CrawlJobs Logo

Sustainability Engineer

amgen.com Logo

Amgen

Location Icon

Location:
Portugal , Lisbon

Category Icon
Category:
-

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

Amgen is searching for an Engineer responsible for planning, design, construction, and operational support to world-wide Amgen clients with emphasis on environmental sustainability related projects and initiatives. This Engineer will work out of Amgen Capability Center Portugal (ACCP). The Engineer will be part of the Engineering Operations and Services (EOS) department with a focus on technical assessment, planning, oversight, and design for projects and initiatives that reduce carbon footprint, water consumption, and waste generation.

Job Responsibility:

  • Support the Corporate Environmental Sustainability program by developing and providing updates to strategic energy/carbon, water, and waste reduction targets across global sites
  • Identify energy and water consumption improvement initiatives and innovative alternative technologies to optimize utility usage
  • Develop the assessment, cost analysis, technical feasibility, and lifecycle impact of potential energy, water, and waste reduction related projects. This would include generating HVAC, heat-load, energy related, and mass/energy balance calculations
  • Develop presentations and reports to facilitate the business case development of project proposals
  • Work with system subject matter experts (SMEs) and clients to develop and specify opportunities for integration of projects within capital planning and equipment lifecycle-based replacement projects
  • Analyze the system and facilities energy and water usage as well as utility costs to find opportunities for performing energy and water audits on sites and drive energy efficiency and decarbonization initiatives across international locations
  • Identify system retro-commissioning opportunities to support advancement of monitoring based commissioning process/digitalization of equipment performance monitoring
  • Work with project design teams and external consultants to design, develop, and support engineering project development, plans, standards, and equipment selection
  • Ensure commissioning and qualification standards are developed and used. Provide support & lead aspects of C&Q (Commissioning & Qualification)
  • Investigate technology and issues as a technical SME for initiative and project design teams. Designs include new and renovated systems as well as new technology deployment. Ensure designs optimize the total equipment life cycle
  • Develop and approve procedures for the safe, efficient, and effective operation of systems
  • Ensure the delivery of system maintenance plans including Computerized Maintenance Management System database build-out, spare parts identification and stocking strategies, and maintenance plans
  • Contribute to sustainability initiative development, planning and execution aligned with business strategy and commitments
  • Connect with state and local utility companies to identify and understand available incentives for implementing energy and water reduction projects or pilot project opportunities
  • Collaborate with site engineering teams as well as site and corporate EHS teams to develop annual corporate sustainability reports (which include reporting and verification of global energy, water, and waste reduction projects)
  • Perform and support the measurement and verification of site sustainability projects to verify the actual energy, water, and waste reduction goals are achieved
  • Provide engineering support and complex issue resolution during build and installation processes
  • Assist sites in operational troubleshooting

Requirements:

  • Master’s degree in Engineering, Physical, or Life Sciences
  • Bachelor’s degree in Chemical or Mechanical Engineering with 2 years of engineering/scientific experience
  • Demonstrated behaviors consistent with Amgen’s Values
  • Passion and interest in environmental sustainability
  • Experience in sustainability assessments (including carbon footprint elimination, water consumption reduction, and waste minimization)
  • Experience and/or knowledge of industrial, laboratory, and relevant manufacturing environments and systems including but not limited to: boilers, chilled water plants, refrigeration, compressed air, process heating/cooling, motors, pumps, HVAC, and lighting
  • Knowledge of engineering principles to determine attainable usage reductions/savings (energy and utility costs) for various energy and water conservation measures
  • Ability to develop and support detailed engineering analysis spreadsheets to support project justification, design, development, and capital planning
  • Experience or exposure to measurement and verification (M&V) and international measurement and verification protocols such as IPMVP (International Performance Measurement and Verification Protocol)
  • Experience or exposure to Certified Energy Manager (CEM) program concepts, including energy auditing, cost analysis, and sustainability best practices
  • Successful completion of EIT with intention to pursue a PE (Professional Engineer) license or equivalent designation
  • Experience in implementing engineering projects
  • Ability to lead and deliver results in an interactive matrixed environment
  • Strong written and oral communication skills, relationship building, and leadership skills
  • Experience with general office software applications (e.g., MS Word, Excel, PowerPoint) and familiarity with popular AI tools such as Copilot and ChatGPT
  • Fluency in English, both written and spoken
What we offer:
  • Vast opportunities to learn, develop, and move up and across our global organization
  • Diverse and inclusive community of belonging, where colleagues are empowered to bring ideas to the table, take risks, and act
  • Generous AMGEN Total Rewards Plan comprising healthcare, finance, wealth, and career benefits
  • Flexible work arrangements

Additional Information:

Job Posted:
January 10, 2026

Employment Type:
Fulltime
Work Type:
Hybrid work
Icon
Amgen - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Sustainability Engineer

