Technical Manager (Under Ground Cabling) Job at Morgan Sindall Plc (Inverness)

New

Data Center Technician

As a Data Center Technician (DCT), you will develop an understanding of standard...

Location

United States , Wenatchee

Salary:

23.65 - 37.07 USD / Hour

Microsoft Corporation

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent and basic knowledge of computer hardware and components OR equivalent experience
Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.

Job Responsibility

Develop an understanding of standard processes and procedures for preparing, installing, performing diagnostics, troubleshooting, replacing, and/or decommissioning equipment
Receives guidance and supervision to develop an understanding of standard processes and procedures for preparing, installing, performing diagnostics, troubleshooting, replacing, and/or decommissioning IT datacenter technology(ies) and equipment
Reviews Process Change Notifications (PCNs) and develops an understanding of the impact to work execution
Complies with Data Center business unit policies, procedures, and deadlines
Completes assigned tickets efficiently and in alignment with relevant Key Performance Indicators (KPIs)
Prepares, stages, sets up, and performs basic startups and shutdowns for hardware
Learns about post-execution verification of grounding, staging, labeling, and cabling
Performs basic diagnostics and troubleshooting
Follows procedures to immediately communicate, report, and escalate data center technical or safety related incidents
Directly performs decommissions, simple changes and refreshes of infrastructure cabling, network, storage, and server equipment

What we offer

Benefits and other compensation
Microsoft Cloud background check upon hire/transfer and every two years thereafter

Fulltime

New

Mv/lv Electrical Engineering Project Manager

The MV/LV Electrical Engineering Project Manager acts on behalf of the Engineeri...

Location

United States , Houston

Salary:

Not provided

EDP

Expiration Date

June 30, 2026

Requirements

Bachelor's degree in Electrical Engineering
7+ years of design and engineering experience
1 – 2 years of engineering project management experience
Utility-scale renewable experience preferred
Ability to manage the work of third party consultants and service contracts
Professional Engineering (PE) licensure
Experience supporting projects through development, permitting, engineering, procurement, construction, commissioning, and operations.
Experience with Microsoft Project, Planner, Teams, Outlook, and SharePoint.
Experience with Procore and Terabase platforms.
Experience developing Power BI dashboards and performance reporting.

Job Responsibility

Act as a subject matter expert regarding medium and low voltage, AC and DC systems design for wind, solar, and battery storage facilties
Ensure MV/LV electrical design complies with all EDPR, ISO, utility, regional electrical entity, environmental, health & safety, project local authority, and industry code and standard requirements
Design deliverables include collection system design drawings for wind, solar, and battery storage plants, short circuit study, reactive power and load flow study, grounding study, loss study, cable ampacity study, DC arc flash study, power plant controller and SCADA rack design, inverter settings, special plant modelling and system tuning analyses
Drive design innovation and optimization to ensure reduction in overall project costs to maximize power purchase agreement award potential
Direct and manage engineering consultants directly, or through an EPC contractor, to insure all design deliverables are provided in a timely manner to maintain project schedule
Drive and coordinate project planning and engineering activities with internal clients including Construction, Operations, Development, Environmental, Estimating, Energy Assessment, Health & Safety, Procurement, Legal, and Central Technical Direction to facilitate interdepartmental relations
Attend monthly project construction meetings to maintain current knowledge of project status and to provide support and to coordinate with site team to resolve critical and time-sensitive construction-related electrical issues
Collaborate with Development Engineering team with preliminary internal engineering needed to support the Development pipeline and to ensure a smooth EPC contract handoff.
Coordinate with procurement team to procure project equipment by creating datasheets, reviewing technical proposals and equipment drawings, and attend equipment factory acceptance tests as needed
Support with periodic reviews and modifications of internal engineering design guidelines to maintain and capture the best practices and lessons learned into project designs. Drive accountability across internal and external stakeholders to achieve project objectives.

What we offer

Empower our employees through a positive and innovative work environment that promotes collaboration and agile decision-making
Respect and value each person, providing a flexible, healthy, and inclusive workplace with a range of attractive benefits
Provide a meaningful work experience and prepare our people for future challenges through different opportunities for development and internal mobility

Fulltime

!

