CrawlJobs Logo
ASML Logo ASML · IT - Software Development

Sr Manufacturing Engineer

United States, San Diego Employment contract 102375.00 - 153563.00 USD / Year · Job Posted June 15, 2026
Apply Position
Job Link Share

Job Description

The Manufacturing Engineer in EUV designs, develops implements, and maintains methods, operation sequence and processes in the manufacture, fabrication, testing and troubleshooting of parts, components, sub-assemblies, ensuring Design for Manufacturability and Assembly, final assemblies and systems as well as system hardware and software interface and system controls.

Job Responsibility

  • Drive end-to-end manufacturing transfer of complex products across global sites
  • Develop and execute transfer strategy, including risk assessment and mitigation plans
  • Create complete transfer packages (process flows, work instructions, tooling specs, BOM/routing, control plans)
  • Establish and qualify new Workcenter, including layout, tooling, and equipment validation
  • Ensure replication of production performance (yield, quality, throughput, safety)
  • Lead build validation, ramp-up, and production readiness reviews at receiving factory
  • Identify and close gaps between source and target factory capabilities
  • Partner with cross-functional teams (Engineering, Operations, Quality, Supply Chain) across global sites
  • Drive knowledge transfer, training, and documentation standardization
  • Evaluates prototype and manufacturing practices to develop optimized process flows to ensure repeatability and quality
  • Writes requirements documents and serves as advocate in design process for Design for Assembly/Design for Manufacturability principals
  • Leads and/or participates as a member of cross-functional and cross-site teams
  • Validates build/test sequence and material allocations
  • Write and validate assembly and test processes and procedures to be used in manufacturing
  • Evaluates and analyzes data acquired during tests
  • Makes recommendations for process or design modifications based on analysis
  • Serves as a mentor to less experienced team members on root cause analysis and problem solving methodologies and statistical analysis/process control
  • Check compliance to procedures and guidelines regarding quality, safety and health across areas and teams
  • Encourages safety mindset and acts as role model to others in regard to health and safety and holds others accountable
  • Follow ASML's HS&E policies, procedures and mandatory instructions
  • Is able to do a Last Minute Risk Assessment and guides others
  • Performs other duties as assigned

Requirements

  • Bachelor degree in a technical domain (mechanical engineering, mechatronics, electrical engineering, physics)
  • Master degree in a technical domain (mechanical engineering, mechatronics, electrical engineering, physics)
  • Minimum of five (5) years of experience is preferred in Process Engineering, Industrial Engineering or Manufacturing Engineering
  • Experience with factory transfer, line replication, or new site setup
  • Experience with complex assemblies, precision tooling, or high-tech manufacturing environments
  • Experience with MRP system
  • SAP preferred
  • Systems engineering and interaction experience – hardware and software interface
  • Some software, controls experience preferred
  • Experience working with MRP system, SAP preferred
  • Experience in executing improvement projects with LEAN Manufacturing concepts
  • Ability to analyze and translate data to effectively report problems through written and/or graphical formats
  • Ability to multi-task and set priorities without jeopardizing project schedule
  • Data driven decision maker, good negotiation skills, positive attitude
  • Able to read technical drawings and interpret specifications
  • Able to define Bill of Material structure in support of defined build sequence
  • Must be comfortable with a rapidly changing work environment
  • Excellent written, verbal communication and presentation skills
  • Stakeholder management
  • Energetic, enthusiastic and self-starter
  • Comfortable to work in cleanroom environment
  • Multitasking, priority setting and risk management
  • Team focused but individually accountable
  • Strong technical skills and hands on and desire to be the Subject Matter Expert
  • In depth knowledge of MS Word, Excel, PowerPoint, JMP/Minitab

Nice to have

  • Design and manufacturing requirement definition
  • Strong electrical and mechanical experience
  • NX siemens and Solidworks Knowledge
  • Test Plan and data analysis, GR&R, Anova
  • Vacuum system
  • Cleanroom experience (ISO4-6)
  • Tooling and packaging development

