Supervisor Weight Management Center Job at American Nursing Care (Omaha)

Senior Structural Engineer

Lutech Resources is currently exploring potential candidates for an upcoming rol...

Location

India , Gurgaon

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

Bachelor’s Degree or Master’s Degree in Engineering
8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design
Preferably Registered Professional Engineer or member of professional engineering society as applicable
Seasoned knowledge of engineering standards and specifications
Good knowledge of engineering software
Able to work independently
Good working knowledge of English, both oral and written
HSE, TQM, and cost-conscious
Good technical structural knowledge
Good organizer, motivator, and supervisor

Job Responsibility

Experience in Analysis and Design of structures such as equipment foundations design and Software Knowledge of Staad Pro
Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards
Direct Engineering team as a Lead Engineer on small projects
Apply knowledge and skills to a wide range of standard and nonstandard situations
Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area
Clearly communicate and explain complex issues and work to establish understanding
Trains /mentors Engineers
Assists MOPEX offices on projects
Has a good understanding of the other engineering departments

Fulltime

Patient Experience Rep I – Ophthalmology

The Patient Experience Representative I works under close supervision to provide...

Location

United States , Needham; Worcester

Salary:

19.06 - 27.64 USD / Hour

Boston Children's Hospital

Expiration Date

Until further notice

Requirements

High School Diploma/GED
Basic customer service and computer skills
Makes use of customer service knowledge to assist patients and families in resolving problems
Conveys a positive demeanor when interacting with patients, families, and coworkers
Ability to communicate in a clear, effective manner both orally and in writing and demonstrate empathy in difficult personal situations
Ability to work with diverse internal and external constituencies
Demonstrates the ability to pay attention to detail and accuracy

Job Responsibility

Provides positive and effective customer service to patients, families, and visitors, responding to routine inquiries and involving supervisors for complex issues
Greets, screens, directs, and registers patients
enrolls patients and caregivers in the patient portal
Collaborates with referring providers and practices to manage complex patient issues
may rotate in call centers
Schedules patient encounters and procedures under supervision
monitors daily schedules and coordinates flow to optimize patient experience
Prepares for and attends shift handoffs and team huddles
Collects patient vitals (e.g., height, weight, temperature) and completes questionnaires in EMR as needed
Prepares examination rooms, assists patients, and ensures routine forms are ready for appointments

What we offer

Flexible schedules
Affordable health, vision and dental insurance
Child care and student loan subsidies
Generous levels of time off
403(b) Retirement Savings plan
Pension
Tuition and certain License and Certification Reimbursement
Cell phone plan discounts
Discounted rates on T-passes

Fulltime

Procall Supervisor

The PROCall / Call Center Phone Supervisor / Manager is responsible for the over...

Location

United States , Cayce

Salary:

Not provided

NAPA Auto Parts

Expiration Date

Until further notice

Requirements

Proven leadership or supervisory experience in a wholesale, retail, or customer support environment, preferably within parts or technical sales.
Strong interpersonal and communication skills with an ability to motivate and develop team members.
Excellent organizational, problem-solving, and decision-making abilities.
Proficient with POS systems, electronic parts catalogs, CRM/TAMS, and other relevant business systems.
Customer-oriented with demonstrated success in managing customer service excellence and issue resolution.
Ability to analyze performance data and implement process improvements.
Detail-oriented and capable of managing multiple priorities in a fast-paced environment.
Commitment to maintaining company policies, security measures, and professional standards.

Job Responsibility

Directly manages and oversees the work of all full time ProCall Agents in one or more markets, up to 15 direct reports.
Establishes departmental goals aligned with store and company objectives.
Develops, implements, and enforces service standards, call handling procedures, and performance expectations.
Exercises independent judgment in directing workflow, prioritizing tasks, and resolving operational challenges.
Monitors overall department performance and implements corrective actions as needed.
Ensures the department consistently delivers high levels of customer satisfaction and order accuracy.
Interviews, hires, and onboards ProCall Agents.
Provides training and ongoing development to enhance product knowledge, sales effectiveness, and system proficiency.
Conducts formal performance evaluations and delivers ongoing coaching and feedback.
Administers corrective action, performance improvement plans, and disciplinary measures as necessary.

Fulltime

Material Handler 1

The Material Handler I reports directly to the Material Supervisor and utilizes ...

Location

United States , Monroe

Salary:

Not provided

M.C. Dean, Inc

Expiration Date

Until further notice

Requirements

2+ years of demonstrated experience with a High School Diploma or 1+ years with an Associate’s Degree
Proficiency with electrical design build industry materials and equipment, and Logistics Service Center processes and procedures at M.C. Dean
Must have demonstrated experience and proficiency with intermediate level MS Excel and Outlook
Must have excellent reporting and tracking skills
Must demonstrate competency with managing critical tasks individually such as controlling the consignment programs, tool management, managing the lay down area, and/or loading and unloading zones
The position requires the ability to lift, carry, and move objects weighing up to 50 pounds on a regular basis
Relocates a 12 foot stepladder without assistance
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English

Job Responsibility

Receiving, verifying, and counting stock items and keeping record of the corresponding data as appropriate
Verifying specific inventory computations by comparing them to physical counts of stock
Investigating inventory discrepancies and reconciling errors accordingly
Packing and unpacking items to be stocked on shelves in material storage areas
Marking stock items using identification tags, stamps, electronic marking tools, and other labeling equipment
Cleaning and maintaining supplies, tools, equipment, and storage areas in order to ensure compliance with safety regulations
Determining proper storage methods based on stock location, turnover, environmental factors, and physical capabilities of the facility
Storing stock items in an orderly, safe and accessible manner within the warehouses, supply rooms, material storage and lay down areas
Examining and inspecting stock items for wear or defects, and subsequently reporting any damage to supervisors
Maintaining documented records, which outline the usage of stock and stock handling equipment

Fulltime

Supervisor, Warehouse Night Shift

The warehouse supervisor is responsible for managing and monitoring warehouse ac...