Network Engineer, SME

This Network Engineer will provide advanced technical support for the architectu...

Location

United States , Hickam

Salary:

125000.00 - 145000.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s degree in network engineering, information systems, or related discipline from an accredited institution
Minimum of 8+ years of senior-level network engineering experience designing and implementing secure, scalable DoD networks
Technical expertise in: Network architecture, routing protocols, firewall policy, QoS
VMware, Microsoft Teams, VoIP/Unified Comms, Windows Server
Cloud-enablement strategies and cross-domain solutions
Proven track record of designing and implementing secure, scalable DoD enterprise networks (classified and unclassified)
Advanced technical expertise in VMware, VOIP phones, Microsoft Teams, and Windows Server systems
Expertise with network architecture, firewall policy, routing protocols, QoS, Cloud-enablement strategies, and cross-domain solutions
Experience performing Tier 3 O&M support, configuration, and engineering for large-scale military networks
Deep knowledge of DoD architecture frameworks, RMF, and PACAF-specific mission demands

Job Responsibility

Provide Tier 3 network engineering support and troubleshooting for O&M operations across PACAF networks (NIPR/SIPR/Coalition)
Support SDP development in coordination with the lead Network Architect and A6 stakeholders
Support implementation and sustainment of routing, switching, segmentation, firewalls, and QoS configurations
Conduct change management planning, including technical implementation procedures and risk assessments
Execute network upgrades and integration of hardware/software solutions
Perform diagnostics for complex network service issues
Ensure RMF-aligned security integration across all changes
Coordinate with PACAF/A6 and stakeholders for validation
Survey and assess facilities for potential upgrades
Other duties as assigned

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Electrical QAQC

Airswift is seeking a highly skilled and detail-oriented QA/QC Electrical Inspec...

Location

United States , Fort Stockton

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Associate degree in electrical engineering, construction management, project management, or equivalent technical field
Must have electrical onshore wind site experience
Strong understanding of electrical systems in wind farms, including proper voltage handling, electrical safety, grounding requirements, and commissioning processes
Familiarity with electrical codes, industry standards, and best practices for high-voltage and medium-voltage systems
Minimum 5 years of electrical QA/QC experience in onshore wind and at least 8 years of overall electrical or construction QA/QC experience
Proficiency with Microsoft Office tools, CPM scheduling software, and Adobe Acrobat
Strong communication, leadership, and organizational skills
U.S. work authorization and ability to work on-site at project locations

Job Responsibility

Implement and manage the electrical QA/QC plan and enforce all electrical safety and HSE requirements
Conduct electrical inspections across wind farm systems, including medium-voltage and high-voltage components, ensuring proper voltage management and safe installation practices
Verify compliance with electrical codes, standards, engineering specifications, and onshore wind electrical requirements
Review contractor electrical documentation and confirm that electrical completion packages meet contractual and technical standards
Prepare and maintain electrical QA/QC reports, test records, and as-built documentation
track and resolve electrical nonconformities
Support updates to internal electrical standards, procedures, and quality policies
Collaborate with Construction, Procurement, electrical engineers, and third-party inspectors to verify electrical deliverables and equipment specifications
Participate in project and commissioning meetings to provide electrical technical support and quality updates
Ensure proper installation, testing, and verification of wind farm electrical systems, including cables, transformers, switchgear, grounding, and collection systems

Electrical/Mechanical Integration Field Engineer

Amentum is seeking a motivated and technically capable Electrical/Mechanical Int...

Location

United States , China Lake

Salary:

