Staff Electronics Engineer Job at ICEYE (Espoo)

Staff Electronics Engineer

Design and own the high-reliability mixed-signal electronics that power ICEYE’s ...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Minimum of 10 years of experience in electronics engineering, preferably in embedded or aerospace systems
Proven track record pushing technical boundaries in board-level design, from schematics and PCB layout to simulation and advanced measurement
Ability to lead complex, cross-functional hardware initiatives with significant organizational impact
Skilled in using data strategically to guide design decisions and influence technical direction
Recognized for deep business awareness—designing systems that meet both engineering excellence and business objectives
Exceptional communicator and collaborator, trusted to represent ICEYE’s technology internally and externally

Job Responsibility

Design and own the high-reliability mixed-signal electronics that power ICEYE’s SAR satellite constellation, with end-to-end accountability for critical spacecraft systems
Set the technical direction for spacecraft electronics by shaping long-term hardware strategy, scaling best practices across teams, and architecting solutions built for both today’s missions and future growth

What we offer

Occupational healthcare, occupational, and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of choice
Relocation support (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus

Fulltime

Staff Engineer, Electronics Architect

The Senior Engineer (Electronics) serves as the subject matter expert and techni...

Location

United States , Austin

Salary:

Not provided

Salt

Expiration Date

Until further notice

Requirements

Education: Bachelor's degree in Electrical, Electronic, or Computer Engineering required
Master's degree preferred.
8+ years of experience in electronics engineering, embedded systems, or hardware architecture.
Deep understanding of electronic system design, component selection, embedded interfaces, and system integration.
Experience developing architecture diagrams, interface definitions, and system-level documentation.
Strong understanding of communication protocols (SPI, I2C, UART, CAN, Ethernet, USB, wireless).
Proven ability to collaborate with Firmware and Software teams on system-level behaviors and architecture.
Strong analytical skills with the ability to assess limitations, evaluate risks, and propose technical solutions.
Experience with global product platforms and regional variations preferred.

Job Responsibility

Define, maintain, and evolve the end-to-end electronics architecture across all product platforms (dispensers, controllers, pedestals, chargers, edge devices, switches), including global and North American variants.
Develop and manage system-level documentation such as architecture diagrams, interface maps, compatibility matrices, and compliance requirements (safety, regulatory, EMC, environmental, payment certifications).
Lead cross-functional alignment with Electronics, Firmware, and Software teams to ensure cohesive system design, clear interfaces, defined behaviors, and seamless integration of components.
Evaluate system performance, limitations, interoperability, and field issues
collaborate with Customer Support and Operations to drive architectural improvements for reliability, manufacturability, and serviceability.
Partner with Product Management to align architecture with business needs, feature roadmaps, regional requirements, and legacy considerations, including global vs. North American variations.
Drive innovation by introducing new technologies, components, and platforms while supporting platform strategy through harmonization, modularization, scalability, reuse, and cost efficiency.
Provide technical leadership through system design reviews, mentorship, and guidance-promoting best practices, standardization, accountability, and strong decision-making across multidisciplinary teams.

Fulltime

Staff Electronics Engineer - Microcontroller and Sensors

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

162000.00 - 222000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Experience designing controllers and sensors for power converters or inverters with EMC considerations
Strong ability to work cross functionally and drive decisions to closure
Demonstrated ability to design a PCBA from a blank sheet to production
Understanding of analog and power circuits (MOSFETs, op-amps, switching regulators, gate drivers, etc.)
Experience designing PCBAs to avoid electromagnetic interference, minimizing stray inductance and capacitance, separating power/signal planes
Experience designing PCBAs for high-speed communications
Experience with component selection, including simulation, tolerance, variance, power dissipation etc.
Skilled using electrical engineering tools like oscilloscopes, network analyzers, signal generators, power supplies, semiconductor testers, etc.

Job Responsibility

Lead and drive the product development from start to finish
Develop detailed electrical system requirements based on design functional needs to control power converters, then design complete electrical systems to meet your requirements
Complete detailed design layouts and/or supervise design layout
Use simulations, prototypes, engineering tests, detailed electrical measurements to ensure your designs work as expected
Design processor and sensor architectures and select suitable microcontrollers for implementation in inverters/power converter applications
Design power supply, communication, signal conditioning, and measurement electronic circuits
Collaborate with other mechanical, systems, electrical, safety and manufacturing engineers to optimize your design for overall vehicle performance
Develop and execute engineering validation plans to verify your design meets all requirements

Fulltime

Staff Electronics Engineer- Propulsion Controller

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

170800.00 - 225600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years experience in complex electronics and control system design
Proven expertise in architecting microcontroller-based control systems from concept to production
Deep knowledge of low-voltage power design, analog signal conditioning, and communication protocols including CAN and Ethernet
Experience designing fault-tolerant, redundant electronics for safety-critical applications
Strong understanding of PCBA design for EMC/EMI mitigation, signal integrity, and thermal management
Demonstrated technical leadership and ability to mentor engineering teams

Job Responsibility

Own the technical roadmap and architecture for engine and generator controller boards from concept through flight certification
Drive microcontroller selection, processing architecture, and memory management to meet real-time performance and safety requirements
Design low-voltage power distribution trees, precision analog signal conditioning circuits, and sensor interfaces for temperature, current, voltage, position, and vibration sensing in harsh environments
Architect and validate multi-protocol communication systems including CAN, Ethernet, SPI, I2C, and UART for integration with aircraft subsystems
Develop fault detection, isolation, and recovery logic in hardware to ensure fail-safe operation and meet functional safety requirements
Serve as technical authority for controller design, leading design reviews, mentoring engineers, and ensuring best practices for reliability and manufacturability
Collaborate with firmware, power electronics, mechanical, systems, and safety teams to integrate controllers into the propulsion system
Develop and execute validation plans using simulation and testing to meet performance, EMC, and certification requirements

