CrawlJobs Logo

Team Lead, RF Production

iceye.com Logo

ICEYE

Location Icon

Location:
Finland , Espoo

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

ICEYE is seeking a RF Production Team Lead to take ownership of all RF-related activities across the satellite production lifecycle—from incoming RF component verification to full satellite-level RF system testing. This is a critical, hands-on leadership role at the core of ICEYE’s spacecraft manufacturing operations. You will lead a multidisciplinary team responsible for RF subsystem assembly, functional testing, and inspection—ensuring that every RF element of the spacecraft meets our rigorous quality and reliability standards.

Job Responsibility:

  • Lead and coordinate the daily activities of the RF production team, ensuring high-quality and on-time delivery of assemblies and tests
  • Oversee the verification of incoming RF components and ensure readiness of antennas and RF systems for integration
  • Execute anechoic chamber tests and characterizations of RF subsystems and components
  • Own the planning, execution, and reporting of subsystem-level functional tests and inspections
  • Lead RF testing at the satellite level, ensuring all onboard RF systems perform reliably in end-to-end configurations—executed together with your team and in close collaboration with others in a matrix structure
  • Ensure test benches, tools, and setups are maintained, functional, and compliant with safety and quality standards, specifically for RF measurements
  • Develop and maintain work instructions, test procedures, and checklists in collaboration with AIT Engineering and Quality teams
  • Train and mentor technicians on best practices in RF assembly, handling, and fault diagnostics
  • Drive process improvements to increase throughput, reduce rework, and enhance traceability and documentation
  • Collaborate closely with Engineering, Production Engineering, and AIT Engineering teams to support troubleshooting and root cause analysis during integration
  • Ensure compliance with relevant aerospace and RF quality standards (ECSS, etc.)
  • Maintain a clean, safe, and organized work environment in alignment with Lean and 6S practices
  • Monitor build progress, proactively identify blockers, and work with planning and supply chain teams to resolve issues
  • Support production ramp-up as ICEYE scales its satellite output, contributing to the growth and development of a high-performing team

Requirements:

  • Bachelor’s degree in RF, Electrical, Aerospace Engineering, or a related technical field with an RF focus
  • 5+ years of hands-on experience in RF production, integration, or testing—preferably in aerospace or other high-reliability environments
  • Proven track record of leading technical teams in a production or test environment
  • Experience in functional and system-level testing of complex RF systems
  • Experience working with RF test benches, tooling, and production documentation
  • Experience in root cause analysis, diagnostics, and fault isolation of RF systems
  • Excellent collaboration and communication skills—especially with Engineering, AIT, and Quality teams
  • Strong mindset of ownership, quality, structure, and continuous improvement
  • Exposure to Lean manufacturing, 6S, or similar process improvement methodologies
  • Structured and quality-driven, but thrives in a dynamic, fast-paced production environment
  • Comfortable working across disciplines and adapting to changing priorities
  • Strong team builder, people mentor, and hands-on leader—leads by example
  • Pragmatic and solution-oriented, with a willingness to improve processes, not just follow them

Nice to have:

  • Background in NewSpace, satellite production, or high-volume aerospace integration
  • Experience in writing and optimizing assembly and test procedures
  • System-level understanding of satellite RF architecture and RF interfaces
  • Familiarity with satellite RF architecture or communication systems
  • Strong background in RF subsystem assembly, waveguide integration, and RF test best practices
  • Familiarity with relevant industry standards (ECSS, or equivalent)
What we offer:
  • Occupational healthcare, occupational, and accident insurance
  • A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
  • Phone subscription with iPhone of choice
  • Relocation support (i.e. flight tickets, accommodation, relocation agency support)
  • Time for self-development, research, training, conferences, or certification schemes
  • Inspiring and collaborating offices and silent workspaces enable you to focus

Additional Information:

Job Posted:
January 13, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
ICEYE - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Team Lead, RF Production

