Supervisor, Automation Engineering Job at PG&E Corporation (San Ramon)

Electrical Engineer – Process Automation and Electrical Engineering

Electrical engineer is responsible for activities related to its discipline with...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in electrical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Single Line Diagrams
Load schedule/ Plant load balance
Network studies and calculations (Load flow, short circuit, stability, protection settings, harmonics, etc.)
Electrical equipment specifications for MV and LV equipment such as Motor Control Centers, switchgears, metering panels, transformers, UPSes, VFDs, motors, heaters, etc.
Earthing, lighting, tracing systems
CCTV, Public Address systems
Electrical cables routing, power distribution
Electrical layout drawings
Field installation details
Field equipment and accessories MTO

Fulltime

Instrumentation Engineer – Process Automation and Electrical Engineering

Instrumentation engineer is responsible for activities related to its discipline...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering or Bachelor’s Degree in Chemical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Technical specifications / data sheets for field and control room instrumentation
Sizing and calculation of flow elements, control, and safety valves
Process hook-up sketches and relevant bill of materials
Interconnecting and wiring diagrams
Instrumentation cabling, wiring, junction boxes, power supply and distribution, UPS, and associated TCP/IP, SCADA, Modbus networking (switches, routers, Ethernet, fiber optics, etc.)
Cause & effect matrices
Interlock and control logic diagrams
Interlock and control narratives
Distributed Control Systems (DCS)
Safety Instrumented Systems (SIS)

Fulltime

Automation Engineering Intern

Automation Engineering Intern role at Hewlett Packard Enterprise. Works independ...

Location

United States , Chippewa Falls

Salary:

35.00 - 40.25 USD / Hour

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

Currently pursuing a Bachelor's degree in Manufacturing Engineering, Automation Engineering or a related technical field
Familiarity with programming languages or technical tools relevant to the role
Working knowledge in the field of manufacturing and mechanical assembly
Experience working with Microsoft Word and Excel
Familiarity with PLC, machine vision, and/or robot programming, set up and troubleshooting
Strong interest in high-tech and a passion for learning
Excellent communication and interpersonal skills
Strong problem-solving and analytical skills
Time management skills and working with strict deadlines
A collaborative, solution-focused mindset and overall sense of urgency

Job Responsibility

Help identify and troubleshoot technical issues, providing support and suggesting solutions
Assist with maintaining and updating hardware, software, and other technical systems
Participate in team activities by attending team meetings, learn about project methodologies, and collaborate effectively with colleagues
Actively engage in learning about new technologies and methodologies relevant to work
Fulfil tasks and responsibilities assigned by a supervisor in a timely and efficient manner
Participate in periodic reviews to share updates and incorporate feedback on assigned projects/initiatives
Aid in the design and/or programming of new automated solutions
Contribute to documentation of equipment, processes, and development activities

What we offer

Health & Wellbeing benefits
Personal & Professional Development programs
Unconditional Inclusion environment

Fulltime

Engineering Supervisor

This leading UK food manufacturing business operates across multiple sites and i...

Location

United Kingdom , Suffolk

Salary:

60000.00 - 65000.00 GBP / Year

Zest Food Jobs

Expiration Date

Until further notice

Requirements

Time-served or formally qualified engineer (mechanical or electrical)
Strong background in FMCG or food manufacturing maintenance
Hands-on capability balanced with leadership and people management skills
Excellent problem-solving and communication abilities
A proactive mindset with a drive for improvement and efficiency
Comfortable working in a dynamic, automated production environment

Job Responsibility

Lead, coach and develop a small team of multi-skilled engineers and technicians
Drive proactive maintenance and reliability improvement initiatives
Manage and engage external contractors for specialist maintenance and project work
Identify and justify capital investment opportunities
Collaborate closely with Operations and Process Leads to deliver productivity gains
Lead root cause analysis and defect elimination activities
Support installation and commissioning of new equipment and automation projects
Maintain safe systems of work, ensuring all engineering activities are compliant

What we offer

Attractive performance-related pay and benefits package
Genuine progression opportunities within a stable, growing business
Flexibility in working hours and supportive leadership culture

Fulltime

Electrical supervisor

Working closely with our project management team and reporting to a PM, the elec...

Location

Italy , Bergamo

Salary:

40000.00 - 55000.00 EUR / Year

CTP Team

Expiration Date

Until further notice

Requirements

Legally resident on Italian soil
At least 6+ years prior experience in electrical engineering within technical departments of companies operating in electrical, mechanical, automation, industrial plant engineering, or similar sectors
Degree in Electrical Engineering, Industrial Automation, Mechatronics, or a post-diploma technical qualification supported by relevant experience
Good working knowledge of English
Availability for frequent short on-site trips within Italy and abroad (up to 40% of working time)
Design of electrical systems: medium-voltage installations, MV/LV transformers, LV switchboards, motor control centers (MCC), single-line diagrams, supervision and control systems for electrical plants
Knowledge of power generation systems
Preparation of procurement requests for MV/LV electrical systems and switchboards
Technical alignment with suppliers to obtain consolidated offers for MV/LV switchboards
Management and development of MV/LV electrical system and switchboard projects

Job Responsibility

Manage the electrical scope of supply within assigned projects, maintaining a proactive and direct relationship with clients and suppliers
Identify all opportunities to reduce electrical supply costs
Ensure that the project scope is completed in accordance with contractual obligations, coordinating closely with the procurement department and external suppliers
Be responsible for anticipating potential risks related to the electrical portion of the project and defining corrective actions where needed
Review layouts and technical drawings, verifying compatibility with the mechanical design and monitoring the proper execution of development activities
Manage the preparation of all key project documentation, including single-line diagrams, lists (consumption lists, cable lists, etc.), layouts, and any additional schematics required for the successful progress of the project
Be proactively involved from the bidding phase through project delivery, commissioning, and final handover to clients
Provide support to the after-sales department when required
Assist the sales department during tendering activities by estimating costs and timelines for potential projects

