System Integration Engineer for Automotive Applications – Communication specialist Job at Robert Bosch Sp. z o.o. (Modugno)

Field Applications Engineer

We are looking for an experienced Field Applications Engineer to join our Telema...

Location

United States , Michigan

Salary:

Not provided

ACETECH TRUCK REPAIR INC.

Expiration Date

Until further notice

Requirements

3–5 years’ hands‑on experience in automotive electronics, telematics installation or similar 12‑volt vehicle technology role
Strong practical experience troubleshooting 12‑volt vehicle electrical systems (e.g. wiring faults, grounding issues, blown fuses, battery drain, CAN‑bus related issues)
Comfortable travelling extensively across the United States, including regular long driving days, domestic flights and routine overnight stays
Ability to work independently in the field, often without direct on‑site supervision, while maintaining high quality and safety standards
Ability to read and follow wiring diagrams, installation instructions and technical procedures
Good communication skills, both verbal and written, with the ability to build rapport with customers
Valid US driving licence with a clean driving record
Computer literate with experience of O365 and JIRA ticketing system or similar

Job Responsibility

Travel to ambulance builders, vehicle outfitters and other customer sites to install control panels in a wide range of vehicles and equipment, following company and manufacturer guidelines
Carry out advanced 12‑volt electrical work, including power and ignition connections, relays, fusing, harness routing and integration with OEM and specialist systems
Use appropriate hand and power tools safely and correctly, ensuring tidy and secure installations suitable for emergency and specialist vehicles
Configure and test installed systems to confirm correct operation and connectivity
Verify GPS/telematics functions, inputs/outputs and communication with back‑office platforms, resolving issues where possible on‑site
Escalate complex technical issues to senior technical support where required, providing clear information on findings
Diagnose and resolve faults in 12‑volt vehicle electrical systems related to installations, including wiring faults, poor grounds, blown fuses and parasitic drains
Perform routine maintenance, upgrades and removal/re‑installation of systems as required
Work largely unsupervised in the field, managing your own schedule and prioritising jobs effectively
Complete installation, service and stock usage reports accurately and on time using company systems

What we offer

Competitive salary and expenses package (mileage, flights and subsistence for field work)
Medical Insurance
401K
Employee Assistance Program
Overtime opportunities, depending on workload and customer needs
Structured training and development on our systems and platforms, with support for relevant technical certifications
A supportive, collaborative team environment with a strong focus on safety, quality and customer service

Fulltime

VMEC Suspension, Senior Sub-System Lead Specialist

The SSLE is a dynamic individual contributor with recognized expertise, responsi...

Location

Canada , Markham, Ontario

Salary:

115000.00 - 164600.00 CAD / Year

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Systems / Mechatronic / Controls / Electrical / Software / Mechanical or related engineering discipline
Minimum of 6+ years of relevant experience
Experience related to mechatronic systems or subsystems
Basic knowledge of controls theory and the software development process
Strong analytical problem-solving skills, including independent judgment and decision-making skills, where problems are very unusual and extremely difficult
Demonstrated communication and interpersonal skills required to build relationships with team members and customers to solve problems and resolve issues
Physics-based understanding of the Voice-of-Customer
Ability to effectively communicate issues, status and recommendations to leadership
Proven ability in project management skills and ability to teach others
Ability to prioritize work with limited direction

Job Responsibility

Create and maintain Sub-System Technical Specifications (SSTS) and other requirements (Component Technical Requirements Specifications-CTRS, serial data, diagnostics, U-services, etc.) for applicable subsystems and ART software solutions using requirements management software (e.g. DOORS Next Gen, DOORS)
Create and maintain Behavior Technical Specifications (BTS) for applicable software solutions, following Behavior Driven Development (BDD) principles. This includes leading triad meetings and discussions with key stakeholders
Develop and maintain blueprints and/or functional block diagrams for assigned software solutions
Design and Sustain Model Based Systems Engineering (MBSE) diagrams (e.g. Block Definition Diagram, Use-case Diagram, Activity Diagram, Internal Block Diagram) for responsible software solutions using Rhapsody
Establish and Uphold Subsystem/Solution Failure Mode and Effect Analysis (FMEAs) using the FMEA Integration Tool (FIT). Support the development and linking of Software Component FMEAs, Process FMEAs, and system FMEAs, when appropriate, by providing context of software related failure modes and contributions, with a focus on high severity items
Collaborate cross-functionally with other SSLEs to ensure robust integration of subsystems/solutions, including failure mode discussions for interfaces between your subsystem/solutions to other subsystems/solutions
Create and update Calibration Bill of Materials (CalBOM) template for calibrations
Collaborate with Controls and Software Engineers to review controls design and/or software implementation, providing guidance to ensure compliance with requirements
Support definition and implementation of Testable Functionality Roll-Out Plan (TFRP)
Collaborate with Validation Engineers to support the creation of testable scenarios to ensure intent of BTS requirements is met with a robust test plan

What we offer

Paid time off including vacation days, holidays, and supplemental benefits for pregnancy, parental and adoption leave
Healthcare, dental, and vision benefits
Life insurance plans to cover you and your family
Company and matching contributions to a Defined Contribution Pension plan to help you save for retirement
GM Vehicle Purchase Plan for you, your family and friends

Fulltime

Calibration & Compliance Specialist

Calibration and Compliance Specialist is responsible for overseeing, performing,...

