CrawlJobs Logo

Sr. RF Engineer

redwirespace.com Logo

Redwire Space

Location Icon

Location:
United States , Longmont

Category Icon

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

110000.00 - 150000.00 USD / Year

Job Description:

Unlock the Future of Space at Redwire Space. Do you thrive on turning the impossible into reality? At Redwire Space, every day presents an opportunity to innovate, tackle fascinating challenges, and directly shape future technologies for multiple domains (space and terrestrial). Redwire is where groundbreaking ideas take flight, and the results are truly out of this world. Innovate with Our RF Systems Group in Longmont, Colorado. Join Redwire's RF Systems group in Longmont, Colorado, and become an integral part of engineering the next generation of RF products. These enable mission-critical capabilities across space, air, land, and beyond. Whether it's advanced communications, sophisticated sensing, electronic warfare, or directed energy, our team delivers cutting-edge solutions — from orbital deployments to the tactical edge — in support of one force, every front. Join a Team Driven by Curiosity, Purpose, and Impact. Decide today to become a part of our engineering team and you'll find yourself in a collaborative, agile environment where curiosity, purpose, and impact guide every decision. We are not just a company; we are a collective renowned for our technical expertise, leadership in engineering, and unwavering commitment to project ownership. Come experience a place where your contributions truly matter. Redwire Space Solutions has an opportunity for a Sr. RF Engineer (RF Engineer, Senior) at our facility in Longmont, CO. In this role, you will support the development of RF architectures, design new systems and see them through the development life cycle. We are building RF systems for new space and multiple domain communications architectures.

Job Responsibility:

  • Support the development, qualification, and delivery of high-performance RF systems for space and multi domain environments
  • Apply engineering principles to ensure designed components and systems meet all requirements such as operational frequency range, signal to noise ratio, system linearity, and stability
  • Interface with multi-disciplinary team members to optimize component and system designs that meet all technical, cost and schedule requirements
  • Utilize industry standard design and analysis techniques to perform research and development, iterate on design concepts, correlate engineering models, and help develop RF test processes and procedures
  • Provide technical support during flight build, test, and delivery. Collect and process measurement data to verify specifications
  • Support the development, management, and maintenance of system designs and their associated documentation - CAD, Drawings, BOMs, etc.

Requirements:

  • B.S. in Electrical Engineering, Applied Mathematics, or Physics with focus in RF design and analysis with 5+ years of industry/related experience, or M.S. with academic experience
  • Experience as an RF engineer in development, qualification, and delivery of hardware
  • Knowledge of RF simulation techniques and software
  • Experience running standard RF characterization tests using test equipment such as vector network analyzers, spectrum analyzers, signal generators and power meters
  • Experience with preparing content for project stage-gate meetings (such as PDR, CDR, etc.)
  • Must be a US Citizen or US Person as defined by ITAR

Nice to have:

  • Background designing hardware for satellites, UAVs, or other platforms with limited size and/or power budget
  • Strong understanding of design for manufacturability and experience optimizing designs for testability and production
  • Experience with Ansys HFSS and Keysight ADS. Alternatively, experience with other RF Finite Element and Method of Moments simulation software is highly desirable
  • Experience designing antennas and/or RF electronic systems
  • Proficient with Microsoft Office 365, including SharePoint and Team
  • Ability to thrive and deliver in a fast-paced environment
  • Strong attention to detail with advanced verbal and written communication skills
What we offer:

Highly competitive benefits package

Additional Information:

Job Posted:
February 13, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Sr. RF Engineer

