Specialty Mechanical Equipment Engineer Job at Amentum (Oak Ridge)

Specialty Mechanical Equipment Engineer

Amentum Nuclear Projects is a Tier 1 service provider to the U.S. Department of ...

Location

United States , Oak Ridge

Salary:

110000.00 - 160000.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

10 or more years of experience
B.S. Engineering from an ABET accredited engineering school
Knowledge and experience with specialized mechanical equipment
Experience with management of scope, schedule, and budget of individual projects
Ability to follow established Amentum’s quality procedures and ensures that all work accomplished under their control is accomplished under established quality procedures
Experience working within a quality system based on ISO 9000 or NQA-1
Knowledge of machine design, selection of machine elements (bearings, seals, etc.) and machine controls (hydraulic, electrical, etc.)
Competent using discipline-specific technical software such as: SOLIDWORKS, Creo, ANSYS, etc.
Competent using Microsoft Office software
US citizenship required

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Electrical Engineer, Journeyman

DCS has an exciting opportunity for an Electrical Engineer to support to the Air...

Location

United States , Ogden

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

Due to the sensitivity of customer related requirements, U.S. Citizenship is required
Must hold an active Secret clearance
Bachelor's Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
Electro-mechanical controls
Modeling and simulation
Test and evaluation
Technical data package development and sustainment
Principles of configuration management

Job Responsibility

Provide system engineering review and analysis of assigned systems throughout all acquisition phases, including conceptual, demonstration, validation, engineering, manufacturing development, production, deployment, and sustainment
Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
Develop and refine features to improve, extend, or validate current methods, data, or techniques
Review overall system design baseline (architecture and interoperability) requirements
Assist in the development of system specifications and architecture products
Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
Support life cycle cost evaluations of proposed systems and components
Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
Schedule and secure test resources to meet program office objectives
Monitor and report on test and evaluation (T&E) activities across all systems

Fulltime

Project Manager Midstream

HF Sinclair Midstream is seeking a Project Manager. This position is open to loc...

Location

United States , Dallas; Salt Lake City; Midland; Cheyenne; Casper; Tulsa; Artesia

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of ten years in petrochemical, midstream or refining industry and five years in a project management related role is required
A minimum of a Bachelor's degree in Engineering or related technical field is required
Technical expert in area of specialty
Advanced ability to stay abreast of new technology and industry developments and processes and apply knowledge analytically
Strong knowledge of Microsoft products and commonly used engineering and project management concepts and experience
Familiarity with standards and practices of the specific discipline
Design oversight ability in at least one of the following areas: Mechanical Design, Electrical Design, Instrumentation/Controls Design, Civil Design, Metallurgy
Ability to marshal, motivate and manage resources
Strong interpersonal skills
Ability to effectively communicate with others, both written and verbal communication, basic reading and writing skills, and ability to perform basic mathematical calculations

Job Responsibility

Defines projects, working with business managers and SMEs determining project business case, objectives, risks, and scope
Propose technical strategies and provide technical assistance to business unit(s)
Analyzes economics of each project where appropriate and calculates ROI for proposed projects
Prepare and present project charters and AFE estimates for funding and approval to proceed
Build, manage and motivate cross-functional project teams composed of internal and external resources through the lifespan of each project
Assign tasks and require accountability, ensure compliance with all regulatory, environmental, safety and facility requirements
Ensure proper representation from key departments including but not limited to: Engineering, Asset Manager and Coordinators, Operators, Scheduling, Environmental, Regulatory, Safety and IMP
Provide oversight and coordination for designs and builds of pipeline, facility, and plant additions and modifications, support engineering design utilizing internal and 3rd party resources, manages outside engineering productivity and cost, manages version control, distribution, reviews and signoff of drawing and design packages
Prepare and manage, with the support of the Procurement department and SMEs, RFPs and bid packages, bid events, work orders, requisitions, and purchase orders for materials and services
Participate in vendor selection and manage bid evaluations

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Mechanical & Plumbing Construction Project Manager

Seeking a project manager that is experienced in leading commercial mechanical &...