75000.00 - 108000.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s degree in a STEM discipline preferred, with emphasis in Electrical Engineering, Electrical Engineering Technology, Systems Engineering, Mechanical Engineering, Physics, Applied Science, or a related technical field. Equivalent hands-on technical experience may be considered in lieu of degree
Minimum 2 years of hands-on field engineering, electrical troubleshooting, instrumentation, test, maintenance, installation, or hardware-integration experience in a relevant technical environment
Must be able to obtain and maintain a US Government Secret Clearance. Please note US Citizenship is required to obtain a Secret Clearance
Demonstrated experience troubleshooting electrical systems, low-voltage circuits, wiring harnesses, sensors, connectors, signal paths, grounding issues, continuity faults, intermittent failures, or instrumentation anomalies
Demonstrated ability to support hands-on mechanical integration tasks such as equipment installation, sensor mounting, bracket installation, enclosure installation, cable routing, hardware fit checks, and field modification support
Ability to read and interpret wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, technical specifications, and field work instructions
Proficiency with standard electrical test and measurement equipment, including multimeters, oscilloscopes, continuity testers, signal analyzers, data acquisition tools, or similar equipment
Working knowledge of low-voltage electrical systems, sensor interfaces, signal wiring, connectors, cable harnesses, termination practices, and basic fault-isolation techniques
Working familiarity with mechanical hardware installation practices, including fasteners, brackets, mounts, access constraints, cable management, strain relief, alignment, fit checks, and field redline documentation
Ability to document troubleshooting steps, field observations, discrepancies, test results, corrective actions, as-built conditions, and engineering recommendations clearly and accurately

Job Responsibility

Perform hands-on electrical installation, maintenance, troubleshooting, and repair of low-voltage systems, sensors, wiring harnesses, connectors, instrumentation, and associated field hardware
Support mechanical installation and integration activities involving brackets, panels, enclosures, equipment mounts, sensor mounts, cable supports, conduit, raceways, junction boxes, and related hardware
Interpret and work from wiring diagrams, electrical schematics, harness drawings, mechanical drawings, interface drawings, installation drawings, and field work instructions to support installation, verification, and fault isolation
Conduct electrical and mechanical inspections to verify that installed hardware conforms to design intent, drawing requirements, interface requirements, safety standards, and field installation constraints
Troubleshoot complex low-voltage circuits, signal paths, sensor networks, grounding issues, connector issues, intermittent faults, and instrumentation anomalies using appropriate test equipment including multimeters, oscilloscopes, continuity testers, signal analyzers, and data acquisition tools
Assist with fit checks, alignment checks, hardware walkdowns, cable-routing assessments, connector-access evaluations, and field verification of mechanical and electrical interfaces
Identify and resolve electrical, mechanical, and integration-related issues in the field using sound engineering judgment and disciplined problem-solving methodology
Document field observations, discrepancies, corrective actions, redlines, as-built conditions, test results, and recommended engineering updates accurately and thoroughly in accordance with program requirements
Participate in the development, review, and approval of electrical schematics, wiring diagrams, harness drawings, mechanical installation drawings, interface drawings, and technical specifications
Support design change processes by evaluating proposed electrical and mechanical modifications for technical feasibility, fit, form, function, signal integrity, safety, maintainability, and compliance with applicable standards

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Data Center Technician

As a Microsoft Data Center Technician (DCT) (Locations: Lithia Springs, GA; Palm...

Location

United States , Lithia Springs

Salary:

23.65 - 48.03 USD / Hour

Microsoft Corporation

Expiration Date

Until further notice

Requirements

High school diploma, GED, or equivalent and basic knowledge of computer hardware and components OR equivalent experience
Ability to meet Microsoft, customer and/or government security screening requirements are required for this role
These requirements include, but are not limited to the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter
High school diploma, GED, or equivalent and basic knowledge of computer hardware and components AND 3+ year(s) experience supporting IT equipment or related technology OR equivalent experience

Job Responsibility

Receives guidance and supervision to develop an understanding of standard processes and procedures for preparing, installing, performing diagnostics, troubleshooting, replacing, and/or decommissioning IT datacenter technology(ies) and equipment
Develops and acquires a fundamental understanding of the functions of, and interactions between cabling infrastructure, network, server, and storage equipment
Complies with Data Center business unit policies, procedures, and deadlines with guidance from experienced technicians and/or direct-line management
Escalates issues related to compliance or operational assurance activities to direct-line management
Completes assigned tickets efficiently and in alignment with relevant Key Performance Indicators (KPIs) per task type with guidance from experienced technicians
Seeks guidance from more experienced technicians on challenging or complex tickets
Reviews Process Change Notifications (PCNs) and develops an understanding of the impact to work execution and awareness to changes within their area of work and/or the work of others
Asks questions when they do not have required information and may provide feedback on changes to processes to experienced technicians and/or direct-line management
Participates in daily safety briefings
Completes required Environmental & Health Safety (EHS) training, complies with safety procedures (e.g., equipment use, lifting, electrical hazards, ladder/rolling stair use), completes required Task Hazard Analysis (THAs), and uses appropriate equipment and Personal Protective Equipment (PPE) for assigned tasks

Fulltime

Senior Electrical Substation Project Engineering Manager 2

With the growth of the Grid Solutions Integration - North America Region busines...

Location

United States , Boston

Salary:

144900.00 - 241200.00 USD / Year

The Muse

Expiration Date

July 24, 2026

Requirements

Bachelor's Degree in Engineering from an accredited university
Minimum of 12 years of experience in industrial or utility High Voltage (+138kV) substation design, or a Master's Degree in Electrical Engineering with +10 years of relevant experience
Ability and willingness to travel up to 20% (including international), in compliance with company travel and tax policies

Job Responsibility

Lead and coordinate all technical aspects of AC power substation projects. Also able to self-perform the design
Serve as the primary technical lead, responsible for scheduling, compliance to standards and specifications, value engineering, design review planning, and ensuring quality assurance and control
Develop and oversee key design deliverables, including: Power single-line diagrams
General substation arrangement drawings (plan & substation layout, elevation, grounding, conduit/trench, cable routing, detail drawings and control buildings layouts)
High-voltage bus, structures, equipment, and detailed arrangements
Act as the single point of contact for all technical matters between customers, vendors, project managers, and engineering teams
Accountable for directing and supporting engineers and designers to meet technical specifications, budget constraints, and project timelines. This includes sub-contracted resources
Drive cross-discipline coordination to deliver fully integrated substation solutions
Review and contribute to proposal deliverables, including: Conceptual engineering
Proposal documentation (e.g., BOMs, technical specifications)

What we offer

Medical, dental, vision, and prescription drug coverage
Access to Health Coach from GE Vernova, a 24/7 nurse-based resource
Access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services
Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions
Access to Fidelity resources and financial planning consultants
Tuition assistance
Adoption assistance
Paid parental leave
Disability benefits
Life insurance

Fulltime

Substation Electrical Engineer II

Bowman has an opportunity for a Substation Electrical Engineer II, Substation to...

Location

United States

Salary:

85000.00 - 115000.00 USD / Year

Bowman

Expiration Date

Until further notice

Requirements

Bachelor's degree in electrical Engineering, Engineering Technology, or related field
equivalent experience may be considered
Engineer‑in‑Training (EIT) preferred
progression toward Professional Engineer (PE) licensure encouraged
Three or more (3+) of progressive CAD/drafting experience, with significant substation or utility experience
Expert proficiency in AutoCAD, MicroStation, or equivalent CAD platforms
Working knowledge of substation equipment, layouts, grounding, and construction methods
Experience with utility drafting standards and document control systems
Proficiency in Microsoft Office applications

Job Responsibility

Provides engineering support, and technical expertise for substation engineering projects
This role independently produces, modifies, and reviews complex substation drawings, ensures compliance with company standards, and serves as a technical resource to support the safe and reliable delivery of substation infrastructures
Serve as a technical resource for substation design, CAD standards, tools, and best practices
Collaborate closely with substation engineers and project managers to translate engineering concepts into accurate, constructible drawings
Support continuous improvement of drafting methods, templates, and workflows
Produce and maintain detailed substation drawings for new construction, expansions, and retrofit projects
Ensure drawing packages comply with company drafting standards, engineering requirements, and regulatory guidelines
Coordinate drawing deliverables with engineering, protection & control, civil/structural, and construction teams
Support project schedules by managing multiple deliverables and prioritizing work effectively
Participate in design reviews and incorporate comments accurately and efficiently

What we offer

Medical, dental, vision, life, and disability insurance
401(k) retirement savings plan with company match
Paid time off, sick leave, and paid holidays
Tuition reimbursement and professional development support
Discretionary bonuses and other performance-based incentives
Employee Assistance Program (EAP), wellness initiatives, and employee discounts

Fulltime

Select Country

Technical Manager (Under Ground Cabling)

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?