Sr RAN Optimization Engineer

Location
Location
United States , Overland Park
Salary
Salary:
Not provided
digitalplussolutions.com Logo
Digital Plus Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master’s degree in Electrical Engineering, Telecommunications, or related discipline, plus at least six years of related experience is required, or in the alternative, Bachelor’s degree in Electrical Engineering, Telecommunications, or related discipline, plus at least eight years of related experience is required
  • Must have experience with antennas for various bands, including mmWave, CBand, PCS, AWS, and low band of cellular communication operations and Distributed Antenna System (DAS) design & optimization
  • Must have experience with large venue stadium, Indoor Arena DAS design-implementation-optimization, Beamforming, MassiveMIMO, Baseband, Radios, NR & LTE air interface architecture, and 5G protocol and radio interference algorithms
  • Must have experience with load balancing across carriers, Carrier Aggregation techniques across carriers, 4G & 5G voice Network (including VOLTE and VONR), operational algorithm design and optimization, air interface capacity and coverage evaluation and improvement techniques
  • Must have experience with 5G Core and transport network architecture, 5G NSA (non-standalone), SA (stand-alone) principles algorithms for multiple vendor equipment, and 5G oRAN architecture and operation algorithms
  • Must have experience with platforms of Network tools for major radio vendors including ENM, OSS, Atoll , NetAct, Excel, and Scripting
Job Responsibility
Job Responsibility
  • Oversee a team of RF (Radio Frequency) engineers and work independently to perform RF network planning and optimization activities during network rollout phase
  • Responsible for radio optimization of 5G/LTE (Long Term Evolution) networks to troubleshoot and improve KPIs in Nokia & Ericsson system
  • Provide 5G optimization covering Sub6 optimization, DSS optimization, mmWave (millimeter wave) Optimization, VONR (Voice over New Radio)
  • Perform RF performance activities covering 4G/5G data & voice VOLTE (voice over LTE) service in customer projects independently, according to project plan and in project managers guidance
  • Perform analysis of Key Performance Indicators (KPI’s), investigation and improvement of network capacity & quality problems
  • Implement new features and tuning 5G/4G (LTE) radio network parameters
  • Implement new RAN (Radio Access Network) features and tuning of RAN database parameters
  • Analyze neighbor relations and implementation of corrections
  • Perform radio propagation planning, optimization of coverage footprint, signal quality, candidate selection review for new sites, creation of site plumbing design diagram, filing of E911/FCC Regulatory approvals and managing of design related projects
  • Perform radio planning and optimization team lead for small team of engineers
Read More
Arrow Right
New

Sr. RF Systems Engineer

Blue Canyon Technologies, RTX's small satellite manufacturer and mission service...
Location
Location
United States , Lafayette
Salary
Salary:
108000.00 - 200000.00 USD / Year
bluecanyontech.com Logo
Blue Canyon Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years of related experience
  • BS degree or higher in Engineering or a related technical field is required
  • Experience as a spacecraft systems engineer, RF subsystem engineer, RF subsystem test engineer
  • Skilled with RF system design or RF system testing
  • Demonstrated capability in the use of RF test equipment including power meters, spectrum analyzers, network analyzers and RF modems
  • Strong systems engineering skills in RFI/EMI and mitigation
  • Must be able to work in a highly collaborative, fast-paced environment
  • Experience in all phases of the program life cycle (business development, mission formulation, requirements flow-down, manufacturing, integration and test, and on-orbit operations)
  • Experience in space communication system design, link budget analysis, component specification/procurement, RF system testing and on-orbit operations
  • Ability to conceive and develop RF communications designs across a diverse set of customer needs
Job Responsibility
Job Responsibility
  • Detail-oriented and learning big-picture view, skilled at problem-solving and prioritizing time
  • Competent with RF Systems requirements development, verification techniques, subsystem design and link analyses, with growing ability to teach others these skills
  • Competent with RF Systems layout and impacts to other subsystems, skilled in the standard configuration and interfaces, with growing ability to assess non-standard configurations and interfaces and the impacts to other systems
  • Experienced with the RF subsystem component details and understands how changes may impact the system
  • Regular interaction with hardware suppliers and BCT subcontracts with minimal oversight
  • Develop hardware procurement documentation
  • Skilled with RF subsystem testing, efficiency improvements, performing RF testing, leading RF NCR investigations, reviewing test results and creating test reports
  • Provide valuable input to system level tests that make use of the RF system
  • Ensure testing follows all safety guidelines. Creates and modifies test plans, can tailor testing for specific program requirements for efficiency and continuous improvement
  • Skilled with mission concept of operations including identification of problems, able to compose new space-to-ground ICD and providing lead RF support to mission operations across diverse missions
What we offer
What we offer
  • Employer sponsored health, dental, and vision benefits effective the first of the month following hire date
  • Life insurance
  • 401k (matching 4% with a minimum 5% contribution)
  • Generous PTO (3 weeks of vacation + 3 floating holidays, 2 weeks of sick time, 7 paid holidays throughout the year) and parental leave
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer

The Sr. EE / HW Engineer will own critical aspects of the electrical architectur...
Location
Location
United States , Santa Clara
Salary
Salary:
Not provided
anellophotonics.com Logo
ANELLO
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSEE or MSEE degree with emphasis on Analog, Mixed Signal, and DSP Design
  • 7+ years’ experience with schematic design, ideally w/Altium for schematic capture and board layout
  • Experience in system designs from concept to mass production
  • Experience with sensor integration including MEMS and GNSS RF design
  • Front-end power supply protection for products
  • Communication buses including RS-232, RS-422, CAN, Ethernet, SPI
  • Track record of delivering working product at product-oriented companies
  • Excellent communications skills
  • Passion for continuous learning and exploring new technologies is highly valued
  • Applicants must be authorized to work in the United States without sponsorship (U.S. citizenship or Perm Residence)
Job Responsibility
Job Responsibility
  • Ownership of electrical product design from concept to delivery to manufacturing, proactively anticipating and addressing potential roadblocks
  • Create interface boards and systems for manufacturing
  • Manage electrical engineering CAD tools and libraries
  • Work with hardware team to select components and write hardware design specifications for board level assemblies
  • Design schematics and board layouts of medium to high complexity mixed signal PCBA
  • Work closely with Sr ME to ensure board fitment, clearances, and thermal issues are considered during board layout
  • Export accurate manufacturing info to key vendors to ensure board fabrication quality
  • Export accurate BOM information to purchasing team
  • Inspect first articles for IPC610 workmanship
  • Assist with board bring up, debug and standard EE lab work
  • Fulltime
Read More
Arrow Right

Sr Electrical Engineer I

Sr. Electrical Engineers at Dedrone have full design ownership over next‑generat...
Location
Location
United States , Sterling
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field
  • Proven experience in electrical design and system integration for complex hardware products—ideally in aerospace, defense, robotics, or wireless systems
  • Proficiency with schematic capture and PCB layout tools (e.g., Altium, OrCAD, KiCad) and experience with DFM/DFX practices
  • Strong embedded firmware experience in C/C++ (RTOS and bare‑metal), bootloaders, and hardware abstraction layers
  • familiarity with microcontrollers (ARM Cortex family, ESP32, STM32) and single‑board computers (Raspberry Pi) a plus
  • Hands‑on experience with RF front‑ends, antenna integration, and familiarity with wireless protocols relevant to cUAS (Wi‑Fi, LTE, custom radios)
  • experience with spectrum analysis and RF test equipment
  • Expertise in power electronics design: battery management systems, DC/DC converters, power sequencing, and thermal management for electronics
  • Solid understanding of signal integrity, power integrity, EMI/EMC mitigation techniques, and relevant test/qualification methods
  • Experience with schematic/PCB review processes, design reviews, and partner manufacturing to move designs to production
Job Responsibility
Job Responsibility
  • Lead electrical system and subsystem development from concept through production, ensuring designs meet safety, EMC, and reliability standards
  • Define electrical architectures for sensors, radios, power distribution, and control electronics for cUAS platforms
  • Design and review schematics and perform PCB layout for mixed‑signal and RF boards
  • partner with mechanical for packaging and thermal constraints
  • Develop, validate, and optimize power systems (battery management, DC/DC, power sequencing) and ensure robust operation under shock, vibration, and extreme temperatures
  • Implement and integrate embedded firmware for real‑time control, sensor fusion, communications stacks, and boot/load mechanisms
  • Perform hardware bring‑up, debugging, and system integration
  • use lab instrumentation (oscilloscopes, spectrum analyzers, logic analyzers) to characterize performance
  • Conduct electrical analysis including signal integrity, power integrity, EMI/EMC mitigation, thermal considerations, and reliability testing
  • Produce high‑fidelity prototypes and iterate quickly to qualify designs
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Sr Electrical Engineer

The Laboratory for Laser Energetics (LLE) of the University of Rochester is a un...
Location
Location
United States of America , Rochester
Salary
Salary:
86482.00 - 129723.00 USD / Year
urmc.rochester.edu Logo
University of Rochester
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • PhD in Electrical Engineering and 3 years of experience or MSEE and 6 years of experience or equivalent training and experience
  • Ability to demonstrate a theoretical and hands-on knowledge of: Design, assembly, documentation, testing and troubleshooting electronic circuits and systems
  • Laboratory electrical measurement techniques, including high-bandwidth oscilloscopes and RF or microwave test equipment
  • CAD schematic capture
  • Component level circuit design and troubleshooting
  • Circuit simulation with SPICE or equivalent
  • Understanding of lumped and distributed circuit analysis
  • Ability to work to a budget and schedule
Job Responsibility
Job Responsibility
  • Designs, optimizes, and maintains electrical systems, while also staying updated with emerging technologies and industry standards
  • May provide leadership, manage projects, and mentor junior colleagues
  • Ensures compliance with safety and regulatory standards
  • Design and support custom high-speed/high-bandwidth electrical circuits and systems used on high power experimental laser systems
  • Working independently with scientists and engineers from other disciplines in a team environment writing requirements, presenting project reviews, designing/fielding custom equipment, and documenting final assemblies
  • Fulltime
Read More
Arrow Right

Npi Quoting Engineer Sr

This Engineer Senior position plays a key role in supporting business growth by ...
Location
Location
Mexico , Tijuana
Salary
Salary:
Not provided
themuse.com Logo
The Muse
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3-5 years of experience in similar positions
  • Bachelor's degree in an engineering discipline or similar field
  • English proficiency greater than 90% (spoken, written, and reading)
  • Demonstrated ability to lead projects and coordinate multidisciplinary teams
  • Solid experience with manufacturing processes (ultrasonic machines, RF, sterile barrier packaging, plastic component unions, mechanical assemblies)
  • Advanced interpretation of 2D/3D drawings
  • Strong communication skills (written and verbal) and effective decision-making
  • Intermediate negotiation and conflict resolution skills
  • Familiarity with regulatory standards (FDA, ISO) and basic understanding of compliance requirements
  • Advanced proficiency in Microsoft Office (Word, Excel, PowerPoint, Project)
Job Responsibility
Job Responsibility
  • Manage high complexity quoting projects and their quote development process. May run multiple projects at one time
  • Define strategic quoting scope (high complexity) and align with organizational objectives
  • Internally monitors the day-to-day activities of all quoting projects and supervise cross-functional collaboration and resolve critical issues
  • Lead pricing strategy structure in collaboration with management as required
  • Coordinates review sessions on pricing strategies with internal customers based on requested quotes
  • Contribute to good documentation practices, ensuring that quote proposals and approvals are documented and up to date
  • Update quote status for proposals in process in quoting database
  • Develop and optimize procedures for efficient quotation management
  • Manage and implement effective communication systems for decision-making
  • Lead improvement projects and innovation initiatives
What we offer
What we offer
  • Health Insurance
  • Dental Insurance
  • Vision Insurance
  • FSA
  • HSA
  • On-Site Gym
  • Health Reimbursement Account
  • Life Insurance
  • Short-Term Disability
  • Long-Term Disability
  • Fulltime
Read More
Arrow Right