Location

United States

Salary:

105000.00 - 180000.00 USD / Year

Blueprint Staffing

Expiration Date

Until further notice

Requirements

5+ years of experience in mechanical and plumbing construction project management
Proven track record of managing mechanical & plumbing projects from buyout to closeout with complete ownership
Field or trade background preferred in plumbing, pipefitting, HVAC mechanics, or hands-on mechanical & plumbing installation experience
Extensive knowledge of MEP systems, including HVAC, hydronic systems, plumbing, medical gas, and related equipment
Proficient in Procore, Bluebeam, and Microsoft Office Suite (Excel, Word, Outlook, Teams)
familiarity with BIM coordination tools (Navisworks, Revit, or similar)
Degree in Construction Management or Engineering preferred
equivalent experience will be considered

Job Responsibility

Lead project buyout processes through to project closeout with full financial and operational accountability
Own project financial performance, including budgets, forecasts, cost-to-complete, change orders, and cash flow management
Manage project documentation including submittals, RFIs, with a focus on technical ownership
Oversee equipment procurement, manage delivery schedules, and ensure specialty subcontractor performance
Drive BIM coordination and prefabrication planning to enhance field installation efficiency and effectiveness

What we offer

Vehicle allowance & fuel card provided
100% Medical coverage for employee
Dental & vision insurance available
Available FSA
401(k) and annual performance bonus
PTO & Holidays
On-site fitness facility + personal training & nutrition coaching available

Fulltime

Qa/qc Inspector- Mechanical/piping

Airswift is currently looking for a QA/QC Inspector - Mechanical / Piping to be ...

Location

United States , Prudhoe Bay

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 10 years of mechanical and piping construction inspection experience
Minimum 5 years on major industrial, oil and gas, refinery, or petrochemical projects
Associate degree, technical diploma, or equivalent training in Mechanical Technology, Quality Assurance, Construction Technology, or related discipline preferred
High school diploma or equivalent required
Working knowledge of mechanical equipment installation practices
Working knowledge of piping fabrication and installation
Working knowledge of welding inspection techniques
Working knowledge of pressure testing requirements
Working knowledge of material traceability programs
Working knowledge of mechanical completion and turnover processes

Job Responsibility

Conduct daily field inspections of mechanical and piping construction activities
Verify installation complies with approved Issued-for-Construction (IFC) drawings, specifications, and project requirements
Monitor contractor workmanship and adherence to approved procedures
Verify proper installation of process piping systems, utility piping systems, pumps and compressors, pressure vessels, heat exchangers, packaged equipment, valves and specialty items, pipe supports and hangers, HVAC mechanical systems, fuel, water, and utility systems
Verify welders possess current qualifications for assigned work
Confirm welding activities are performed in accordance with approved procedures
Monitor fit-up, welding, preheat, inter-pass temperature, post-weld activities, and bolted connections
Verify weld identification and traceability requirements
Review fabrication records and field welding documentation
Inspect incoming mechanical and piping materials

What we offer

Lodging accommodations and meals provided

Fulltime

Senior Mechanical Designer

As a Senior Mechanical Designer at Power Design, you'll lead the design, coordin...

Location

United States , St. Petersburg

Salary:

Not provided

Power Design

Expiration Date

Until further notice

Requirements

7+ years of mechanical design experience supporting commercial, multifamily, hospitality, healthcare, data center, or mixed-use projects
Advanced knowledge of HVAC and mechanical design principles, system sizing, equipment selection, and applicable building codes
Proficiency in Revit, and Bluebeam
Experience designing systems including DX, VRF/VRV, chilled water, hydronic, packaged rooftop units, and other commercial HVAC applications
Strong understanding of constructability, coordination, and installation methods within a design-build environment
Strong analytical, problem-solving, organizational, and communication skills with the ability to lead projects and mentor team members
Demonstrated ability to manage multiple priorities while delivering high-quality design solutions
Commitment to Power Design's core values of integrity, accountability, teamwork, innovation, and growth