What we offer

Smart Working up to 1 day a week available for the position after probation
Flex Time, 07.00-10.00 /16.00-19.00 Monday to Friday
Electronic Ticket Restaurant: € 8
Extra Care-giving Hours: 16 hours a year paid leaves for care-giving/volunteering activities
Welfare Plan: € 200,00 a year net value as current Regulation
Medical examinations: paid leave up 2 hours for each medical examination
Daily travel allowance when away

Fulltime

Principal Engineer-Nuclear

As a Principal Engineer - Nuclear you will be taking on a new challenge in guidi...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering Physics, Engineering Science, Electrical, Mechanical or Mechatronics Engineering or equivalent
A professional engineering license
10+ years of experience in nuclear automated tooling design, development and qualifications of automated systems custom machinery or industrial equipment
Thorough understanding of nuclear tooling engineering and field issues, precision engineering principles and ASME codes is necessary
In-depth knowledge of and use of nuclear equipment quality standards (NQA-1, ASME BPV Section III)
Thorough understanding of machine design and build, machine controls, structured problem solving, statistical analysis, and precision engineering principles
Good written and oral communication skills and ability to lead or work as part of a multi-disciplinary project team
Will be required to travel to licensed Nuclear Facilities and be registered as a Radiation Worker (US) and/or a Nuclear Energy Worker (Canada)
Must be capable of obtaining Security Clearance at nuclear sites globally
Work in conformance with divisional health, safety and environmental procedures and compliance to legislative requirements

Job Responsibility

Technical Leadership and Subject Matter Expertise: Provides Subject Matter Expert oversight and opinion to support ATS’s business in key focus areas for nuclear (e.g., SMRs, PWRs, Fuel Fabrication)
Use technical knowledge of company's and/or industry technologies to lead the development of successful approaches to critical problems and broad design issues
Participate and, where needed, lead the development of innovative programs to meet nuclear industry demand
Engineering Direction and Support: Provide technical direction, advice, and guidance to the engineering/design departments
Provide engineering support to solve problems and advance innovation including providing conceptual and detail designs, performing calculations and analysis, providing evaluation, and defining and participating in testing
Provides, and coordinates other disciplines as needed, to solve equipment problems
Project and Proposal Development: Support nuclear projects by participating in design reviews and providing solutions to complex problems
Support Applications Engineering to prepare concepts for new proposals
Prepares concept designs and assembles preliminary pricing for critical proposals
Working with project managers, assists driving successful completion of the work to meet design requirements and maintain cost and schedule

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Competitive starting salaries
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits

Senior Mechanical Engineer - Nuclear

As a Senior Mechanical Designer Engineer - Nuclear you will be taking on a new c...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Mechanical Engineering, Science or Technology
Professional Engineer License would be an asset
10+ years of experience in engineering design, development and qualifications of automated systems custom machinery or industrial equipment
5+ years of experience in nuclear tooling development and testing, preferably including field support and experience
In-depth knowledge of and use of nuclear equipment quality standards (NQA-1, ASME BPV Section III)
Thorough understanding of machine design and build, machine controls, structured problem solving, statistical analysis, and precision engineering principles
Good written and oral communication skills and ability to lead or work as part of a multi-disciplinary project team
Work in conformance with divisional health, safety and environmental procedures and compliance to legislative requirements
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor

Job Responsibility

Design and support the development of Automated Equipment for industrial and nuclear projects
Perform engineering calculations with respect to strength of materials, speeds, horsepower, temperature, pressure, force, etc. as related to machine and tool designs
Analyze engineering drawings and specifications to determine shape, dimensions, hardness, etc. in the development of equipment, processes, and products
Define tools, fixtures, and equipment to be used in fabrication and assembly of mechanical components and complete assemblies
Produce working drawings, detail drawings, and bills of materials for equipment, sub-assemblies, or products, using AutoCAD and SOLIDWORKS
Specify appropriate purchase components for mechanical assemblies and create requisitions with appropriate delivery dates
Analyze designs and systems for compliance with applicable standards (i.e., OSHA, CE, or customer-specific)
Strictly follow ASME NQA-1 Quality requirements as defined within the manual and procedures
Work cross functionally with other teams
Review electrical requirements with respect to input and output devices with electrical designers

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits
401K matching program

Senior Instrumentation Engineer

Senior Instrumentation Engineer is responsible for activities related to its dis...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering
Minimum +7/8 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Discuss with Project Manager and Head of Department the project execution strategy and project time schedule
Coordinate the discipline activities ensuring consistency with schedule, project requirements, technological requirements, safety requirements and standards defined for the project
Cooperate with other disciplines’ leaders for the project execution
Identifies deviations by contract scope of work and their impact on the project
Interface with Customer, Vendors and Manufacturers for instrumentation subjects
Provide instrumentation engineering expertise for the design and development of the project
Checks and approves the documentation related to the project before issuing
Contribute to Hazard and Operability studies (HazOp), Hazard Identification studies (HazId), risk assessment, SIL assignment
Provide technical support to procurement department (Technical Bid Evaluation)
Provides feedback to the Head of Department to increase efficiency of the team assigned to the project

Fulltime

Supervisor, Automation Engineering

PG&E Corporation

Location:
United States , San Ramon

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
May 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Supervisor, Automation Engineering

Electrical Engineer – Process Automation and Electrical Engineering