CrawlJobs Logo

Staff BMS HW Verification Engineer

archer.com Logo

Archer Aviation

Location Icon

Location:
United States , San Jose

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

150000.00 - 208000.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

In the Staff BMS HW Verification Engineer role, you will lead the end-to-end verification and validation of Archer’s high-voltage Battery Management System (BMS) electronics — ensuring that the hardware, sensing, and control circuitry meet the stringent safety, reliability, and certification standards required for electric vertical takeoff and landing (eVTOL) aircraft. You will develop and execute hardware verification plans, design and automate test setups, perform environmental and functional qualification, and generate the certification evidence needed to demonstrate compliance with FAA and industry standards such as DO-160G, DO-254, and ARP4754A. Your work will directly enable the certification and safe operation of Archer’s battery systems powering the next generation of sustainable urban air mobility.

Job Responsibility:

  • Lead the verification and validation (V&V) activities for the Battery Management System (BMS) electronics used in Archer’s high-voltage battery packs
  • Develop comprehensive hardware verification plans, test procedures, and traceability matrices aligned with system and certification requirements (DO-160G, DO-254, ARP4754A)
  • Define test methodologies for environmental, functional, and safety verification of BMS printed circuit board assemblies (PCBAs) and associated sensing electronics
  • Collaborate with systems, design, and certification engineering teams to derive verification requirements from system design documentation and certification plans
  • Design, build, and automate hardware test setups, including instrumentation, data acquisition, power supplies, CAN interfaces, and fault-injection mechanisms
  • Execute and document test campaigns at the component, subsystem, and integrated aircraft levels to demonstrate compliance with FAA airworthiness standards
  • Author detailed test reports and support certification deliverables including compliance matrices, traceability reports, and verification summaries
  • Participate in design reviews, hardware qualification, and root cause analysis to ensure robust and certifiable hardware performance

Requirements:

  • BS or MS in Electrical Engineering, Computer Engineering, or a related discipline
  • 5+ years of experience in hardware verification, test engineering, or electronics qualification—preferably in aerospace, automotive, or other regulated industries
  • Strong understanding of mixed-signal electronic design, including analog sensing, power electronics, and microcontroller-based systems
  • Proficiency in developing and executing hardware verification procedures from system requirements
  • Experience with environmental and EMI/EMC qualification testing per DO-160G or similar standards
  • Knowledge of design assurance and verification methodologies per DO-254 or ISO 26262
  • Familiarity with hardware and system certification processes under FAA or EASA frameworks
  • Excellent communication, documentation, and cross-functional collaboration skills

Nice to have:

  • Hands-on experience with high-voltage BMS electronics and battery pack integration
  • Familiarity with ARP4754A development lifecycle and certification planning
  • Experience with hardware test automation (Python, LabVIEW, dSPACE, or similar)
  • Background in fault injection, HALT/HASS, or reliability testing
  • Working knowledge of lithium-ion battery characteristics and safety standards
  • Experience interfacing with regulatory authorities or DERs for certification compliance

Additional Information:

Job Posted:
March 10, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Archer Aviation - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Staff BMS HW Verification Engineer

