Starting Gate Driver Job at Woodbine Entertainment Group (Milton, Ontario)

Starting Gate Driver

Filling in, as required, driving the Starting Gate for live racing and qualifyin...

Location

Canada , Milton

Salary:

25.21 CAD / Hour

Woodbine Entertainment Group

Expiration Date

Until further notice

Requirements

Minimum High School education
Thorough knowledge of horses, horseracing industry, AGCO Rules of Racing, Company policies, and Departmental procedures
Ability to make decisions while considering several variables and outcomes in situations that are routine or unusual
Ability to influence individuals to respect the rules and practices established by the Company
Must possess a valid driver’s license

Job Responsibility

Filling in, as required, driving the Starting Gate for live racing and qualifying, and assisting the Starter in supervising all horses and drivers from the formation of the post parade until the start of each live race and qualifying race
Check the starting gate before the start of each qualifying and live racing session to ensure it is in proper running condition, and liaise with appropriate department to schedule any required maintenance
Drive the starting gate for live racing and qualifying in an extremely safe manner. Taking over the accelerator at the Start of each race, and following the field of horses around the track for the duration of the race
Assist the Starter during any on-track accidents or incidents

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 200000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Sound knowledge and hands-on experience in traditional and modern power electronic technologies
Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
Inverter technology for variable speed motor drive, including topologies and PWM techniques
Familiarity with both wide-band-gap and silicon power semiconductor devices
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
Power electronics system architecture design and hardware integration
Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)

Job Responsibility

Design and build high voltage, high power density power electronics converter products for eVTOL applications
Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
Leads new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
Design electronic power supply and sensing circuits
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to determine if the design meets functional and performance specifications
Troubleshoot and help root cause any issues that occur in the prototype line

Fulltime

Senior Power Electronics Engineer

We are seeking a Senior Power Electronics Engineer with strong hands-on experien...

Location

India , Ahmedabad; Pune

Salary:

Not provided

EnerComp Solutions Pvt Ltd

Expiration Date

Until further notice

Requirements

B.E. / B.Tech / M.Tech in Electronics, Electrical, or Power Electronics
Minimum 5 years of relevant experience in power electronics
Hands-on experience in ESC design is mandatory
Prior experience with UAV, EV, robotics, or motor-drive systems is preferred
Strong fundamentals in power electronics
Practical experience with: MOSFET selection and loss calculations
Gate driver design and protection strategies
High-current PCB design concepts
Current sensing and fault handling
Schematic design using KiCad or Altium

Job Responsibility

Design and develop BLDC/PMSM ESC hardware from concept to production
Design and validate: MOSFET-based power stages
Gate driver circuits (bootstrap, dead-time, protection features)
Current sensing (shunt / inline / Hall-based)
Voltage, temperature, and fault protection circuits
Support control interfaces such as PWM, DShot, UART, and CAN (DroneCAN)
Work closely with firmware engineers on AM32-based ESC firmware
Support hardware–firmware integration, tuning, and debugging
Assist in telemetry, fault reporting, and performance optimization
Design supporting power electronics including: DC–DC converters (buck / boost / auxiliary rails)

What we offer

Healthcare, dental, vision, life insurance, Flexible Spending Account (FSA), Health Savings Account (HSA)
Vacation, Sick, and Holiday paid leaves
Pre-tax commuter benefits (parking and transit)
Brand-name product and services in categories like travel, electronics, health, fitness, cellular, and more
Only a couple blocs from BART, Caltrain, Highway 101, carpool pickup, and Bay Bridge
Tuesday Dinners, Monthly Lunch Mixers, Monthly Happy Hour, Annual day event
Play any sport with colleagues and the bill is covered
Peet's and Philz coffee provided all day to order and pantry snacks

New

Power Electronics Test Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

105600.00 - 145200.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 3+ years or MS with 1+ years of experience in related fields
Sound knowledge and hands-on experience in integration and testing of high voltage power electronics converters, mixed signal boards, and power / gate drive boards
Good understanding of power electronics components and modules, including power semiconductors, gate drivers, magnetic components (transformers, inductors), passive components, connectors, device characterization, converter topologies (DC-DC, DC-AC, AC-DC), mechanical packaging, thermal management, modulation techniques, and control methods
Experience converting requirements and schematics into test plans with pass / fail criteria
Familiarity with automated test station hardware and software tools (e.g. NI, Labview)
Master of all types of lab instruments: power supplies, oscilloscope, signal generators, network analyzer, electronic loads, CAN tools, etc.
Experience performing the design and build of test stations
Experience managing vendors that are performing the design and build of test stations
Experience performing power electronics board and module bring-up and design verification test
Experience on root cause analysis of power converter module / board failures

Job Responsibility

Lead the hardware and software integration and development tests for the high performance aerospace power electronics (DC-DC, DC-AC, AC-DC) products
Responsible to specify, design, and perform testing of electrical aspects of product modules and boards implemented in airborne power conversion and distribution systems
Clearly define test plans and procedures, perform test cases and generate test reports for board/module bring-up, design verification and system integration, and support other tests including end-of-line, environmental / electrical stress and safety-of-flight
Lead tester designs from conception into production while working with cross-functional teams. Start to finish ownership of tester hardware to characterize / validate features, functions and performance of complex high voltage converters – from specification to design, build, manufacturing, and operation
Create development test cases for modules and boards
Tester design, covering both hardware and software needs
Test station build, bring-up, troubleshoot, operation and maintenance
Test station data consolidation, visualization, review and analysis
Conduct failure analysis of the modules / boards to understand the root cause and lead the cross-functional team effort to identify the resolutions
Support flight test data review and analysis for airborne power electronics products

Fulltime

New

Staff Electrical Engineer - Actuators

Archer is seeking a Staff Electrical Engineer- Actuators to lead the architectur...

