Slitter operator Job at Printpack (Villa Rica)

Slitter Operator

Location: Detroit, MI Koil Metals is a Detroit-based steel service center that ...

Location

United States , Detroit

Salary:

Not provided

Cleveland-Cliffs

Expiration Date

Until further notice

Requirements

Verify production run information for accuracy, provide slitting team with set up and process instructions, and ensure coils are supplied for the production run performing required verification checks
build slitter head to ensure best possible options within the machine's capabilities
process coils ensuring quality tolerances are adhered to
complete all associated documentation and reports (Slitting Production Report, Slitting Report)
monitor and inspect equipment for safe operation and advise management of any maintenance concerns
must have good housekeeping and the ability to maintain a clean and safe work environment
responsible for the safety of team members, never operating the machine when someone is in an unsafe position
other duties as assigned

Job Responsibility

Producing quality products in a safe, productive, and profitable manner
function as the machine operating leader, guiding the slitting crew throughout the process

Fulltime

Slitter Operator

Koil Metals is a Detroit-based steel service center that processes and distribut...

Location

United States , Detroit

Salary:

Not provided

Cleveland-Cliffs

Expiration Date

Until further notice

Requirements

High School diploma or equivalent job experience
Advanced knowledge and skill level of slitting machine
Must be able to read Standard/Metric measuring tape

Job Responsibility

Verify production run information for accuracy, provide slitting team with set up and process instructions, and ensure coils are supplied for the production run performing required verification checks
Build slitter head to ensure best possible options within the machine's capabilities
Process coils ensuring quality tolerances are adhered to
Complete all associated documentation and reports (Slitting Production Report, Slitting Report)
Monitor and inspect equipment for safe operation and advise management of any maintenance concerns
Must have good housekeeping and the ability to maintain a clean and safe work environment
Responsible for the safety of team members, never operating the machine when someone is in an unsafe position

Fulltime

Slitter Operator

Slitter Operator - Weekend Warrior - Night Shift. 7pm - 7am. Printpack is one of...

Location

United States , Marshall

Salary:

Not provided

Printpack

Expiration Date

Until further notice

Requirements

Follow all Printpack Safety policies
Operate every job with a Quality mindset
Operate lifting equipment, hoist, tilt-lock on rolls 20 to 300lbs
Responsible for neat and accurate production reports and job jackets to maintain traceability
Maintain a clean and safe working area
Complete housekeeping, hoist grounding & bonding inspections
Ability to read and determine proper wind configurations per the rewind chart
Operate the slitter at or above expected production targets
Accurately enter shift and job data into Prism
Help identify and report all Safety issues in area -including potential risks

Job Responsibility

Safely and efficiently operator the Slitter in accordance with Printpack Safety and Quality standards

What we offer

medical coverage
dental coverage
life insurance
short-term and long-term disability
401(k)
matching gift program
employee assistance programs
educational assistance
service awards

Fulltime

Laser Slitter Operator

The Laser Slitter Operator is responsible for the efficient and safe operation o...

Location

United States , Prescott Valley

Salary:

Not provided

Printpack

Expiration Date

Until further notice

Requirements

High School diploma or equivalent preferred
Previous manufacturing experience preferred
Problem-solving and troubleshooting capabilities
Ability to read and use measuring tools accurately
Strong attention to detail
Basic computer proficiency including email
Ability to read and write detailed reports
Strong organizational skills
Effective communication skills
Ability to train new operators

Job Responsibility

Operate and maintain slitting equipment according to established procedures and safety guidelines, ensuring optimal performance and quality output
Executes proper setup procedures for master rolls, including positioning, alignment, and preparation for slitting operations to meet production specifications
Ability to follow the Set-up Card / Recipe to precise specifications including Mfg. Instructions per job and Finishing specs
Performs splice operations during production runs, maintaining consistent material flow and minimizing downtime
Implements comprehensive material management protocols, including accurate identification, segregation, and labeling of work-in-process materials, rewinds, waste materials, and products placed on hold status
Coordinates with team members in the safe and efficient removal of processed rolls from rewind positions as production requirements dictate
Conducts precise measurement and documentation of startup rolls and materials at the initiation of each job, ensuring all SOC’s are followed and accurate production records
Trains new and lower-level slitter operators
Executes waste management protocols and accurate documentation
Manages equipment and tools through proper storage procedures and organizational systems

What we offer

medical coverage
dental coverage
life insurance
short-term and long-term disability
401(k)
matching gift program
employee assistance programs
educational assistance
service awards

Fulltime

Machine Operator: Jumbo Slitter - VSL4 - 2nd shift

Responsibility for the jumbo slitting and operation of machine, quality, BPS/5S.

Location

United States , Lincolnton

Salary:

Not provided

Robert Bosch Sp. z o.o.