Lead Systems and RF Research Scientist

The STR Sensors Division is at the forefront of developing advanced signal proce...
Location
Location
United States , Woburn
Salary
Salary:
160000.00 - 220000.00 USD / Year
str.us Logo
STR
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Ability to obtain a security clearance, for which U.S. citizenship is required by U.S. Government
  • BS in Electrical Engineering, Applied Mathematics, Physics, or a related technical discipline
  • Demonstrated team leadership and mentoring
  • 8+ years’ experience working with hardware system design
  • Expertise with RF components and subsystems, including T/R modules, rotary joints, pedestal, filters, radiating structures, isolators, amplifiers, ADC/DAC, etc.
  • Design experience in: RF systems, subsystem and/or component analysis (frequency planning, link budget analysis, transceiver architectures, cascade analysis)
  • Design experience in: Electromagnetics & RF/wave propagation
  • Skilled in RF component/subsystem/system test and measurement equipment and techniques (anechoic chambers, oscilloscopes, vector network analyzers, spectrum analyzers, signal generators)
  • Proficiency in MATLAB and/or Python and/or other higher-level languages
  • Strong Mathematical, troubleshooting, written, and verbal communication skills
Job Responsibility
Job Responsibility
  • Collaborate with the team to quantify goals, system performance objectives, performance metrics, dependencies, and risks to guide program execution
  • Lead and work with multi-disciplinary teams to architect, implement, and test RF hardware systems enabling novel sensing, electronic warfare, and signal processing systems
  • Perform trade studies and analyses of proposed hardware architectures. Systems predominantly field deployable prototypes with the objective of transitioning to low-volume product systems
  • Design, calibrate, and implement and perform bench-top unit tests. Document results including correlation with objective system performance
  • Work with signal processing team on innovative sensing system test concepts and execution methods. Develop supporting system analytical test tools/measures
  • Design, document, and implement over-the-air system demonstrations, identifying hardware readiness, test architecture, performance metrics, data management, operational procedures, and performance reports
  • Review system effectiveness and identify opportunities to advance and/or mature subsystems and system capabilities
  • Document system design and performance for customer review. Present results to customers
  • Support business development and proposal writing efforts for next-generation RF hardware system development opportunities
  • Fulltime
Read More
Arrow Right

Hardware Engineer

As a member of our Hardware team, you will lead the design and development of Ve...
Location
Location
Taiwan , Taipei
Salary
Salary:
Not provided
verkada.com Logo
Verkada
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical Engineering
  • 8+ years of experience in developing and manufacturing new electronics products
  • Strong technical knowledge of electrical design, product validation, manufacturing and factory testing, and regulatory compliance
  • Exposure to wireless & EMC related standards in addition to product safety
  • Excellent communication skills
  • Fluency in English and Mandarin
  • Flexible and adaptive in a fast-paced startup environment
  • Experience working with US teams & an international supply chain
  • Ability to travel up to 20%
Job Responsibility
Job Responsibility
  • Lead electrical engineering for new products from initial proof of concept through to mass production
  • Collaborate with an international team of hardware engineers, mechanical engineers, industrial designers and product managers to develop new products
  • Own system architecture, component selection, schematic and layout development
  • Lead schematic and layout review
  • Own and maintain Hardware Requirements Document
  • Perform competitive analysis and product feature benchmarking
  • Quickly prototype new product concepts for mock-up builds and proof of concept studies
  • Get hands-on with board bring-up, debug, testing and validation
  • Build and execute robust engineering test and validation plans
  • Lead root cause analysis efforts related to EMC, surge, thermal, RF testing and more
What we offer
What we offer
  • Private medical insurance by Nan Shan Life Insurance
  • Group insurance scheme including accidental death and dismemberment, critical illness, accident medical reimbursement, hospital and surgical, and cancer indemnity cover
  • Spouse and dependent coverage
  • Paid parental leave policy & fertility benefits
  • Paid holidays, firmwide extended holidays, flexible PTO and personal sick time
  • Professional development stipend
  • Wellness/fitness benefits
  • Meal stipend
  • Commuter benefits
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer, Video