Sr Engineers, Systems Design

Sr Engineers, Systems Design in Concord, CA, will perform site surveys to evalua...
Location
Location
United States , Concord
Salary
Salary:
184330.00 - 189330.00 USD / Year
https://www.t-mobile.com Logo
T-Mobile
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master’s degree in Telecommunications, or related, and 3 years of relevant work experience
  • Bachelor’s degree in Telecommunications, or related, and 5 years of relevant work experience
  • Working with Python, developing tools to help automate process and optimize existing tools improving efficiency and reducing errors
  • Leading roll-out for major projects like network modernization, bandwidth upgrades, new carrier additions using knowledge of cellular concepts such as LTE and 5G, Radio Access Network (RAN), OSI layer model and network gears like radios and routers
  • Using data analytics and dashboard building to foster a data-informed, automation-driven team including the following tools: Excel and PowerBI, Database Management including MySQL
  • Design of in-building Distributed Antenna Systems (DAS) using iBwave, Atoll, Excel for RF planning, antenna placement, power settings and cable routing. Working on commissioning and troubleshooting major DAS OEMs like JMA/Commscope/Solid with ability to track site and data in RAN OSS
  • Knowledge of project management methodologies to support major deployment programs including Agile and Waterfall, stakeholder management skills, risk planning and management, budget management, and vendor management using tools like MS Project
  • Conducting RF walk testing, site surveys, and system validation using tools such as Nemo, TEMS, and IBflex scanner, including CW (Continuous Wave) testing, pre-installation benchmark testing, live network data collection and analysis, Fiber OTDR testing, and ATP validation for in-building DAS systems
Job Responsibility
Job Responsibility
  • Develop end to end DAS and Small Cell Solutions
  • Model indoor propagation and capacity to determine antenna placement and equipment needs
  • Apply link budget analysis, high-capacity venues design, deployment standards, traffic analysis and optimization
  • Troubleshoot alarms or performance issues at existing systems
  • Audit existing system as-builts and perform annual system audits and testing
  • Design venues using iBwave design and capacity analysis tools
  • Collect and analyze engineering network data, network KPl's and business data
  • Provide insight, trends, and forecast data sets for engineering team and management to make technical and/or fiscal decision
  • Develop dashboards & tools to automate engineer and business processes
  • Driving cross functional operations and validation teams for Software Release Planning, Production network expansions and troubleshooting issues related to Voice over LTE, TCP/IP, LTE data, and EPC technologies
What we offer
What we offer
  • Competitive base salary and compensation package
  • Annual stock grant
  • Employee stock purchase plan
  • 401(k)
  • Access to free, year-round money coaches
  • Annual bonus or periodic sales incentive or bonus based on role
  • Medical, dental and vision insurance
  • Flexible spending account
  • Paid time off and up to 12 paid holidays
  • Paid parental and family leave
  • Fulltime
Read More
Arrow Right

Sr. Lab Technician

3dB Labs is a growing Defense Contractor focusing on Digital Signal Processing S...
Location
Location
United States , West Chester
Salary
Salary:
Not provided
3db-labs.com Logo
3dB Labs
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s or Bachelor’s degree in engineering technology or similar
  • Experience with Linux a plus
  • Practical understanding of RF fundamentals and measurement techniques
  • Hands-on experience working and maintaining an electronics lab environment
  • Familiarity with lab test equipment including DMMs, signal generators, spectrum analyzers, and oscilloscopes
  • Capable of working independently and training jr. team members
  • Technical writing skills a plus
  • 5-10 years experience
  • US citizenship is required for all of our positions
Job Responsibility
Job Responsibility
  • Set up, configure, and maintain lab environments, including benches, racks, and test stations
  • Operate and maintain test equipment such as oscilloscopes, spectrum analyzers, signal generators, VNAs, power supplies, thermal chambers, and other specialized equipment
  • Support engineers during development, validation, and debug activities
  • Perform basic hand soldering of electrical components, and cable construction
  • Ensure proper calibration, certification, and maintenance of lab equipment
  • Manage lab inventory, including cables, connectors, antennas, fixtures, electrical components, PC hardware, consumables, etc.
  • Maintain lab documentation, test procedures, safety guidelines, and equipment logs
  • Troubleshoot lab hardware, test setups, and measurement inconsistencies
  • Enforce lab safety, ESD coordination and compliance, and best practices
  • Coordinate with vendors for equipment repair, upgrades, and calibration services
  • Fulltime
Read More
Arrow Right