Stationary Equipment Technician Job at Aramark (Moore)

Stationary Equipment Technician

The Stationary Equipment Technician is responsible for the operation, repair, ma...

Location

United States , Warsaw

Salary:

Not provided

Aramark

Expiration Date

Until further notice

Requirements

Must have a diploma/certification in a related field or two (2) years' experience
Previous experience as a Stationary Equipment Technician or related role preferred
A high school degree or G.E.D. is required
Experience using multi-meters, ammeters, soldering, brazing, and electrical component writing
Ability to demonstrate excellent customer service and interpersonal skills, both written and verbal
Demonstrate organizational skills, accuracy, and attention to detail

Job Responsibility

Thoroughly inspects, maintains, and changes cylinders on various gases located in cylinder room
Repairs all types of valves, traps, separators, strainers, and all other plumbing devices including fixtures
Performs cutting and threading of pipes, sweating of copper tubing, and other types of plumbing connections (flared, compression, PVC, Vic, etc.)
Performs general carpentry and construction duties as assigned
Responsible for performing minor electrical work
Maintains the dishwasher, steam kettles, and various gas appliances
Maintains critical inventory needed to keep operations running including maintaining and accounting for tools used
Completes preventative maintenance as scheduled and keeps record of having done so
Maintains a friendly, efficient, positive customer service attitude toward customers, clients, and co-workers. Is anticipative of/responsive to customer needs

New

Lead Industrial Maintenance Technician

Bemana is searching for a Lead Industrial Maintenance Technician in Conyers, GA ...

Location

United States , Conyers

Salary:

25.00 - 40.00 USD / Hour

Bemana

Expiration Date

Until further notice

Requirements

Will perform preventative maintenance inspection, services, and adjustments in routine daily maintenance on plant production assets
Perform repairs and preventative maintenance checks and services per company policies and procedures
Troubleshoots mechanical, electrical, air, and hydraulic systems
Determines the extent of corrective action and repair parts required to correct malfunctions
Knows and applies required company safety procedures
Repair and lubricate machines and equipment
Assemble and install equipment using hand tools and power tools
Examine parts for defects such as breakage and excessive wear
Observe and test the operation of machinery and equipment to diagnose malfunctions, using voltmeters and other testing devices
Operate newly repaired machinery and equipment to verify the adequacy of repairs

Job Responsibility

Will perform preventative maintenance inspection, services, and adjustments in routine daily maintenance on plant production assets
Perform repairs and preventative maintenance checks and services per company policies and procedures
Troubleshoots mechanical, electrical, air, and hydraulic systems
Determines the extent of corrective action and repair parts required to correct malfunctions
Knows and applies required company safety procedures
Repair and lubricate machines and equipment
Assemble and install equipment using hand tools and power tools
Examine parts for defects such as breakage and excessive wear
Observe and test the operation of machinery and equipment to diagnose malfunctions, using voltmeters and other testing devices
Operate newly repaired machinery and equipment to verify the adequacy of repairs

What we offer

Profit-Sharing
Bonus Programs
Medical, Dental, &Vision Insurance
401K Matching (100% of the first 3%, 4th and 5th percent we match 50%.)
Flexible Spending
Paid Time Off

Fulltime

Structures Liaison

The Structures Liaison position will function primarily as a subject matter expe...

Location

United States , Mojave

Salary:

50.00 - 75.00 USD / Hour

Scaled Composites

Expiration Date

Until further notice

Requirements

Must have the ability to read and interpret systems installation drawings, blue prints and verbal instructions
Must be able to obtain and maintain a DOD security clearance. Must be able to gain access to ALL Scaled programs to help support the technical transfer, training, problem solving required of the position organizational, multi-tasking and time management skills
Excellent verbal and written communication skills.
Excellent interpersonal and customer service skills.
Excellent organizational skills and attention to detail.
Excellent time management skills with a proven ability to meet deadlines.
Strong analytical and problem-solving skills.
Strong supervisory and leadership skills.
Ability to prioritize tasks and to delegate them when appropriate.
Ability to function well in a high-paced and at times stressful environment.

Job Responsibility

Advising and applying technical knowledge, judgment and creative problem solving to resolve technical issues, mentor and teach.
Routinely working with Project Structural Engineers by contributing to the conceptual design of an aircraft’s structure and intimately understanding the technical data in order to better support program manufacturing and aid in training.
Assisting in the following: supporting training, helping identify and developing new area leads / technicians. Advising on best practices and lessons learned across the company as a whole.
Providing guidance and supporting to all programs on proper manufacturing techniques of aircraft structures. Helping troubleshoot and resolving manufacturing and assembly challenges and issues
visiting all of Scaled programs to survey for issues and good practices.
Ensuring deficient craftsmanship issues are being identified throughout all Scaled manufacturing areas and tie them back into opportunities to support training.
Assisting in researching and identifying proper materials, manufacturing and assembly techniques, needed equipment, and experience levels and talents of shop fabrication personnel.
Supporting all Operations leadership with technical advice and updates that would pertain to each functional area (EH&S, Facilities, Manufacturing, Materials and Processing, Director of Manufacturing, etc.)
Establishing good relationships with all employees to help instill the Scaled culture and foster a team atmosphere that welcomes questions. In particular focusing on building a good working relationship with the Systems Liaison, EH&S Manager, Facilities Manager, Systems Manufacturing Manager, Manufacturing Team and Development Team.

What we offer

100% Paid Benefits and 401k Matching
Relocation assistance may be available

Fulltime

Stationary Engineer, Sewage Plant

San Francisco International Airport (SFO) is seeking a dynamic journey-level Sta...

Location

United States , San Francisco

Salary:

138528.00 USD / Year

City and County of San Francisco

Expiration Date

Until further notice

Requirements

Four (4) years of verifiable journey-level Stationary Engineer, Plant Operator and/or Plant Mechanic experience in the operation, maintenance, and repair of a variety of mechanical and electrical pumping, heating, air-conditioning, ventilating, and related plant machinery of wastewater treatment plant
government establishment
hospital
industrial, production, or commercial building
Completion of a recognized four-year Stationary Engineer Apprenticeship Program
Graduation from a recognized four-year Maritime Academy with a degree in Engineering or Technology
Possession of at least a 3rd Assistant Marine Engineer's License of any unrestricted horsepower
Possession of an FAA Airframe or Power Plant Certificate AND four (4) years of verifiable experience in an Airframe or Powerplant mechanic or maintenance technician capacity that utilizes the certificate
Possession of a valid driver's license
Grade I or higher California Wastewater Treatment Plant Operator Certificate or Grade I or higher California Water Environment Mechanical Technology Certificate

Job Responsibility

Makes regular visual, audio, olfactory and tactile inspections and/or manual tests of all plant machinery and equipment, including auxiliary equipment, in an assigned area or pumping station, maintaining logs and records of required maintenance, completed maintenance, equipment and work order history by taking periodic readings of gauges and meters to ensure that sewage plant is working safely, efficiently and properly
and to provide an accurate record of maintenance, preventive maintenance, equipment, and work order history
Performs a variety of manual tasks requiring the handling of equipment exposed to raw sewage
collects and performs simple assessments of raw sewage and chemical samples on prescribed schedule at specific locations by making chemical and physical assessments to assess the efficiency of the treatment processes and to ensure compliance with the NPDES Permit
Operates, inspects, maintains, overhauls and makes major and minor repairs to wide variety of pumping, heating, ventilating, process machinery and equipment in a wastewater treatment plant or pumping station, including pumps, bar racks, grit collectors, conveyors and washers, chlorinators, evaporators and storage tanks, sludge collectors, drive units, deodorizing equipment and a wide variety of metering and recording devices to assure the safety and efficiency of equipment and facilities
includes lubricating and greasing machinery and equipment
cleaning and maintaining machinery, equipment and facility to ensure safety and equipment reliability
Inspects sewage pipelines, tanks and gates to check for the condition of equipment, for infiltration and blockage of debris and build-up of mineral deposits, etc., by draining tanks, by monitoring pressure and flow indicators and by visual inspection to determine any problem areas to ensure proper operation
Operates, inspects and maintains solids treatment and flocculating chemical systems by monitoring and adjusting flow indicators or controllers, by visual inspection and by analysis of samples to ensure optimum treatment
Operates, inspects and maintains disinfection and dechlorination systems by performing tests and analyzing sample to determine proper chemical dosages to ensure that effluent or final discharge meets Regional and State pollution control requirement