New

Senior Associate Data Engineer

The Senior Associate Data Engineer is a developing specialist role, tasked with ...
Location
Location
Malaysia , Selangor
Salary
Salary:
Not provided
nttdata.com Logo
NTT DATA
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Knowledge of the definition and management of scoping requirements, definition and prioritization activities
  • Understanding of database concepts, object and data modelling techniques and design principles and conceptual knowledge of building and maintaining physical and logical data models
  • Knowledge of Microsoft Azure Data Factory, SQL Analysis Server, SAP Data Services, SAP BTP
  • Understanding of data architecture landscape between physical and logical data models
  • Analytical mindset with good business acumen skills
  • Problem-solving aptitude with the ability to communicate effectively, both written and verbal
  • Ability to build effective relationships at all levels within the organization
  • Seasoned expert in programing languages (Perl, bash, Shell Scripting, Python, etc.)
  • Bachelor's degree or equivalent in computer science, software engineering, information technology, or a related field
  • Moderate level experience in data engineering, data mining within a fast-paced environment
Job Responsibility
Job Responsibility
  • Contributes to the creation of data models in a structured data format to enable analysis thereof
  • Proactively supports the design and development of scalable extract, transform and loading (ETL) packages from the business source systems and the development of ETL routines to populate data from sources
  • Participates in the transformation of object and data models into appropriate database schemas within design constraints
  • Interprets installation standards to meet project needs and produce database components as required
  • Receives instructions from various stakeholders to create test scenarios and be responsible for participating in thorough testing and validation to support the accuracy of data transformations
  • Proactively supports the running of data migrations across different databases and applications, e.g. MS Dynamics, Oracle, SAP and other ERP systems
  • Support the definition and implementation of data table structures and data models based on requirements
  • Contributes to analysis, and development of ETL and migration documentation
  • Receives instructions from various stakeholders to evaluate potential data requirements
  • Supports the definition and management of scoping, requirements, definition, and prioritization activities for small-scale changes and assist with more complex change initiatives
  • Fulltime
Read More
Arrow Right
New

Senior/Principal R&D Aerospace Engineer, Advanced Concepts Engineering

We are seeking an experienced R&D S&E, Aerospace Engineering to lead the rapid v...
Location
Location
United States , Albuquerque
Salary
Salary:
117500.00 - 235700.00 USD / Year
sandia.gov Logo
Sandia National Laboratories
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in a relevant discipline and five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development
  • Ability to obtain and maintain a DOE Q-level security clearance (or DOD equivalent) and an SCI clearance
Job Responsibility
Job Responsibility
  • Perform concept development and trade space exploration for hypersonic and ballistic missile vehicles for hypersonic and ND applications
  • Execute the RACE workflow for vehicle concept development
  • Leverage aero-thermal models and codes within the RACE workflow
  • Run basic CFD, trajectory, and other codes for concept exploration
  • Work with SMEs in aerodynamics, thermal, mechanical, systems engineering, etc. to validate code, validate the results, and find solutions to roadblocks in the designs
  • Maintain the code base or work with code maintainers for RACE
  • Work to improve the general vehicle concept trade space and the speed / fidelity at which we can deliver results
  • Work with others in the center to improve the vehicle concept process, including working with experts in WSTAT, MBSE, AFSIM, etc.
What we offer
What we offer
  • Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
  • Extraordinary co-workers
  • Some of the best tools, equipment, and research facilities in the world
  • Career advancement and enrichment opportunities
  • Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting
  • Generous vacation
  • strong medical and other benefits
  • competitive 401k
  • learning opportunities
  • relocation assistance
  • Fulltime
Read More
Arrow Right
New

Room Attendant

The Room Attendant must keep all rooms and hallway areas in the hotel clean by p...
Location
Location
United States , Atlanta
Salary
Salary:
Not provided
tandemhospitalitygroup.com Logo
Tandem Hospitality Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school education or equivalent
  • or up to six months related experience or training
  • or equivalent combination of education and experience
  • Ability to read and to recognize similarities and differences between words and between series of numbers
  • Ability to print and speak simple sentences
  • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions
  • Ability to deal with problems in situations
  • Must be able to communicate with guests
  • Must be able to recognize situations which may involve guests that require immediate supervisory attention
  • Must know and use reasonable care for the safety and security of the guests
Job Responsibility
Job Responsibility
  • Clean, dust, wax, scrub, polish and service guest rooms daily in accordance with hotel procedures
  • Stock cart with guest room supplies at beginning and end of shifts
  • Greet all guests
  • Replace linens on beds and replenish guest room supplies and amenities
  • Empty wastebaskets
  • Rearrange furnishings, drapes and room accessories
  • Leave the guest room in uniform arrangement as determined by the Executive Housekeeper and make sure the door is closed and the room is locked
  • Report any damage, hazards, repairs, and strangers in assigned areas
  • Return any items found in guest rooms, hallways, or back of the house to the Housekeeping department as a lost and Found item and writing: the date, where it was found, description of the item, and the name of the person who found it
  • Responsible for all keys signed out for the shift
  • Parttime
Read More
Arrow Right
New

