Technician I, Process Job at CommScope (Verna, Goa)

New

O&M Technician I (Night shift)

The O&M Technician I performs a variety of operation and maintenance functions a...

Location

United States , Franklin Township

Salary:

26.00 - 28.00 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

High School Diploma/GED is required
Requires good reading, math, writing, scientific, and verbal communication skills
a mechanical aptitude
and the ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment
Must be able to obtain NJ T1 license within 18 months of hire
Must have and maintain a valid driver’s license with a safe driving record
The ability to perform tasks requiring standing and walking for extended periods of time
The ability to climb stairs, squat, and work with hands extended above head and in front of the body
Must be able to lift up to and carry 50 pounds
Requires close visual and hearing observation to detect non-conformance and machine malfunction

Job Responsibility

Operates equipment manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures
Monitors and observes operating conditions, records observations and data in shift log
Diagnoses basic operational problems and takes corrective action per procedure
Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on machines and related equipment
Reports and documents results of work performed and enters into appropriate database
Promptly reports any operational problems with machines or equipment to Lead or Supervisor
Collects water, wastewater, industrial waste, groundwater, sludge, residuals and/or gas samples according to schedule
Performs field tests (chemical, physical and biological) in order to pace chemical dosages for process and odor control units
Prepares chemical solutions, monitors supplies and recommends reorder
Performs routine lab tests and prepares reports per procedure

What we offer

paid time off policies
health insurance
dental insurance
vision insurance
life insurance
savings accounts
tuition reimbursement
paid volunteering
employer sponsored 401(k) plan
up to 3% Annual Performance Bonus

Fulltime

New

O&M Technician I

Under the direction of Project Management, performs work involving the day-to-da...

Location

United States , Litchfield

Salary:

24.04 USD / Hour

Veolia

Expiration Date

Until further notice

Requirements

High School Diploma/GED is required
Less than 2 years of experience in the water industry or related fields
Strong reading, math, writing, and verbal communication skills
Strong mechanical aptitude and ability to read, interpret, and record data from meters, gauges, scales, panels, computer consoles, and other equipment
Computer skills, knowledge of Windows, Office and/or CMMS
Troubleshooting/problem solving skills
Ability to understand/execute written and oral instructions, read/understand instructions
Must be able to work as a team in a teamwork-oriented environment
Must be safety conscious
The ability to obtain an IL Class C Water Treatment Operator license within 24 months of hire is highly encouraged

Job Responsibility

Performs a variety of basic operational and maintenance tasks relevant to maintaining safe and reliable operations of water treatment facilities and systems ensuring operational compliance with state and federal regulations
Routine cleaning and general housekeeping duties in work and plant areas as assigned, including but not limited to sweeping, dusting, mopping, painting, and cleaning of other process equipment and areas
Ability to understand and carry out written and/or verbal work orders and assignments
Ability to perform simple math calculations with the use of a calculator
Ability to learn and utilize CMMS system to schedule and complete work orders
Ability to properly collect water quality samples, test and maintain collection records
Perform work in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures
Work weekends, holidays, and be on-call on a rotating basis/schedule with fellow operators
Respond to emergencies, work additional hours as required to complete tasks as/and when needed
Assists project and department to develop a culture of focus and engagement at the project to achieve EH&S excellence

What we offer

Paid time off policies
health, dental, vision, and life insurance
retirement plans, savings accounts
tuition reimbursement
paid volunteering

Fulltime

New

Maintenance Technician I

The Maintenance Technician I is a Salaried Non-Exempt position which ensures saf...

Location

United States , Marion

Salary:

46400.00 - 63800.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High school diploma or GED required
Preferred Technical school training
1-2 years of prior maintenance experience on automated manufacturing machines/equipment
Experience with Computerized Maintenance Management System (CMMS). Maximo preferred
Familiar with programmable logic controllers (PLC) systems (Siemens, Allen Bradley, Omron). SCADA/EMS/BMS experience preferred
Experience with motor controls, variable speed/variable frequency drives, servos, stepper motors, high speed packaging equipment, pneumatic systems
Candidate must be capable of reading and working with electrical schematics, mechanical drawings, building drawings, and part diagrams
Working knowledge of photo eyes/sensors, limit switches, proximity sensors, temperature controllers, inkjet printers, and vision systems (Cognex, Keyence preferred)
Experience performing maintenance and troubleshooting of high-speed manufacturing/filling and packaging equipment, including pick-and-place systems, conveyors, pneumatic systems, hydraulic systems, continuous inkjet printing systems
Good written and verbal communication skills (ability to read, write and speak fluent English) and understanding of cGMP regulations. Good procedural writing skills

