04, 2026

Expiration:March 19, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test Engineer for Avionics Integration

Electrical and Avionics Systems Engineer

Senior Test Engineer Analyst

Hardware Integration Engineer

Avionics Engineer

Staff Flight Deck Avionics Systems Engineer

Hardware Integration Engineer (Mechanical)

Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Location:
Germany , Manching

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
March 04, 2026

Expiration:
March 19, 2026