As a Senior Member of Axon's Video Electrical Engineering team, you will lead th...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • 7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits
  • Creative and passionate about innovative design and cutting-edge technology
  • Demonstrated ownership of embedded electronics design across multiple subsystems
  • Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug
  • Proficient leading electronics design and development from concept to mass production
  • Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design
  • Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
  • Experience with Lithium batteries and battery charging circuit design
  • Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS
Job Responsibility
Job Responsibility
  • Own the design of critical electronic circuits and systems
  • Collaborate globally with cross-functional engineering teams to deliver world-class products
  • Mentor and inspire junior engineers, fostering technical growth across the team
  • Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories
  • Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives
  • Use OrCAD to create embedded mixed-signal circuit schematics, integrating components like application processors, image sensors, high speed memory, high speed digital communication buses, RF transceivers, power supplies, battery charging systems, and more
  • Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
  • Bring up, characterize, optimize, and debug systems and circuits using lab tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices
  • Assess design outcomes, test results, and related information and present findings to design team and management
What we offer
What we offer
  • Competitive salary and 401K with employer match
  • Paid time off at your discretion
  • Robust parental leave policy
  • An award-winning office/working environment
  • Ride along with police officers to see them use our technology and get inspired
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer, Video

As a Senior Member of Axon's Video Electrical Engineering team, you will lead th...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • 7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits
  • Creative and passionate about innovative design and cutting-edge technology
  • Demonstrated ownership of embedded electronics design across multiple subsystems
  • Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug
  • Proficient leading electronics design and development from concept to mass production
  • Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design
  • Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
  • Experience with Lithium batteries and battery charging circuit design
  • Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS
Job Responsibility
Job Responsibility
  • Own the design of critical electronic circuits and systems
  • Collaborate globally with cross-functional engineering teams to deliver world-class products
  • Mentor and inspire junior engineers, fostering technical growth across the team
  • Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories
  • Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives
  • Use OrCAD to create embedded mixed-signal circuit schematics
  • Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
  • Bring up, characterize, optimize, and debug systems and circuits using lab tools
  • Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices
  • Assess design outcomes, test results, and related information and present findings to design team and management
What we offer
What we offer
  • Competitive salary and 401K with employer match
  • Paid time off at your discretion
  • Robust parental leave policy
  • An award-winning office/working environment
  • Ride along with police officers to see them use our technology and get inspired
  • Fulltime
Read More
Arrow Right

Firmware Lead & Manager

Lunar is seeking an experienced and driven Firmware Lead & Manager to spearhead ...
Location
Location
United States , Mountain View
Salary
Salary:
150000.00 - 210000.00 USD / Year
lunarenergy.com Logo
Lunar Energy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in a computer-engineering related or adjacent field, or demonstrated commensurate ability
  • 7+ or more years of experience delivering firmware for new products as part of a team
  • Proficiency in C, and working familiarity with Cmake
  • Expert in firmware fundamentals, in architecture & design, Algorithm development, Code modularity and maintainability, CPU architecture and compilers etc.
  • Ability to explain and communicate about technical concepts with engineers in a variety of fields
  • Proven experience in the total lifecycle of products (power electronics). From prototype/initial bringup to phased development and testing, manufacturing, fleet deployment
  • Strong understanding of design for power electronics or battery systems is highly desirable
  • Understands company objectives to create and lead the engineering execution
  • Quickly learns the technology and becomes the goto person for that area of product expertise
  • Leads team on technical challenges and provides guidance and support in execution
Job Responsibility
Job Responsibility
  • Work collaboratively with other disciplines across the company to continuously refine and improve our understanding of how our products can create the greatest impact, get to market quickly, and operate reliably for our customers
  • Test ideas and designs: back-of-the-envelope calculations, building simulations, and designing validation tests
  • Design firmware & software that runs in our home energy product components: Power electronics controls, system-level behaviors, and optimization, mobile app design and interfaces, system diagnostics and updates, RF and powerline communication protocols, control algorithms, and installation automation features
  • Optimize manufacturing by designing automation support functionality in our components whose design reflects the part they play in the processes that create them and test them, and by supporting our features within our manufacturing partners
  • Drive team by hiring, mentoring and managing highly skilled engineers
  • Manage schedules and resources working with cross functional internal customers
  • Lead design and test methods for new features to enhance product functionality
What we offer
What we offer
  • Medical, dental, and vision insurance for employees and dependents
  • Flexible Paid Time Off plus 10 paid holidays
  • Tax deferred 401(k) plan
  • Paid parental leave for all full time employees including 12 weeks paid parental leave for the birthing mother and 6 weeks paid parental leave for the non-birthing parent
  • Subsidized EV charging and pre-tax commuter benefits
  • Fulltime
Read More
Arrow Right