What we offer

  • Medical
  • Dental
  • Vision
  • 401(K)
  • Life insurance
  • Eight (8) hours of vacation leave every month
  • (13) paid holidays throughout the calendar year
ASML - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Sr Manufacturing Engineer

8 matching positions

Sr Manufacturing Engineer

The Senior Manufacturing Engineer is a key site operations representative. The M...
Location
Location
United States , Hayward
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Science of Mechanical, Biomedical or Electrical Engineering
  • 3-5 years of experience in the Maintenance/Engineering field in a Pharmaceutical or Medical device manufacturing industry, preferred
  • Experience with statistical analysis with tools as Minitab or SAS, preferred
  • Experience with Microsoft Office Suite
  • Green Belt, Black Belt or PMP certification preferred
  • Ability to identify, define, and solve complex problems using a data-driven problem solving approach (i.e. DMAIC)
  • Technical writing ability for protocol generation, execution, and reporting to qualify processes and equipment
  • Strong technical skillset in the area of manufacturing engineering: design for manufacturability (DFM), EH&S guidelines, GMP/GDP guidelines, and process validation
  • Excellent problem-solving, organizational, analytical and critical thinking skills
  • Effective communication and interpersonal skills at all levels of employees, suppliers, and consultants
Job Responsibility
Job Responsibility
  • Drive continuous improvement in production performance, quality, and reliability through data-driven analysis, RCFA, FMECA, and statistical tools (SPC, SQC, DOE, Minitab, InfinityQS)
  • Provide hands-on technical support for manufacturing equipment and automation, ensuring optimal performance, maintenance, and compliance with regulatory and safety requirements
  • Lead nonconformance investigations (CAPA/NCR), including root cause analysis, corrective/preventive actions, effectiveness checks, and timely reporting to review boards and management
  • Partner with Manufacturing to implement lean principles and process improvements, supporting process validation (IQ/OQ/PQ), PFMEA, and overall product assembly optimization
  • Maintain accurate, compliant engineering and quality documentation (e.g., validation plans, protocols, reports) and prepare failure analysis reports to prevent recurring issues
  • Manage and support projects within budget and operational constraints, including capital planning, while delivering on Safety, Quality, Service, Cost, and Schedule objectives
  • Monitor and improve key production metrics (labor, yield, lead time, capability) through daily engagement with manufacturing and proactive data analysis
  • Ensure compliance with safety, GMP, and environmental regulations, including EHS standards, required training, and oversight of regulated systems and operations
  • Complete all required project updates, training, and administrative deliverables in a timely and accurate manner
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • medical and dental coverage that start on day one
  • insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Sr Manufacturing Engineer

The Senior Manufacturing Engineer is a key site operations representative. The M...
Location
Location
United States , Hayward
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Science of Mechanical, Biomedical or Electrical Engineering
  • 3-5 years of experience in the Maintenance/Engineering field in a Pharmaceutical or Medical device manufacturing industry, preferred
  • Experience with statistical analysis as Minitab or SAS, preferred
  • Experience with Microsoft Office Suite
  • Green Belt, Black Belt or PMP certification preferred
  • Ability to identify, define, and solve complex problems using a data-driven problem solving approach (i.e. DMAIC)
  • Technical writing ability for protocol generation, execution, and reporting to qualify processes and equipment
  • Strong technical skillset in design for manufacturability (DFM), EH&S guidelines, GMP/GDP guidelines, and process validation
  • Excellent problem-solving, organizational, analytical and critical thinking skills
  • Effective communication and interpersonal skills at all levels
Job Responsibility
Job Responsibility
  • Drive continuous improvement in production performance, quality, and reliability through data-driven analysis, RCFA, FMECA, and statistical tools
  • Provide hands-on technical support for manufacturing equipment and automation, ensuring optimal performance, maintenance, and compliance
  • Lead nonconformance investigations (CAPA/NCR), including root cause analysis, corrective/preventive actions, effectiveness checks, and timely reporting
  • Partner with Manufacturing to implement lean principles and process improvements, supporting process validation (IQ/OQ/PQ), PFMEA, and overall product assembly optimization
  • Maintain accurate, compliant engineering and quality documentation and prepare failure analysis reports
  • Manage and support projects within budget and operational constraints, including capital planning
  • Monitor and improve key production metrics through daily engagement with manufacturing
  • Ensure compliance with safety, GMP, and environmental regulations
  • Complete all required project updates, training, and administrative deliverables in a timely and accurate manner
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Sr Manufacturing Engineer

