Stationary Engineer Job at Illinois Department of Public Health (IDPH) (Manteno)

New

Stationary Engineer II

It's More Than a Job, It's a Calling! Position: Stationary Engineer II Location:...

Location

United States , Barrington

Salary:

30.15 - 45.25 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

Stationary Engineer license from the municipality of work location or Power Engineer certification (1st, 2nd, 3rd, 4th or 5th Class) from either the National Institute for the Uniform Licensing of Power Engineers (NIULPE) or the American Society of Power Engineers (ASOPE). Equivalent certifications from federal organizations such as the United States Navy will also be considered
Advanced training beyond High School that includes the completion of technical training
2-4 Years of Stationary Engineering
Moderate knowledge of applicable codes/regulations pertaining to assigned equipment and operations
Proficient computer skills (e.g., software relating to CMMS, building automation, and Microsoft Office)
Good communication and interpersonal skills
Must be able to sit, stand, walk, lift, squat, bend, crawl, reach above shoulders, and twist frequently throughout the workday
Must be able to lift up to 15 lbs. from floor to overhead, lift up to 50 lbs. from floor to chest-level, lift and carry up to 50 lbs. at waist height a reasonable distance
Must be able to push/pull with 50 lbs. of force
Exposure to electrical and mechanical hazards and therefore knowledge of safety precautions

Job Responsibility

Works within clearly defined standard operating procedures
Operates all campus heating, ventilation and air conditioning (HVAC) equipment including boilers, steam absorption and centrifugal chillers, cooling towers, fans, pumps and systems in a manner that optimizes efficiency, safety, and occupant comfort per department policies and procedures with moderate level of guidance/assistance
Maintains accurate records and reports on all equipment startup, failures, problems, work in progress and completed work through logbooks and computerized maintenance management system (CMMS) with moderate level of guidance/assistance
Proficient level of skill to utilize BAS as a tool for both monitoring and controlling HVAC equipment. Responds to alarms in a timely and correct manner. Optimizes operation using trending reports as appropriate
Proficient level of skill to perform preventive maintenance on HVAC and other equipment as assigned per established procedures including inspection, cleaning, lubrication, adjustment, testing, flushing, minor repairs, rebuilding and replacing parts/components to ensure that systems remain within the established operating parameters
Proficient level of skill to troubleshoot issues with HVAC equipment determine the root cause in a timely manner. Executes repairs or installations with minimal impact to the hospital and patient care. Appropriately requests assistance as warranted by the situation
Responds to building occupant complaints in a timely and professional manner and takes appropriate corrective action. Keeps requester appraised of the status of corrective action
Maintains current daily logs, preventive maintenance records and equipment repair files to comply with local, state and federal regulatory requirements as directed
Performs routine general maintenance including painting, plumbing, carpentry, equipment testing and repair, ventilation, lighting, electrical, grounds keeping and snow removal. Performs repairs on a large variety of facility systems such as mechanical, electrical, building systems and other critical systems with moderate level of guidance/supervision
Provides timely and proper response to assigned service calls, work orders and preventative maintenance to maintain a safe and efficient environment. Documents all tasks and work time on the CMMS

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program

Fulltime

Stationary Engineer III

It's More Than a Job, It's a Calling! Position: Stationary Engineer III. Locatio...

Location

United States , Oak Lawn

Salary:

33.05 - 49.60 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

Stationary Engineer license from the municipality of work location or Power Engineer certification (1st, 2nd, 3rd, 4th or 5th Class) from either the National Institute for the Uniform Licensing of Power Engineers (NIULPE) or the American Society of Power Engineers (ASOPE). Equivalent certifications from federal organizations such as the United States Navy will also be considered
Valid Driver's License
Advanced training beyond High School that includes the completion of technical training
4 or more Years of Stationary Engineering Experience
Advanced knowledge of applicable codes/regulations pertaining to assigned equipment and operations
Advanced computer skills (e.g., CMMS, building automation, and Microsoft Office)
Strong communication and interpersonal skills
Must be able to sit, stand, walk, lift, squat, bend, crawl, reach above shoulders, and twist frequently throughout the workday
Must be able to lift up to 15 lbs. from floor to overhead, lift up to 50 lbs. from floor to chest-level, lift and carry up to 50 lbs. at waist height a reasonable distance
Must be able to push/pull with 50 lbs. of force

Job Responsibility

Works within clearly defined standard operating procedures
Operates all campus heating, ventilation and air conditioning (HVAC) equipment including boilers, steam absorption and centrifugal chillers, cooling towers, fans, pumps and systems in a manner that optimizes efficiency, safety, and occupant comfort per department policies and procedures with minimal to no guidance/assistance
Maintains accurate records and reports on all equipment startup, failures, problems, work in progress and completed work through logbooks and computerized maintenance management system (CMMS) with minimal to no guidance/assistance
Advanced level of skill to utilize BAS as a tool for both monitoring and controlling HVAC equipment. Responds to alarms in a timely and correct manner. Optimizes operation using trending reports as appropriate
Advanced level of skill to perform preventive maintenance on HVAC and other equipment as assigned per established procedures including inspection, cleaning, lubrication, adjustment, testing, flushing, minor repairs, rebuilding and replacing parts/components to ensure that systems remain within the established operating parameters
Advanced level of skill to troubleshoot complex issues with HVAC equipment determine the root cause in a timely manner. Executes repairs or installations with minimal impact to the hospital and patient care. Appropriately requests assistance as warranted by the situation
Intermediate knowledge of medical gas systems
Responds to building occupant complaints in a timely and professional manner and takes appropriate corrective action. Keeps requester appraised of the status of corrective action
Maintains current daily logs, preventive maintenance records and equipment repair files to comply with local, state and federal regulatory requirements with minimal to no direction
Performs routine general maintenance including painting, plumbing, carpentry, equipment testing and repair, ventilation, lighting, electrical, groundskeeping and snow removal. Performs repairs on a large variety of facility systems such as mechanical, electrical, building systems and other critical systems with minimal to no guidance/assistance Provides timely and proper response to assigned service calls, work orders and preventative maintenance to maintain a safe and efficient environment. Documents all tasks and work time on the CMMS

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program
Premium pay such as shift, on call, and more based on a teammate's job
Incentive pay for select positions
Opportunity for annual increases based on performance

Fulltime

Stationary Engineer III

Registry/PRN - scheduled on-call, as needed, to help fill in for departmental ga...

Location

United States , Oak Lawn

Salary:

33.05 - 49.60 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

Stationary Engineer license from the municipality of work location or Power Engineer certification (1st, 2nd, 3rd, 4th or 5th Class) from either the National Institute for the Uniform Licensing of Power Engineers (NIULPE) or the American Society of Power Engineers (ASOPE). Equivalent certifications from federal organizations such as the United States Navy will also be considered.
Valid Driver's License
Advanced training beyond High School that includes the completion of technical training.
4 or more Years of Stationary Engineering Experience
Advanced knowledge of applicable codes/regulations pertaining to assigned equipment and operations
Advanced computer skills (e.g., CMMS, building automation, and Microsoft Office)
Strong communication and interpersonal skills
Must be able to sit, stand, walk, lift, squat, bend, crawl, reach above shoulders, and twist frequently throughout the workday.
Must be able to lift up to 15 lbs. from floor to overhead, lift up to 50 lbs. from floor to chest-level, lift and carry up to 50 lbs. at waist height a reasonable distance.
Must be able to push/pull with 50 lbs. of force.

Job Responsibility

Works within clearly defined standard operating procedures.
Operates all campus heating, ventilation and air conditioning (HVAC) equipment including boilers, steam absorption and centrifugal chillers, cooling towers, fans, pumps and systems in a manner that optimizes efficiency, safety, and occupant comfort per department policies and procedures with minimal to no guidance/assistance.
Maintains accurate records and reports on all equipment startup, failures, problems, work in progress and completed work through logbooks and computerized maintenance management system (CMMS) with minimal to no guidance/assistance.
Advanced level of skill to utilize BAS as a tool for both monitoring and controlling HVAC equipment. Responds to alarms in a timely and correct manner. Optimizes operation using trending reports as appropriate.
Advanced level of skill to perform preventive maintenance on HVAC and other equipment as assigned per established procedures including inspection, cleaning, lubrication, adjustment, testing, flushing, minor repairs, rebuilding and replacing parts/components to ensure that systems remain within the established operating parameters.
Advanced level of skill to troubleshoot complex issues with HVAC equipment determine the root cause in a timely manner. Executes repairs or installations with minimal impact to the hospital and patient care. Appropriately requests assistance as warranted by the situation.
Intermediate knowledge of medical gas systems.
Responds to building occupant complaints in a timely and professional manner and takes appropriate corrective action. Keeps requester appraised of the status of corrective action.
Maintains current daily logs, preventive maintenance records and equipment repair files to comply with local, state and federal regulatory requirements with minimal to no direction.
Performs routine general maintenance including painting, plumbing, carpentry, equipment testing and repair, ventilation, lighting, electrical, groundskeeping and snow removal. Performs repairs on a large variety of facility systems such as mechanical, electrical, building systems and other critical systems with minimal to no guidance/assistance Provides timely and proper response to assigned service calls, work orders and preventative maintenance to maintain a safe and efficient environment. Documents all tasks and work time on the CMMS.

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program

Parttime

Stationary Engineer III

Registry/PRN - scheduled on-call, as needed, to help fill in for departmental ga...

Location

United States , Oak Lawn

Salary:

33.05 - 49.60 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

Stationary Engineer license from the municipality of work location or Power Engineer certification (1st, 2nd, 3rd, 4th or 5th Class) from either the National Institute for the Uniform Licensing of Power Engineers (NIULPE) or the American Society of Power Engineers (ASOPE). Equivalent certifications from federal organizations such as the United States Navy will also be considered
Valid Driver's License
Advanced training beyond High School that includes the completion of technical training
4 or more Years of Stationary Engineering Experience
Advanced knowledge of applicable codes/regulations pertaining to assigned equipment and operations
Advanced computer skills (e.g., CMMS, building automation, and Microsoft Office)
Strong communication and interpersonal skills
Must be able to sit, stand, walk, lift, squat, bend, crawl, reach above shoulders, and twist frequently throughout the workday
Must be able to lift up to 15 lbs. from floor to overhead, lift up to 50 lbs. from floor to chest-level, lift and carry up to 50 lbs. at waist height a reasonable distance
Must be able to push/pull with 50 lbs. of force

Job Responsibility

Works within clearly defined standard operating procedures
Operates all campus heating, ventilation and air conditioning (HVAC) equipment including boilers, steam absorption and centrifugal chillers, cooling towers, fans, pumps and systems in a manner that optimizes efficiency, safety, and occupant comfort per department policies and procedures with minimal to no guidance/assistance
Maintains accurate records and reports on all equipment startup, failures, problems, work in progress and completed work through logbooks and computerized maintenance management system (CMMS) with minimal to no guidance/assistance
Advanced level of skill to utilize BAS as a tool for both monitoring and controlling HVAC equipment. Responds to alarms in a timely and correct manner. Optimizes operation using trending reports as appropriate
Advanced level of skill to perform preventive maintenance on HVAC and other equipment as assigned per established procedures including inspection, cleaning, lubrication, adjustment, testing, flushing, minor repairs, rebuilding and replacing parts/components to ensure that systems remain within the established operating parameters
Advanced level of skill to troubleshoot complex issues with HVAC equipment determine the root cause in a timely manner. Executes repairs or installations with minimal impact to the hospital and patient care. Appropriately requests assistance as warranted by the situation
Intermediate knowledge of medical gas systems
Responds to building occupant complaints in a timely and professional manner and takes appropriate corrective action. Keeps requester appraised of the status of corrective action
Maintains current daily logs, preventive maintenance records and equipment repair files to comply with local, state and federal regulatory requirements with minimal to no direction
Performs routine general maintenance including painting, plumbing, carpentry, equipment testing and repair, ventilation, lighting, electrical, groundskeeping and snow removal. Performs repairs on a large variety of facility systems such as mechanical, electrical, building systems and other critical systems with minimal to no guidance/assistance Provides timely and proper response to assigned service calls, work orders and preventative maintenance to maintain a safe and efficient environment. Documents all tasks and work time on the CMMS

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program

Parttime

Engineering Manager

This is where your expertise helps people. You are a problem solver. Complex pro...

Location

Canada , Alliston

Salary:

147200.00 - 197200.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Engineering
Experience leading an Engineering group within a highly regulated manufacturing environment
Project engineering/management from design to implementation
Experience in leading diverse technical resources across a complex organization
Demonstrated experience coaching, developing and leading a team of technical people
Minimum of 8 years’ technical leadership (e.g. Engineering, Maintenance, Operations) and project management experience in a highly regulated environment
High degree of innovation, skill and proficiency in various broad phases of engineering
Ability to manage through a matrix environment to achieve results in a timely manner.
Process oriented and customer focused.
Strong written and oral communication skills, negotiation skills, ability to work with all levels of the organization.

Job Responsibility

Manage process engineers, Automation team, critical systems and Facilities with 15 direct reports.
Create and maintain an environment where team members experience personal and professional growth and become a more self-directed team through regular feedback and coaching
Responsible for ensuring project implementation, and improvements are executed in a timely, efficient manner to support plant goals of OEE, Project Deadlines, safety, quality, and cost
Responsible for overall management (including multi-million-dollar budgets) of project timelines associated with generating equipment design specifications, procurement, design of experiments, factory acceptance testing, installation, coordination of validation activities, standard operating procedure (SOP) generation, and implementation in functional areas
Provide review and approval of Engineering Work Orders, Master Change Controls, Exception Reports, Technical Summaries, Validation protocols, expense approvals and Capital Requests.
Lead the capital planning process and create business cases and CER’s as required for presentation to senior leadership.
Establish project requirements, vendor contracts, design and implementation plans in conjunction with other plant stakeholders.
Oversee and develop capital equipment budgets, value improvement projects and equipment/process optimization
Ensure departmental compliance with change controls and validation protocols.
Utilize Lean principles to manage the successful completion of departmental tasks within the boundaries of safety, quality, time, and budget.

Engineering Manager

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

Canada , Alliston

Salary:

147200.00 - 197200.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Engineering
Experience leading an Engineering group within a highly regulated manufacturing environment
Project engineering/management from design to implementation
Experience in leading diverse technical resources across a complex organization
Demonstrated experience coaching, developing and leading a team of technical people
Minimum of 8 years’ technical leadership (e.g. Engineering, Maintenance, Operations) and project management experience in a highly regulated environment
High degree of innovation, skill and proficiency in various broad phases of engineering
Ability to manage through a matrix environment to achieve results in a timely manner
Process oriented and customer focused
Strong written and oral communication skills, negotiation skills, ability to work with all levels of the organization

Job Responsibility

Manage process engineers, Automation team, critical systems and Facilities with 15 direct reports
Create and maintain an environment where team members experience personal and professional growth and become a more self-directed team through regular feedback and coaching
Responsible for ensuring project implementation, and improvements are executed in a timely, efficient manner to support plant goals of OEE, Project Deadlines, safety, quality, and cost
Responsible for overall management (including multi-million-dollar budgets) of project timelines associated with generating equipment design specifications, procurement, design of experiments, factory acceptance testing, installation, coordination of validation activities, standard operating procedure (SOP) generation, and implementation in functional areas
Provide review and approval of Engineering Work Orders, Master Change Controls, Exception Reports, Technical Summaries, Validation protocols, expense approvals and Capital Requests
Lead the capital planning process and create business cases and CER’s as required for presentation to senior leadership
Establish project requirements, vendor contracts, design and implementation plans in conjunction with other plant stakeholders
Oversee and develop capital equipment budgets, value improvement projects and equipment/process optimization
Ensure departmental compliance with change controls and validation protocols
Utilize Lean principles to manage the successful completion of departmental tasks within the boundaries of safety, quality, time, and budget

Licensed Stationary Engineer

Join us for this incredible opportunity to be part of our Engineering team as th...