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
  • Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
  • Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
  • Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
  • Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
  • Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Perform debug, failure analysis, and rework of electronics systems, circuits, and components
  • Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
  • Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
  • Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
  • Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
  • Assess and document design change outcomes, test results, and related information and present information to design teams and management
  • Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Hardware Engineer

As a Hardware Engineer on our Hardware team, you will lead the design and develo...
Location
Location
United States , San Mateo
Salary
Salary:
95000.00 - 280000.00 USD / Year
verkada.com Logo
Verkada
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. in Electrical Engineering
  • M.S. preferred
  • 5+ years experience in designing new electronics products
  • Ability to travel internationally up to 15%
Job Responsibility
Job Responsibility
  • Lead electrical engineering for new products from initial proof of concept through to mass production
  • Collaborate with an international team of hardware engineers, mechanical engineers, industrial designers, software engineers and product managers to develop new products
  • Own component selection, schematic and layout development based on the architecture you have created
  • Own and maintain Hardware Requirements Document, ensuring it accurately captures all system-level and component-level hardware specifications
  • Quickly prototype new product concepts for mock-up builds and proof of concept studies
  • Get hands-on with board bring-up, debug, testing and validation
  • Build and execute robust test plans by leveraging resources at our JDM/ODM partners
  • Lead root cause analysis efforts related to EMI/EMC, surge, thermal, OTA prescan, other RF testing and more
  • Lead JDM teams to efficiently and effectively complete programs
  • Work closely with manufacturing partners to steer hardware designs through design and validation builds (EVT, DVT, PVT) and into mass production
What we offer
What we offer
  • Healthcare programs that can be tailored to meet the personal health and financial well-being needs - Premiums are 100% covered for the employee under at least one plan and 80% for family premiums under all plans
  • Nationwide medical, vision and dental coverage
  • Health Saving Account (HSA) with annual employer contributions and Flexible Spending Account (FSA) with tax saving options
  • Expanded mental health support
  • Paid parental leave policy & fertility benefits
  • Time off to relax and recharge through our paid holidays, firmwide extended holidays, flexible PTO and personal sick time
  • Professional development stipend
  • Fertility Stipend
  • Wellness/fitness benefits
  • Healthy lunches provided daily
  • Fulltime
Read More
Arrow Right

Senior RF Design Engineer

This position presents the opportunity to apply expertise in Radio Frequency (RF...
Location
Location
United States , Middletown
Salary
Salary:
Not provided
nuwaves.com Logo
NuWaves RF Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in a related field
  • 15+ years of RF module and/or RF Systems engineering experience
  • U.S. Citizenship
  • Technical leadership in setting and accomplishing project tasks
  • Proficient in the design of RF systems
  • Subject Matter Expert (SME) in the design of specialized RF circuits and systems
  • Broad yet expert knowledge and understanding of RF electrical circuits and systems
  • Expert in the use Engineering Design Software tools (e.g. Genesys, AWR, SPICE)
  • Complex problem solving/analysis
  • Results-Driven Leadership
Job Responsibility
Job Responsibility
  • Make sound decisions for system approaches and tradeoffs
  • Assist in improving daily processes to ensure the Engineering Technical Team meets customer requirements
  • Lead the RF Engineering Technical Teams to be a culture in alignment with NuWaves’ Culture statement
  • Communicate effectively, both verbally and by writing, to Program Managers and to the Engineering Technical Team
  • Lead the Bid and Proposal (B&P) process by providing engineering cost estimates, technical writing that conveys competency, technical evaluation, engineering approaches, and detailed solutions
  • Write technical papers, white papers, status reports, and application notes that support NuWaves’ strategic and tactical plans
  • Be accountable to Program Managers in meeting deadlines and deliverables
  • Mentor junior RF engineers
  • Direct Engineering Technicians to effectively and proficiently complete project tasks
  • Work effectively with CAD engineers in capturing design details
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy