Test Engineer

Seeking a Test Engineer (Lab Engineer) for a full-time position with benefits. E...

Location

United States , Raleigh

Salary:

Not provided

GlobalEdge Technologies

Expiration Date

Until further notice

Requirements

Read electronic schematics and mechanical drawings
Familiar with test equipment such as oscilloscopes, signal generators, power supplies, and other standard lab equipment
Able to work under dynamic, time constraints, and multitasking conditions
Self-starter and always willing to learn
High sense of responsibility and urgency towards work assignments
Associate degree or equivalent experience
5-10 years experience

Job Responsibility

Component engineering
Work with the engineers to choose alternative components and update the BOM list
Work with the project managers to purchase components and track shipments
Work with the engineers to engage the suppliers
Building and testing prototyping devices
Construct, test, and repair prototype devices under test, including cables and connectors
Troubleshoot prototype devices using documentation and inputs from design engineers
PCBA rework and soldering

Fulltime

Construction Engineer

GRAEF, a leading U.S. consulting firm, has been providing exceptional careers an...

Location

United States , Milwaukee

Salary:

Not provided

GRAEF

Expiration Date

Until further notice

Requirements

Bachelor's degree in Civil Engineering or Construction Management
EIT certification is desired
Field experience in material testing, survey experience, and AutoCAD software/ design experience is a plus
Possess good communication skills, both written and verbal
Exceptional attention to detail and strong commitment to quality
Willingness to work outdoors in inclement weather is needed
Ability to work in a team
Holder of a valid driver's license
Internship or co-op experience is a plus

Job Responsibility

Construction inspection of WisDOT or municipal projects
Assist in the field inspections of roadway and utility construction including sewer system, watermain installation, bridge construction, retaining walls, asphalt and concrete roadways
Perform and review material testing of concrete, asphalt and aggregates
Complete daily construction reports, manually or electronically
Prepare As-Built drawings using AutoCAD
Design of highway and site development improvements, including roadways, site grading, storm drainage, water main distribution systems, sanitary sewer collection systems, and other site utilities
Preparation of local, state and federal permit applications
Assist in the preparation of design plans, specifications and quantities
Other duties as assigned

What we offer

Training, mentorship, and leadership development programs
A team atmosphere dedicated to open communication and collaboration
Flexible Hours/Hybrid Schedule
Embed yourself in the community by participating in numerous outside activities that GRAEF endorses and supports
Parental Leave
Paid Time Off
Medical/Dental/Vision Insurance
Life Insurance
Short-Term and Long-Term Disability
Flexible Spending Plans

Fulltime

Construction Project Engineer

We have a career opportunity for a Construction Engineer in our Connecticut divi...

Location

United States , Norwich

Salary:

100000.00 - 130000.00 USD / Year

RimePro Inc

Expiration Date

Until further notice

Requirements

BS in Civil Engineering, Construction Management, or related field
6+ years of working experience with DOT is preferred
Experience working on field projects desired
Excellent communication and intrapersonal skills
Strong organization and ability to perform services efficiently and within budgets and schedule
Ability to work outside on foot for extended periods of time
Willingness to be flexible with variable work shifts during the work week
Clean driving record and valid driver's license

Job Responsibility

Responsible for overseeing one or more key tasks on construction projects and complying with all project and company safety guidelines
Perform construction inspection and documentation and communicate if the work observed appears in compliance with project requirements
Prepare inspector’s daily reports and other project documentation as required by the project procedures, and being the example for documentation that supporting staff will refer to and checking their work
Report on progress of work, including technical issues, status of work remaining to be done and any noted deficiencies
Be the main point of contact at the field level for the Benesch team, as well as preparing calculations and supporting sketches for project documentation
Perform basic documentation audits, log, track and/or prepare responses to submittals and RFI’s and perform materials testing including concrete testing and density testing
Write meeting minutes and conduct select project meetings and participate in client events and relative association activities
Assist with client relationships, as well as assisting with writing responses to Requests for Proposals from clients

What we offer

Insurance
Retirement plans
Wellness programs
Tuition reimbursement for job-related courses
Ongoing professional development through resources like Red Vector, LinkedIn Learning, technical team meetings, knowledge-sharing training sessions
Personalized training and career development plans with your manager
Funding for training, committee work, professional organization memberships, and licenses/certifications
Support for active participation in professional organizations
Access to valuable retirement planning tools, education, and individual meetings with plan advisors at no charge
Potential for Benesch to contribute up to 9% of your gross compensation to your retirement plan

Fulltime

Project Engineer Highway Construction Management

Highly motivated, qualified and client service orientated Project Engineer speci...