Job Responsibility

Troubleshoots, repairs, and performs preventative maintenance on medical IV solution, filling and packaging manufacturing equipment, hydraulics, pneumatic systems, motor and machine controls, electrical systems, Robotics and electronics
Use a drawing package, multi-meter and other diagnostic equipment to resolve electrical issues
Resolves issues related to equipment, process, compliance
performs unscheduled maintenance and responds to trouble calls in a timely manner
Performs daily preventative maintenance tasks to ensure equipment is operational
Works in a safe manner always, and is trained in Arc Flash, Lock Out Tag Out, Basic Electrical Safety, Ladder Safety, and other plant programs
Ensure work order system, maintenance, and facility procedures are followed and completed properly, including pre-approvals and signoffs. Follows Good Documentation Practices (GDP) as always outlined by Baxter policies and procedures
Strict adherence to environmental health and safety (EHS) and manufacturing SOP, policies, and procedures to ensure safe and quality products are always produced
Works with EHS to ensure compliance with global requirements
Performs modification, upgrades, and new installation of equipment and machinery

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

New

MK-30 Underwater Target Technician I

Amentum is seeking a MK-30 Underwater Target Electronics Technician I to join ou...

Location

The Bahamas , Andros Island

Salary:

22.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
One (1) year electronics technology experience and two (2) years of experience with Microsoft Office Suite products, with an emphasis on word processing
Experience with multimeters, AFG’s and oscilloscopes required
Must be able to lift, push, pull or carry 50 lbs
Must be able to reside in remote work location with limited medical facilities
Valid U.S. passport and driver’s license are required
Must be able to obtain and maintain a Secret U.S. Government Clearance. Note: U.S. Citizenship is required to obtain a Secret Clearance.

Job Responsibility

Perform detailed testing procedures to diagnose causes of equipment malfunction
Disassemble components and trace circuit continuity through stages of equipment
Repair circuit wiring and replace faulty components as required
Under supervision, perform authorized modifications, preventative maintenance, and final testing of equipment
Install tracking systems in direct accord with NAVSEA specifications and guidelines
Maintain a controlled supply area for providing needed assets to the MK 30 Program within the Range Support Shop - MK 30 Targets Program
Troubleshoot and repair a variety of electronic systems
Perform other job-related duties as assigned or requested

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

New

Production Technician I

This is where my hands make life-sustaining products. You are driven by the know...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Complete batch/code changes, tank changes, as well as sub lots as needed
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine's performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

New

Maintenance Technician I

The Maintenance Technician I is a Salaried Non-Exempt position which ensures saf...

Location

United States , Marion

Salary:

46400.00 - 63800.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High school diploma or GED required
Preferred Technical school training
1-2 years of prior maintenance experience on automated manufacturing machines/equipment
Experience with Computerized Maintenance Management System (CMMS). Maximo preferred
Familiar with programmable logic controllers (PLC) systems (Siemens, Allen Bradley, Omron). SCADA/EMS/BMS experience preferred
Experience with motor controls, variable speed/variable frequency drives, servos, stepper motors, high speed packaging equipment, pneumatic systems
Candidate must be capable of reading and working with electrical schematics, mechanical drawings, building drawings, and part diagrams
Working knowledge of photo eyes/sensors, limit switches, proximity sensors, temperature controllers, inkjet printers, and vision systems (Cognex, Keyence preferred)
Experience performing maintenance and troubleshooting of high-speed manufacturing/filling and packaging equipment, including pick-and-place systems, conveyors, pneumatic systems, hydraulic systems, continuous inkjet printing systems
Good written and verbal communication skills (ability to read, write and speak fluent English) and understanding of cGMP regulations. Good procedural writing skills