Job Responsibility

Lead and oversee the design and documentation of HVAC and mechanical systems, including air distribution, hydronic, ventilation, exhaust, and specialty mechanical systems
Provide direction and mentorship to junior designers and engineers to ensure the accuracy, efficiency, and quality of design deliverables
Ensure compliance with applicable codes, standards, and jurisdictional requirements, including IMC, IBC, ASHRAE, and other relevant mechanical design standards
Coordinate with architects, structural engineers, plumbing, electrical, and other design disciplines to ensure system integration and design consistency
Prepare and review drawings, specifications, calculations, and design documentation using Revit, AutoCAD, and other discipline-specific software
Conduct technical reviews and quality control checks throughout the design and preconstruction phases
Perform and review HVAC load calculations, equipment selections, duct and piping sizing, and system performance evaluations
Support project estimating efforts by providing accurate system information and constructability recommendations
Manage multiple projects simultaneously while maintaining schedules, budgets, and client expectations
Drive innovation, value engineering, and continuous improvement across mechanical design workflows

Fulltime

Program Integrator

Astrion has an exciting opportunity for a Program Integrator for the RTC Test an...

Location

United States , Huntsville

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

Must possess a Bachelor's Degree in a technical, science or business discipline from an accredited college/university and 3 years of experience in one of the following areas: Communication, Logistics, Operations, Finance, Personnel/Human Resource Management, Program Management, Process Improvement, Safety, Security, and Environmental specialties
or an Associate's Degree and 5 years of applicable experience in the assigned specialty area
or 7 years of experience performing the job duties in the assigned specialty area
or 7 years of military training in the assigned specialty area, or a combination thereof
Program Analyst - 2 years of the required experience must include experience coordinating projects
collecting data, reviewing technical documents compiling statistics and data for projects
writing narratives, managing the execution of inspection programs, creating, monitoring, and maintaining audit files for program compliance
Must be able to obtain and maintain a Secret Government security clearance (Must be a U.S. Citizen)
Must be able to pass pre-employment drug screening
Must have a valid driver's license

Job Responsibility

FTS Program Integrators ensure the availability of all equipment and materials necessary to assemble, test, qualify, maintain and field RTC's TM/FTS kits, and to support integration and flight test missions
Integrators are required to become highly technically competent in the systems and processes necessary for the RTC's TM/FTS mission
Manage existing inventory of material, hardware and support equipment
Use mechanical and electrical drawings, and bills of materials to request vendor quotes
Create purchase requests - micro, macro, and sole source
Follow up with vendors to maintain delivery schedule
Maintain a close relationship with Engineers, Technicians and Project Managers to anticipate upcoming needs
Develop technical competence with TM/FTS equipment, systems, documentation and processes
Assist with mission preparation and shipping
Assist post mission with return shipping and accountability of equipment

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

Facilities Engineer

HF Sinclair in Sinclair, WY is seeking a Facilities Engineer who would provide t...

Location

United States , Sinclair

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of a Bachelors Degree in Engineering is required
Ability to generate hand drawn field sketches, Piping and Instrumentation Diagrams (PIDs), piping isometrics and a general knowledge of AutoCAD or equivalent is desirable
Proficiency in Microsoft Office is required
Knowledge of the fundamentals of project management front-end engineering and project planning and scheduling desired
Excellent organization skills and the ability to communicate effectively (both verbal and written) is required
Experience in oil and gas production, refineries, petrochemicals, or related industry as a Mechanical Engineer is desirable

Job Responsibility

Provide technical engineering support to assigned operations unit as required with the objective of improving safety, compliance, reliability, and expense performance
Ensure the successful execution of run and maintain projects in their assigned unit
Support turnaround execution with timely and accurate engineering of repair plans for planned and discovery work
Act as an interface between operations, maintenance, reliability and inspection groups as part of the area team
Participate in task forces, incident investigations and drive the disciplined adherence to HF Sinclair’s management of change process
Design of piping system repairs, including identifying specification, metallurgy, layout, and supports for run and maintain projects in their assigned area
Understand/use equipment standards and ASME, API, and related industry codes
Work with the inspections department to generate and resolve Equipment Deficiency Reports (EDRs)
Generate and see to completion Management Of Change (MOCs) for their assigned unit
Maintain current and accurate process safety information for MOCs on their unit

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Select Country

Specialty Mechanical Equipment Engineer

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?

Specialty Mechanical Equipment Engineer

Specialty Mechanical Equipment Engineer

Electrical Engineer, Journeyman

Project Manager Midstream

Mechanical & Plumbing Construction Project Manager

Qa/qc Inspector- Mechanical/piping

Senior Mechanical Designer

Program Integrator

Facilities Engineer

Our AI answers in your language