Junior Sustainable Process Engineer

The Sustainable Process Engineer will be part of the process design team and wil...
Location
Location
France , Saint Fons
Salary
Salary:
Not provided
adisseo.com Logo
Adisseo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Graduating with a Master's degree in process engineering
  • A first approach (including school work, internship or work-study program) with a practice of Life Cycle Assessment
  • Some experience with Process simulation tools (HYSIS, ASPEN, PRO II)
  • A practice of engineering or Life Cycle Assessment
  • Appetite and skills for data processing and analysis
  • Ability to simultaneously manage a wide variety of files and projects
  • Awareness of sustainable development, with a strong desire to reduce GHG emissions
  • Good communication skills
  • Good level of English and French
  • Must be organized, innovative, result-oriented, and customer-oriented
Job Responsibility
Job Responsibility
  • Develop and implement the LCA program
  • Carry out Life Cycle Assessments (LCA) of Adisseo products
  • Consolidate, process and analyze environmental data at product, plant, country or business unit level
  • Part of the development and implementation of a new eco-design methodology in the R&I process
  • Involved in the sustainability evaluation of innovation projects
  • Contributes to the implementation of CO2 roadmaps in the different Business Units
  • Contributes to knowledge sharing and increasing the level of empowerment on LCA at Adisseo
  • Integrated in working group for the decarbonization of the industrial plants
  • Work on feasibility study in collaboration with Process Design & Engineering Teams
  • Identify the hotspots and propose mitigation action for future projects using LCA tool
What we offer
What we offer
  • Inclusive & diverse Culture
  • Benefits: care program, vacation & paid time off, profit-sharing and performance incentives
  • Learning & Career Development: continuous training, mentoring, and learning programs, with equal access to career advancement and leadership opportunities
  • Sustainable and innovative company: work on meaningful projects using cutting-edge technology, with the freedom to innovate
  • Fulltime
Read More
Arrow Right

Senior Sustainability Engineer

The Senior Engineer Expert in Sustainability will be directly involved in the Eu...
Location
Location
Spain , Valencia
Salary
Salary:
Not provided
lomartov.com Logo
LOMARTOV
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Over 5 years of professional experience in research and innovation
  • Strong engineering knowledge basis
  • Specific knowledge in Eco-design and Life Cycle Assessment methodology
  • Ability to support the generation of valuable insights on sustainability related topics, and in preparing clear and compelling reports and presentations of results (mainly in English)
  • Bachelor’s and master’s degrees in scientific field (e.g. Biology, Biotechnology, Chemistry or Engineering among others)
  • PhD or postdoctoral activity in the field of Sustainable Development, LCA and Eco-Design, showing a strong understanding and analytical skills towards sustainability topics
  • Excellent level of Spanish and English (C1/C2 level in both languages)
  • Strong written and verbal communication skills
  • Strong ability to work in a multidisciplinary environment and adaptive capabilities to different research sectors
  • Ready to face new challenges, able to work under pressure and used to EU deadlines, ability to work effectively as a member of a team, flexibility, and high motivation
Job Responsibility
Job Responsibility
  • Developing and carrying out research activities strongly related with the sustainable evaluation and validation of novel processes and technologies
  • Conducting Life Cycle Assessment (LCA), Life Cycle Cost studies (LCC), Social LCA (sLCA) and Eco-design activities both for international projects and private contracts
  • Circular Economy modelling
  • Carbon and water footprint calculation
  • Material Flow Analysis (MFA)
  • modelling and simulation of specific processes
  • Levelized Cost Analysis
  • proposition of Material Circularity Indicators (MCI)
  • Risk Assessments in terms of Health and Safety criteria of the process/product considered
  • Recyclability assessments
What we offer
What we offer
  • Positive work environment, with a professional team in a dynamic developing company
  • Fulltime
Read More
Arrow Right

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
  • Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
  • Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
  • Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
  • Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
  • hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
  • Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
  • Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
  • Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
  • Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
  • Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
  • Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
  • Knowledge sharing, mentoring, and close collaboration with other team members and departments
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • snacks in our offices
  • Fulltime
Read More
Arrow Right

Mechanical Engineer, Sustaining

Figure is an AI robotics company developing autonomous general-purpose humanoid ...
Location
Location
United States , San Jose
Salary
Salary:
120000.00 - 180000.00 USD / Year
figure.ai Logo
Figure
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of experience in mechanical engineering
  • Bachelor’s or Master’s Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
  • Expert in using 3D CAD software to design parts with complex geometry
  • Experience designing and building prototypes
  • Experienced with simulation and analysis methodology (FEA, MATLAB etc.)
  • Ability to write and maintain clean documentation for design processes
  • Experience with electromechanical integration, such as sensors, motors, motor drivers, wire harnesses, and communication buses
Job Responsibility
Job Responsibility
  • Design parts in 3D CAD that satisfy load conditions, industrial design form factor, and durability requirements
  • Build prototypes to test assembly, range of motion, wire routing
  • Generate accurate 2D drawings using GD&T per ASME Y14.5
  • Inspect first articles, build test stands, and continuously support part on robot development platforms
  • Fulltime
Read More
Arrow Right

