Spacecraft Harness Engineer Job at Boeing (El Segundo)

Satellite Production Technician, Integration

As a Satellite Production Technician, Integration at ICEYE, your mission is to t...

Location

Finland , Espoo

Salary:

Not provided

ICEYE

Expiration Date

Until further notice

Requirements

Ability to apply basic technical knowledge gained through a high school diploma or equivalent technical education
Proven competence in electro-mechanical or mechanical assembly/integration in a hands-on environment (typically 2+ years)
Strong manual dexterity and consistent attention to detail when working with small or precision components
Practical understanding of how mechanical and/or electrical systems work and interact
Ability to communicate clearly in English, both in writing and speaking, in a technical work environment

Job Responsibility

Satellites are built to spec by correctly assembling mechanical subassemblies into fully integrated spacecraft
All wire harnesses are installed and integrated so that electrical systems function reliably in orbit
Mechanical and electrical ground support equipment is used safely and effectively to support smooth integration and testing
Work instructions and engineering drawings are followed precisely, resulting in first-time-right assemblies
All work is fully documented in the shop floor system, ensuring end-to-end traceability of every satellite
Satellite hardware is protected from damage and contamination through consistently careful handling in cleanroom and ESD-safe areas

What we offer

Occupational healthcare and accident insurance
A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
Phone subscription with iPhone of your choice
Relocation support if needed (i.e. flight tickets, accommodation, relocation agency support)
Time for self-development, research, training, conferences, or certification schemes
Inspiring and collaborating offices and silent workspaces enable you to focus
A wide variety of the best coffee, tea, snacks, and sweets to accompany your daily space mission

Fulltime

Electrical Project Engineer Senior - Development

Seeking a highly experienced Electrical Project Engineer to execute projects in ...

Location

United States , Westminster, Colorado

Salary:

149603.00 - 254317.00 USD / Year

Baesystems

Expiration Date

Until further notice

Requirements

BS degree or higher in Engineering or a related technical field is required plus 10 or more years of related experience
Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience
Related technical experience may be considered in lieu of education
Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education
Experience with executing electronics programs (could be PCB design, box testing, PWA assembly, or other)
Hands-on experience with “flight space qualified” analog, digital, and/or mixed signal electronics design, fabrication, and test in radiation intense environments
Experience with Electronics/Electrical Engineering (EEE) parts for space flight applications and understanding of associated screening and qualification processes
Successful track record (cost, schedule, performance) leading and providing technical guidance to cross-functional space-based electronics teams from proposal through delivery
Experience leading Earned Value Management Systems (EVMS) programs and reporting cost variance metrics
Solid working knowledge of project management tools and practices, including developing and controlling program schedules and budgets, risk & opportunity management, scope change management, resource management, and subcontract program management preferably for US government customers

Job Responsibility

Multi-task and oversee multiple small, fast-paced development programs including IRADs, CRADs, CAPEX, and other programs with lean budgets ranging from ~$100k up to ~$75M and aggressive schedules
Interface with payload or spacecraft IPT leads, system engineers, and program management to provide alternatives to requirements that drive system cost and schedule
Work with support disciplines –system assurance, quality assurance, test engineering, and production
Provide and communicate insight and understanding of both the technical and programmatic aspects of project to the customer community and project team
Lead generation of Statement of Works (SOWs) and vendor management
Create and enable new cost and schedule effective execution approaches for development that are focused on best value to our company, programs, and customers
Understand long-term objectives for BAE Systems SMS and our customers and how to help shape development work to enable future opportunities
Understand onboarding path for products and documentation produced on development programs and how to best benefit future programs
Determine most efficient means of producing prototypes, brassboards, EDUs, and STE. Support engineers in execution and documentation
Hands-on involvement in expediting every aspect of design, development, production, and test

What we offer

health, dental, and vision insurance
health savings accounts
a 401(k) savings plan
disability coverage
life and accident insurance
employee assistance program
legal plan
discounts on things like home, auto, and pet insurance
paid time off
paid holidays