Location

United States , New Orleans

Salary:

24.00 USD / Hour

Hyatt

Expiration Date

Until further notice

Requirements

2nd Class Stationary Engineer's License
3 years' experience working around plant operations of commercial boilers and chillers
Flexible schedule, to include weekends and holidays
Minimum of three years building maintenance experience
Hotel experience preferred
Good communication skills
Ability to read blueprints and schematics is preferred
Basic trouble-shooting skills

Job Responsibility

Oversee the operation of the Boiler and Chiller plant within the hotel
Perform all maintenance and troubleshooting, safety inspections, and repairs to equipment
Respond to any needs related to the boilers, chillers, and corresponding equipment
Perform preventive maintenance on major equipment and systems, using a windows-based computer system

What we offer

Free room nights
Discounted and Friends & Family Room Rates
Medical, Prescription, Dental and Vision Insurance
401K with company match
Paid Time Off
Holiday Pay
New child leave and personal day
Paid Family Bonding Time and Adoption Assistance
Employee Stock Purchase Plan
Discounts at various retailers – Apple, AT&T, Verizon, Headspace and many more

Fulltime

Maintenance Technician - 4th Class Power Engineer

The Maintenance Technician (MT) with 4th Class Power Engineer status will work u...

Location

Canada , Albany

Salary:

29.05 - 30.21 CAD / Hour

Atlantic Beef Products Inc.

Expiration Date

Until further notice

Requirements

Must possess 4th class Stationary Power Engineer Certification
Experience in a large-scale meat or food manufacturing/processing environment considered an asset
Able to read and interpret various schematics and drawings
Attention to detail and excellent troubleshooting skills required
Strong mechanical inclination
Superior verbal and written communications skills required
Proven self-starter with the demonstrated ability to work well independently with little supervision and as part of a team
Proficiency in various Microsoft applications and Preventative Maintenance programs considered an asset
Interacts with all levels of the organization, therefore, must possess demonstrated interpersonal skills
Able to work well under pressure while always maintaining professionalism

Job Responsibility

Troubleshoot and evaluate problems as they arise, locating source of malfunction and performing minor repairs as required on a wide variety of equipment
Inform necessary authority of malfunctions requiring major repair
Ensure the proper operation and functioning of the organization’s boilers and related equipment
Perform regularly scheduled preventative maintenance on boilers and related machinery
Conduct regular inspections of machinery and surrounding areas, making adjustments as required
Maintain a logbook of daily activities such as operations, maintenance, test results, instrument or computer interface readings and equipment malfunctions
Collaborate with the organization’s other engineers and MT’s as required to ensure safe and efficient operations
Perform regular tests to ensure proper functioning of equipment
Adjust controls and valves on equipment or computer terminal to regulate boiler operations
Maintain assigned area and equipment ensuring cleanliness and order at all times

What we offer

Competitive pay
Comprehensive benefits (pension, extended heath and vision, dental, life insurance, disability insurance, AD&D)
Excellent career growth and development opportunities
Work life balance
Employee discounts
Reimbursements

Fulltime

Stationary Engineer

Illinois Department of Public Health (IDPH)

Location:
United States , Manteno

Category:
Energy

Contract Type:
Employment contract

Salary:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 17, 2026

Expiration:
February 25, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Stationary Engineer

Stationary Engineer II

Stationary Engineer III

Stationary Engineer III

Stationary Engineer III

Engineering Manager

Engineering Manager

Licensed Stationary Engineer

Maintenance Technician - 4th Class Power Engineer

Stationary Engineer

Illinois Department of Public Health (IDPH)

Location:United States , Manteno

Category:Energy

Contract Type:Employment contract

Salary:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 17, 2026

Expiration:February 25, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Stationary Engineer

Stationary Engineer II

Stationary Engineer III

Stationary Engineer III

Stationary Engineer III

Engineering Manager

Engineering Manager

Licensed Stationary Engineer

Maintenance Technician - 4th Class Power Engineer

Location:
United States , Manteno

Category:
Energy

Contract Type:
Employment contract

Job Posted:
February 17, 2026

Expiration:
February 25, 2026