Location

United States , Oxnard

Salary:

Not provided

Volkswagen AG

Expiration Date

Until further notice

Requirements

5-7 years of experience in automotive, mechanical, chemical, environmental engineering
Bachelors Degree in Mechanical, Electrical, Environmental engineering or equivalent
Specific knowledge of Emissions Equipment Calibrations ISO17025 experience
Analytical and Conceptual thinker
Communication skills – interpersonal, presentation and written
Computer Proficiency – skilled in the use of various test software
Detailed Oriented / Highly Organized
System Integration
Multi-tasker
Problem Solving

Job Responsibility

Overseeing, performing, and verifying all regulatory calibration verification and certification requirements in the Emissions laboratory and ensuring the accuracy and reliability of all calibration results, supporting full compliance of test equipment and procedures with applicable governmental regulations

Fulltime

Calibration Technical Specialist - Low Voltage Infrastructure

GM's Low Voltage Infrastructure Team within the Embedded Platform Systems & Infr...

Location

United States , Milford

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical, Electrical, Computer, or Chemical Engineering
Minimum 7 years of overall job-related engineering experience
Minimum 5 years of Calibration specific experience
Strong background in calibration/controls, including associated tools (MATLAB, Simulink, INCA, CRETA, Vehicle Spy, CalCheck, JIRA, etc.)
High proficiency in root causing and triaging complex vehicle and system-level issues, with demonstrated ability to lead structured problem-solving efforts, drive issues to closure, and implement corrective actions across hardware, software, and calibration domains
Expertise with 12V/Low Voltage Electric Power Systems and/or Controls (low voltage setpoint control, battery saver modes, and low voltage load management)
Thorough knowledge of calibration process and Calibration Standard Work
Strong leadership skills with demonstrated ability to: Provide technical direction to other engineers and engineering support personnel, Drive global and industry decisions, Lead discussions, action plans, and solutions to drive issues to closure
Exercises independent judgment with minimal input from Engineering Group Manager
Proven leadership capabilities with a track record of driving results, demonstrating initiative, and maintaining strong “it’s on me” ownership

Job Responsibility

Technical leader for Electric Power (12V and Low-Voltage System) calibration for all Electrification and ICE vehicle programs
Lead the development of calibration strategies
serve as the Calibration Strategy Lead and Future Calibration Strategy Lead, developing and evolving Low Voltage Infrastructure calibration approaches to support next-generation Electric Power architectures
Develop common approaches and institutionalize them in Calibration Standard Work (Calibration Procedures, Cal Planner, Deliverables, Master Calibration, Cal Guides, CEGs / Cal Check, etc.)
Serve as the Calibration SME and Technical Leader to all LVI Scrums and TRBs, providing expert-level calibration guidance and ensuring alignment across all active programs
Serve as the Technical Response and Triage Expert and Lead
drive identification, prioritization, and resolution of technical issues through structured triage processes and lead a Calibration TRB
Identify and resolve requirement gaps in partnership with Technical Owners, ensuring calibration requirements are complete, accurate, and aligned across subsystems and programs
Improve the efficiency and quality of Calibration Standard Work by systematically driving present vehicle-based tasks into Lab and/or Math/Virtual environments
Mentor Calibration Engineers, providing technical training and establishing good communication and knowledge-sharing

What we offer

medical
dental
vision
Health Savings Account
Flexible Spending Accounts
retirement savings plan
sickness and accident benefits
life insurance
paid vacation & holidays
tuition assistance programs

Fulltime

Customer Service Case Manager

At Percepta, we deliver award-winning services for every stage of the automotive...

Location

United States , Houston

Salary:

19.50 USD / Hour

TTEC

Expiration Date

Until further notice

Requirements

High school diploma required
Associate or bachelor’s degree preferred
Two (2) years of experience in a Customer Relations Contact Center or hospitality industry
Experience in a luxury field (hospitality or brand product) is a plus
Knowledge of the automotive industry is a plus
High level of trust and integrity
Strong verbal and written communication skills
Detailed listening skills
Strong customer service, interpersonal, and relationship-building skills
Time management and the ability to prioritize projects and customer needs