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
United States , Hayward
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Science of Mechanical, Biomedical or Electrical Engineering
  • 3-5 years of experience in the Maintenance/Engineering field in a Pharmaceutical or Medical device manufacturing industry, preferred
  • Experience with statistical analysis with tools as Minitab or SAS, preferred
  • Experience with Microsoft Office Suite
  • Green Belt, Black Belt or PMP certification preferred
  • Ability to identify, define, and solve complex problems using a data-driven problem solving approach (i.e. DMAIC)
  • Technical writing ability for protocol generation, execution, and reporting to qualify processes and equipment
  • Strong technical skillset in the area of manufacturing engineering: design for manufacturability (DFM), EH&S guidelines, GMP/GDP guidelines, and process validation
  • Excellent problem-solving, organizational, analytical and critical thinking skills
  • Effective communication and interpersonal skills at all levels of employees, suppliers, and consultants
Job Responsibility
Job Responsibility
  • Drive continuous improvement in production performance, quality, and reliability through data-driven analysis, RCFA, FMECA, and statistical tools (SPC, SQC, DOE, Minitab, InfinityQS)
  • Provide hands-on technical support for manufacturing equipment and automation, ensuring optimal performance, maintenance, and compliance with regulatory and safety requirements
  • Lead nonconformance investigations (CAPA/NCR), including root cause analysis, corrective/preventive actions, effectiveness checks, and timely reporting to review boards and management
  • Partner with Manufacturing to implement lean principles and process improvements, supporting process validation (IQ/OQ/PQ), PFMEA, and overall product assembly optimization
  • Maintain accurate, compliant engineering and quality documentation (e.g., validation plans, protocols, reports) and prepare failure analysis reports to prevent recurring issues
  • Manage and support projects within budget and operational constraints, including capital planning, while delivering on Safety, Quality, Service, Cost, and Schedule objectives
  • Monitor and improve key production metrics (labor, yield, lead time, capability) through daily engagement with manufacturing and proactive data analysis
  • Ensure compliance with safety, GMP, and environmental regulations, including EHS standards, required training, and oversight of regulated systems and operations
  • Complete all required project updates, training, and administrative deliverables in a timely and accurate manner
What we offer
What we offer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount
  • 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching
  • Flexible Spending Accounts
  • Educational assistance programs
  • Time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave
  • Commuting benefits
  • Employee Discount Program
  • Employee Assistance Program (EAP)
  • Fulltime
Read More
Arrow Right