Zen Sustaining Engineer

Senior Development engineer to sustain different versions of the Zen product (cu...
Location
Location
India , Bangalore; Pune
Salary
Salary:
Not provided
actian.com Logo
Actian
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Computer Science, Electronic Engineering, or equivalent experience
  • Five or more years of professional experience in software development or maintenance, with in-depth debugging skills
  • In-depth knowledge of C and C++ to diagnose and analyze defects
  • User space and server side debugging on Windows and Linux operating systems
  • Experience working with file systems, transactional databases and SQL
  • Excellent problem solving and analytical skills
Job Responsibility
Job Responsibility
  • Work with product support to reproduce product related cases and escalations
  • Diagnose and resolve complex product issues
  • Participate in requirements analysis, design reviews, code review and other work related to Zen product functionality
  • Improve processes in existing development cycles to ensure that customer reported issues do not reappear
  • Create test strategies and plans encompassing a suite of reliable test cases
  • Provide input to QA engineers for building tests that verify implemented product defects
  • Debug existing code for defects found by internal and external users
  • Become an expert in how the product operates and be the first stop for customer escalations into Engineering
  • Fulltime
Read More
Arrow Right

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
  • Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
  • Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
  • Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
  • Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
  • Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Perform debug, failure analysis, and rework of electronics systems, circuits, and components
  • Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
  • Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
  • Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
  • Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
  • Assess and document design change outcomes, test results, and related information and present information to design teams and management
  • Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Senior Technical Project Manager

We are seeking an experienced and highly motivated Project Manager to join our S...
Location
Location
United States , South Jordan
Salary
Salary:
Not provided
cricut.com Logo
Cricut
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering (Mechanical Engineering, Manufacturing Engineering or Process Engineering strongly preferred)
  • Working knowledge of software/firmware and some programming background
  • Familiar with electronics, with the ability to read and understand electrical schematics and wiring diagrams
  • 2+ years in Project Management related to product development
  • 5+ years working on products and assembly lines in a Mechanical Engineering, Process or Manufacturing Engineering capacity
  • Ability to utilize various technologies and tools to effectively manage projects and provide clear and concise communications to teams and stakeholders
  • Adept in Microsoft Project, MS Excel, Jira. Proficiency in Minitab desirable
  • The ability to understand and apply statistical process control methods is highly desirable including Cpk’s, T-Tests, X-Bar/R charts, DOE’s, etc.
  • Must be willing to work in our Salt Lake City (South Jordan) office Monday through Friday each week
  • Ability to regularly travel to Asia as needed (likely 4x/yr, can include travel to Malaysia and other areas of Asia)
Job Responsibility
Job Responsibility
  • Work as the technical and programmatic focal point and facilitator for Sustaining Engineering activities in our Utah office
  • Prioritize highest value projects with US SE team and organize resources against them
  • backlog other ideas to keep SE to-do lists lean
  • Identify part, product and assembly issues quickly and work through root cause to resolution
  • Prepare budgets, purchase orders and schedules as needed for SE projects
  • Identify cost-reduction opportunities at a part, product, assembly and calibration level
  • Coordinate testing activities with engineers and the quality department to ensure product meets engineering and product specifications
  • Manage, document and confirm product changes at multiple contract manufacturers
  • check and maintain consistency of solutions/updates across multiple contract manufacturers
  • Ensure that management and stakeholders are notified of any potential schedule impacts
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer

Atelier Ten are looking to recruit experienced Senior Electrical Engineers withi...
Location
Location
United Kingdom , Glasgow; Edinburgh
Salary
Salary:
Not provided
atelierten.com Logo
Atelier Ten
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • experienced Senior Electrical Engineer
  • ability to think beyond own discipline
  • natural tendency to contribute to collaborative problem-solving in a multi-disciplinary environment
  • proactive
  • self-motivated
  • prepared to work diligently
  • demonstrating commitment, leadership, and loyalty
Job Responsibility
Job Responsibility
  • think beyond their own discipline
  • contribute to collaborative problem-solving in a multi-disciplinary environment
  • encourage the design of highly innovative and sustainable engineering solutions that incorporate a mix of technologies
  • using industry benchmarks and internal standards, ensure the delivery of considered and accurate project information within agreed budgets and timeframes
  • provide leadership to junior members of the team
  • act as a point of contact between Atelier Ten and our clients/collaborators
What we offer
What we offer
  • competitive salary
  • involvement in the design process
  • freedom to contribute ideas and make a clear personal difference
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy