Soldering Operator Job at Synapse - Manufacturing (Greenville)

Engineer II

Location

United States , Georgetown

Salary:

Not provided

Marriott Bonvoy

Expiration Date

Until further notice

Requirements

High school diploma or G.E.D. equivalent and vocational or technical background
Experience in general maintenance, exterior and interior surface preparation, and painting
At least 2 years of hotel engineering/maintenance experience
Valid Driver's License
Universal Chlorofluorocarbon (CFC) Certification
Must meet applicable state and federal certification and/or licensing requirements

Job Responsibility

Respond and attend to guest repair requests
Communicate with guests/customers to resolve maintenance issues with little to no supervision
Perform preventive maintenance on tools and equipment, including cleaning and lubrication
Visually inspect tools, equipment, or machines
Carry equipment (e.g., tools, radio)
Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings
Maintain maintenance inventory and requisition parts and supplies as needed
Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards
Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management
Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks

Fulltime

New

Operator II 3rd Shift

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

United States , Skaneateles Falls

Salary:

21.00 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

High school diploma or equivalency
1 year minimum successful experience in assembly/related functional area
Good mechanical dexterity/eyesight
Ability to read, write and use basic math
Maintain a high degree of accuracy in performing repetitive tasks
Adapt to changing work environment
Ability to work well with others
Participate in team problem-solving activities
Ability to work overtime as needed
Must be able to lift 40lbs

Job Responsibility

Read, understand, and follow assembly processes
Assist in setup of test equipment, leak tester and/or tensile tester
Leak test cuffs and run other tests as required
Perform routine assembly operations including soldering, using RTVS, epoxies, folding, labeling and boxing product
Use measurement equipment or learn
Keep records
Basic problem-solving skills
Train and work with diverse group of people
Maintain positive attitude
Consistently meet all productivity and quality requirements

What we offer

Medical and dental coverage starting on day one
Basic life insurance
Accident insurance
Short-term and long-term disability insurance
Business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan (RSP) with employee contributions and company matching
Flexible Spending Accounts
Educational assistance programs
Paid holidays

Fulltime

New

Research Electro-mechanical Technician C

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Everett

Salary:

27.32 - 57.88 USD / Hour

Boeing

Expiration Date

August 14, 2026

Requirements

Experience with mechanical and electrical workflow
Experience reading and interpreting engineer drawings and technical data
Experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harnesses
or any variety of electrical components, and associated equipment
1+ year of experience working with hazardous materials

Job Responsibility

Fabricate, assemble, and test components of prototype aircraft instrumentation and ordnance equipment
Set up and operate required flight test equipment (e.g., wire bundles, sensors, strain gages) to perform functional or environmental tests on production and/or experimental
Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work order
Fabricate wire bundles used to connect various types of flight test computer equipment together, for the purpose of collecting and storing data during test flights
Perform tests such as vibration, thermal, humidity, or altitude using various computer systems, oscilloscopes, power supplies, and meters of various types under direction of lead and/or engineering. Install thermocouples, accelerometers, and strain gauges by soldering, bonding, or using mechanical fastening devices
Perform modification and repair of test equipment to meet engineering configuration, as required
Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander
Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Material Safety Data Sheets) using personal protective equipment as required

What we offer

health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly
fertility, adoption, and surrogacy benefits
up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

New

Research Electro-Mechanical Technician C

The Boeing Company is looking for a Research Electro-Mechanical Technician C to ...

Location

United States , Seattle

Salary:

27.32 - 57.88 USD / Hour

Boeing

Expiration Date

August 14, 2026

Requirements

Experience with mechanical and electrical workflow
Experience reading and interpreting engineer drawings and technical data
Experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harnesses
or any variety of electrical components, and associated equipment
1+ year of experience working with hazardous materials

Job Responsibility

Fabricate, assemble, and test components of prototype aircraft instrumentation and ordnance equipment
Set up and operate required flight test equipment (e.g., wire bundles, sensors, strain gages) to perform functional or environmental tests on production and/or experimental
Obtain appropriate engineering drawings and test documents, as required, for assignment if drawings, sketches, and documents are not with work order
Fabricate wire bundles used to connect various types of flight test computer equipment together, for the purpose of collecting and storing data during test flights
Perform tests such as vibration, thermal, humidity, or altitude using various computer systems, oscilloscopes, power supplies, and meters of various types under direction of lead and/or engineering. Install thermocouples, accelerometers, and strain gauges by soldering, bonding, or using mechanical fastening devices
Perform modification and repair of test equipment to meet engineering configuration, as required
Select proper hand, power, and/or bench tools needed to perform required operation, such as screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press, and sander
Handle and dispose of hazardous materials (ketone, naphtha, alcohol, epoxy, acids) in approved manner (in accordance with Material Safety Data Sheets) using personal protective equipment as required

What we offer

health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly
fertility, adoption, and surrogacy benefits
up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

New

Electrical Technician III

We are seeking a skilled and motivated EE Technician to join a hardware team foc...

Location

United States , Redmond

Salary:

29.00 - 39.00 USD / Hour

Apex Systems

Expiration Date

Until further notice

Requirements

AS/AA or BS degree in Electrical Engineering, Electronics Technology, or equivalent practical experience
3+ years of experience with electronic assembly and soldering, including (01005) and 0.35mm-pitch BGA components
Ability to operate standard lab test and measurement equipment such as oscilloscopes, DMMs, power supplies, signal generators, and LCR meters
Proficiency in reading and interpreting electrical datasheets, schematics, PCB layout drawings, and mechanical assembly drawings

Job Responsibility

Build, assemble, rework, and modify prototype PCBs and electronic assemblies, including fine-pitch SMD (01005) and 0.35mm-pitch BGA components
Test and repair units by running functional tests, performing visual inspections, and executing component or module exchanges to isolate failures
Document all work performed on each unit in a thorough and consistent manner
Create and maintain test fixtures, wiring harnesses, and cable assemblies for prototype evaluation
Maintain lab equipment, manage component inventory, and ensure lab safety standards are upheld
Adapt to a changing statement of work, prioritizing and balancing multiple tasks
Collaborate with design engineers for troubleshooting, clarification, and feedback
Propose and implement process improvements to increase production efficiency

What we offer

Medical
dental
vision
life
disability
other insurance plans
ESPP (employee stock purchase program)
401K program with company match after 12 months
HSA (Health Savings Account on the HDHP plan)
SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions

New

Senior Maintenance Technician

The Senior Maintenance Technician reports to the Facility Maintenance Supervisor...

Location

USA , St. Paul

Salary:

43.00 USD / Hour

H.B. Fuller

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
Associate degree in a maintenance-related field, technical certification, or equivalent trade training preferred
Minimum 8 years of hands-on industrial, commercial, or facility maintenance experience
Previous experience supporting corporate headquarters, laboratory, or research facilities preferred
Minnesota State Chief Class C Boiler License or ability to obtain within six months of hire
Demonstrated experience with Variable Frequency Drives (VFDs) and Motor Control Centers (MCCs)
Strong mechanical aptitude and experience repairing Pumps
Motors
HVAC equipment
Laboratory equipment

Job Responsibility

Perform advanced preventive maintenance, troubleshooting, repairs, and upgrades on building systems and process equipment, including HVAC systems
Laboratory fume hoods
Heat recovery systems
Boilers, chillers, and cooling towers
Emergency generators
Electrical distribution systems
Plumbing and piping systems
Building automation and process control systems
Manage and maintain campus HVAC and security systems to ensure optimal performance and reliability
Independently diagnose and resolve complex maintenance issues using technical expertise, diagnostic tools, and available system data

What we offer

comprehensive benefits
incentive and recognitions programs
health & wellness benefits
401K contributions
paid time off
paid holidays

Fulltime

New

HVAC Mechanic

Amentum, a global leader in critical mission support, engineering, technology, a...

Location

United States , Jacksonville

Salary:

36.71 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school graduate or equivalent
Must have at least one of the following: Graduate of an accredited technical school's diploma program in HVAC/R or three (3) years verifiable commercial work experience as a journey level HVAC/R mechanic or county, state, or city HVAC/R license
Must possess a valid state driver's license
Must possess CFC Refrigerant Universal Class A
Strong computer skills required for troubleshooting and correcting digital control software
Must be knowledgeable in the use of specialized tools used to perform necessary corrective and preventive maintenance and repairs
Must possess the standard tools of the trade
Must have and wear hard-toed safety shoes which meet ASTM F2413-05 standards
Successful candidate will be subject to a government security investigation and must continually meet eligibility requirements for access to all areas of Naval Submarine Base Kings Bay
Must be able to obtain and maintain facility credentials/authorization

Job Responsibility

Installs, services, and repairs environmental-control systems in residences, office buildings and other commercial/industrial settings, utilizing knowledge of refrigeration theory, pipefitting, and structural layout
Mounts compressor, condenser units and chiller units on platform or floor, using rigging, power and hand tools, following blueprints, or engineering specifications
Fabricates, assembles, and installs ductwork and chassis parts, using portable metalworking tools
Installs evaporator units in chassis or in air duct systems, using hand and power tools
Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools
Cuts and threads pipe, using machine-threading or hand-threading equipment
Joins tubing or pipes to various refrigerating units by means of sleeves, couplings, or unions, solder and brazed joints, using torch
Installs expansion and discharge valves in circuit
Electrically connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source
Installs air and water filters in completed installation

What we offer

Health & Welfare: $15.42 per hour contributed to benefits
401(k): Company matches up to 6% of employee contributions
Paid Time Off: Starts at 2.62 hours per pay period (136 hours annually), with increases based on tenure
Holidays: 12 paid holidays
Additional Leave: Includes bereavement and leave share programs
Shift Differential: Extra $1.75–$2.00/hour depending on shift start time
Hazard Pay: $3.00/hour for designated high-risk work areas
Lead Pay: Additional $2.25/hour for lead roles (temporary or permanent)
On-Call Pay: Two hours of overtime pay per day when on call during off-days/holidays
Safety Shoes: $175 annual allowance

Fulltime

New

Flight Operations Mechanic

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Saint Charles

Salary:

28.00 - 52.11 USD / Hour

Boeing

Expiration Date

June 19, 2026

Requirements

1+ years of experience with electrical assembly
3+ years of experience with weapons and missile systems
3+ years of experience with reading and understanding engineering drawings, blueprints, schematics, and specifications

Job Responsibility

Perform operational checkout of aircraft prior to and during preflight
Inspect explosive and armament installations
Maintain aircraft historical records
Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft
Inspect and/or perform bench and flight line operational checkout and inspect, troubleshooting, adjustment and repair of electrical and electronic systems
Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed
Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system
Fabricate, adjust, trouble shoot, repair and modify electronic test equipment
Perform operational checkout of hydraulic systems and mechanical systems
Diagnose and correct hydraulic and mechanical malfunctions

What we offer

competitive base pay and variable compensation opportunities
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits

Fulltime

!

Select Country

Soldering Operator

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?