CrawlJobs Logo

Supplier Industrialization Engineer - PCBA

figure.ai Logo

Figure

Location Icon

Location:
United States , San Jose

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

140000.00 - 220000.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

We are seeking a highly motivated and experienced Supplier Industrialization Engineer (SIE) with a deep specialization in Printed Circuit Board Assemblies (PCBAs) and Top Level Assemblies (TLAs) . In this critical role, you will be the technical expert responsible for ensuring the quality, reliability, and manufacturability of our PCBA components from our global supplier base. You will bridge the gap between design engineering and manufacturing, driving continuous improvement and scaling our production capabilities to meet our ambitious goals.

Job Responsibility:

  • Supplier Development & Qualification: Conduct comprehensive audits and assessments of existing and potential PCBA suppliers (domestic and international) to evaluate their manufacturing infrastructure, process controls, automation levels, and quality systems
  • Collaborate within Supply Chain and Engineering teams to define rigorous supplier selection criteria and execute sourcing strategies
  • Lead supplier onboarding, development, and risk mitigation strategies to ensure long-term quality, cost optimization, and supply chain resilience
  • Design for Manufacturability (DFM) & Assembly (DFA): Actively participate in early-stage product development, providing critical DFM/DFA feedback on PCBA designs to engineering teams
  • Work closely with design engineers to optimize PCBA layouts for manufacturability, integrating supplier-specific feedback into part and assembly designs (e.g., panelization, stencil design, soldering, AOI, ICT)
  • Ensure manufacturing best practices are embedded early in the design process
  • Process Optimization & Manufacturing Readiness: Lead the development and validation of new SMT (Surface Mount Technology) processes and technologies (e.g., fine-pitch, micro-BGA, PoP, 0201/01005 components) at supplier sites
  • Develop and implement Process Flow Diagrams (PFDs) to identify bottlenecks, improve throughput, and optimize automation
  • Drive prototyping and pilot builds to evaluate and refine PCBA manufacturing processes prior to volume ramp-up
  • Implement End-of-Line (EOL) test strategies and in-line process validation to ensure stable and repeatable quality
  • Identify and implement automation and process controls for scalable, cost-efficient PCBA manufacturing
  • Lead trials and qualifications for new solder pastes, fluxes, nozzles, and reflow profiles
  • Quality & Compliance: Collaborate with the Quality team to establish robust vendor certification processes, ensuring high-performance PCBAs
  • Implement quality controls at suppliers, pushing defect prevention upstream through root cause analysis and corrective actions (SCARs - Supplier Corrective Action Requests)
  • Deploy and monitor Statistical Process Control (SPC) methodologies, ensuring data-driven decision-making and process stability
  • Develop and implement Process Failure Mode and Effects Analysis (pFMEA) to proactively identify and mitigate risks in PCBA manufacturing
  • Lead Design of Experiments (DOE) and Gage R&R studies to validate process robustness, test equipment reliability, and measurement system accuracy
  • Own and be responsible for field quality failures, driving suppliers to implement sustainable corrective actions and lessons learned
  • Supplier Management & Performance: Determine and manage production line layout capacity by balancing cycle time and driving process flow changes at supplier sites
  • Drive continuous improvement in supplier scalability, cost, and quality performance, minimizing inspections and improving first-pass yield
  • Act as the critical-to-quality (CTQ) leadership during New Product Introductions (NPIs) for suppliers
  • Facilitate clear communication of technical requirements between suppliers and internal teams (Purchasing, Quality, Design)
  • Utilize data analytics tools to analyze process trends, identify quality issues, and drive improvements
  • Partner with suppliers to implement robust quality systems and drive operational excellence

Requirements:

  • Bachelor’s degree in Electrical Engineering, Industrial Engineering, Mechanical Engineering, or a related technical field
  • 7+ years of experience progressive experience in supplier industrialization, manufacturing engineering, or process engineering, with a strong focus on Printed Circuit Board Assembly (PCBA) and Top Level Assembly (TLA)
  • Deep understanding of PCBA manufacturing processes, including SMT, Through-Hole Technology (THT), reflow, conformal coating, underfill, washing, press fit, pin insertion, and depanelization
  • Proficiency in Design for Manufacturing (DFM) and Design for Assembly (DFA) principles
  • Strong knowledge and practical experience with quality methodologies and tools (e.g., Root Cause Corrective Action (RCCA), Fishbone, Process Mapping, 5S, SPC, pFMEA, DOE, Gage R&R)
  • Solid experience with New Product Introductions (NPIs) and project management in a manufacturing environment
  • Familiarity with industry standards such as IPC-A-600, IPC-A-610, J-STD-001
  • Experience with CAD software and PCBA layout tools
  • Excellent analytical and problem-solving skills, with the ability to interpret complex data and drive actionable insights
  • Strong communication, negotiation, and interpersonal skills to effectively collaborate with suppliers and internal cross-functional teams
  • Ability to travel domestically and internationally up to 30%, sometimes with short notice, to engage with manufacturing partners
  • Self-motivated, hands-on, and adaptable to a fast-paced, dynamic environment

Nice to have:

  • Master's degree in a relevant engineering field
  • Certifications such as ASQ CQE, CQM, CRE, CQA
  • Knowledge of Lean Manufacturing and Six Sigma methodologies (Green Belt or Black Belt certification a plus)
  • Experience in the [mention relevant industries, e.g., automotive, aerospace, consumer electronics, medical device] industry

Additional Information:

Job Posted:
December 08, 2025

Employment Type:
Fulltime
Icon
Figure - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Supplier Industrialization Engineer - PCBA

Supplier Quality Engineer

We are seeking a Supplier Quality Engineer (SQE) with strong technical expertise...
Location
Location
Malaysia , Senai, Johor
Salary
Salary:
Not provided
cricut.com Logo
Cricut
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical, Mechanical, or Mechatronics Engineering or a related technical field
  • 3–7 years of experience in supplier quality engineering, preferably in the home appliance or consumer electronics industry
  • Strong understanding of motor control systems, PCB design and testing, cable assembly standards, and PSU safety/compliance
  • Hands-on experience with diagnostic and measurement tools for electronic and electromechanical components
  • Familiarity with ISO 9001, IATF 16949, and other relevant quality standards
  • Proficient in quality tools: 8D, FMEA, Control Plans, SPC, MSA, and DOE
  • Excellent communication and problem-solving skills
  • Willingness to travel up to 70% to supplier and manufacturing sites
  • Ability to communicate in Mandarin, to support collaboration with China-based suppliers
Job Responsibility
Job Responsibility
  • Component Quality Oversight: Manage and monitor the quality of motors, PCBA, wire harnesses, and PSUs from suppliers, ensuring compliance with specifications and standards
  • Supplier Audits & Qualification: Conduct supplier audits (process, system, and product) and support supplier qualification and onboarding
  • Failure Analysis & Diagnostics: Lead root cause analysis for component failures using tools
  • Corrective & Preventive Actions: Drive 8D, 5-Why, and FMEA processes to resolve quality issues and prevent recurrence
  • Quality Metrics & Reporting: Track supplier performance using KPIs such as PPM, yield, and defect trends. Report findings and improvement plans regularly
  • Process Improvement: Collaborate with suppliers to implement Poka-Yoke, control plans, and SPC (Statistical Process Control) to improve process capability
  • Cross-Functional Collaboration: Work closely with R&D, Manufacturing, and Procurement teams to align quality expectations and resolve technical issues
What we offer
What we offer
  • Outstanding medical, dental, vision, and retirement benefits
  • Pet insurance
  • 401K match
  • Life insurance
  • Incentive programs
  • Paid time off
  • On-site massages
  • Phenomenal work-life balance
  • Employee discounts
  • Fulltime
Read More
Arrow Right
New

Quality Engineer

Etched is hiring a Quality Engineer based in the US to ensure robust quality sys...
Location
Location
United States , San Jose
Salary
Salary:
150000.00 - 210000.00 USD / Year
etched.com Logo
Etched
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 8+ years of PCBA related experience in quality engineering, supplier quality, or manufacturing quality roles
  • Proven track record working with Tier 1 US-based contract manufacturers and/or ODMs
  • Familiarity with server assembly, burn-in, and system-level test workflows
  • Strong knowledge of quality tools and methodologies (SPC, FMEA, control plans, DOE)
  • Excellent cross-functional communication skills
  • ability to drive alignment across engineering, ops, and suppliers
  • Comfortable working on-site at CM factories and resolving issues in real time
Job Responsibility
Job Responsibility
  • Lead quality assurance for US-based contract manufacturers and integrators (L6 to L10)
  • Establish and maintain incoming, in-process, and outgoing inspection processes to ensure compliance with Etched standards
  • Partner with Test Engineering to define system-level test coverage, burn-in protocols, and reliability validation
  • Drive failure analysis, root-cause investigations, and corrective/preventive actions (8D, CAPA)
  • Track, analyze, and report on quality metrics (yield, defect density, escapes, DPPM) to both engineering and operations stakeholders
  • Participate in ECO reviews, configuration changes, and NPI build reviews to enforce quality gates
  • Conduct supplier audits and ensure adherence to industry standards (ISO/AS, IPC)
  • Collaborate with Manufacturing Operations to scale line capability, training, and documentation
  • Champion continuous improvement projects across yield, throughput, and defect reduction
What we offer
What we offer
  • Medical, dental, and vision packages with generous premium coverage
  • $500 per month credit for waiving medical benefits
  • Housing subsidy of $2k per month for those living within walking distance of the office
  • Relocation support for those moving to San Jose (Santana Row)
  • Various wellness benefits covering fitness, mental health, and more
  • Daily lunch + dinner in our office
  • Fulltime
Read More
Arrow Right

Manufacturing Operations Engineer

Own and support end-to-end manufacturing operations and supply chain execution, ...
Location
Location
United States , Salt Lake City
Salary
Salary:
Not provided
passivelogic.com Logo
PassiveLogic
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Manufacturing Engineering, or related field
  • 3–7 years of experience in hardware/electronics manufacturing and operations (PCBA and mechanical assembly)
  • Solid technical understanding of manufacturing processes (SMT, injection molding, tooling, FAI)
  • Experience with quote analysis, component procurement, inventory systems, and international logistics
  • Strong analytical and critical thinking skills with the ability to solve problems independently
  • Proficiency in Excel, ERP/MRP tools, and basic data analysis
  • Willingness to travel occasionally to suppliers and contract manufacturers
Job Responsibility
Job Responsibility
  • Review and analyze quotes from contract manufacturers and suppliers
  • identify cost drivers, technical mismatches, and opportunities for optimization in collaboration with the Senior Manufacturing Engineer
  • Perform first article inspections (FAI) on mechanical and PCBA components (T0/T1/T2 samples), conduct QC checks, document findings, and support tooling approval to achieve golden samples
  • Assist in sourcing and procuring hard-to-find components
  • track lead times, manage allocations, and coordinate shipment of parts to CMs
  • Develop and maintain assembly instructions, work instructions, and process documentation
  • Support inventory management, demand forecasting, and ERP/MRP system tracking
  • Build and optimize QC processes, inspection protocols, and yield improvement initiatives
  • Manage logistics, freight forwarders, import/export compliance, tariffs/duties, and shipping documentation
  • Drive continuous improvement in operations processes and support cross-functional NPI efforts
What we offer
What we offer
  • Competitive compensation
  • Generous equity share package
  • Medical, dental and vision coverage
  • Disability and life Insurance options
  • Flex PTO
  • Team-building events
  • Free catered lunch in the office Monday — Friday
  • Free ski pass (We are at the base of Big Cottonwood Canyon)
  • Free National Park pass
  • Onsite Gym
  • Fulltime
Read More
Arrow Right
New

Senior Manager, Manufacturing Engineering

The Manufacturing Engineering team at Lunar Energy is responsible for developing...
Location
Location
United States , Mountain View
Salary
Salary:
182000.00 - 220000.00 USD / Year
lunarenergy.com Logo
Lunar Energy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • You are passionate about accelerating the adoption of renewables and improving our energy infrastructure
  • Experience with power electronics manufacturing, including battery, inverter, and PCBA manufacturing processes
  • BS in Engineering (Mechanical, Electrical, Industrial)
  • MS in Engineering preferred
  • Experience with one or more of the following types of manufacturing equipment: laser welders, leak testers, automated conveyance, robotic pick and place, vision systems.
  • 3+ years of experience managing manufacturing or process engineering teams.
  • 8+ years in a manufacturing environment developing/improving processes, designing equipment, and/or overseeing equipment rollout and buyoff.
  • Ability to manage product development work with a focus on prototyping efforts
  • Proven track record of developing and launching production processes with a strong OEE
  • Familiarity with statistical process control and analysis of quality issues
Job Responsibility
Job Responsibility
  • Provide technical and managerial support to a diverse team of manufacturing engineers responsible for process and equipment development for manual and automated lines.
  • Set and execute Lunar’s strategy around manufacturing capital equipment technologies, complexity and scale.
  • Drive DFM/A feedback with our engineering teams to optimize our designs for cost and quality at our suppliers and for final assembly.
  • Review and approve fundamental manufacturing analyses from your team including PFMEAs, work instruction, line layout, capacity evaluation, and more.
  • Provide onsite support and supervision to the installation and ramp of new manufacturing lines at our various contract manufacturing (CM) partners.
  • Develop, maintain and track a multi-million dollar capital equipment budget for our manufacturing investments.
  • Collaborate with design engineering teams, equipment vendors, and manufacturing partners to design a manufacturing process that meets our product requirements and capacity objectives.
  • Manage all process development for early phase builds and define the roadmap in order to scale them for mass production.
  • Present to executive leadership on the status of line development, capacity and ramp throughout the life of the programs.
  • Collaborate with the Supplier Quality and Global Supply Management teams to resolve part quality issues using failure analysis, root cause and corrective actions.
What we offer
What we offer
  • Medical, dental, and vision insurance for employees and dependents
  • Flexible Paid Time Off plus 10 paid holidays
  • Tax deferred 401(k) plan
  • Paid parental leave for all full time employees including 12 weeks paid parental leave for the birthing mother and 6 weeks paid parental leave for the non-birthing parent
  • Subsidized EV charging and pre-tax commuter benefits
  • Equity in a fast-growing company and participating in our employee stock program
  • Fulltime
Read More
Arrow Right

Senior Advanced Manufacturing Engineering Manager

At Formlabs, we’re building the tools that make it possible for anyone to bring ...
Location
Location
United States , Somerville
Salary
Salary:
120000.00 - 225000.00 USD / Year
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. degree in engineering
  • mechanical, manufacturing engineering, aerospace, industrial, or related/equivalent field
  • 3+ years experience in an engineering management or engineering team leadership role
  • 5+ years of technical skills, preferably experience in manufacturing engineering roles for complex electro-mechanical product industrialization at scale, including machined, sheet metal, injection molded, PCBA, linear motors, LCD, cables, and plastic components
  • Experience with remotely managed NPI and contract manufacturers, including transitioning high accuracy products from prototype to mass production
  • Expertise in production quality metrics, GD&T, and process/equipment qualification procedures
  • Proficient in methods for statistical analysis (e.g. DOE, comparison testing, Gage R&R), structured problem solving (e.g. A3, 8D, DMAIC), fault-tree), and process control (e.g. statistical process control, process capability Cp/Cpk)
  • Willing to work onsite, in a fast paced environment, and occasionally coordinate with colleagues in different time zones during late evening local hours
  • Travel to vendors, suppliers, and production facilities (mostly in China) from time to time (~10-20%)
Job Responsibility
Job Responsibility
  • Lead the activities of a team of manufacturing engineering professionals responsible for supporting an extended team of global manufacturing, supply chain, quality professionals
  • Ongoing sustainment of manufacturing lines at our contract manufacturers + transition into production and support
  • Characterize process & product failures on our manufacturing line, root cause investigations, corrective actions, and mistake-proofing at suppliers and contract manufacturers for component/module/product new builds and refurbishments
  • Own manufacturing process (e.g. assembly, printer calibration, verification testing, etc.) control and issue prevention
  • implementing tools, equipment and process methods to ensure industry-leading reliability, quality, and yield
  • Drive team collaboration and support across projects/programs as a player coach on complex engineering and operational challenges
  • Own manufacturing technical readiness as a critical member of our cross-functional NPI teams, with specific emphasis on manufacturing return of experience, producibility, cost effectiveness, industrialization
  • negotiate conflicting requirements, identify lessons-learned and DFM/DFA/DFSS opportunities and share/escalate to upstream design engineers and downstream sustaining engineers
  • Manage the details of transition into manufacturing or industrialization, including resolution of first article inspections (FAI) and product/fixture assembly issues
  • drive maturity of manufacturing readiness
What we offer
What we offer
  • Robust equity program to build future wealth through RSUs
  • Comprehensive healthcare coverage (Medical, Dental, Vision)
  • Low cost fund options in our 401K and access to advisors
  • Generous paid Parental Leave (up to 16 weeks)
  • Tenure-based paid Sabbatical Leave (up to 6 weeks)
  • Flexible Out of Office Plan – Take time when you need it
  • Ample on-site parking & pre-tax commuter benefits
  • Healthy on-site lunches, snacks, beverages, & treats
  • Regular sponsored professional development opportunities
  • Many opt-in culture events across our diverse community
  • Fulltime
Read More
Arrow Right

Senior Advanced Manufacturing Engineering Manager

At Formlabs, we’re building the tools that make it possible for anyone to bring ...
Location
Location
United States , Somerville
Salary
Salary:
120000.00 - 225000.00 USD / Year
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. degree in engineering
  • mechanical, manufacturing engineering, aerospace, industrial, or related/equivalent field
  • 3+ years experience in an engineering management or engineering team leadership role
  • 5+ years of technical skills, preferably experience in manufacturing engineering roles for complex electro-mechanical product industrialization at scale, including machined, sheet metal, injection molded, PCBA, linear motors, LCD, cables, and plastic components
  • Experience with remotely managed NPI and contract manufacturers, including transitioning high accuracy products from prototype to mass production
  • Expertise in production quality metrics, GD&T, and process/equipment qualification procedures
  • Proficient in methods for statistical analysis (e.g. DOE, comparison testing, Gage R&R), structured problem solving (e.g. A3, 8D, DMAIC), fault-tree), and process control (e.g. statistical process control, process capability Cp/Cpk)
  • Willing to work onsite, in a fast paced environment, and occasionally coordinate with colleagues in different time zones during late evening local hours
  • Travel to vendors, suppliers, and production facilities (mostly in China) from time to time (~10-20%)
Job Responsibility
Job Responsibility
  • Lead the activities of a team of manufacturing engineering professionals responsible for supporting an extended team of global manufacturing, supply chain, quality professionals
  • Ongoing sustainment of manufacturing lines at our contract manufacturers + transition into production and support
  • Characterize process & product failures on our manufacturing line, root cause investigations, corrective actions, and mistake-proofing at suppliers and contract manufacturers for component/module/product new builds and refurbishments
  • Own manufacturing process (e.g. assembly, printer calibration, verification testing, etc.) control and issue prevention
  • implementing tools, equipment and process methods to ensure industry-leading reliability, quality, and yield
  • Drive team collaboration and support across projects/programs as a player coach on complex engineering and operational challenges
  • Own manufacturing technical readiness as a critical member of our cross-functional NPI teams, with specific emphasis on manufacturing return of experience, producibility, cost effectiveness, industrialization
  • negotiate conflicting requirements, identify lessons-learned and DFM/DFA/DFSS opportunities and share/escalate to upstream design engineers and downstream sustaining engineers
  • Manage the details of transition into manufacturing or industrialization, including resolution of first article inspections (FAI) and product/fixture assembly issues
  • drive maturity of manufacturing readiness
What we offer
What we offer
  • Robust equity program to build future wealth through RSUs
  • Comprehensive healthcare coverage (Medical, Dental, Vision)
  • Low cost fund options in our 401K and access to advisors
  • Generous paid Parental Leave (up to 16 weeks)
  • Tenure-based paid Sabbatical Leave (up to 6 weeks)
  • Flexible Out of Office Plan – Take time when you need it
  • Ample on-site parking & pre-tax commuter benefits
  • Healthy on-site lunches, snacks, beverages, & treats
  • Regular sponsored professional development opportunities
  • Many opt-in culture events across our diverse community
  • Fulltime
Read More
Arrow Right