Location

United States , Newport Southern California

Salary:

67000.00 - 100400.00 USD / Year

Sysco

Expiration Date

Until further notice

Requirements

Bachelor's degree preferred or 3-5 years equivalent education/work experience in a distribution center
3-5 years of warehouse supervisory experience with a re-distribution/distribution center
Experience with handheld radio frequency (RF) unit
Knowledge of powered industrial trucks
Powered industrial truck certification is required upon completion of internal training and testing within the first 2 weeks of being hired
Must be familiar with OSHA regulation
Knowledge of warehouse procedures and practices
inventory control processes, procedures and practices
and inventoried product line specifications (dimensions, weight, etc.)
Excellent communication (verbal and written), interpersonal and professional interactive skills

Job Responsibility

Direct, coordinate and monitor the daily activities and performance of warehouse workers to assure compliance of standard procedures, quality, and safety
Assure quality performance through proper staffing, effective communication, and training
Manage employee performance through motivation, delegation, development, mentoring and resolving conflict
Take corrective action as necessary on a timely basis and following company policy
Conduct regular department or pre-shift meetings to foster employee engagement, communicate any changes to company policies and procedures, address employee concerns, foster idea-sharing and suggestions for improvement
Participate in staff selection, performance and compensation evaluations, corrective action and terminations, as necessary
Continuously review warehouse procedures and recommend and/or modify the operational structure to create a more efficient and productive operation
Monitor departmental expenses
Provide necessary resources to support daily activities
Suggest and implement process improvements that will increase efficiency, productivity, safety, and quality while reducing costs (i.e. overtime hours, building and machine maintenance cost)

Fulltime

Senior Structural Engineer

Job Overview: The Senior Structural Engineer uses best practices and knowledge o...

Location

India , Chennai

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

Bachelor’s Degree or Master’s Degree in Engineering
8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing detail design
Preferably Registered Professional Engineer or member of professional engineering society as applicable
Seasoned knowledge of engineering standards and specifications
Good knowledge of engineering software
Able to work independently
Good working knowledge of English, both oral and written
HSE, TQM, and cost-conscious
Good technical structural knowledge
Good organizer, motivator, and supervisor

Job Responsibility

Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards
Direct Engineering team as a Lead Engineer on small projects
Apply knowledge and skills to a wide range of standard and nonstandard situations
Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area
Clearly communicate and explain complex issues and work to establish understanding
Trains /mentors Engineers
Assists MOPEX offices on projects
Has a good understanding of the other engineering departments
Initiates interface with other disciplines to obtain input for discipline designs

Fulltime

Tmo supervisor

Supervises work activities of Traffic Management personnel engaged in the moveme...

Location

United States , Anchorage, Alaska

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

High School diploma or equivalent required
Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required
Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea, and air, data records, container management, customer service, cargo operating computer systems, or other related experience
Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains, and devices for restraint
Must possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position
Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include, as a minimum, PowerPoint, Excel, and Word programs
Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel preferred
Excellent organizational skills and the ability to effectively work under pressure and strict timelines required
Ability to maintain an effective working relationship with coworkers, including multi-national staff, and external and internal customers is required
Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC), and Computer Security (COMPUSEC)

Job Responsibility

Supervises work activities of Traffic Management personnel engaged in the movement of WRM Pre-positioned cargo via land, air, and sea
Responsible for training, establishing, and maintaining effective shipment planning functions
Monitors cargo operations using Logistics Tool Suite (LTS), Global Freight Management (GFM), Cargo Movement Operating System (CMOS), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART), and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2), and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS)
Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses, and WPM certification/recertification web-based training
Ensures all shipments comply with the International Trade and Arms Regulation (ITAR)
Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS)
Schedules work priorities based on day-to-day Traffic Management Operations, War Reserve Material (WRM) Taskers, Executive Coordination Agency (ECA) Taskers, Primary Contracting Office (PCO), and Administrative Contracting Office (ACO) Taskers
Develops work standards
identifies training deficiencies
develops training plans

Fulltime

Distribution Center Seasonal Associate

The Seasonal DC Stock Associate is primarily responsible for the accurate unload...

Location

United States , Westbrook

Salary:

Not provided

Alliance Automotive UK LV Ltd

Expiration Date

Until further notice

Requirements

Candidates must be 16 or older
have a positive attitude
be open to learning
work well with others
willingness to be a great teammate
Required to stand (stationary position) during scheduled hours
Specific vision abilities required by the job include close vision, distance vision, color vision
Ability to perform tasks requiring repetitive motion for a full shift
Repeated reaching above and/or below shoulder level frequently
While performing the duties of this job the employee is regularly required to communicate using various methods

Job Responsibility

Accurately operate a radio frequency scanning device
Efficiently and accurately process orders by packing merchandise for shipment to stores and customers
Perform general housekeeping to keep work areas clean
Properly follow company and OSHA safety procedures
Work well with others in a team environment
Ability to work in a fast paced environment
Ability to read, write, conduct business related mathematics and analyze data as required
Brings problems to the attention of the supervisor, manager, safety director or HR manager
Follows daily procedures and protocols as set forth in job orientations and trainings

Select Country

Supervisor Weight Management Center

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?