Technical Inspector, Aircraft Job at Amentum (Fort Polk)

Technical Inspector Aircraft

The Aircraft (Rotary Wing) Technical Inspector is responsible for ensuring that ...

Location

United States , Fort Polk

Salary:

38.37 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Five (5) years of recent applicable aircraft maintenance experience
One (1) year experience performing Technical Inspections on rotary wing aircraft
A valid and up-to-date (FAA) Airframe and Powerplant (A&P) license
A Valid FAA Inspection Authorization (IA). If no IA, shall have a minimum of five (5) years as an inspector on helicopters
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location
Valid Driver's License
Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements
Efficient in record keeping and preparation of reports
capable of reviewing other people's work and determining accuracy and conformity to standards
Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records

Job Responsibility

Responsible for ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation
Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty
Plans, conducts, and supervises aircraft technical inspections
Develops and implements quality control and ground safety programs to ensure compliance with contract specifications
Evaluates personnel, including verification of skills, training and experience
Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities
Examines parts and components for conformance to design specification to determine serviceability
serviceable, unserviceable-reparable, unserviceable-non reparable, affixing completed appropriate form/tag for disposition
return to stock, route to appropriate shop for repair and/or turn-in. Form/tag will contain comment relative to evaluation and be stamped by the Inspector
Monitors timeliness and applicability of maintenance technical data and technical library

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Aircraft Technical Inspector (CH47)

Aircraft Technical Inspector (CH47) - Buehring, Kuwait On Site Kuwait City, Al A...

Location

Kuwait , Kuwait City

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent required
Shall have five years of recent applicable aircraft maintenance experience
Shall have at least one-year experience inspecting CH47 aircraft assigned
U.S. military technical school or specialized training course is desired, certification of education level is required
Shall possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P)
If no A&P, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting
Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting
Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 2 plus year validity on expiration date of passport at the time of hiring
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location
Must be able to pass Army MOD Medical for deployment

Job Responsibility

Maintaining the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment
Inspect, remove, install, repair, replace, modify, disassemble, reassemble, and calibrate complex aircraft mechanical and electromechanical systems
Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests
Approve or reject work accomplished by field team members
Review and approve locally developed procedures and solutions to complex repair situations
Perform analysis of defects and interprets quality control rejection and failure trends
Monitor safety, training, and certification requirements
Perform daily work site Safety Inspections and Foreign Object Damage Inspections
Monitor tool control programs, inspects, and maintains records to ensure that measuring and test equipment meets calibration requirements
Maintain Quality, Safety, Training and Certification Records

Fulltime

Aircraft (Rotary Wing) Technical Inspector

The Aircraft (Rotary Wing) Technical Inspector is responsible for ensuring that ...

Location

United States , Fort Polk

Salary:

38.37 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Five (5) years of recent applicable aircraft maintenance experience.
One (1) year experience performing Technical Inspections on rotary wing aircraft.
A valid and up-to-date (FAA) Airframe and Powerplant (A&P) license.
A Valid FAA Inspection Authorization (IA). If no IA, shall have a minimum of five (5) years as an inspector on helicopters.
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.
Valid Driver's License.

Job Responsibility

Plan, conduct, and supervise aircraft technical inspections.
Develop and implement quality control and ground safety programs to ensure compliance with contract specifications.
Evaluate personnel, including verification of skills, training and experience.
Perform audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities.
Examine parts and components for conformance to design specification to determine serviceability.
Monitor timeliness and applicability of maintenance technical data and technical library.
Review maintenance source documents, inspection records, note recurring discrepancies or trends and initiate appropriate action.
Manage the material deficiency and technical order improvement program.
Review engineering investigation requests.
Initiate and review quality deficiency reports, technical deficiency reports and hazardous material reports.

Fulltime

Aircraft (Rotary Wing) Technical Inspector

The Aircraft (Rotary Wing) Technical Inspector is responsible for ensuring that ...

