Specialty Mechanical Equipment Engineer Job at Amentum (Oak Ridge)

Engineer Reliability Fixed Equipment

HF Sinclair in El Dorado, KS is seeking a Fixed Equipment Engineer. This positio...

Location

United States , El Dorado

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of eight years of progressive work experience in a specific engineering discipline and project management experience is required
Emphasis on plant or refinery engineering, fixed equipment and/or mechanical integrity is required
A minimum of a Bachelor's Degree in engineering discipline is required
Technical expert in area of specialty
Advanced ability to stay abreast of new technology developments and processes and apply knowledge analytically
Strong knowledge of Microsoft products and commonly used engineering concepts and experience with engineering software
Familiarity with standards and practices of the specific discipline
Ability to effectively communicate with others, both written and verbal communication, advanced reading and writing skills, with the ability to perform advanced mathematical calculations
Ability to operate and drive all assigned company vehicles at company standard insurance rates is essential
Valid state driver's license and proof of insurance required

Job Responsibility

Defines engineering projects by determining objectives, evaluating technical strategies, and providing plant-engineering support to assigned business unit(s)
Plans and leads engineering work by writing specifications, developing schedules and budgets, and identifying improvements to existing equipment, inspection practices, and mechanical integrity programs
Implements engineering solutions by monitoring performance, coordinating with Operations/Inspection/Maintenance, taking corrective actions, updating procedures and reports, and securing materials, supplies, and services
Completes projects by delivering final outputs, closing administrative requirements, and evaluating overall project performance, including lessons learned for future inspection, maintenance, and reliability work
Analyzes the economics of each project where appropriate
calculates ROI for proposed projects
Provides engineering documentation, mechanical integrity analysis, operating analysis, and recommendations for management
Supports mechanical integrity initiatives, including fixed equipment evaluations, repair plans, inspection scope development, and root-cause investigations
Develops and improves procedures for inspection, maintenance, and engineering tasks to enhance consistency, effectiveness, and compliance with applicable standards
Collaborates with multi-disciplinary teams (Operations, Maintenance, Inspection, Process) to prioritize and execute reliability and mechanical integrity improvements

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Principal Mechanical Engineer

Are you a licensed Mechanical Engineer with a passion for designing complex, hig...

Location

United States , Salt Lake City

Salary:

Not provided

Spectrum Engineers

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering
Professional Engineer (PE) license
10+ years of mechanical engineering experience, with at least 2 to 5 years focused on healthcare projects
Proficiency in Revit, AutoCAD, and mechanical system modeling tools (e.g., Trane Trace, EnergyPlus, or similar)
In-depth understanding of ASHRAE, NFPA 99, FGI Guidelines, and healthcare HVAC and plumbing system requirements
Strong communication and problem-solving skills

Job Responsibility

Lead mechanical engineering team efforts for mid-to-large healthcare projects, including hospitals, outpatient clinics, and specialty medical facilities
Be a ‘seller-doer’ by leading business development activities to find and build client relationships and win projects
Collaborate with architects, project managers, and consultants to design mechanical systems that meet project requirements, codes, and healthcare-specific standards
Develop HVAC and plumbing systems designs using Revit and other industry-standard tools
Perform load calculations, energy modeling, equipment selection, and system sizing specific to healthcare facilities
Prepare and oversee construction documents, including drawings, specifications, and schedules
Participate in client meetings and site visits to review progress, resolve issues, and provide construction phase support
Ensure mechanical system designs meet ASHRAE, NFPA, FGI, and state/local healthcare codes
Guide and mentor junior engineers and designers within the mechanical team
Support project budgeting, scheduling, and coordination with internal teams and external stakeholders

What we offer

High compensation with a profit/bonus accountability system
Complete financial transparency on your projects
Employee ownership opportunities of company stock
Full medical, dental, and life insurance
401k matching with 200% of your contributions up to 6%

Fulltime

Fleet Field Technician

The Fleet Technician performs diagnostics, maintenance, and repairs on various c...

Location

United States , Cincinnati

Salary:

Not provided

Southeast Utilities of Georgia LLC

Expiration Date

Until further notice

Requirements

Submit to and successfully complete a background check, pre-employment drug test, MVR, and DOT physical
Proven history of heavy equipment experience
High school or equivalent education
Valid driver’s license
Ability to understand mechanical and construction terminology
Ability to operate welding equipment
Ability to operate diagnostic computers for equipment and trucks
Working knowledge and skill in body work, fabrication, welding and torching, computer diagnostics, hydraulic and construction equipment mechanics, automotive mechanics, electrical work, etc.
Ability to use basic math skills to compute measurements, liquid volumes, material strength, timecards, etc.
Ability to compute fuel to air ratios, gear ratios, etc.