Job Responsibility

Provide an exceptional customer experience with a focus on building a relationship of trust and enthusiasm while guiding the customer from their initial contact through case resolution
Act as a resource for all product knowledge and service support
Actively listens to the customer while controlling the interaction to lead the customer in a professional and efficient manner
Act as a liaison between the customer, service support, and dealership by following up to ensure customer satisfaction
Be responsible for handling inbound customer calls in a helpful, courteous, and professional manner, displaying knowledge and concern for their needs
Be responsible for handling emails
Exhibit strong follow-up and organizational skills in both verbal and written communication
Be responsible for resolving customer issues using all available resources, including dealers (i.e., Service Personnel, Subject Matter Experts (SMEs), Leadership, and Field Service Engineers)
Return all email and voice mail messages promptly and follow up with customers and dealers as committed
Be responsible for documenting all customer interactions

What we offer

Health/Dental/Vision/Life Insurance
Flexible Spending Account (FSA) and Health Savings Account (HSA)
401(k) with company match
Vacation/Sick Time and Paid Holidays
Tuition Reimbursement
Employee Assistance Program
Employee Discount Program
Training and Development Programs (Percepta College)
Employee Rewards Program (Perci Perks)

Fulltime

Design Engineer – BTV

Location

Germany , Munich

Salary:

Not provided

GESS Engineering

Expiration Date

Until further notice

Requirements

CATIA knowledge is a must
2+ years in field
Development of CAD models
Design and modeling of flexible components, brackets, and brake components using CATIA CAD software
Creation and adaptation of 3D models
Construction and design of components
Development of components such as brackets, fasteners, and other components for brake and chassis components
Ensuring that the components meet the requirements for strength, flexibility, and load-bearing capacity
Consideration of manufacturing tolerances and material properties during development
Commissioning/performing structural simulations to validate components (e.g., FEM analysis)

Job Responsibility

Responsibility for the quality of the developed components
Ensuring that all developed components meet quality standards and can be used safely in automotive applications
Responsibility for compliance with design guidelines
Responsibility for on-time delivery
Ensuring that all components are developed and tested within the specified time frame
Cost management and efficiency
Responsibility for cost control in component development, particularly with regard to material selection, manufacturing costs, and process optimization
Compliance with industrial standards and regulations
Responsibility for compliance with relevant technical standards and regulations
Continuous improvement

What we offer

Attractive salary (negotiable based on technical knowledge)
Meal Tickets
One bonus vacation day for every 2 years of seniority in our company
Flexible working time
Private medical insurance package
Bonus for internal recommendation
Access to over 650 sports centers in the 7Card network
Opportunity to read a lot of books from Bookster
Environment provided for professional development
High tech infrastructure

New

IT Training Lead

The IT Training Lead will drive technology learning and user adoption across the...

Location

United States , Delray Beach

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Experience in IT training, instructional design, technical enablement, or learning and development
Strong knowledge of Microsoft 365
Excellent communication, facilitation, and content development skills
Ability to translate technical concepts into practical, user-friendly training.

Job Responsibility

Design, develop, and deliver IT training programs in instructor-led, virtual, and self-paced formats
Take lead in the Microsoft Copilot and AI training strategy, including onboarding, advanced use cases, responsible AI usage, and ongoing enablement
Partner with IT leadership to support new technology rollouts, system upgrades, and digital transformation initiatives
Create and maintain training content, including videos, guides, tutorials, and job aids
Identify skill gaps and develop targeted learning solutions to improve adoption and productivity
Gather feedback and measure training effectiveness to continuously improve programs.

New

K Kitchen Representative

The position includes, but is not limited to, the following essential job duties...

Location

United States , New Albany

Salary:

Not provided

Circle K

Expiration Date

Until further notice

Requirements

Excellent communication skills
Team player who can work well with others or independently
Acts with integrity
keeps commitments
Contagious positive attitude
Focuses on achieving results while having fun
Frequently bend, twist at waist, kneel, squat, stand, and walk
Occasionally climb and descend ladders
Tolerate extreme cold and hot temperatures and work in and around fryers, ovens, grills, coolers, freezers, sharp objects, and loud noises
Reach, grasp, and manipulate objects with hands for entire shift, including reaching for objects overhead

Job Responsibility

Provides excellent guest service in a fast and friendly manner
Maintains a clean restaurant environment by cleaning and performing general housekeeping duties
Prepares and serves food items in accordance with all Brand, Company, and health department regulations
Ensures product quality, food safety, and operational standards are met
Keeps accurate cash, sales, and inventory control records
Follows all government laws and safety codes
Completes reports on all incidents following our 5-minute rule policy
Lives our Company values: One Team, Do the Right Thing, Takes Ownership, Play to Win

What we offer

Medical, Dental, Vision, Term Life and AD&D plans
Flexible spending and health savings accounts (FT)
Vacation paid time off
Company holidays paid at time and a half
Matching 401(k)
Tuition Reimbursement
Stock Purchase Plan
Employee Discount Program
Discount Meal Benefit
Wellness Plan

Select Country

System Integration Engineer for Automotive Applications – Communication specialist

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?