Location

United States , Fort Polk

Salary:

38.37 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

Five (5) years of recent applicable aircraft maintenance experience
One (1) year experience performing Technical Inspections on rotary wing aircraft
A valid and up-to-date (FAA) Airframe and Powerplant (A&P) license
A Valid FAA Inspection Authorization (IA). If no IA, shall have a minimum of five (5) years as an inspector on helicopters
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location
Valid Driver's License

Job Responsibility

Ensuring that assigned aircraft are maintained within required specifications and are airworthy before operation
Inspects repairs and modification of aircraft structures, structural components and engines of complex to extreme difficulty
Plans, conducts, and supervises aircraft technical inspections
Develops and implements quality control and ground safety programs to ensure compliance with contract specifications
Evaluates personnel, including verification of skills, training and experience
Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities
Examines parts and components for conformance to design specification to determine serviceability
Monitors timeliness and applicability of maintenance technical data and technical library
Reviews maintenance source documents, inspection records, notes recurring discrepancies or trends and initiates appropriate action
Manages the material deficiency and technical order improvement program

Fulltime

Technical Inspector

The AH-64 Aircraft Quality Control Inspector/Technical Inspector (FAA A&P or FCC...

Location

Germany , Illesheim

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High School Graduate or equivalent
Five (5) years of recent applicable aircraft maintenance experience
At least One (1) year of experience inspecting the assigned AH-64 aircraft Mission Design Series (MDS)
A current and valid FAA A&P certificate OR an FCC License with Elements 1 and 3
Requirements without an A&P (FCC Elements 1 and 3 required)
with an FCC License in lieu of the A&P, candidate must have a minimum Five (5) years of experience as an Aircraft Inspector on the AH-64 Mission Design Series (MDS) airframe they will be inspecting
FAA Inspection Authorization (IA) is strongly preferred
Without IA, must have a minimum Five (5) years of experience as an Aircraft Inspector (TI) on the AH-64 (MDS) airframe they will be inspecting
Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 (Public Trust)
Must be able to obtain and maintain facility credentials/authorization

Job Responsibility

Maintain the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment
Inspect, remove, install, repair, replace, modify, disassemble, reassemble and calibrate complex aircraft mechanical and electromechanical systems in accordance with maintenance manuals, test procedures and other military publications
Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components
Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data
Review and approve locally developed procedures and solutions to complex repair situations
Perform analysis of defects and interprets quality control rejection and failure trends
Monitor safety, training, and certification requirements
Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections
Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements
Maintain Quality, Safety, Training and Certification Records

Fulltime

Technical Inspector - UH-60

The Aviation Quality Assurance Technical Inspector is responsible for providing ...

Location

United States , Redstone Arsenal

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

Minimum of 10 years’ Army Aviation maintenance experience
Must have completed a military aircraft repairer school of any of the following aircraft (CH-47D/F/G, UH-60A/L/M, OH-58D, UH-1, AH-64A/D/E, Bell 407, T6)
Must have a minimum of 3 years Army Aviation maintenance quality control experience and have graduated from the BNOCC or equivalent Technical Inspector Course from other services in the Armed Forces
FAA A&P License required
Must have or can have the ability to obtain and maintain a Security Clearance

Job Responsibility

Implement quality control and safety plans to ensure compliance with contract specification and applicable regulations
Inspect all phases of a variety of goods, services or operations for conformity to established quality, health and safety, and other operational standards
Ensure all services listed on the performance requirement summary are performed in a satisfactory manner
Perform scheduled and unscheduled inspections
Communicate deficiencies to proper personnel and follow up when necessary to ensure that corrections are made
Use Microsoft Office Suite and can learn additional computer skills/software programs
Accurately key Data into databases
Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
Effectively communicate with all levels of management and staff including interactions with other crew members
Perform basic mathematical computations

Fulltime

Aircraft quality inspector

You will be part of the team responsible for the execution and confirmation of q...