Job Responsibility

Diagnose, maintain, and repair various construction equipment, on-highway vehicles, and trailers using basic and specialty test equipment either mechanical or electronic
Troubleshoots and replaces various components such as valves, hoses, fittings, tanks, pumps etc. in hydraulic systems
Troubleshoots and repairs complex wiring for systems such as the utility booms, chassis, and engine wiring
Navigate electronic service manuals, wiring diagrams, hydraulic schematics, and parts catalogs
Performs basic fabrication and welding using MIG, ARC, OXY Acetylene, Torch, grinders, and other fabricating tools
Performs preventative maintenance and BIT / DOT inspections including wet and dry PM services and repairs that need to be addressed during BIT inspection findings
Raises trucks, trailers or other equipment using hydraulic or air assisted jacks or hoists in a safe practice
Replaces worn or defective brake components including tire replacement
Diagnoses and repairs air conditioning systems
Fully follow dealership and manufacturer service guidelines

Fulltime

Mechanical Tooling/Equipment Design Engineer

We are seeking a highly skilled and motivated Mechanical Tooling/Equipment Desig...

Location

United States , Luling

Salary:

Not provided

X-Bow Systems

Expiration Date

Until further notice

Requirements

Bachelor's degree or higher in Mechanical Engineering or a related technical field
Proven experience in mechanical design, analysis, test, and hands-on assembly/integration, preferably within the aerospace, automotive, or heavy manufacturing industries
Proficiency in CAD software (e.g., SolidWorks) and PDM systems
Strong understanding of engineering fundamentals in structural mechanics, fluid dynamics, and thermal analysis
Demonstrated capability in conducting FMEA and applying GD&T (Geometric Dimensioning and Tolerancing) best practices
Experience in creating, tracking, and verifying requirements throughout a design process
Excellent written and verbal communication skills, with the ability to present complex technical information to diverse audiences
Ability to work both independently and as part of a dynamic, fast-paced team
Must be a U.S. Person as defined by § 120.62 of the ITAR, and able to obtain and maintain a Secret clearance

Job Responsibility

Design and Development: Design new and modify existing specialty equipment, manufacturing tooling, jigs, fixtures, molds, mandrels, and lifting devices using modern CAD software (e.g., SolidWorks)
Requirements Management: Create, track, and trace requirements throughout the entire design lifecycle, ensuring all hardware meets or exceeds internal and customer specifications
Analysis and Review: Conduct thorough engineering analyses, including Failure Modes and Effects Analysis (FMEA), hand calculations, and Finite Element Analysis (FEA) for structural integrity, to predict performance and resolve instabilities
Documentation and Review: Prepare and present design reviews to internal stakeholders and leadership, publishing results and documentation for peer review and feedback
Collaboration: Work closely with cross-functional teams, including manufacturing, production, safety, and external vendors, to ensure designs are feasible, cost-effective, and manufacturable (DFM principles)
Implementation and Support: Oversee the procurement, fabrication, assembly, installation, and commissioning of new equipment and tooling, providing technical support and troubleshooting during prototype and production phases
Continuous Improvement: Identify process anomalies and performance shortfalls, recommending and implementing design modifications to eliminate malfunctions and improve efficiency

Fulltime

Fleet Field Technician

The Fleet Field Technician performs diagnostics, maintenance, and repairs on var...

Location

United States , Huntsville

Salary:

Not provided

Southeast Utilities of Georgia LLC

Expiration Date

Until further notice

Requirements

Submit to and successfully complete a background check, pre-employment drug test, MVR, and DOT physical
Proven history of heavy equipment experience
High school or equivalent education
Valid driver’s license
Ability to understand mechanical and construction terminology
Ability to operate welding equipment
Ability to operate diagnostic computers for equipment and trucks
Working knowledge and skill in body work, fabrication, welding and torching, computer diagnostics, hydraulic and construction equipment mechanics, automotive mechanics, electrical work, etc.
Ability to use basic math skills to compute measurements, liquid volumes, material strength, timecards, etc.
Ability to compute fuel to air ratios, gear ratios, etc.

Job Responsibility

Diagnose, maintain, and repair various construction equipment, on-highway vehicles, and trailers using basic and specialty test equipment either mechanical or electronic
Troubleshoots and replaces various components such as valves, hoses, fittings, tanks, pumps etc. in hydraulic systems
Troubleshoots and repairs complex wiring for systems such as the utility booms, chassis, and engine wiring
Navigate electronic service manuals, wiring diagrams, hydraulic schematics, and parts catalogs
Performs basic fabrication and welding using MIG, ARC, OXY Acetylene, Torch, grinders, and other fabricating tools
Performs preventative maintenance and BIT / DOT inspections including wet and dry PM services and repairs that need to be addressed during BIT inspection findings
Raises trucks, trailers or other equipment using hydraulic or air assisted jacks or hoists in a safe practice
Replaces worn or defective brake components including tire replacement
Diagnoses and repairs air conditioning systems
Fully follow dealership and manufacturer service guidelines

Fulltime

Geophysics Workshop Technician

For our Geophysical workshop, supporting equipment preparations and mobilisation...