R&D Systems Engineer, Advanced Concepts Engineering

We are seeking an R&D S&E Systems Engineer to lead concept development (Phase 1)...
Location
Location
United States , Albuquerque
Salary
Salary:
117500.00 - 235700.00 USD / Year
sandia.gov Logo
Sandia National Laboratories
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in a relevant discipline and five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development.
  • Ability to obtain and maintain a DOE Q-level security clearance and SCI access.
Job Responsibility
Job Responsibility
  • Lead concept studies as PI: shape scope, develop success criteria, and direct technical approach
  • coordinate multidisciplinary teams.
  • Develop and advise on requirements for hypersonic, ballistic, and cruise missiles.
  • Engage with COCOMS, services, and the IC to understand gaps and identify potential solutions.
  • Identify gaps and risks early: quantify where concepts don't close (performance, integration, cost/schedule, producibility) and propose mitigation paths (analysis, experiments, prototypes).
  • Translate operational needs into requirements: define L0/L1 requirements, interfaces, constraints, and 'known unknowns'.
  • Work with systems engineers and SMEs across many engineering disciplines
  • Lead studies on mission-informed trades: connect mission objectives, kill-chain constraints, vehicle feasibility, and technology readiness.
  • Communicate results to sponsors and decision makers, both technical and non-technical. This includes concise technical briefs, recommendations, and proposals (quads, one-pagers, transition plans).
What we offer
What we offer
  • Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
  • Extraordinary co-workers
  • Some of the best tools, equipment, and research facilities in the world
  • Career advancement and enrichment opportunities
  • Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home)
  • Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance
  • Fulltime
Read More
Arrow Right
New

Banquet Server

In the role of Banquet Server, you will work alongside our current team members ...
Location
Location
United States , Lexington
Salary
Salary:
Not provided
tandemhospitalitygroup.com Logo
Tandem Hospitality Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Excellent communication skills
  • Positive attitude and the ability to work with a variety of people and in cooperation with coworkers efficiently and effectively
  • Stand, sit, or walk for an extended period
  • Must be able to work under pressure and maintain a courteous demeanor and attitude towards all
  • Ability to prioritize and multi-task
  • Ability to easily adapt to organizational and environmental changes
  • Must be able to work a flexible schedule, inluding but not limited to evenings, weekends, and holidays
  • Report to work at the scheduled time, neatly groomed and in regulation with company dress code policy
  • Adhere to all regulatory, company and department policies and procedures
  • Move, lift, carry, push, pull, and place objects weighing less than or equal to 30 pounds without assistance
Job Responsibility
Job Responsibility
  • Assist with table and meeting space prep before the event
  • Read and execute all BEO's
  • Set up display stations and bars, proper food arrangement
  • Assist with food/buffet preparation before and during the event
  • Ensure safe food handling guidelines are always followed
  • Deliver food to the meeting space in a timely manner
  • Serve plated items to guests and both alcoholic and non-alcoholic beverages
  • Always remain guest focused with the goal being 100% satisfaction and completion of all BEO's
  • Assist with post-event clean up, inventory, food storage, and tear down
  • Work as a member of a team, communicate with team members and supervisors to ensure efficient work ethic and overall guest satisfaction
  • Parttime
Read More
Arrow Right
New

