Systems Engineer - Automatic Flight Control Systems Job at Real Time Consulting (Phoenix)

Systems Engineer - Automatic Flight Control Systems

Join a team that designs, develops, and integrates highly complex avionics syste...

Location

United States , Phoenix

Salary:

Not provided

Real Time Consulting

Expiration Date

Until further notice

Requirements

Bachelor's degree in engineering, science, or technology
2+ years of experience working on flight controls
Understanding of the systems development lifecycle
Requirement analysis
Requirement decomposition
Systems design and architecture
Model-based systems development
Systems integration
Systems validation & verification
Strong analytical and problem-solving skills

Job Responsibility

Design, develop, and integrate highly complex avionics systems
Work on Automatic Flight Controls Systems for Business, Regional, and General Aviation platforms

Fulltime

Systems Engineer - Automatic Flight Controls

Join a team that designs, develops, and integrates highly complex avionics syste...

Location

United States , Phoenix

Salary:

Not provided

Real Time Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering, science, or technology
2+ years of experience working on flight controls
Understanding of the systems development lifecycle
Experience in one or more of the following areas: Requirement analysis
Requirement decomposition
Systems design and architecture
Model-based systems development
Systems integration
Systems validation & verification
Strong analytical and problem-solving skills

Job Responsibility

Design, develop, and integrate highly complex avionics systems
Work on Automatic Flight Controls Systems for Business, Regional, and General Aviation platforms

Fulltime

AAR Control System Engineer

A position as a AAR Control System Engineer has arisen within Airbus Defence & S...

Location

Spain , Getafe

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Leadership skills, including Business focus, Team focus, integrity, proactive and autonomous, communication skills
Electronic engineer, telecommunication engineer, aerospace engineer (or similar)
Desired experience of 3+ years in development, A/C installation and certification of A/C avionics systems (electronic control systems for any on-board system, etc.)
Control architectures for achieving demanding safety and availability levels (control and monitoring techniques, dissimilarity considerations, redundancy management, etc.)
Network architectures (AFDX, 1553, CAN...)
Control computer development: power and control electronics, common control physical and functional interfaces (discrete, analogue, sensors, digital buses: A429, CAN, 1553, AFDX, discrete/analogue, sensors...), equipment functional and environmental qualification, EMI/EMC, etc.)
Mechatronics desirable (microelectronics, power control electronics, motors, actuators, mechanisms, sensors, control design, hydraulics, pneumatics, etc.)
Experience with system testing environment (specification/design, execution, exploitation of test means for system testing: control computer bench testing specification and exploitation, control / actuation system integration, environmental testing, test systems such as SEAS, LABVIEW/VERISTAND, AIDASS)
Desirable experience with simulation and modelling tools (esp. Matlab Simulink and toolboxes): physical modelling, control modelling, automatic code generation for on-board control SW
Desirable experience with control computer SW functionality design and specification process

Job Responsibility

Define, develop and integrate Control, Monitoring & Recording Sub-system / equipment / component / module matching the required safety, quality and performance levels
Manage the development of Control, Monitoring & Recording Sub-system / equipment / component / module for Airbus, including Systems Architecture
Specify considering the following factors: Safety, Quality, Systems Performance, Cost, Environmental, Operational and Industrial Requirements
Actuation and Control systems development for the Air Refueling Systems, including BOOM and Hose & Drogue (A330 MRTT and other development platforms)
Development of flight control computers functionality (SW)
Control design and practical application to mechatronic systems, simulations, etc.
Specification, monitoring of development of electronic flight control equipment by external suppliers (computers, sensors, etc.), integration and acceptance testing
Practical experience in supplier monitoring (spec, SoW, design reviews, qualification, supplier steering, etc.)
Along the product lifecycle: concept design, system/subsystem/equipment specification, detailed design follow up, A/C installation, supplier monitoring and technical product acquisition, testing, certification, etc.

Fulltime

Electronics Technician Maintenance II – C130 Guidance & Control Systems (GAC)

The Electronics Technician II applies comprehensive technical knowledge to solve...

Location

United States , Hurlburt Field

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

Minimum of 6 years of C-130 GAC (2A4X1), aircraft, avionics and electrical system experience
Knowledge to operate and repair the 1553 data bus system
Operational knowledge and ability to troubleshoot and repair the digital fuel quantity system
Operational knowledge and ability to troubleshoot and repair the pitot statics system
Operational knowledge and ability to troubleshoot and repair the autopilot system
Operational knowledge and ability to troubleshoot, repair, and perform downloads of the digital flight data recorder (DFDR)
Operational knowledge of the Data Transfer and Diagnostic System (DTADS)
Familiar with the Isochronal / Letter Check inspection process
Proficient with using USAF Technical Orders, operating the Data Transfer and Diagnostic System (DTADS) and documenting AFTO 781 Forms
Ability to obtain a DoD Security Clearance