Location

United States , Minneapolis; Dixon

Salary:

75000.00 - 85000.00 USD / Year

Bloom Companies

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Civil Engineering
DOT Construction Management experience
3+ years of progressive experience in construction inspection and construction layout staking
One or more of DOT construction material certifications in: Aggregate Production, Bituminous Plant, Bituminous Street, Bridge Construction, Concrete Field, Concrete Plant, Concrete Strength, Grading and Base
Familiarity with state Department of Transportation standards
Good decision making skills, flexibility, focus on quality and attention to detail
Excellent communication skills
Experience with Microsoft Office software (Excel, Word and Power Point) CADD (MicroStation preferred)

Job Responsibility

Construction schedule monitoring
Project budget monitoring
Field supervision of trained technicians
Translate and implement project plans and special provisions
Evaluate and document construction operations
Sample, test and provide acceptance for materials used on projects according to standards and special criteria
Complete required project documentation including progress payments and contract changes to achieve final project acceptance
Ensure quality control activities are performed for all assigned work and back check work of others
Interact and communicate effectively with design team members, clients and other agencies

Construction Engineer

GRAEF, a leading U.S. consulting firm, has been providing exceptional careers an...

Location

United States , Green Bay

Salary:

Not provided

GRAEF

Expiration Date

Until further notice

Requirements

Bachelor's degree in Civil Engineering
EIT certification preferred
Relatable internship experience in construction and designing transportation and/or municipal projects
Work experience in WisDOT construction and designing transportation and/or municipal projects preferred
Highway Technician Certifications preferred
Experience with Civil 3D software desired

Job Responsibility

Construction inspection of WisDOT, county and municipal projects
Assist in the field inspections of roadway and utility construction including sewer system, asphalt and concrete roadways
Perform and review material testing of concrete, asphalt and aggregates
Complete daily construction reports, manually or electronically
Prepare As-Built drawings
Design of highway and site development improvements, including roadways, site grading, storm drainage, water main distribution systems, sanitary sewer collection systems, and other site utilities
Preparation of local, state and federal permit applications
Assist in the preparation of design plans, specifications and quantities
Other duties as assigned

What we offer

Training, mentorship, and leadership development programs
A team atmosphere dedicated to open communication and collaboration
Flexible Hours/Hybrid Schedule
Embed yourself in the community by participating in numerous outside activities that GRAEF endorses and supports
Parental Leave
Paid Time Off
Medical/Dental/Vision Insurance
Life Insurance
Short-Term and Long-Term Disability
Flexible Spending Plans

Fulltime

Mechanical Engineer - Test Fixture Designer

As a Mechanical Engineer - Fixture Designer at Lunar, you will be responsible fo...

Location

United States , Mountain View

Salary:

130000.00 - 175000.00 USD / Year

Lunar Energy

Expiration Date

Until further notice

Requirements

Extensive experience in 3D Modeling software (e.g. Onshape, NX, Solidworks)
Knowledge of how to make a PCBA Bed of Nails fixture
Detailed knowledge of 2D Drawing creation and GD&T
Ability to analyze designs using Tolerance Analysis/Stackup, Statics/Load Path Analysis, Finite Element Analysis, Root Cause Analysis and Design Failure Modes and Effect Analysis
Familiarity with electronic test equipment and basic electromechanical troubleshooting
Experience with test fixtures, jigs, and various mechanical components for high cycle count
Experience with fine pitch assemblies and construction
Should be able to conduct strain gauge measurements and understand stress on PCBAs and incorporate proper design to avoid it
Experience with PCBA management such as Mechanical Control Outline generation
Working knowledge of pneumatic cylinders and control methods

Job Responsibility

Work back and forth with collaborators across the company to continuously refine and improve our understanding of how our products can create the greatest impact, get to market quickly, and operate reliably for our customers
Brainstorm and evaluate new solutions, weigh pros and cons, and narrow down options
Efficiently test ideas and designs: anything from back-of-the-envelope calculations to physical tests and multi-physics simulations
Design high-performance, reliable, easy-to-manufacture parts and assemblies, employing a variety of high-volume manufacturing processes
Create and review drawings and other part specifications
Manage bills of materials, cost and mass roll-ups, vendors and engineering releases
Define manufacturing processes and inspection methods
Collaborate directly with part manufacturers to support prototypes and production

What we offer

Medical, dental, and vision insurance for employees and dependents
Flexible Paid Time Off plus 10 paid holidays
Tax deferred 401(k) plan
Paid parental leave for all full time employees including 12 weeks paid parental leave for the birthing mother and 6 weeks paid parental leave for the non-birthing parent
Subsidized EV charging and pre-tax commuter benefits
Opportunity to become Lunar shareholders by getting equity in a fast-growing company and participating in our employee stock program

Fulltime

Project Manager, Fiber Engineering and Construction

This position will be part of the Engineering & Construction Fiber Build team. A...