Fulltime

Maintenance Technician

The GROWMARK lubricant manufacturing facility, located in Council Bluffs, Iowa, ...

Location

United States , Council Bluffs

Salary:

24.40 - 32.64 USD / Hour

GROWMARK FS, LLC

Expiration Date

Until further notice

Requirements

Normally requires a high school diploma or equivalent
Requires related experience and/or training to demonstrate the ability to repair and maintain company machinery and equipment
Proven professional communication and customer service skills and the ability to comprehend instructions and communicate one-on-one and in small groups with customers and other employees
Demonstrated time management and basic math skills
Proven ability to work independently and in a team-oriented environment
Understanding of computer skills as they relate to the mechanic position
Ability to use hand tools and power tools
Ability to frequently move up to 100 lbs
Ability to ascend/descend ladders and stairs, and position self into awkward or confined spaces
Ability to remain in a stationary position and move about for prolonged periods

Job Responsibility

Perform preventative maintenance on all machines and equipment
Assist with maintaining the PM system
Troubleshoot routine mechanical problems
Apply mechanical theory in an industrial setting to monitor fluid systems
Monitor the general operation of steam generation equipment
Assists with coordinating with outside vendors on larger or warranted repair projects
Maintains a log of all repairs and maintenance performed
Responsible for maintaining company equipment according to company standards, adheres to the company Uniform Policy, and maintains the appropriate professional image
May serve on the location Safety Committee and adhere to company environmental health and safety policies and training
Follows GROWMARK's Code of Conduct and Corporate Compliance Program, Environmental Health and Safety, OSHA and DOT policies and procedures, as they apply

What we offer

Pension
401(k) & Employer Match
Medical, Dental, Vision
HSA & Employer Contributions
Life Insurance
Disability
Identity Protection

Fulltime

Industrial Maintenance Technician

Bemana is searching for a Industrial Maintenance Technician in Fombell, PA to jo...

Location

United States , Fombell

Salary:

26.00 - 38.00 USD / Hour

Bemana

Expiration Date

Until further notice

Requirements

Will perform preventative maintenance inspection, services, and adjustments in routine daily maintenance on plant production assets
Perform repairs and preventative maintenance checks and services per company policies and procedures
Troubleshoots mechanical, electrical, air, and hydraulic systems
Determines the extent of corrective action and repair parts required to correct malfunctions
Knows and applies required company safety procedures
Repair and lubricate machines and equipment
Assemble and install equipment using hand tools and power tools
Examine parts for defects such as breakage and excessive wear
Observe and test the operation of machinery and equipment to diagnose malfunctions, using voltmeters and other testing devices
Operate newly repaired machinery and equipment to verify the adequacy of repairs

Job Responsibility

Will perform preventative maintenance inspection, services, and adjustments in routine daily maintenance on plant production assets
Perform repairs and preventative maintenance checks and services per company policies and procedures
Troubleshoots mechanical, electrical, air, and hydraulic systems
Determines the extent of corrective action and repair parts required to correct malfunctions
Knows and applies required company safety procedures
Repair and lubricate machines and equipment
Assemble and install equipment using hand tools and power tools
Examine parts for defects such as breakage and excessive wear
Observe and test the operation of machinery and equipment to diagnose malfunctions, using voltmeters and other testing devices
Operate newly repaired machinery and equipment to verify the adequacy of repairs

What we offer

Profit-Sharing
Bonus Programs
Medical, Dental, & Vision Insurance
401K Matching (100% of the first 3%, 4th and 5th percent we match 50%.)
Flexible Spending
Paid Time Off

Fulltime

Process Operator

Petro-Canada Lubricants Inc. (PCLI), an HF Sinclair company, located in Mississa...

Location

Canada , Mississauga

Salary:

44.51 CAD / Hour

HF Sinclair

Expiration Date

Until further notice

Requirements

Completion of required educational program
Previous experience in a manufacturing operations environment
Successful completion of Chemical Engineering Technology or Power Engineering
Minimum Fourth-Class Stationary Engineering certification, with preference given to those with higher certification
Demonstrated safety-consciousness
Must have the physical capabilities to safely perform all essential aspects/responsibilities of an operators position, including effective emergency response
Demonstrated problem-solving/analytical skills
Must possess a valid Drivers License
Must possess a positive attitude, be a self-starter with a willingness to become an integral part of a process Shift Team that functions in a dynamic environment
As a condition of continued employment, the successful applicant must progress through the PBP Technician levels as per the CBA and achieve certification as a Second-Class Stationary Engineer

Job Responsibility

Maintain effective communications (i.e. shift change, intra-shift team)
Draw samples as scheduled and test as required
Perform routine operating tasks (monitor levels, temperatures, pressures, etc.)
Transfer chemicals to addition tanks. Monitor and adjust injection rates
Report data to be logged to Board Operator
Monitor operating areas for abnormal conditions, (i.e. mechanical or process related)
Perform equipment care and maintenance as required
Perform routine running maintenance
Perform basic troubleshooting
Assist with major equipment switches

Fulltime

Fiber Splicing Technician III

The Fiber Splicing Technician splices, tests, troubleshoots, and repairs fiber o...

Location

United States , Kansas City

Salary:

Not provided

Southeast Utilities of Georgia LLC

Expiration Date

Until further notice

Requirements

Ability to do physical labor, climb ladders and poles, work in confined spaces, etc.
Ability to read blueprints for job specifications in placement of cables, location of utilities, etc.
Must be able to distinguish between different colors for connection of fibers
Must be a self-starter and internally motivated to achieve corporate, department, and personal objectives
Must have excellent interpersonal communication skills (oral and written) and be a team player
Must possess excellent problem solving and decision-making skills
Ability to use basic math skills to compute measurements, figure ohms, timecards, etc.
Ability to listen and to follow directions
Must be organized, multi-tasked oriented, and maintain a neat and safe work environment
Ability to work in high places on ladders and poles

Job Responsibility

Diagnosing faulty cable plant: Identifying, detecting, and resolving issues that have known performance problems
Provide field notes and proposals to resolve issues for client’s review and approval
End-of-Line Network Testing: Testing light levels at the end of fiber networks for balanced signal between points is crucial to ensure proper signal transmission and network performance
Cable Prep: Ensure that cables are properly labeled and organized to minimize errors during installation
Build Fiber Cases and Enclosures: Constructing fiber cases and enclosures involves creating protective housings for fiber optic equipment and connections
Splice Color for Color Fibers: When splicing fiber optic cables together, technicians match the colors of the fibers to ensure that the correct fibers are connected
Cable Management: Organize the cables neatly within the enclosure, ensuring that they are properly routed and secured to prevent tangling or damage
Sealing and Placement of Case: Ensuring that the enclosure is properly closed and secured to protect the equipment and cables inside from environmental elements
Read Prints and Maps: Examine Splice Matrix and redline maps to understand fiber routes and assignments
Splice off color and multiple cables in one enclosure

What we offer

Medical, Dental & Vision Benefits
401(k) Program with a Company Match
Free Wellness Resources & Marketplace Discounts
Paid Maternity & Parental Leave
Paid Basic Life Insurance & Voluntary Options

Fulltime

Select Country

Stationary Equipment Technician

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?