Job Responsibility

Applies comprehensive technical knowledge to solve complex problems by interpreting manufactures' manuals, or similar documents
Inspects, analyzes, troubleshoots, and maintains aircraft guidance and control systems (GAC) such as automatic flight control systems, inertial navigation systems, flight instrument systems, and related integrated systems
Advises on problems operating and maintaining aircraft guidance and control systems, associated electronic components, subsystems, and test equipment
Solves maintenance problems using wiring diagrams, schematic diagrams, and technical publication by analyzing operating characteristics of guidance and control systems
Receives technical guidance, as required from a supervisor or higher-level technician
May also provide technical guidance to lower-level technician
Maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment
Applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance
Reads and interprets USAF technical orders, service bulletins, engineering data, and other specifications to determine feasibility and best method of repairing or replacing malfunctioning systems

Fulltime

Intern development & flight simulator integration

During your internship, you will work together with System Engineers in close co...

Location

Germany , Donauwörth

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Enrolled full-time student (d/f/m) in the area of computer science, aeronautical or mechanical engineering or an equivalent field of study
Experience in the fields of Software Engineering, Requirements Engineering and Control Engineering is desirable
First experience in the fields of Game Development, 3D Computer Graphics, User-centered Design/HMI or Artificial Intelligence Systems is desirable
Experience in flight operations is a plus
Fluent in English
Please upload the following documents: cover letter, CV, relevant transcripts, enrolment certificate

Job Responsibility

Refine the HMI application based on previous evaluation results and pilot feedback regarding automatic approach maneuvers in unprepared landing areas
Execute the technical integration of the HMI into the flight simulator’s hardware
Implement data interfaces between external trajectory planning software provided by project partners and the cockpit display systems
Develop complex simulation scenarios including dynamic obstacles, terrain, and flight data to stress-test the situational awareness functions
Validate system performance through structured test campaigns in the flight simulator, involving collaboration with pilots or flight test engineers
Analyze the synchronization of flight guidance algorithms with the visual feedback provided to the crew to ensure operational safety and reduced workload

What we offer

Attractive salary and work-life balance with a 35-hour week (flexitime)
International environment with the opportunity to network globally
Work with modern/diversified technologies
At Airbus, we see you as a valuable team member and you are not hired to brew coffee, instead you are in close contact with the interfaces and are part of our weekly team meetings
Opportunity to participate in the “Generation Airbus Community” to expand your own network

Fulltime

Quality Engineer, Airworthiness Compliance

WE’RE LOOKING FOR A QUALITY ENGINEER, AIRWORTHINESS COMPLIANCE. Ensure complianc...

Location

Canada , Fort Erie

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Aerospace, Aviation, Engineering or equivalent related field experience
TCCA Aircraft Maintenance Engineer License (AME)
10 years related Quality inspection on Aircraft components and systems
In lieu of degree, 15 years combined experience in a Quality Assurance capacity and/or as a certificated aviation maintenance technician (AMT) and/or (AME)
Airbus H125, H130, H135 Type Rated Training
Ability to interpret technical and regulatory documentation
Ability to effectively communicate verbally and in writing with all levels of personnel
Familiar with inspection tools, aids and devices used in determining tolerances and specification limits
Have the experience and flexibility to work in multiple areas
Must have the ability to interface with the external customer in regards to aircraft and aircraft records presentation at delivery

Job Responsibility

Ensure compliance with Transport Canada Civil Aviation (TCCA) CAR 571 and 573 regulations for Aircraft airworthiness, return to service after maintenance, repair or alterations
Support quality inspectors in the daily activities related to maintenance, coordination of Aircraft & Engine Calendar and/or hourly inspections, repairs, alterations and conformity inspections of aircraft parts, paint and related Backshop, Maintenance Repair and Overhaul (MRO) activities
Act as a quality interface between internal and external customers for nonconformance resolutions and customer aircraft delivery activities
Airworthiness Compliance: Responsible for representing the Certified Repair Station (CRS) or Transport Canada Civil Aviation Approved Maintenance Organization (AMO) for U.S aeronautical products maintained under Bilateral agreement between Canada and United States for the approval of Aircraft, Airframe, Aircraft engine(s), propellers/rotors, appliances or component parts for return to service (RTS) after undergoing inspection, maintenance, preventive maintenance, rebuilding or alterations and for making an entry in the applicable maintenance records with content, form and disposition acceptable to TCCA administrator and Airbus company RTS procedures
Compile comprehensive list of airworthiness directives, alert service bulletins and optional service bulletins, document preservation, maintenance or inspections of Aircraft, Engine(s), Dynamic components, Main or Tail rotor blades, component changes as applicable in respective component log cards for final conformity of Aircraft
Issue TCCA Form Ones, conformity inspection records, airworthiness approvals of new products and articles, return to service of inspected products and articles, that conform to the approved type design requirements and are in a condition for safe operation using procedures
Validation of inspection and/or compliance of life limited, cycle limited components, airworthiness directives, Emergency alert and alert service bulletins for applicable airframe, engine(s) and component calendar and/or hourly technical inspections per applicable manufactures recommended, TCCA/ AMM/ICA approved continuous airworthiness inspection programs
Ensure the state of preservation for Airframe and Engine(s) are reviewed for proper application and current with applicable intervals and carry on calendar maintenance intervals
Validation of testing of emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators, Air Data Computers, aircraft static pressure systems and automatic pressure altitude reporting systems in accordance with applicable TCCA regulations
Witness functional/operational tests, check-outs, and adjustments of aircraft radios and navigational instruments