Location

United States , Charlotte

Salary:

Not provided

Brightspeed

Expiration Date

Until further notice

Requirements

10+ years Telecommunication experience
Bachelor’s degree, Engineering degree or equivalent practical work experience
Project Manager Certification
Ability to facility project creation and management in standard PM tools (MS Project, SmartSheets, Confluence, JIRA, Service Now)
Experience with Telcom Network Design systems (IQGeo, GIS, SmallWorld)
Experience with Telcom Facility Record Management tools (O2, BOSS, AMS)
Usability & understanding of data visualization tools (PowerBI, Power Apps)
Vendor & Contract Administration
Usability & understanding of financial systems (Ariba, SAP, Accounts Payable)
Ability to create complex Methods & Procedures

Job Responsibility

Developing and monitoring engineering and construction build plans across various network types
Coordinating & creating work schedules to ensure on time delivery for both internal workforce and contracted vendors
Tracking milestone activities for highly complex projects/programs across multiple lines of business both internal and external
Ensuring compliance requirements are adhered to for all regulatory obligations
Ensuring projects meet network readiness dates within budget allotments via strong vendor performance management
Utilizing Cost Per Premise Modeling during design and revision phases
Drive and facilitate actionable data analysis with partner groups (IT, Business, and Vendors)
Providing technical oversight and support to OSP build and Operations teams
Supporting removal of network build roadblocks associated with permitting, contractual interpretation via internal Brightspeed resource, external vendor resources or government bodies
Collaborating with network leadership and business domain leadership to design and implement future state processes that achieve program goals, and end-to-end process engineering objectives

What we offer

competitive medical, dental, vision, and life insurance
employee assistance program
401K plan with company match
host of voluntary benefits

Fulltime

Senior Manufacturing Test Development Engineer

As a Senior Test Development Engineer, you will work closely with the WHOOP Manu...

Location

United States , Boston

Salary:

130000.00 - 185000.00 USD / Year

Whoop

Expiration Date

Until further notice

Requirements

Bachelor's degree in computer science, electrical engineering, or related technical discipline
4+ years of experience in software development
4+ years of experience in embedded systems testing
Experience in deploying software in a production/manufacturing environment
Knowledge of object-oriented programming languages (e.g., C++, C#), scripting languages (e.g, Python)
Strong knowledge of QA methodologies, tools, and processes
Knowledge of using GIT
Experience of communication protocols such as UART, I2C, SPI, USB, BLE, etc.
Experience communicating with engineering, manufacturing, and external partners both domestically and internationally in a CM/JDM model
Ability to travel domestically and internationally (up to 15%)

Job Responsibility

Develop Automatic Test Equipment (ATE) test program to support manufacturing tests from engineering build to mass production
Writes engineering review proposals and contributes to technical design
Design and implement test/automation software used to qualify new features of embedded systems and firmware during engineering development and mass production
Create and maintain manufacturing test software requirements and specifications
Work with distributed teams across different time zones to achieve successful ATE bring up as well as issue resolution, production yield improvements, test process optimization
Perform root cause analysis, failure review, and data analytics to drive corrective actions for a wide variety of engineering and manufacturing test fixtures and processes
Coordinate parallel path efforts as contingency planning for high-risk milestones
Finds ways to help teammates achieve their goals. Inspires teamwork, can-do attitude, and positive energy
Able to voice concerns in a constructive manner

What we offer

equity
benefits

Fulltime

Test Engineer - Construction

360 Resourcing Solutions

Location:
United Kingdom , Penkhull

Category:
Construction

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test Engineer - Construction

Test Engineer

Construction Engineer

Construction Project Engineer

Project Engineer Highway Construction Management

Construction Engineer

Mechanical Engineer - Test Fixture Designer

Project Manager, Fiber Engineering and Construction

Senior Manufacturing Test Development Engineer

Test Engineer - Construction

360 Resourcing Solutions

Location:United Kingdom , Penkhull

Category:Construction

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Test Engineer - Construction

Test Engineer

Construction Engineer

Construction Project Engineer

Project Engineer Highway Construction Management

Construction Engineer

Mechanical Engineer - Test Fixture Designer

Project Manager, Fiber Engineering and Construction

Senior Manufacturing Test Development Engineer

Location:
United Kingdom , Penkhull

Category:
Construction

Contract Type:
Not provided

Job Posted:
January 05, 2026