Sr Manufacturing Engineer

We are looking for an experienced Sr Manufacturing Engineer to support engineeri...
Location
Location
United States , Clearwater
Salary
Salary:
Not provided
https://www.roberthalf.com Logo
Robert Half
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or Aeronautical/Aerospace Engineering
  • At least 8 years of experience in aerospace or advanced engineering environments with strong involvement in new product development
  • Proficiency in mechanical design and 3D modeling tools such as SolidWorks
  • exposure to CATIA or Creo is an advantage
  • Hands-on experience with structural or finite element analysis, design verification, and engineering review methods such as FMEA
  • Working knowledge of manufacturing methods including machining, welding, brazing, assembly, and product testing
  • Ability to interpret and apply GD&T principles and engineering drawing standards
  • Strong written and verbal communication skills with the ability to prepare technical documentation, specifications, and engineering procedures
  • Comfortable working between office and manufacturing settings, including occasional lifting up to 35 pounds and extended periods of sitting, standing, or walking
Job Responsibility
Job Responsibility
  • Guide the mechanical development of new products from concept review through qualification testing and ongoing product support
  • Build, update, and control 3D models and 2D drawings using SolidWorks, while applying analytical tools to assess structural performance when needed
  • Review designs through formal evaluation methods such as risk assessments and failure analysis to identify issues affecting reliability, function, and manufacturability
  • Verify that products and components meet applicable environmental and industry testing expectations, including aerospace-related standards where required
  • Coordinate external technical services by defining engineering needs, monitoring deliverables, and ensuring work is completed to quality and schedule expectations
  • Support multiple active programs at the same time, driving tasks forward from initial design through release and validation
  • Investigate technical and production-related problems using structured root cause methods and implement effective corrective actions
  • Partner with manufacturing teams on the shop floor to improve fixtures, tooling, and production processes while helping resolve day-to-day build issues
  • Oversee additive manufacturing activities, including support for 3D printing lab operations and related prototype development
  • Provide sustaining engineering assistance for existing products, including evaluation of part obsolescence and long-term design support
What we offer
What we offer
  • medical
  • vision
  • dental
  • life and disability insurance
  • 401(k) plan
Read More
Arrow Right

Engineer / Sr Engineer, Manufacturing Sciences & Technology (mRNA/LNP)

Beam is looking for a highly motivated Engineer/Senior Engineer to join our grow...
Location
Location
United States , Cambridge, MA
Salary
Salary:
100000.00 - 135000.00 USD / Year
beamtx.com Logo
Beam Therapeutics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Ph.D. in Chemical Engineering, Bioengineering, Biochemistry, or equivalent with minimum 6 years of relevant work experience
  • M.S. degree with a minimum of 8 years of relevant work experience
  • B.S. degree with a minimum 10 years of relevant work experience
  • Demonstrated experience in technology transfer, scale-up, and implementation of downstream unit operations, such as tangential flow filtration, normal flow filtration, and chromatography
  • Experience in executing Process Validation lifecycle approach
  • i.e. process design, PPQ, and CPV
  • Experience in leading cross-functional teams for non-conformance event investigations, Root Cause Analyses (RCAs), and CAPAs
  • Outstanding written, verbal, and presentation skills
  • ability to communicate strategies, plans, and results to a diverse audience
  • Ability to simultaneously manage multiple projects and priorities and adjust quickly to dynamic situations
Job Responsibility
Job Responsibility
  • Supports MS&T activities related to mRNA and LNP programs
  • Supports the technology transfer and implementation of mRNA and LNP GMP manufacturing processes, collaborates with sending and receiving site cross-functional team members
  • Supports bulk drug substance and bulk drug product manufacturing across the full product lifecycle, including process design, process performance qualification (PPQ), commercial production, and continued process verification (CPV)
  • Authors technical documentation, including technology transfer plans, facility fit and gap analysis reports, manufacturing study protocols and reports, and risk assessments
  • Supports equipment design to meet process needs and compliance/regulatory expectations
  • supports Engineering and Validation departments with subsequent procurement, qualification, and GMP readiness
  • Supports regulatory submissions, responses, on-site audits, and inspections
  • Represents MS&T in cross-functional teams related to mRNA/LNP programs and manufacturing operations
  • Provides person-in-plant (PIP) support in manufacturing at Beam Durham
  • Supports MS&T lab and non-GMP analytical testing of in-process intermediates, as needed
  • Fulltime
Read More
Arrow Right
New