Fulltime

Staff Power Electronics Engineer- Inverter

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

162000.00 - 222000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years of relevant electrical system and circuit board design experience
Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to): Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Power electronics system architecture design and hardware integration
Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
Motor control and commutation methods for various types of three phase motors
Microcontrollers and processors
Sensor technology and implementation
Gate drive design for wide bandgap devices (SiC and GaN)

Job Responsibility

Design and develop fault tolerant and high power density motor controller including drivers, sensors, power stages, and embedded control interfaces
Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
Passive component design and optimization in power electronics systems
EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
Lead new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
Requirements capture, topology trade-study and performance modeling
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to verify functional and performance specifications

Fulltime

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 200000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
Sound knowledge and hands-on experience in traditional and modern power electronic technologies
Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
Inverter technology for variable speed motor drive, including topologies and PWM techniques
Familiarity with both wide-band-gap and silicon power semiconductor devices
Passive power devices, e.g. inductors, capacitors, resistors and transformers
Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
Power electronics system architecture design and hardware integration
Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)

Job Responsibility

Design and build high voltage, high power density power electronics converter products for eVTOL applications
Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
Leads new designs from conception into production while working with a multidisciplinary team
Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
Design electronic power supply and sensing circuits
Schematic, layout and PCB assembly design and review
Design and carry out prototype verification tests for proof of concept
Analyze test data and reports to determine if the design meets functional and performance specifications
Troubleshoot and help root cause any issues that occur in the prototype line

Fulltime

Staff Engineer

We are looking for a highly technical Staff Systems Engineer who will play a key...

Location

United States of America , Lawrence

Salary:

131000.00 - 220000.00 USD / Year

Fresenius Kidney Care Eupora

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in related engineering Biomedical Engineering, Electrical Engineering, Computer Science, or Mechanical Engineering (or equivalent in a technical/scientific field)
MS/PhD preferred
10+ years experience in Medical Device
Strong understanding of medical device product design and regulatory processes
Hands-on experience with modeling-based design and development and Modeling Based System Engineering (MBSE)
Experience with using MBSE tools such as Catia/No Magic and Simulink/MATLAB
Able to communicate effectively, both verbally and in writing
Experience with medical device design and development processes that conform to standards including: ISO 9000, ISO 13485, IEC 62304, IEC 60601, and ISO 14971
Strong understanding of system design, electro-mechanical systems, electronics, mechanical and software integration
Systems engineering experience (design product architecture development, requirements & specification development, risk management, V&V testing)

Job Responsibility

Leads the development and maintenance of system architecture, product specifications, requirements documents, build instructions, acceptance test specifications, V&V documentation, and other technical documentation
Provides technical leadership for product development, integration, testing, and reliability improvements
Leads modeling-based design and development and systems engineering activities
Leads a team of engineers and technicians to support product development as well as V&V activities in support of a regulatory filing
Maintain knowledge of state-of-the-art principles, theories, and practices around all systems engineering related activities
Leads the development of algorithms, test plans, processes, test fixtures, data acquisition capabilities, etc., in support of ongoing product development as well as informal and formal testing of complex electro-mechanical, software-driven medical devices
Collaborates with a diverse technical team to create, update, and maintain documentation that is or will become part of the product design history file (DHF)
Works with subsystem teams, domain subject matter experts, and suppliers in the identification, logging, assessment, and resolution of integration and test issues
Participates in Risk Management activities (including FMEA, FTA, OMA, etc.) to ensure that design and process needs are identified and appropriately addressed
Creates and reviews process, design, and fixture documentation including work guidelines, specifications, and CAD models / drawings

What we offer

medical insurance
dental insurance
vision insurance
401(k) with company match
paid time off
parental leave
potential for performance-based bonuses depending on company and individual performance

Fulltime

Staff Engineer, Systems Design Engineering

In this role, you will represent the systems engineering team in product develop...

Location

India , Bangalore

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Masters in Embedded Systems/VLSI/MicroElectronics or Bachelors(B.E./B.Tech) in Electronics & Communications/Electricals & Electronics/Computer Science
7+ years of experience semiconductor Products systems design or architecture
Knowledge of C, C++/ System C, Python, GIT, GitHub, AGILE
Proven ability to work as part of a global team in multiple geographies
Multi-disciplinary experience, including familiarity with Firmware, HW, and ASIC design

Job Responsibility

Represent the systems engineering team in product development forums
Deliver product design specifications, test objectives, and debugging
Identify the most optimal solution, considering technical, cost, and schedule tradeoffs
Collaborate with ASIC, HW, Firmware, and Validation teams to address technical challenges
Lead the design process from concept to implementation to validation
Track system-milestones to ensure product goals and deliverables are met
Understand customer specifications and drive design changes to meet them
Deliver product design specification documents and test objectives
Align the development and validation process with cross-functional teams
Create internal and external specifications, stay current with technology trends and roadmaps

Fulltime

Select Country

Staff Electronics Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Staff Electronics Engineer

Staff Electronics Engineer

Staff Engineer, Electronics Architect

Staff Electronics Engineer - Microcontroller and Sensors

Staff Electronics Engineer- Propulsion Controller

Staff Power Electronics Engineer- Inverter

Staff Power Electronics Engineer

Staff Engineer

Staff Engineer, Systems Design Engineering

Our AI answers in your language