Fulltime

Propulsion Technician Senior

The Propulsion Technician’s main responsibility is to execute orbital‑tube weldi...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Perform Orbital tube welding for the fabrication of tube subassemblies and final propulsion tank closeouts
Assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Propulsion Technician Senior

The Propulsion Technician’s main responsibility is to execute orbital‑tube weldi...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Perform Orbital tube welding for the fabrication of tube subassemblies and final propulsion tank closeouts
Assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

Propulsion Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

May 29, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Weld, assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Mechanical Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in mechanical or propulsion assembly on high reliability products (preferably aerospace products)
High School Diploma/GED
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrated exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with assembly tooling and/or composites fabrication and assembly
Experience with using various hand and power tools
Experience mixing epoxy materials
Excellent communication and teamwork skills

Job Responsibility

Assemble, install, test, checkout and inspect mechanical spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Perform second party verifications and visually inspect mechanical assemblies to drawings, engineering specifications, and written assembly, integration, and test procedures
Operate various materials handling equipment including forklifts, overhead cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel required to support operations identified by program being supported
Capable of operating a wide range of machine tools. Included but not limited to, drill press, grinders, chop saw, power, and hand tools
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in other mechanical areas defined by Millennium Space Systems Leadership as business needs require
Cross-train/mentor new hires

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Mechanical Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in mechanical or propulsion assembly on high reliability products (preferably aerospace products)
High School Diploma/GED
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrated exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with assembly tooling and/or composites fabrication and assembly
Experience with using various hand and power tools
Experience mixing epoxy materials
Excellent communication and teamwork skills

Job Responsibility

Assemble, install, test, checkout and inspect mechanical spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Perform second party verifications and visually inspect mechanical assemblies to drawings, engineering specifications, and written assembly, integration, and test procedures
Operate various materials handling equipment including forklifts, overhead cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel required to support operations identified by program being supported
Capable of operating a wide range of machine tools. Included but not limited to, drill press, grinders, chop saw, power, and hand tools
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in other mechanical areas defined by Millennium Space Systems Leadership as business needs require
Cross-train/mentor new hires

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Mechanical Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in mechanical or propulsion assembly on high reliability products (preferably aerospace products)
High School Diploma/GED
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrated exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with assembly tooling and/or composites fabrication and assembly
Experience with using various hand and power tools
Experience mixing epoxy materials
Excellent communication and teamwork skills

Job Responsibility

Assemble, install, test, checkout and inspect mechanical spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Perform second party verifications and visually inspect mechanical assemblies to drawings, engineering specifications, and written assembly, integration, and test procedures
Operate various materials handling equipment including forklifts, overhead cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel required to support operations identified by program being supported
Capable of operating a wide range of machine tools. Included but not limited to, drill press, grinders, chop saw, power, and hand tools
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in other mechanical areas defined by Millennium Space Systems Leadership as business needs require
Cross-train/mentor new hires

What we offer

Competitive base pay and variable compensation opportunities
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits

Fulltime

Spacecraft Harness Engineer

Boeing

Location:
United States , El Segundo

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Requirements:

Additional Information:

Job Posted:
January 06, 2026

Expiration:
March 31, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Spacecraft Harness Engineer

Satellite Production Technician, Integration

Electrical Project Engineer Senior - Development

Propulsion Technician Senior

Propulsion Technician Senior

Propulsion Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Spacecraft Harness Engineer

Boeing

Location:United States , El Segundo

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Requirements:

Additional Information:

Job Posted:January 06, 2026

Expiration:March 31, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Spacecraft Harness Engineer

Satellite Production Technician, Integration

Electrical Project Engineer Senior - Development

Propulsion Technician Senior

Propulsion Technician Senior

Propulsion Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Location:
United States , El Segundo

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
January 06, 2026

Expiration:
March 31, 2026