Job Responsibility

Troubleshoots, repairs, and performs preventative maintenance on medical IV solution, filling and packaging manufacturing equipment, hydraulics, pneumatic systems, motor and machine controls, electrical systems, Robotics and electronics
Use a drawing package, multi-meter and other diagnostic equipment to resolve electrical issues
Resolves issues related to equipment, process, compliance
performs unscheduled maintenance and responds to trouble calls in a timely manner
Performs daily preventative maintenance tasks to ensure equipment is operational
Works in a safe manner always, and is trained in Arc Flash, Lock Out Tag Out, Basic Electrical Safety, Ladder Safety, and other plant programs
Ensure work order system, maintenance, and facility procedures are followed and completed properly, including pre-approvals and signoffs. Follows Good Documentation Practices (GDP) as always outlined by Baxter policies and procedures. Document all work in CMMS as required
Strict adherence to environmental health and safety (EHS) and manufacturing SOP, policies, and procedures to ensure safe and quality products are always produced
Works with EHS to ensure compliance with global requirements
Performs modification, upgrades, and new installation of equipment and machinery

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Fulltime

New

Production Technician I

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years old
Must have basic English, written and oral, communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions, read and comprehend written work instructions – including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills

Job Responsibility

Operate, monitor, maintain and make adjustments as necessary to machinery in their assigned manufacturing area
Load and replenish production supplies at a rate consistent with production needs
Perform routine and preventative maintenance such as adjustments, replacement of machine parts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Document required information on manufacturing logs and/or POMS system and Maximo
Investigate, identify and correct any inefficiency in machine performance
Identify process improvements on existing process and equipment
May participate in Continuous Improvement, Project and Safety Teams, Lean Initiatives, Value Stream led activities and defect prevention programs
Communicate with outgoing shift personnel to obtain information regarding any problems with machines, materials, etc. encountered during the previous shift and review point of use tool inventory
Perform and document scheduled cleaning activities

What we offer

Medical and dental coverage starting day one
Basic life, accident, short-term and long-term disability insurance
Business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP) with company matching
Flexible Spending Accounts
Educational assistance programs
Paid holidays
Paid time off ranging from 20 to 35 days based on length of service
Family and medical leaves of absence

Fulltime

New

Maintenance Technician I

Location

United States , Marion

Salary:

46400.00 - 63800.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High school diploma or GED required
Preferred Technical school training
1-2 years of prior maintenance experience on automated manufacturing machines/equipment
Experience with Computerized Maintenance Management System (CMMS)
Maximo preferred
Familiar with programmable logic controllers (PLC) systems (Siemens, Allen Bradley, Omron)
SCADA/EMS/BMS experience preferred
Experience with motor controls, variable speed/variable frequency drives, servos, stepper motors, high speed packaging equipment, pneumatic systems
Candidate must be capable of reading and working with electrical schematics, mechanical drawings, building drawings, and part diagrams
Working knowledge of photo eyes/sensors, limit switches, proximity sensors, temperature controllers, inkjet printers, and vision systems (Cognex, Keyence preferred)

Job Responsibility

Troubleshoots, repairs, and performs preventative maintenance on medical IV solution, filling and packaging manufacturing equipment, hydraulics, pneumatic systems, motor and machine controls, electrical systems, Robotics and electronics
Use a drawing package, multi-meter and other diagnostic equipment to resolve electrical issues
Resolves issues related to equipment, process, compliance
performs unscheduled maintenance and responds to trouble calls in a timely manner
Performs daily preventative maintenance tasks to ensure equipment is operational
Works in a safe manner always, and is trained in Arc Flash, Lock Out Tag Out, Basic Electrical Safety, Ladder Safety, and other plant programs
Ensure work order system, maintenance, and facility procedures are followed and completed properly, including pre-approvals and signoffs
Follows Good Documentation Practices (GDP) as always outlined by Baxter policies and procedures
Document all work in CMMS as required
Strict adherence to environmental health and safety (EHS) and manufacturing SOP, policies, and procedures to ensure safe and quality products are always produced

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Basic life, accident, short-term and long-term disability insurance
Business travel accident insurance
Flexible Spending Accounts

Fulltime

Select Country

Technician I, Process

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?