Technician Manufacturing, Fill & Pack Job at Baxter (Guayama)

Technician Manufacturing, Fill & Pack

Maintain Fill & Pack equipment in optimal condition to assure normal operation o...

Location

United States of America , Guayama

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

Ability to read and understand English & Spanish
Ability to operate electronic equipment
Capable of operating automatic and semi-automatic equipment
Strong analytical and problem-solving skills
Compressive knowledge of cGMP, FDA and EHS regulations
Computer literate (Word, Excel and Power point)
Must be willing to work rotating shifts, weekends and holidays
Be able to interpret and apply maintenance, repair, inspection and compliance codes and standards
Able to interpret and convert units of measure such as: temperature, pressure flow, area mass, distance, volume and other
Mathematical reasoning: add, subtract, multiply, divide, calculate percentages as well as able to use a calculator or other associated electronic equipment

Job Responsibility

Diagnose, troubleshoot, and repair production line machine to maintain the normal operations of the packaging line
Assist Fill and Pack operators in the performance of minor troubleshooting and adjustment that will increase line efficiency
Provide maintenance and perform software changes on programmable logic controllers installed in the packaging equipment
Train F&P set up operators and mechanics to perform minor troubleshooting and adjustments that will increase line efficiency
Serve as back up to Lead Technician during absence or vacations
Document repairs made to equipment in work orders and perform preventive maintenance o a F&P equipment as per SOP and production specials
Perform manufacturing operations and operate equipment/machine by following standard operating procedures adhering to Good Manufacturing Practices (GMP's) and Good Documentation Practices (GDP's)
Manufacturing Technician must be capable of operate multidisciplinary activities including 100% of the station at packaging lines 100% of clerical activities
Be an active member of the Emergency Response Brigade and attend the required trainings and Medical Surveillance requirements associated with the Brigade

What we offer

Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence
Paid parental leave

Fulltime

Manufacturing Technician - I

This role involves packing various containers filled with chemicals into boxes. ...

Location

United Kingdom , Loughborough

Salary:

13.20 GBP / Hour

Randstad

Expiration Date

July 01, 2026

Requirements

Experience: Years of experience are not essential for the role
Core Skills: Must be fit, healthy, reliable, and motivated
Works safely and adheres to guidelines
Works well within a team environment
Basic Abilities: Strong reading and writing skills, basic computer transaction skills, and the ability to closely follow procedures and work instructions

Job Responsibility

Packing & Filling: Follow works orders to pack and fill multiple styles/sizes of chemical containers using manual and automatic equipment (filling machines, labelers)
Quality & Measurements: Use weighing equipment to check raw materials for accuracy
Verify that batch and chemical code numbers match labels and product containers
Maintain quality records and carry out routine inspection checks
Logistics & Warehousing: Palletize, strap, or stretch-wrap completed packs for safe transfer to the warehouse
Safety & EHS: Follow strict safety guidelines, carry out daily checks, and ensure compliance with manual handling, COSHH, and waste handling protocols
Wear all required PPE and report any unsafe incidents
Continuous Improvement: Perform daily housekeeping duties to maintain 5S standards and actively participate in Kaizen and Total Productive Maintenance events

Fulltime

!

Manufacturing Technician I

We are looking for a motivated and reliable Manufacturing Technician to join our...

Location

United Kingdom , Loughborough

Salary:

24258.00 GBP / Year ▼

Randstad

Expiration Date

July 15, 2026

Requirements

Reliability
Physical Fitness
Attention to Detail
Team Players
Tech-Savvy

Job Responsibility

Packing & Labeling: Accurately pack various chemicals into containers and outer packaging
Equipment Operation: Use manual and automatic filling machines, labellers, and weighing equipment
Quality Control: Match batch numbers and product codes to ensure 100% accuracy
Safety & Maintenance: Follow strict COSHH and manual handling guidelines, perform daily safety checks, and maintain a clean workspace (5S)
Logistics: Palletise completed orders and prepare them for safe transfer to the warehouse

Fulltime

Manufacturing Technician

Diasorin is a global leader in diagnostic solutions, pushing the boundaries of s...

Location

United Kingdom , Dartford

Salary:

Not provided

Diasorin

Expiration Date

Until further notice

Requirements

Science based educated or relevant experience desirable
Knowledge of one or more manufacturing processes
Good interpersonal and communication skills
The ability to adapt to change in priority
Good numeracy skills
Willing to learn new skills to support Manufacturing needs

Job Responsibility

Manufacture and filtration of bulk reagents including adjustments based on performance feedback from the QC department
Preparation of equipment and utensils involved in product manufacture (cleaning and sterilisation)
Preparation of solid phase components used within in vitro diagnostic products (ELISA/CLIA)
Operation of filling lines to produce filled material or supporting technicians with filling runs
Perform routine maintenance and verification of equipment used within production
Participating in the assembly and packing of finished products
To complete all documentation accurately and in a timely manner highlighting issues to line manager as soon as they occur
Use the quality management system to ensure compliance to procedures including supporting line manager in conducting periodic reviews and performing updates where necessary
Comply will all company procedures governing the role including quality documents, HR and EHS policies
Contribute to site approved projects to ensure their timely completion

Fulltime

Principal Engineer

Baxter Healthcare Corporation is seeking a Principal Engineer with the following...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

SR Production Technician, Packing

This is where my hands make life-sustaining products. You are driven by the know...

