CrawlJobs Logo

Staff Electronics Engineer - Microcontroller and Sensors

archer.com Logo

Archer Aviation

Location Icon

Location:
United States , San Jose

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

162000.00 - 222000.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise.

Job Responsibility:

  • Lead and drive the product development from start to finish
  • Develop detailed electrical system requirements based on design functional needs to control power converters, then design complete electrical systems to meet your requirements
  • Complete detailed design layouts and/or supervise design layout
  • Use simulations, prototypes, engineering tests, detailed electrical measurements to ensure your designs work as expected
  • Design processor and sensor architectures and select suitable microcontrollers for implementation in inverters/power converter applications
  • Design power supply, communication, signal conditioning, and measurement electronic circuits
  • Collaborate with other mechanical, systems, electrical, safety and manufacturing engineers to optimize your design for overall vehicle performance
  • Develop and execute engineering validation plans to verify your design meets all requirements

Requirements:

  • Electrical Engineering Degree or equivalent experience
  • 8+ years of relevant electrical system and circuit board design experience
  • Experience designing controllers and sensors for power converters or inverters with EMC considerations
  • Strong ability to work cross functionally and drive decisions to closure
  • Demonstrated ability to design a PCBA from a blank sheet to production
  • Understanding of analog and power circuits (MOSFETs, op-amps, switching regulators, gate drivers, etc.)
  • Experience designing PCBAs to avoid electromagnetic interference, minimizing stray inductance and capacitance, separating power/signal planes
  • Experience designing PCBAs for high-speed communications
  • Experience with component selection, including simulation, tolerance, variance, power dissipation etc.
  • Skilled using electrical engineering tools like oscilloscopes, network analyzers, signal generators, power supplies, semiconductor testers, etc.
  • Experience shipping high-volume electronics products
  • Experience designing for mission critical systems using fail-safe and redundant designs
  • Experience architecting designs to meet functional safety requirements

Nice to have:

  • Experience designing electrical systems for aerospace or automotive requirements
  • Experience in embedded programming
  • Experience designing PCBAs for high power and high voltage power converters and/or inverters
  • Hands on experience with aviation DO-160G testing and DO-254 development
  • Passion for aviation and eVTOLs

Additional Information:

Job Posted:
March 10, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Archer Aviation - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Staff Electronics Engineer - Microcontroller and Sensors

Staff Power Electronics Engineer

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
163200.00 - 200000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS Degree in Electrical Engineering with 10+ years or MS with 8+ years of experience in related fields
  • Sound knowledge and hands-on experience in traditional and modern power electronic technologies
  • Low power and high power DC-DC topologies, gate driver, modulation techniques and control theories
  • Inverter technology for variable speed motor drive, including topologies and PWM techniques
  • Familiarity with both wide-band-gap and silicon power semiconductor devices
  • Passive power devices, e.g. inductors, capacitors, resistors and transformers
  • Experience in design, build, manufacturing and testing of custom magnetics (high -frequency transformers, inductors)
  • Power electronics system architecture design and hardware integration
  • Power converters and motor drive (AC-DC, DC-DC, DC-AC) control technologies
  • Microcontrollers and multiple serial protocols (UART, CAN, SPI, I2C, etc.)
Job Responsibility
Job Responsibility
  • Design and build high voltage, high power density power electronics converter products for eVTOL applications
  • Develop and analyze electrical architectures and power converter (DC-DC) topologies, and ensure system functions, performance, safety and reliability requirements are achieved
  • Responsible for all aspects of power electronics designs required in an all-electric aircraft, from components to circuits, modules and system integration
  • Leads new designs from conception into production while working with a multidisciplinary team
  • Start to finish ownership of hardware – from specification to design, component selection, modeling, prototype, product build, verification testing, safety and reliability validation and manufacturing
  • Design electronic power supply and sensing circuits
  • Schematic, layout and PCB assembly design and review
  • Design and carry out prototype verification tests for proof of concept
  • Analyze test data and reports to determine if the design meets functional and performance specifications
  • Troubleshoot and help root cause any issues that occur in the prototype line
  • Fulltime
Read More
Arrow Right