Location

United States , San Jose

Salary:

160000.00 - 217000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Sound knowledge and hands-on experience in traditional and modern power electronic technologies including: Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system architecture design and hardware integration
Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
Motor control and commutation methods for various types of three phase motors
Microcontrollers and processors
Sensor technology and implementation
Gate drive design for wide bandgap devices (SiC and GaN)

Job Responsibility

Design and develop fault tolerant and high power density actuator controller including motor drivers, sensors, power stages, and embedded control interfaces
Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
Passive component design and optimization in power electronics systems
EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
Lead new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
Requirements capture, topology trade-study and performance modeling
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to verify functional and performance specifications

Fulltime

New

Staff Power Electronics Engineer- Inverter

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

162000.00 - 222000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to): Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system architecture design and hardware integration
Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
Motor control and commutation methods for various types of three phase motors
Microcontrollers and processors
Sensor technology and implementation
Gate drive design for wide bandgap devices (SiC and GaN)

Job Responsibility

Design and develop fault tolerant and high power density motor controller including drivers, sensors, power stages, and embedded control interfaces
Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
Passive component design and optimization in power electronics systems
EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
Lead new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
Requirements capture, topology trade-study and performance modeling
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to verify functional and performance specifications

Fulltime

New

Staff Electronics Engineer - Microcontroller and Sensors

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

162000.00 - 222000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Experience designing controllers and sensors for power converters or inverters with EMC considerations
Strong ability to work cross functionally and drive decisions to closure
Demonstrated ability to design a PCBA from a blank sheet to production
Understanding of analog and power circuits (MOSFETs, op-amps, switching regulators, gate drivers, etc.)
Experience designing PCBAs to avoid electromagnetic interference, minimizing stray inductance and capacitance, separating power/signal planes
Experience designing PCBAs for high-speed communications
Experience with component selection, including simulation, tolerance, variance, power dissipation etc.
Skilled using electrical engineering tools like oscilloscopes, network analyzers, signal generators, power supplies, semiconductor testers, etc.

Job Responsibility

Lead and drive the product development from start to finish
Develop detailed electrical system requirements based on design functional needs to control power converters, then design complete electrical systems to meet your requirements
Complete detailed design layouts and/or supervise design layout
Use simulations, prototypes, engineering tests, detailed electrical measurements to ensure your designs work as expected
Design processor and sensor architectures and select suitable microcontrollers for implementation in inverters/power converter applications
Design power supply, communication, signal conditioning, and measurement electronic circuits
Collaborate with other mechanical, systems, electrical, safety and manufacturing engineers to optimize your design for overall vehicle performance
Develop and execute engineering validation plans to verify your design meets all requirements

Fulltime

Product Technical Lead

The Product Technical Lead acts as a key partner across business functions; resp...

Location

United States , Granville

Salary:

Not provided

Owens Corning

Expiration Date

Until further notice

Requirements

B.S. in Engineering (Mechanical/Chemical/Electrical/Industrial), Chemistry or similar field
Ability to travel 15-25%
Working knowledge of industrial manufacturing processes
Demonstration of safe work practices
Leadership (direct or indirect) of interdisciplinary teams to achieve a common goal
Demonstrated ability to generate new and innovative, customer inspired solutions
Effective communicator
Demonstrated horizontal leadership and project management
Track record of competitively driving results and modeling resilience
Willingness to stop any job or task without hesitation to address a safety concern

Job Responsibility

Ensures rigorous compliance with safety procedures and OC corporate policies
Focuses on sustaining a safe work environment for self and coworkers
Identifies, understands, and effectively translates CFFUs into clear, measurable manufacturing and testing specifications
Regularly evaluate market environment and performance through customer visits, competitive product audits and comprehensive Product Line Reviews (PLRs)
Regularly evaluate manufactured product quality performance and drive improvement
Drive efficient and effective quality complaint and hold tag processing, root cause analysis, and corrective/preventive action execution
Develops test methods to quantify critical product characteristics
Enterprise Product Quality Management champion
Communicate effectively with people at all levels and placement within the organization
Lead product qualification when changes are made to existing products (raw material substitution, new plant/line start, etc.) using Production Readiness Process, including new product qualification

Starting Gate Driver

Woodbine Entertainment Group

Location:
Canada , Milton, Ontario

Category:
Art and Entertainment

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 29, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Starting Gate Driver

Starting Gate Driver

Staff Power Electronics Engineer

Senior Power Electronics Engineer

Power Electronics Test Engineer

Staff Electrical Engineer - Actuators

Staff Power Electronics Engineer- Inverter

Staff Electronics Engineer - Microcontroller and Sensors

Product Technical Lead

Starting Gate Driver

Woodbine Entertainment Group

Location:Canada , Milton, Ontario

Category:Art and Entertainment

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 29, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Starting Gate Driver

Starting Gate Driver

Staff Power Electronics Engineer

Senior Power Electronics Engineer

Power Electronics Test Engineer

Staff Electrical Engineer - Actuators

Staff Power Electronics Engineer- Inverter

Staff Electronics Engineer - Microcontroller and Sensors

Product Technical Lead

Location:
Canada , Milton, Ontario

Category:
Art and Entertainment

Contract Type:
Not provided

Job Posted:
January 29, 2026