Location

United States , Marion

Salary:

52000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be least 18 years of age.
Possess or be able to obtain Worksaver Operator Certification and Inspector Certification.
Basic English written and oral communication skills adequate to communicate with other team members.
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings.
Ability to perform basic mathematics.
Proficient in how to use a calculator and measurement tools as well as basic hand tools.
Basic computer skills.
Lifting and carrying up to 50 pounds.
Normal reaching, bending, pushing, pulling, stooping, manual dexterity, and visual acuity required.
Must be able to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance.

Job Responsibility

Assure line is set up with proper materials per the Bill of Material (BOM), verify batch documents are correct per filling schedule and documents are maintained inside appropriate batch folder.
Load and replenish production supplies (i.e. Enhanced Closures, Barcode & Hot Stamp Foil, Bags from Kiefel, Rollstock for Autopouching, Overpouch,stretch wrap, hot melt glue sticks, Sterilizer Trucks, etc.) at a rate consistent with production needs and as needed by use of a powered industrial truck or lift.
Determine staffing requirements to meet the production schedule and adjust staffing accordingly throughout the shift to meet plant goals.
Initiate batch and exception documents as required needed.
Perform production related task per appropriate procedure and verify all entries were documented correctly during your shift. Execute Batch/Code changes as well as sublots when assigned.
Perform required quality checks per appropriate Packing SOP and document results in Assemble Pack or appropriate batch documents.
Perform equipment Pre-Flight checks and /or Daily Walk-Arounds if applicable.
Working with the Production Technician 2 and/or maintenance, monitor all line equipment operations to optimize line performance.
Ensure assigned Preventative Maintenance (PM) task for line equipment is completed on time. If required, support Production Technician 2 and/or Maintenance on departments PM tasks.
Document equipment issues in Virtual Maintenance for production tracking and daily shift notes, is needed.

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

Principal Engineer

Baxter Healthcare Corporation is seeking a Principal Engineer with the following...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Principal Engineer

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Marion

Salary:

143333.00 - 168000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering or a closely related field plus 5 years of related experience
Assess the current state of the facility and existing production equipment and develop a comprehensive project execution and implementation plan for the installation of new IV bag filling, pouching, and packing automatic/robotic equipment, utilizing established project management methodologies
Plan and Manage capital of long-term improvement capital expenditure projects $10M and savings $1M
Execute FDA/MoH regulated Change Management using Trackwise8 Management Systems
Use of Value Stream Mapping and Root Cause Analysis to identify improvement opportunities within the IV bag filling, pouching, and packing production lines. Lead targeted process optimization initiatives focused on increasing operational efficiency, enhancing product quality, and reducing scrap
Site SME for automation equipment for IV bags filling, pouching and packing activities within a production plant
Demonstrated familiarity with GMP requirements and experience operating within a highly regulated, controlled environment
Lead and organize multidisciplinary team activities for Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and pharma qualification protocols IQ and OQ
Demonstrated ability to develop comprehensive project approval documentation and deliver presentations to executive level committees with minimal guidance
Manage and oversee the installation of production line serialization systems to ensure compliance with national and international regulatory standards, including EUFMD, DSCSA, and UDI, required for IV bags

Job Responsibility

Responsible for leading complex automation and control system initiatives within a highly regulated pharmaceutical manufacturing environment
Define the technical vision and provide high‑level architectural guidance for automation systems to ensure alignment with business objectives and regulatory requirements
Evaluate, recommend, and integrate advanced technologies—including robotics, data analytics platforms, and proprietary equipment—to enhance manufacturing performance and reliability
Manage full project lifecycles, including capital requests, design, development, validation, commissioning, and launch of automation systems in GMP‑regulated environments
Identify, assess, and mitigate technical and project risks
manage external vendors and support negotiation processes when necessary
Ensure all automation and control initiatives comply with Good Manufacturing Practices (GMP), FDA regulations, and 21 CFR Part 11 requirements. Learn, understand, and consistently apply rigorous quality standards, Standard Operating Procedures (SOPs), and cGMP throughout all project activities
Supervise and coordinate the work of engineers and/or technicians assigned to project activities
Provide technical guidance, mentorship, and leadership to support troubleshooting, problem‑solving, and skills development across the engineering team

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
medical and dental coverage that start on day one
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Select Country

Technician Manufacturing, Fill & Pack

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Technician Manufacturing, Fill & Pack

Technician Manufacturing, Fill & Pack

Manufacturing Technician - I

Manufacturing Technician I

Manufacturing Technician

Principal Engineer

SR Production Technician, Packing

Principal Engineer

Principal Engineer

Our AI answers in your language