Location

Netherlands , Nootdorp

Salary:

Not provided

Fugro

Expiration Date

Until further notice

Requirements

Vocational degree in Geophysical, Mechanical, Electrical Engineering, Mechatronics or relevant working experience
Experience in writing reports and implementing improvements in manuals
Attitude to examine existing processes continuously with the intent to improve them
Strive to deliver projects on time and to high quality
Positive attitude, optimistic, and enjoy working in a team
Good communication skills
Excellent command of English and preferably Dutch (spoken and written)

Job Responsibility

Ensure specialised equipment functions optimally
Responsible for necessary maintenance activities, repairs, new construction of geophysical equipment, and contribute to improvements and production processes
Keep track of maintenance reports, and carry out SAT testing of systems
Support the design departments where necessary
Assist in training and instructing colleagues who go offshore
Learn, improve, and develop new skills and follow training courses to further grow in your specialty

What we offer

A diverse and inclusive working environment
A competitive salary
29 holidays per year based on a fulltime employment (of which 4 are appointed by Fugro management) and the possibility to purchase 12 additional days
Extensive career & training opportunities both nationally and internationally
Flexible working hours and the ability to work from home in accordance with your manager and corporate policies
Commuting allowance
Modern pension scheme
Collective health insurance
Possibility to register with our corporate fitness plan
Coaching options through our EAP (Employee Assistance Program)

Fulltime

Engineering Internship

Under general direction of a Professional Engineer or other assigned responsible...

Location

Salary:

Not provided

Krech Ojard & Associates

Expiration Date

Until further notice

Requirements

Currently enrolled in a Civil, Electrical, Mechanical, or Structural engineering program with an accredited college or university
Currently enrolled as a sophomore or higher level with a GPA of 3.0 or higher
Basic understanding of CAD or 3D CAD software
Ability to effectively communicate and interact with staff and team members

Job Responsibility

Learning and application of design development capabilities to the project workflow by developing electronic documents in the form of drawings, technical detail documents, and summary reports
Collaboration with technicians and engineers to improve technical capabilities and understanding of the nuances of design software platforms utilized by most engineering firms
Perform design and engineering tasks associated with new projects and projects at various stages of execution
Work with senior staff, preparing detailed plans and specifications for engineering and design projects
Receive training and develop an understanding of the importance of safety awareness while on various types of jobsites
Work with staff members in developing an understanding of and the ability to apply the necessary level of detail for each stage of design development
Utilize specialty equipment required in the development of project deliverables (Laser scanners, GPS Survey equipment, and various nondestructive testing equipment frequently used by engineers and technicians)

Heavy Equipment Mechanic

The Heavy Equipment Mechanic is responsible for performing preventative maintena...

Location

United States , Columbus

Salary:

Not provided

Southeast Utilities of Georgia LLC

Expiration Date

Until further notice

Requirements

High school or equivalent diploma/GED and minimum 5 years’ experience in this specific role or in fields relating to medium/heavy duty truck repair, construction equipment repair, utility equipment repair or similar
Must be able to read, write and speak fluent English
Valid driver’s license with a clean driving record
Candidate must be able to work independently, have good critical thinking / problem solving skills, follow directions, and be self-motivating
Candidate must be a good representative of our company and perform their duties in an honest, ethical, and diligent manner
Available / willing to work overtime as needed
Knowledge and experience with diesel engines
Must have basic computer skills and be organized
Must furnish own tools and work boots
Ability to work in a fast-paced environment under pressure

Job Responsibility

Efficiently perform machinery maintenance and repairs in the field and or shop
Diagnoses and repairs various construction equipment and on-highway utility trucks and trailers using basic and specialty test equipment either mechanical or electronic
Troubleshoots and replaces various components such as valves, hoses, fittings, tanks, pumps etc. in hydraulic systems
Troubleshoots and repairs complex wiring for systems such as utility booms, chassis, and engine wiring
Performs basic fabrication and welding using MIG, ARC, OXY Acetylene, Torch, grinders, and other fabricating tools
Performs preventative maintenance and DOT/FMCSA inspections including wet and dry PM services and repairs that need to be addressed during inspection findings
Raises trucks, trailers or other equipment using hydraulic or air assisted jacks or hoists in a safe practice
Replaces worn or defective brake components including tire replacement
Diagnoses and repairs air conditioning systems
Completes and submits all paperwork in an accurate and timely fashion

What we offer

competitive compensation, health benefits, wellness resources, 401(k) retirement planning, and employee recognition and leadership development programs

Fulltime

Specialty Mechanical Equipment Engineer

Amentum

Location:
United States , Oak Ridge

Category:
-

Contract Type:
Not provided

Salary:

Job Description:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Specialty Mechanical Equipment Engineer

Engineer Reliability Fixed Equipment

Principal Mechanical Engineer

Fleet Field Technician

Mechanical Tooling/Equipment Design Engineer

Fleet Field Technician

Geophysics Workshop Technician

Engineering Internship

Heavy Equipment Mechanic

Specialty Mechanical Equipment Engineer

Amentum

Location:United States , Oak Ridge

Category:-

Contract Type:Not provided

Salary:

Job Description:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Specialty Mechanical Equipment Engineer

Engineer Reliability Fixed Equipment

Principal Mechanical Engineer

Fleet Field Technician

Mechanical Tooling/Equipment Design Engineer

Fleet Field Technician

Geophysics Workshop Technician

Engineering Internship

Heavy Equipment Mechanic

Location:
United States , Oak Ridge

Category:
-

Contract Type:
Not provided

Job Posted:
March 05, 2026