Sr. Manufacturing Engineer

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great prod...
Location
Location
Taiwan , Miao-Li, Hsinchu, KaoHsiung
Salary
Salary:
Not provided
amd.com Logo
AMD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or MS in Electrical Engineering, Mechanical Engineering, Physics or related experience
  • Knowledge of high-performance Computing ASIC test process, in particular to active thermal control of ATE and system-level test (SLT)
  • > 5 years of experience in test hardware troubleshooting and maintenance
  • In-depth experience of active thermal control hardware development or troubleshooting capabilities
  • In-depth experience in BI/ATE/SLT equipment – tester, handler, test sockets
  • Experience in using statistical software such as JMP, Minitab or R language
Job Responsibility
Job Responsibility
  • Liaise with global AMD teams and the Suppliers to manage consigned test equipment in OSAT and ensure sufficient equipment to support production and engineering activities
  • Analyze and debug failing hardware
  • work with vendor to repair broken hardware
  • Perform equipment GR&R/MSA and resolve discrepancy
  • Improve equipment stability, availability and maintenance efficiency by analyzing performance matrices, MTBF, utilization and drive maintenance procedure optimization
  • Keep equipment operational by coordinating maintenance and repair services, following manufacturer's instructions and established procedures
  • Perform audits to ensure vendor and OSAT comply with AMD requirements
  • Perform data analysis to drive cost saving in repair and maintenance activities
  • Compile manufacturing KPIs and construct regular performance review reports
  • Drive continuous improvement in hardware management process
  • Fulltime
Read More
Arrow Right

Sr. Engineer, Manufacturing Engineering

At Baxter, we believe every person—regardless of who they are or where they are ...
Location
Location
Malta , Marsa
Salary
Salary:
32000.00 EUR / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering (Mechanical, Electrical, Manufacturing, or related field)
  • Minimum 3+ years of experience in a manufacturing environment
  • Strong ability to analyze statistical and process data and translate insights into actionable improvements
  • Experience with process improvement methodologies and tools (e.g., FMEA, SPC, Lean principles)
  • Ability to manage multiple priorities in a fast-paced manufacturing environment
  • Ability to work in a regulated environment and ensure compliance with quality and safety standards
  • Strong problem-solving skills with a proactive and resourceful mindset
  • Effective communication and collaboration skills to work with cross-functional teams and external partners
Job Responsibility
Job Responsibility
  • Perform routine and non-routine calibration and maintenance activities for analytical laboratory instruments in accordance with approved procedures and schedules
  • Plan, schedule, and manage calibration and maintenance activities performed by external service providers or equipment manufacturers, including supplier-calibrated instruments
  • Review service reports and calibration certificates to ensure completeness, accuracy, and compliance with internal procedures and regulatory expectations
  • Provide technical support in the event of instrument malfunctions or failures, including troubleshooting, root cause identification, and coordination with equipment manufacturers or service providers to resolve issues
  • Collaborate closely with Quality team members to ensure calibration and maintenance activities are aligned with quality system requirements, including data integrity, documentation standards, and change management processes
  • Ensure adherence to applicable Quality Systems, GLP principles, and regulatory requirements
  • actively participate in audit preparation, inspections, and responses to audit findings related to calibration and maintenance activities
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right

Sr. Engineer, Manufacturing Engineering

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
Malta , Marsa
Salary
Salary:
32000.00 EUR / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in Manufacturing industry 3+ years is required for Senior Bachelors Degree in Engineering field (Mechanical, Electrical or Manufacturing)
  • Ability to interpret and analyze statistical data and information and financial reports, understand, and resolve technical difficulties, interface with internal engineering/technical experts and external technical representatives, manage multiple priorities in a manufacturing plant setting, and be resourceful to a large manufacturing department.
Job Responsibility
Job Responsibility
  • Ensure products are provided to customers on time so that product quality, yield, operating costs and process efficiencies are met
  • Responsible for assuring compliances to all regulatory requirements – FDA, OSHA, OFCCP, EPA, etc
  • Adheres to all environmental, health and safety SOPs, equipment, policies and procedures, including any process specific requirements
  • Perform analytical review, recommend, and implement corrective action for any exception condition
  • Identify/Execute/Implement process specific improvements within all production areas arising from both quality and performance issues
  • Areas of focus include: DPM, Conversion loss, SPC, CIPM, FMEA, EPC, Digitization and iCare
  • Support Maintenance Activities and upkeep of respective documentation
  • Maintain and update departmental Standard Local Operating Procedures
  • Support plant-wide strategic plan programs and activities
  • Reporting directly to the Maintenance Area Principal Engineer
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right