Staff Electronics Engineer- Propulsion Controller

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
170800.00 - 225600.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Electrical Engineering Degree or equivalent experience
  • 8+ years experience in complex electronics and control system design
  • Proven expertise in architecting microcontroller-based control systems from concept to production
  • Deep knowledge of low-voltage power design, analog signal conditioning, and communication protocols including CAN and Ethernet
  • Experience designing fault-tolerant, redundant electronics for safety-critical applications
  • Strong understanding of PCBA design for EMC/EMI mitigation, signal integrity, and thermal management
  • Demonstrated technical leadership and ability to mentor engineering teams
Job Responsibility
Job Responsibility
  • Own the technical roadmap and architecture for engine and generator controller boards from concept through flight certification
  • Drive microcontroller selection, processing architecture, and memory management to meet real-time performance and safety requirements
  • Design low-voltage power distribution trees, precision analog signal conditioning circuits, and sensor interfaces for temperature, current, voltage, position, and vibration sensing in harsh environments
  • Architect and validate multi-protocol communication systems including CAN, Ethernet, SPI, I2C, and UART for integration with aircraft subsystems
  • Develop fault detection, isolation, and recovery logic in hardware to ensure fail-safe operation and meet functional safety requirements
  • Serve as technical authority for controller design, leading design reviews, mentoring engineers, and ensuring best practices for reliability and manufacturability
  • Collaborate with firmware, power electronics, mechanical, systems, and safety teams to integrate controllers into the propulsion system
  • Develop and execute validation plans using simulation and testing to meet performance, EMC, and certification requirements
  • Fulltime
Read More
Arrow Right

Staff Power Electronics Engineer- Inverter

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
162000.00 - 222000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Electrical Engineering Degree or equivalent experience
  • 8+ years of relevant electrical system and circuit board design experience
  • Sound knowledge and hands-on experience in traditional and modern power electronic technologies including (not limited to): Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
  • Passive power devices, e.g. inductors, capacitors, resistors and transformers
  • Power electronics system architecture design and hardware integration
  • Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
  • Motor control and commutation methods for various types of three phase motors
  • Microcontrollers and processors
  • Sensor technology and implementation
  • Gate drive design for wide bandgap devices (SiC and GaN)
Job Responsibility
Job Responsibility
  • Design and develop fault tolerant and high power density motor controller including drivers, sensors, power stages, and embedded control interfaces
  • Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
  • Passive component design and optimization in power electronics systems
  • EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
  • Lead new designs from conception into production while working with a multidisciplinary team
  • Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
  • Requirements capture, topology trade-study and performance modeling
  • Schematic, layout and PCB assembly design and review
  • Design and carry out prototype verification tests for proof of concept
  • Analyze test data and reports to verify functional and performance specifications
  • Fulltime
Read More
Arrow Right

Staff Electrical Engineer - Actuators

Archer is seeking a Staff Electrical Engineer- Actuators to lead the architectur...
Location
Location
United States , San Jose
Salary
Salary:
160000.00 - 217000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Electrical Engineering Degree or equivalent experience
  • 8+ years of relevant electrical system and circuit board design experience
  • Sound knowledge and hands-on experience in traditional and modern power electronic technologies including: Inverter technology for variable speed motor drive (MOSFET, rectifiers and gate driver PWM technologies)
  • Passive power devices, e.g. inductors, capacitors, resistors and transformers
  • Power electronics system architecture design and hardware integration
  • Motor drive and power converters (AC-DC, DC-DC, DC-AC) control technologies
  • Motor control and commutation methods for various types of three phase motors
  • Microcontrollers and processors
  • Sensor technology and implementation
  • Gate drive design for wide bandgap devices (SiC and GaN)
Job Responsibility
Job Responsibility
  • Design and develop fault tolerant and high power density actuator controller including motor drivers, sensors, power stages, and embedded control interfaces
  • Be responsible for all aspects of power electronics designs from components, circuits, modules and system integration
  • Passive component design and optimization in power electronics systems
  • EMC and Lightning design, analysis, and testing for low voltage and high voltage electronic systems
  • Lead new designs from conception into production while working with a multidisciplinary team
  • Start to finish ownership of hardware – from specification to design, prototype, reliability validation and manufacturing
  • Requirements capture, topology trade-study and performance modeling
  • Schematic, layout and PCB assembly design and review
  • Design and carry out prototype verification tests for proof of concept
  • Analyze test data and reports to verify functional and performance specifications
  • Fulltime
Read More
Arrow Right

Staff Engineer, Data Management Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan, Penang
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • At least 5 years of working experience in related field
  • Bachelor/Master in Electronic and Electrical Engineering/Mechatronics/Robotics
  • Experience in different kinds of sensor data collection/interaction (motor encoder/thermocouple/vibration/flow sensor) is preferable
  • Electrical circuit design and related system software and firmware/embedded software development experience
  • Familiarity with IoT platforms and network protocols (e.g., MQTT, CoAP)
  • Experience in motion control domain like PLC, motion controller, servo motor position, motion software, electrical noise suppression is a plus
  • Experience working on common communications interface: SPI, I2C, USB, RS232, RS485
  • Experience with embedded systems, real-time operating systems (RTOS), and microcontroller programming
  • Proficiency in programming languages (C, C#, Python preferred)
  • Basic knowledge of SQL
Job Responsibility
Job Responsibility
  • Design and develop IoT edge devices and sensors
  • Develop use of new sensors to monitor critical processes
  • Develop scripts to pre-process and load sensor data for application use
  • Understand manufacturing and information systems, and integrate data to respective IoT systems
  • Write, test, and implement software and firmware for IoT devices
  • Setup and maintain the health and data quality of the sensor acquisition systems
  • Continue improving the acquisition system through software updates or new/improved hardware
  • Documentation of systems and procedures for the setup and maintenance of hardware systems
  • Collaborate with cross-functional teams to understand use cases, determine solutions and integrate hardware and software systems
  • Implement security measures to protect IoT networks and data
  • Fulltime
Read More
Arrow Right
New