Location

United States , Mobile Area, AL; Columbus, MS; Kinston, NC

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

High school diploma or GED
3 years of experience as a Quality Inspector in an aviation company or military aviation equivalent with an emphasis on mechanical and/or structural components and assemblies
Knowledge of Quality Management Systems
Knowledge of drawing systems, inspection plans, and inspection coordination
Knowledge of the principles, practices, methods and tools used in the production line
Handling and use of inspection tools of the length measuring techniques (mechanical, optical, electrical)
Physical Requirements: Vision: adequate to enter and read material on computer screens
Hearing: able to hear sufficiently to engage in conversation in office settings
Speaking: able to engage in conversations in person and via electronic means
Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms

Job Responsibility

Execute technical inspections in the production process of the aircraft
Prepare and perform visual, incoming, first article, final inspections during aircraft manufacture for compliance with design specifications, customers and certification requirements
Document the technical inspections performed in the multiple production orders SAP-based and the relevant SAL-based IT systems
Support troubleshooting, Functional Test Procedures(FTPs) and participate in Quality Survey requests
Compile all technical data of non-conformance in order to launch the NCMS-based quality discrepancy sheets
Document all the results of the technical inspector in the FLEXNET/NCMS/SAP based IT system
Attain skills to perform audits of Non-Conformance Rework Orders as part of the Material Review Board (MRB)
Perform audits/reviews of workbooks to validate PV approval and process adherence
Track and maintain components during the Non Conformance process
Perform other duties as assigned

What we offer

Competitive base salaries
incentive compensation
a retirement savings plan
comprehensive health and welfare coverage

Fulltime

Aircraft Quality Inspector

Airbus is looking for an Aircraft Quality Inspector to join our team. You will b...

Location

United States , Mobile Area, AL; Columbus, MS; Kinston, NC

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

High school diploma or GED
3 years of experience as a Quality Inspector in an aviation company or military aviation equivalent with an emphasis on mechanical and/or structural components and assemblies
Knowledge of Quality Management Systems
Knowledge of drawing systems, inspection plans, and inspection coordination
Knowledge of the principles, practices, methods and tools used in the production line
Handling and use of inspection tools of the length measuring techniques (mechanical, optical, electrical)
Physical Requirements: Vision: adequate to enter and read material on computer screens
Hearing: able to hear sufficiently to engage in conversation in office settings
Speaking: able to engage in conversations in person and via electronic means
Equipment Operation: Able to operate a wide range of tools and equipment

Job Responsibility

Execute technical inspections in the production process of the aircraft
Prepare and perform visual, incoming, first article, final inspections during aircraft manufacture for compliance with design specifications, customers and certification requirements
Document the technical inspections performed in the multiple production orders SAP-based and the relevant SAL-based IT systems
Support troubleshooting, Functional Test Procedures(FTPs) and participate in Quality Survey requests
Compile all technical data of non-conformance in order to launch the NCMS-based quality discrepancy sheets
Document all the results of the technical inspector in the FLEXNET/NCMS/SAP based IT system
Attain skills to perform audits of Non-Conformance Rework Orders as part of the Material Review Board (MRB)
Perform audits/reviews of workbooks to validate PV approval and process adherence
Track and maintain components during the Non Conformance process
Perform other duties as assigned

What we offer

Competitive base salaries
Incentive compensation
A retirement savings plan
Comprehensive health and welfare coverage

Fulltime

Select Country

Technical Inspector, Aircraft

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Technical Inspector, Aircraft

Technical Inspector Aircraft

Aircraft Technical Inspector (CH47)

Aircraft (Rotary Wing) Technical Inspector

Aircraft (Rotary Wing) Technical Inspector

Technical Inspector

Technical Inspector - UH-60

Aircraft quality inspector

Aircraft Quality Inspector

Our AI answers in your language