Expiration Date

Until further notice

Requirements

Possesses basic mechanical skills
Basic mathematical skills (measurements, standard, metric)
Legible hand writing
Operate lift equipment
Unloading and reloading pallets
Printing labels
Reading and following standard operating procedures
Maintaining knowledge of high risk items and how to handle them
Maintaining knowledge of all safety requirements and procedures and adhere to all Safety Absolutes
Understanding milk run pick-up points

Job Responsibility

Overall jumbo slitting / machine operator
Accuracy for jumbos / slit rolls consumption
Optimization of equipment and the use of
Following BPS/5S/HSE rules
To make suggestions and recommendations about improvements
Complete set up and operation of Jumbo Slitter
Accurate consumption of materials BPS/5S/HSE standards to follow
Multi tasking (pre and post processing)
Perform other essential and related duties as may be required

Fulltime

Machine Operator 2

Tends to duties for bag making including but not limited to staging packing cont...

Location

Salary:

Not provided

SIG Group

Expiration Date

Until further notice

Requirements

High school diploma or G.E.D required or 3-5 years manufacturing experience
Ability to work all shifts and perform overtime
Previous experience as a quality control inspector preferred
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and Power Point presentations
Ability to write routine reports and correspondence
Ability to speak effectively before groups of customers or employees of the organization
Ability to add, subtract, multiply and divide in all units or measures, using whole numbers, common fractions, and decimals
Ability to compute rate, ratio, and percent and interpret bar graphs
Ability to calculate mean, median, and mode, and apply SPC to the quality processes
Ability to carry out instructions furnished in written, oral, or diagram form

Job Responsibility

Utility scrap & recyclables
Banding cores
Partial bins
Counting empty bins
Cutting down bad material
Identify all warehouse locations physically & virtually
Moving perf bed
Rotating/Changing slitter blade
Replacing strip/spout teflon & pads
Autopack resetting

Slitting Operator

Slitting Operator Level 2 responsible for setting up, operating, and optimizing ...

Location

United States , Northlake

Salary:

20.50 - 24.00 USD / Hour

SIG Group

Expiration Date

Until further notice

Requirements

2 -4 years of hands-on experience in Lamination and Slitting or a related manufacturing environment
Fill out production paperwork as required
Inspect materials to make sure they meet quality standards
Thread film through the machine and check if it matches the required size and type
Troubleshoot basic issues with the Slitter, like air pockets, folds, or wrinkles
Adjust machine temperature, pressure, and speed as needed during the lamination process
Cut off waste materials, trim, and roll laminated materials to meet machine and quality standards
Observe operation of the Slitting process for surface and quality defects

Job Responsibility

Check machine settings and safety features before starting the machines, load materials, and start operations
Learn and follow Lockout/Tagout (LOTO) procedures for Slitting equipment
Understanding different types of materials used in the Slitting process (e.g., plastic films, paper, foil, textiles) and how they behave during lamination
Operating machines that cut laminated materials into narrower strips or sizes according to customer specifications
Ability to operate laminating equipment that applies Adhesive or Thermal to materials and bonds them together under heat and pressure
Understanding different slitting methods, including rotary slitting, razor slitting, or shear slitting, and selecting the appropriate method for the material being processed
Ability to perform minor repairs or adjustments on machines, such as replacing blades, fixing jams, or realigning machinery
Ensure that the lamination and slitting processes are operating at the correct speed and efficiency
Regularly inspecting slit materials for defects like wrinkles, gaps, or uneven thickness
Start up and shut down of the assembly line and production equipment

What we offer

Generous Day 1 eligibility healthcare & life insurance for you and qualified dependents
401K Retirement matching reimbursement
Vacation & PSL
Paid Holidays
Performance Bonus

Fulltime

Mechanical Maintenance Technician

Proven to Perform. From the edges of space to the bottoms of ocean, our material...

Location

United States , Washington

Salary:

Not provided

ATI

Expiration Date

Until further notice

Requirements

High School Diploma or GED
At least two years of mechanical maintenance experience in a manufacturing, farming, military or other industrial environment
OR Associates Degree in Mechanical Engineering Technology, Engineering Technology or other mechanical program
Excellent troubleshooting and problem-solving capability
Effective communication skill with the ability to work collaboratively and effectively with cross-functional teams
Strong organization skills with the ability to prioritize and multi-task
Strong ability to work independently without direction, and as part of a team

Job Responsibility

Installing, maintaining, troubleshooting and repairing a broad range of mechanical equipment including rolling mills, annealing furnaces, slitters, conveyors, and mechanical components such as hydraulics, pneumatics, pumps, motors, power transmission systems
Performing some maintenance on cranes, forklifts and other mobile equipment
Follow all safety practices and rules to ensure equipment is operating in a safe manner
Perform preventative, predictive and emergency electrical maintenance on a variety of electrical and electronic systems
Performance other maintenance work such as installing piping, welding, rigging, carpentry work and performing miscellaneous repairs on to floors, ceilings, window/glass, doors, etc.
Implement process improvements and methods that will increase effectiveness and efficiencies
Use of standard and specialized tools and diagnostic equipment to properly assess and troubleshoot issues
Maintain accurate records of projects including machine assembly, start up and installation
Participate in daily meetings, prioritizing and reviewing the daily schedule of work
Operate for trucks, man lifts, cranes, etc.

Fulltime

Select Country

Slitter operator

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Slitter operator

Slitter Operator

Slitter Operator

Slitter Operator

Laser Slitter Operator

Machine Operator: Jumbo Slitter - VSL4 - 2nd shift

Machine Operator 2

Slitting Operator

Mechanical Maintenance Technician

Our AI answers in your language