Fulltime

Manufacturing Engineer with ACTIVE Secret Clearance

Performs in a collaborative environment to develop and implement manufacturing p...

Location

United States , Palmdale

Salary:

50.00 - 100.00 USD / Hour

GeoLogics

Expiration Date

Until further notice

Requirements

Must have experience specifically in Vehicle systems (not structures, not composites)
Aviation experience required
Experience in a manufacturing environment working cross functionally with other disciplines including industrial engineering, planning, scheduling, Quality Assurance &/or production planning
Experience with some combination of the following: experience with manufacturing processes and procedures including: assembly, machining, and electrical in several disciplines including metallics, machining, electrical harness fabrication and routing, systems installations, &/or final assembly operations
Previous experience developing visual work instructions for use in a manufacturing environment
Experience with Teamcenter and CATIA
3 years of recent Catia V5 experience
3 years of recent Teamcenter experience
5 years of air vehicle systems experience required (hydraulics, fuel, electrical, propulsion, avionics, flight test, ground test, environmental control systems, etc.)
BS degree and 9-15 years of experience or MS degree and 7-13 years of experience

Job Responsibility

Performs in a collaborative environment to develop and implement manufacturing processes and procedures for assemblies and equipment installation
Drives adoption of new technologies and processes (automation, robotics, computer aided manufacturing software, etc.) to achieve greater efficiency, cost reduction and quality improvement
Creates and analyzes 3D based model data environment to optimize manufacturing process and digital work instructions
Leverages understanding of materials and automatic processes to define operations procedures and build sequences to drive operational excellence
Evaluates performance (including IoT devices, etc.) of equipment and tools to verify their efficiency and investigates and initiates corrective action of problems and deficiencies to ensure operational excellence
Leverages factory data to develop statistical process control approaches and integrates reporting and data analytics solutions for continuous improvement
Provides input to product design regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques

Fulltime

Artificial intelligence integration for collaboration & communication

The Airbus UpNext Optimate demonstrator will pave the way to smart automation ca...

Location

France , Toulouse Area

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Engage in Engineer Master’s degree in IA specialization, Data Science, On-Board systems or a related field
Frameworks IA : PyTorch, TensorFlow, Hugging Face (Transformers), spaCy
NLP architecture Knowledge (BERT, LLM …)
ASR (Automatic Speech Recognition) knowledge
Interest with Edge AI (ONNX, TensorRT, Quantization) techniques
Strong Knowledge in Python mandatory
C++ ou Rust knowledge for integration purpose
Knowledge on Internet Of Things (IOT) and cloud technologies
Passion about technology, science
Eagerness to take initiatives to propose simpler and efficient ways of working

Job Responsibility

Develop, train, and above all, integrate AI components into our demonstrator
NOTAM Management: develop a model capable of semantically analyzing NOTAM messages to tag them (Weather, Runway closed, Danger, Info) and prioritize them according to the flight plan
Voice Interface (Speech-to-Text): Implement a voice transcription engine (such as Whisper or an equivalent optimized version) capable of running on the Cloud and locally (Edge AI)
Goal: Allow for automatic transcription of radio communications from air traffic control
System Integration: port your models so they run on our architecture (C++/Python integration, containerization, CPU/GPU resource optimization)

What we offer

A fun and supportive working environment that not only fosters your development in many ways, but also rewards it with plenty of room to grow
A shared open space office with highly skilled multicultural teams
UpNext communities bonding events
A high-achieving, experienced and fun team
Canteen with a different desert each day and free coffee

Fulltime

Select Country

Systems Engineer - Automatic Flight Control Systems

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Systems Engineer - Automatic Flight Control Systems

Systems Engineer - Automatic Flight Control Systems

Systems Engineer - Automatic Flight Controls

AAR Control System Engineer

Electronics Technician Maintenance II – C130 Guidance & Control Systems (GAC)

Intern development & flight simulator integration

Quality Engineer, Airworthiness Compliance

Manufacturing Engineer with ACTIVE Secret Clearance

Artificial intelligence integration for collaboration & communication

Our AI answers in your language