Technician 3, Production Test Job at Sandisk (Batu Kawan)

Production Test Technician

We are looking for a Test Technician to support the testing, verification, and v...

Location

United Kingdom , Colchester

Salary:

28000.00 - 31000.00 GBP / Year

Cooper Lomaz

Expiration Date

Until further notice

Requirements

HNC, BTEC Level 3, or similar qualification in Electronics or Electrical Engineering
Some experience in electronic testing (manufacturing or R&D preferred)
Good understanding of electronic test methods and equipment
Ability to test and fault-find to component level
Awareness of standards such as ISO 9001 and IPC
Strong problem-solving skills and attention to detail
Able to work effectively in a fast-paced, team-based environment
Good communication skills and strong organisational habits

Job Responsibility

Follow established electronic test plans and procedures
Work with test systems, including both hardware and software
Improve the accuracy and reliability of test results through continuous improvement
Build a solid understanding of the company’s products and systems
Produce clear fault reports to support ongoing product improvements
Contribute to ATE test program development for new products
Fault-find down to component level
Carry out clean, accurate repairs on electronic assemblies
Use new test methods, fixtures, and cables as required

Fulltime

Test Technician

APCON is seeking a Test Technician to join our production team. The Test Technic...

Location

United States , Wilsonville

Salary:

Not provided

APCON

Expiration Date

Until further notice

Requirements

3–5+ years testing electronics in a production environment
Proficiency in board-level diagnostics and PC-based test software
Must have understanding of networking concepts, protocols (like TCP/IP, Ethernet), and network devices (routers, switches, etc.)
A thorough understanding of communications networks (LANs, Internet, optical networks, etc.), fiber optic and copper principles (including transceivers, cable, and traffic), and cabling systems is essential
High school diploma or equivalent combination of education and experience
Strong attention to detail and multitasking ability
Clear and effective communication skills
Willingness to work overtime as required

Job Responsibility

Perform functional and operational tests on circuit boards and chassis in a fast-paced production environment
Configure and test end products to meet customer and company specifications and requirements
Configure test equipment to meet multiple testing requirements based on product and customer specifications
Evaluate returned products for failures
Maintain accurate documentation of product test results and update troubleshooting logs
Support other production tasks as directed by management

What we offer

Medical, dental, and vision insurance
Company-paid short and long-term disability
Flexible spending accounts
Generous PTO program
401(K) Retirement Savings Plan with company match
Professional development program
Collaborative and innovative environment
On-site exercise facility

Fulltime

Senior Test Technician

The Senior Test Technician is responsible for conducting prescribed tests on tec...

Location

United States , Wilsonville

Salary:

Not provided

APCON

Expiration Date

Until further notice

Requirements

Experience performing functional test and diagnostics using custom PC based test equipment and software
Working knowledge of MS Office applications (Excel, Word, Outlook)
Detail oriented with the ability to multi-task to meet multiple deadlines
Strong verbal and written communication skills
Ability to work over time when needed
Maintain safe working practices and comply with safety and quality standards
Associate degree in electronic hardware systems engineering or equivalent from the military or technical school preferred
Minimum of 3 years of electronic technician experience, including troubleshooting to the component level, in a production environment

Job Responsibility

Performs functional and operational tests on circuit boards and chassis in a fast-paced production environment
Troubleshoot and repair electronic circuit boards and systems down to the component level
Support hardware validation and verification activities during development and production phases
Interpret schematics PCP and Layouts, to diagnosed failures accurately
Troubleshoot products using oscilloscopes and digital volt meters
Configures and tests end products to meet customer and company specifications and requirements
Configures test equipment to meet multiple testing requirements based on product and customer specifications
Evaluates returned products for failures
Maintains accurate documentation of product test results and updates troubleshooting logs

What we offer

Medical, dental, and vision insurance
Company-paid short and long-term disability
Flexible spending accounts
Generous PTO program
401(K) Retirement Savings Plan with company match
Professional development program
Collaborative and innovative environment
On-site exercise facility

Fulltime

Technician 3, Manufacturing Equipment Maintenance

The Technician 3, Equipment Maintenance position is a critical role within our o...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Certificate / Diploma in Mechanical/ Electronics/ Mechatronics
Proficient at troubleshooting electrical, mechanical, pneumatic, and PC software/hardware related issues
Ability to use schematics, hand tools, electrical gauges and common test equipment for calibration, diagnosis and repair of equipment
Ability to understand PLC system
High level attention to detail with methodical approach to troubleshooting and project management
Excellent verbal/written communication skills with the ability to effectively communicate with peers, engineering, and managers
Self-motivator
ability to work independently under general guidance and direction
Knowledge in Basic Troubleshooting Flow (Electrical & Mechanical)
Knowledge in Electric / Electronic Component

Job Responsibility

Conduct comprehensive electrical and mechanical troubleshooting to identify and resolve issues in non-functioning equipment crucial to backend processes
Provide expert manufacturing and equipment support in a dynamic, high-volume manufacturing environment characterized by rapid technological advancements
Meticulously dismantle, adjust, repair, and reassemble equipment in strict accordance with schematics, repair manuals, and precise specifications
Execute rigorous preventive maintenance protocols, perform complex repairs, and conduct in-depth troubleshooting diagnoses on production equipment to ensure maximum operational efficiency
Demonstrate advanced problem-solving skills to address non-standard issues, operate with minimal supervision, and adapt swiftly to shifting priorities in a fast-paced industrial setting
Exhibit a high degree of self-motivation and initiative, effectively managing individual responsibilities while actively contributing to team objectives
Collaborate closely with the Engineering department to facilitate new equipment installations and drive continuous improvement initiatives

Fulltime

Engineering Technician

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

45.00 - 70.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

A minimum of 3+ years of experience working with complex systems
Highly self-motivated and proactive, with the ability to work independently while maintaining focus in dynamic environments and a passion for overcoming technical challenges
Extensive experience in full system architecture diagnostics, including the development and execution of organized, methodical diagnostic processes to identify and resolve issues efficiently
Strong capability to read and follow detailed assembly documentation, identifying and reporting any errors or inconsistencies for continuous improvement
Proficiency in the use of a wide range of general hand tools and technical equipment required for assembly and diagnostics
Exceptional organizational and time management skills, with strong attention to detail to ensure accuracy and quality across tasks and projects
Ability to remove and replace components up to 50lbs

Job Responsibility

Perform rigorous testing of subsystems to verify compliance with established specifications and performance standards, and adapt testing procedures where specifications are not yet fully defined
Identify, troubleshoot, and resolve issues or discrepancies encountered during testing
Develop and implement new testing procedures
Automate testing processes and integrate automation systems to streamline workflow and increase productivity
Ensure all test equipment is properly maintained and in optimal working condition
Contribute to continuous improvement efforts aimed at enhancing testing processes and overall product quality
Use JIRA, Google Sheets, Google Docs, Google Slides, and email for effective communication, documentation, and reporting
Work efficiently under tight deadlines, adapting to changing priorities when necessary

Fulltime

Instrument Test Technician

Conducts production testing of assembled flow cytometers and related medical dev...

Location

United States , San Jose

Salary:

26.00 - 30.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

3+ years related experience in a high tech, manufacturing environment
Experience working in a medical device manufacturing organization
Experience testing and troubleshooting: laser based optical systems, fluidic systems, digital and analog circuitry
Ability to effectively communicate information and respond to questions both verbally and in writing
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
Good mechanical aptitude, dexterity and hand/eye coordination. Must be able to reach, bend and lift 35 lbs on a daily basis
Experienced in the use of: DVM’s, Oscilloscope and general test equipment
Experienced PC or MAC user, familiar with: Word, Excel, Windows and/or MAC OS
Must be willing to be trained in other areas of production where the skill level requirements may be lower