R&D Microwave & Sensor Engineer - Radar ISR Mission Engineering

We are seeking a R&D S&E, Microwave & Sensor Engineering to join our dynamic tea...
Location
Location
United States , Albuquerque
Salary
Salary:
102400.00 - 199700.00 USD / Year
sandia.gov Logo
Sandia National Laboratories
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development
  • Ability to obtain and maintain a DOE Q level security clearance
  • Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation)
  • Laboratory skills and knowledge of RF and digital test equipment
  • Knowledge of RF, Digital Communications, Electronic Warfare, and Cyber Security systems and principles
  • Ability to work successfully in a dynamic, interdisciplinary, teaming environment
  • Strong foundation in radar fundamentals and digital signal processing (DSP)
  • Demonstrated experience with one or more of the following: radar system hardware, radar software, system modeling/analysis, RF scattering phenomenology
  • Programming experience in MATLAB and/or similar numerical computing environments
  • proficiency in one or more general-purpose languages (e.g., C/C++, Python, Rust, Java, Fortran)
Job Responsibility
Job Responsibility
  • Analyze, design, and develop radar systems, subsystems, and modules
  • Develop Concepts of Operation
  • System-level design and integration
  • Develop test and qualification plans
  • Develop models for computational analysis of systems and processes
  • Lead or support formal program reviews
  • Negotiate technical and programmatic requirements with customers
  • Deliver hardware within schedule and budgetary constraints
  • Shape, guide or lead research activities to support program needs
  • Develop technical documentation
What we offer
What we offer
  • Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
  • Extraordinary co-workers
  • Some of the best tools, equipment, and research facilities in the world
  • Career advancement and enrichment opportunities
  • Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home)
  • Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance
  • Fulltime
Read More
Arrow Right
New

Bartender / Server

The role of a bartender is to provide an excellent guest experience, make signat...
Location
Location
United States , Atlanta
Salary
Salary:
Not provided
tandemhospitalitygroup.com Logo
Tandem Hospitality Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Excellent knowledge of in mixing, garnishing and serving drinks
  • Computer literacy
  • Positive attitude and excellent communication skills
  • Ability to keep the bar organized, stocked and clean
  • Relevant training certificate
Job Responsibility
Job Responsibility
  • Prepare both alcoholic and non-alcoholic beverages for bar and restaurant patrons
  • Interact with customers, take orders and serving
  • Assess customers’ needs and preferences and make recommendations
  • Mix ingredients to prepare cocktails
  • Plan and present bar menu
  • Check customers’ identification and confirm it meets legal drinking age
  • Restock and replenish bar inventory and supplies
  • Stay guest focused and provide an excellent guest experience
  • Comply with all food and beverage regulations
  • Superior knowledge of classic cocktails
  • Fulltime
Read More
Arrow Right
New

Field Services Team Lead

This is where your work makes a difference. At Baxter, we believe every person—r...
Location
Location
United States , Macon
Salary
Salary:
52800.00 - 72600.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or GED
  • 8+ years of hands-on experience with medical devices or FDA-regulated products
  • 2+ years of driving or delivery experience
  • Valid driver's license and ability to obtain and maintain a DOT medical card
  • Ability to read and apply technical manuals, schematics, and service documentation
  • Strong communication skills and the ability to lead technical work independently and collaboratively
  • Comfort using Microsoft Office and adapting to new technologies
  • Flexibility for on-call work, occasional overtime, and occasional overnight travel
Job Responsibility
Job Responsibility
  • Lead daily work distribution for service center staff, coordinating field and warehouse activities to meet operational and customer needs
  • Perform advanced diagnostics, troubleshooting, and complex repairs on Baxter medical devices using service documentation and specialized test equipment
  • Support product readiness through preventive maintenance (PM), between-patient inspections (BPI), and equipment modifications
  • Train and support technicians on Baxter products and services at the service center, territory, and area levels
  • Manage inventory accuracy, parts usage, and service revenue activities in alignment with service contracts
  • Monitor dashboards and key metrics, coaching the team toward safety, quality, and performance goals
  • Partner with Operations, Sales, Service teams, and customers to resolve issues and improve service outcomes
  • Participate in on-call coverage and provide 24/7 delivery, removal, and service support as required
What we offer
What we offer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Educational assistance programs
  • Paid holidays
  • Paid time off ranging from 20 to 35 days based on length of service
  • Family and medical leaves of absence
  • Paid parental leave
  • Fulltime
Read More
Arrow Right