Customer Results Specialist

Looking for a career that fuels your passion for health and fitness? Help people...
Location
Location
United States , Shreveport
Salary
Salary:
13.00 USD / Hour
defynedbrands.com Logo
Defyned Brands
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Self driven
  • Goal oriented
  • People person
  • Some customer focused experience
  • Ready to learn
  • Team player
  • Inspired by health and fitness space
Job Responsibility
Job Responsibility
  • Help customers by understanding their health journey and goals
  • Learn product lines
  • Make honest recommendations for customers
  • Contribute to social media efforts
  • Help with inventory
  • Add to a positive environment
What we offer
What we offer
  • Opportunity for long term career
  • Access to company leadership for mentoring
  • Starting at $13/hour with growth opportunities
  • 1% commission on all personal sales
  • Up to 65% off discount
  • Health, wellness and fitness focused culture
  • 5SN SWAG
  • Learn leadership and development skills
  • Health, vision and dental insurance (full time only)
  • 401k + 4% match
  • Fulltime
Read More
Arrow Right
New

Pharmacy Technician

We’re building a world of health around every individual — shaping a more connec...
Location
Location
United States , Lexington
Salary
Salary:
16.00 - 24.00 USD / Hour
https://www.cvshealth.com/ Logo
CVS Health
Expiration Date
June 23, 2026
Flip Icon
Requirements
Requirements
  • Must comply with any state board of pharmacy requirements or laws governing the practice of pharmacy, which includes but is not limited to, age, education, and licensure/certification
  • If the state board of pharmacy does not address or mandate a minimum age requirement, must be at least 16 years of age
  • If the state board of pharmacy does not address or mandate a minimum educational requirement, must have a high school diploma or equivalent, or be actively enrolled in high school or high school equivalency program
  • State-level licensure and national certification requirements vary by state
  • Regular and predictable attendance, including nights and weekends
  • Ability to complete required training within designated timeframe
  • Attention and Focus
  • Customer Service and Team Orientation
  • Communication Skills
  • Mathematical Reasoning
Job Responsibility
Job Responsibility
  • Living our purpose by following all company SOPs at each workstation to help our Pharmacists manage and improve patient health
  • Following pharmacy workflow procedures at each pharmacy workstation for safe and accurate prescription fulfillment
  • Contributing to positive patient experiences by showing empathy and genuine care
  • Completing basic inventory activities, as permitted by law, and as directed by the pharmacy leadership team
  • Contributing to a high-performing team, embracing a growth mindset, and being receptive to feedback
  • Remaining flexible for both scheduling and business needs, while contributing to a safe, inclusive, and engaging team dynamic
  • Understanding and complying with all relevant federal, state, and local laws, regulations, professional standards, and ethical principles
  • Delivering additional patient health care services where allowable by law
  • Completing additional licensure and training requirements to obtain Technician Immunizer status
  • Educating patients about the importance of vaccines and referring patients to the Pharmacist-on-duty for vaccination questions
What we offer
What we offer
  • dental
  • vision
  • wellness resources
  • employee discounts
  • access to certain voluntary benefits
  • other programs
  • Parttime
Read More
Arrow Right
New

Handyman

Randstad UK CPE team is looking to onboard an experienced and reliable Site Hand...
Location
Location
United Kingdom , Maidenhead
Salary
Salary:
18.00 - 19.00 GBP / Hour
https://www.randstad.com Logo
Randstad
Expiration Date
July 18, 2026
Flip Icon
Requirements
Requirements
  • CSCS Card
  • Handyman or Multi-Trade Operative experience on new build residential construction sites
  • Ability to perform multiple trades (e.g., carpentry, painting, basic plumbing/tiling, installation of spouts)
  • Must have own full set of hand tools and basic power tools.
Job Responsibility
Job Responsibility
  • Minor repairs to architraves, skirting boards, doors, and general timber work
  • Patch painting, touching up, filling small cracks/holes, and basic making good
  • Replacing cracked or chipped wall/floor tiles, and re-grouting
  • Fixing minor leaks, re-sealing baths/showers, and re-masticing
  • Responding to and resolving issues identified on handover lists
  • Assisting the Site Manager with general maintenance and ensuring the site compound and welfare areas are kept tidy and safe
  • Adhering strictly to all site safety rules and procedures, including the safe use of all tools and equipment.
  • Fulltime
Read More
Arrow Right