Job Responsibility

Performs instrument optimization functions after final assembly: laser alignment, pressure adjustments, electrical adjustments, etc.
Performs final production testing and inspection to ensure products meet performance specifications and standards
Analyzes test results on defective units to determine root cause of failure
Replaces or repairs defective components or assemblies, processes appropriate paperwork, may return unit to assembly for repair
Compares test results with specifications and records test data and plots test results. Generates required documentation to complete the Device History Record (DHR)
Analyzes test results on defective units to determine root cause of failure. Frequently requires engineering support to resolve complex and unique problems
Must be able to read and understand: detailed test instructions, assembly instructions, work orders, test results, Bills of Materials, Standard Operation Procedures, and all other documentation used to control our products and processes
Confers with engineers, technicians, production personnel, and others regarding testing procedures and results and to resolve problems. Determines, develops and documents troubleshooting techniques
Expected to provide feedback on production and test methods, product design issues, continuously strives to improve product quality and operational efficiency
Will provide support to project teams whose objectives may be: quality improvement, cost reduction, cycle time reduction, reliability improvement, increase operational efficiency, or new product introduction

Fulltime

Instrument Test Technician

Conducts production testing of assembled flow cytometers and related medical dev...

Location

United States , San Jose

Salary:

27.00 - 30.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Min educational requirement should be AS in electronics
Some experience in Testing mechanicals (i.e. electronics, lasers)
Some experience in manufacturing work setting
Requires an Associate's degree (A.S.) or equivalent from two-year college or technical school
3+ years related experience in a high tech, manufacturing environment
Ability to effectively communicate information and respond to questions both verbally and in writing
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
Good mechanical aptitude, dexterity and hand/eye coordination. Must be able to reach, bend and lift 35 lbs on a daily basis
Experienced in the use of: DVM’s, Oscilloscope and general test equipment

Job Responsibility

Conducts production testing of assembled flow cytometers and related medical device products
May integrate systems and conduct a variety of electronic, mechanical, optical, fluidic and electromechanical activities on systems, subassemblies, and parts to ensure unit functions according to specifications
Will be expected to perform system level and subassembly level troubleshooting to determine root cause, and implement correction of assembly or material defects
Responsible for producing quality products on schedule
Performs instrument optimization functions after final assembly: laser alignment, pressure adjustments, electrical adjustments, etc.
Performs final production testing and inspection to ensure products meet performance specifications and standards
Analyzes test results on defective units to determine root cause of failure
Replaces or repairs defective components or assemblies, processes appropriate paperwork, may return unit to assembly for repair
Compares test results with specifications and records test data and plots test results
Generates required documentation to complete the Device History Record (DHR)

Fulltime

Production Test Technician 3

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutio...

Location

Mexico , Ixtlahuacán de los Membrillos

Salary:

Not provided

Sanmina

Expiration Date

Until further notice

Requirements

Technician or Electronics Engineer or related
Minimum 2 to 4 years of related experience in the electronics industry as a diagnostic / test technician or similar
Basic English
Basic Knowledge of Programming Labview, TestStand, Programming in C
Computer Architecture
Hardware management
Knowledge in general electrotechnology, RF, Optical circuits and schemes
Multimeter Handling, Oscilloscope, Signal Analyzer

Technician 3, Production Test

Sandisk

Location:
Malaysia , Batu Kawan

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Technician 3, Production Test

Production Test Technician

Test Technician

Senior Test Technician

Technician 3, Manufacturing Equipment Maintenance

Engineering Technician

Instrument Test Technician

Instrument Test Technician

Production Test Technician 3

Technician 3, Production Test

Sandisk

Location:Malaysia , Batu Kawan

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 13, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Technician 3, Production Test

Production Test Technician

Test Technician

Senior Test Technician

Technician 3, Manufacturing Equipment Maintenance

Engineering Technician

Instrument Test Technician

Instrument Test Technician

Production Test Technician 3

Location:
Malaysia , Batu Kawan

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 13, 2026