Proposal Engineer

Responsible for engineering activities related to validating customer specificat...
Location
Location
United States , Atlanta
Salary
Salary:
Not provided
scanfil.com Logo
Scanfil
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • AA, BA or BS preferred
  • Requires a Bachelor's degree in either mechanical or electrical Engineering, with 5 years’ experience with in component engineering or similar role OR minimum of 7 years’ experience in component engineering role
  • Experience with schematics and PCB and PCBA design
  • Experience in manufacturing methods and procedures, process improvement, documentation skills, process improvements
Job Responsibility
Job Responsibility
  • Validate customer provided documentation for quote feasibility prior to release of RFQ to sourcing, engineering and operations departments ensuring all specifications are present in support of a smooth quoting process
  • Support Sales, Sourcing, Engineering and Ops with RFQs
  • Assist in the migration of RFQ’s to NPI’s once the business is won
  • Design validation for manufacturability
  • Investigate, Recommend, and Implement product and process enhancements for our clients’ products in a variety of industries
  • Capable of assisting the sourcing team in finding alternative/substitution components as needed for cost savings, obsolescence, or supply shortages
  • Support the Supply Chain Team in supplier selections in consideration of quality, cost and on time delivery
  • Monitor component life cycles and recommend preventive or corrective actions to avoid production line shutdowns
  • Become well versed with tools such as Silicon Expert, Siemens Valor, BOM Connector, IFS, Scanfil SCI and other software tools as needed
  • Evaluate and qualify components to make sure they meet the product and production requirements
Read More
Arrow Right

Mechanical Engineer

We are seeking a Mechanical Engineer to contribute to a variety of machine desig...
Location
Location
United States , North Reading
Salary
Salary:
96800.00 - 154900.00 USD / Year
teradyne.com Logo
Teradyne
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum B.S. in Mechanical Engineering with at least 8 years of experience in machine design
  • Masters in Mechanical Engineering preferred
  • Takes initiative, self-motivated, and drives to design, engineer, evaluate and test medium-to-high complexity electromechanical systems, subsystems, and parts
  • Ability to quickly conceptualize ideas in a CAD environment and communicate those ideas to a broader audience
  • Consistently displays disciplined and methodical engineering rigor via design work that has analytical support and addresses the full array of requirements
  • Employ effective communication skills to influence customers, internal teammates, and suppliers worldwide
  • Proficiency in the fundamentals of machine design: FEA, tolerance analysis, precision alignment, selection of actuators, bearings, sensors and materials
  • Experience working with or designing for control systems and motion applications
  • Experience or familiarity with injection molding is preferred
  • Experience in design for manufacturing, out-sourced assembly, serviceability and safety compliance
Job Responsibility
Job Responsibility
  • Contribute to a variety of machine design and product development initiatives for our next generation System Level Test and Storage platforms
  • Create innovative, scalable technical solutions to medium-to-high complexity engineering problems
  • Work across functional boundaries to identify essential requirements, tradeoffs, and key technical risks
  • Work with product development teams from conceptualization through detailed design implementation and transfer to high-volume manufacturing
  • Works with minimal guidance and supervision towards predetermined mid and long-term goals
  • Synthesizes requirements from multiple stakeholders into discrete engineering and design tradeoffs
  • Experience in conceptualizing and communicating system architecture for complex machine design
  • Consistently collaborates with development teams in key areas through efficient communication, technical guidance, tradeoffs, project scheduling, BOM creation and change management
  • Develop industrial, automated equipment products based on sound engineering principles
  • Develop electro-mechanical packaging solutions that involve sheet metal construction, cable routing techniques, electronics-cooling strategies and manages PCBA packaging constraints
What we offer
What we offer
  • Medical
  • Dental
  • Vision
  • Flexible Spending Accounts
  • Retirement savings plans
  • Life and disability insurance
  • Paid vacation & holidays
  • Tuition assistance programs
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy