Skin Quality Mechanic Job at Boeing (Wichita)

Skin Quality

This role is at Spirit AeroSystems, Inc. a wholly owned subsidiary of The Boeing...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

2+ years of precision hand forming and sanding skills
Minimum of 2 years’ experience with the following tools: In line die grinder, 90 degree die grinder, Orbital sander, Jitterbug
All applicants must be willing and able to work any shift, including alternative work weeks
All Candidates must pass the WorkKeys Assessment or provide verification that they have passed the WorkKeys Assessment

Job Responsibility

Set-up, support and production of high-quality products
Support planning, checking, establishing a sequence of work to fabricate, assemble and inspect hardware
Perform multitasking and multi-machine operation
Use any equipment needed to prioritize, complete and process work assignments
Perform any pickup, touch-up, rework, non-conformance, part mark and incorporation of changes to the product as required
Utilizes precision measuring equipment to perform self-inspection of in-process and finished work
Perform routine minor machine maintenance as part of their daily work duties
Read and interpret blueprints, sketches, technique sheets, work orders, and other documentation
Routinely move products within the shop-defined area
Performs verification of dimensions of parts using both mechanical and electronic precision measurement tools

What we offer

competitive base pay and variable compensation opportunities
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
paid and unpaid time away from work
Kansas Aviation tax credit of $5,000 for up to five years
generous company match to your 401(k)
industry-leading tuition assistance program pays your institution directly

Fulltime

New

Cardiovascular Radiology Tech

As our Radiologic Technologist (Rad Tech), you will be pivotal in producing diag...

Location

United States , Kearney

Salary:

29.36 - 43.68 USD / Hour

American Nursing Care

Expiration Date

Until further notice

Requirements

Registered Technologist Radiography ARRT, upon hire and
Medical Radiographer: NE, upon hire and
Basic Life Support - CPR, upon hire and
Advanced Cardiac Life Support, within 90 Days

Job Responsibility

Assists with pre-procedure education and preparing patient for procedure
Collaborates with other staff to assure patient has a thorough understanding of procedure and is able to answer questions as needed
Assures patient is positioned properly for the procedure
Assures EKG electrodes are properly placed and cardiac electrodes correctly applied
Assures skin is prepped and sterilized appropriately prior to procedural draping
Sets up patient and sterile equipment in accordance to the performing physician’s preferences
Scrubs and assists physicians during procedures
Assists physician in sterile placement of invasive and hemodynamic monitoring equipment
Uses fine motor skills to assist physician with the placement/deployment/use of invasive catheters, wires, balloons, stents, structural heart devices, Intra-aortic balloon counter-pulsation equipment, percutaneous left ventricular assist devices, implantable cardiac devices, and electrophysiology catheters/3-D intra-cardiac conduction mapping
Performs monitoring function throughout procedures

What we offer

Up to a $10,000 sign-on bonus and $10,000 educational assistance available to external candidates
medical
prescription drug
dental
vision plans
life insurance
paid time off
tuition reimbursement
retirement plan benefit(s) including, but not limited to, 401(k), 403(b), and other defined benefits offerings

Fulltime

Special Procedure Technologist III (Cath Lab)

Location

United States , Tucson

Salary:

Not provided

Tucson Medical Center

Expiration Date

Until further notice

Requirements

Associate's degree or equivalent from a two-year college or technical school in specialty area preferred
Five (5) year of special procedures or EP experience
or demonstrated competency in all areas of EP/Lab related experience
Current Arizona Certified Radiologic Technologist (CRT) and American Registered Radiologic Technologist (ARRT), OR Registered Cardiovascular Invasive Specialist (RCIS) required
Basic Life Support (BLS) certification, and Advanced Cardiac Life Support (ACLS) certification required
For EP: Preferred Certification from the International Board of Heart Rhythm Examiners for Special Competency in Cardiac Electrophysiology for the Associated Professional
Additional certification may be required per department

Job Responsibility

Ensures an informed patient consent form has been properly executed
Performs all basic functions of scrub assistant
assists in collection of specimens
Maintains sterile technique and assists physicians in procedures as requested
drapes patients for surgical procedures using accepted sterile technique
prepares patient's skin for surgery
Prepares angio suite for specific procedures, including table setup, instrument array, and supplies
opens sterile supplies and sets up for all procedures
maintains adequate aseptic supplies during procedures
Assists in maintaining a correct count of all instruments, sutures and sponges during surgical procedures

What we offer

$20,000 Sign on Bonus with 2+ years of related experience

Fulltime

Assembly Mechanic

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Berkeley

Salary:

24.00 - 51.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Assembly experience in a manufacturing environment or equivalent military experience
Experience in electrical, mechanical, and/or structural work
Experience using hand tools and/or hand-held power tools

Job Responsibility

Read and interpret engineering drawings, blueprints, and technical specifications to understand assembly requirements for structural components
Assemble structural components, including beams, frames, panels, brackets, and other structural elements, using hand tools, power tools, and measuring instruments
Assemble precision assemblies, set up and operate ream fixtures to drill, ream, countersink, spot face, hone and bore for mating major assemblies
Install press fit bushings and force fit bushings
File, fit, hone, ream, drill, tap, saw, burr and adjust
Assemble a variety of production aircraft and spacecraft parts and install aircraft equipment, support equipment or power plant equipment
Install structural components into production aircraft ensuring proper alignment and connection
Test assembled structural systems to ensure functionality, safety, and compliance with quality standards
Assemble aircraft and/or spacecraft structures or aircraft and/or spacecraft support equipment structures with or without the aid of jigs and fixtures by drilling, reaming, countersinking, stop countersinking, dimpling as assigned, burring, fastening, filing, filling, fitting, aligning, trimming, shimming and remove surface defects as assigned
Perform skilled assembly operations such as: shimming, fitting, trimming and aligning which may vary considerably from one assembly to another as with fairings and the mating of major assemblies

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs

Fulltime

Material Prep

Material Prep prepares the components for the layup line to build.

Location

United States , Fort Mill

Salary:

19.00 USD / Hour

Owens Corning

Expiration Date

Until further notice

Requirements

Knowledge of all skin species, attention to detail in identifying skin defects, quality specs, pass/no pass parameters, read/interpret tickets/schedules and read a tape measure
Advanced knowledge of SKU's, material cut requirements, and coordinating material flow to/off skin lines
Knowledge of procedures, order tracking process and documents, door types, use of tape measure, pull requirements for materials/doors from main warehouse, knowledge of table saw operation
Excellent memory recall
Must have a high attention to detail
Must be mechanically inclined and have good math and measurement skills
Must read and write English

Job Responsibility

Reads/interprets schedules, pulls accurate materials/door skins, knowledge of material locations
Read tickets/schedules to determine correct materials, counts /stacks skins onto cull board in correct orientation and in order of the schedule
Adds the correct amount of cull boards, reject bad cull boards, inspect and record reject skins, inspect and return skins to correct location
Records schedule # line # stack # date and initials on each stack of skins, flip over the top skin on skin stacks to be restocked
Highlight/identify special cut skins on printed schedule, measure and set-up skins to cut to width and length based on chart specifications, must know all skin SKU’s, be able to hold and cut up to 10+ skins at a time
Uses tape measure use to 32th of an inch, validates accuracy of skins before/after cuts, complete quality inspection and preflipping skins in proper orientation, correct count, and in order of the schedule
Other duties as assigned by leadership team

Fulltime

Process Mechanic

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Wichita

Salary:

20.50 - 39.32 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

3-5 years of relevant experience
Willing and able to work any shift, including alternative work weeks
Must pass the WorkKeys Assessment (workkeys.com) or provide verification of having passed it
Must be a 'U.S. Person' as defined by 22 C.F.R. §120.15 (U.S. Citizen, lawful permanent resident, refugee, or asylee) for export control compliance
Must present two (2) forms of identification for WorkKeys Assessment verification

Job Responsibility

Set-up, support and production of high-quality products
Help create a highly productive work environment
Planning, checking, establishing a sequence of work to fabricate, assemble and inspect hardware to planning, engineering and quality control requirements
Developing new and improved methods of production
Perform multi-tasking and multi-machine operation
Use any equipment needed to prioritize, complete and process work assignments
Perform any pickup, touchup, rework, part mark and incorporation of changes to the product as required
Work from prints, sketches, specifications and written/verbal information
Maintain certifications, qualifications, licenses or permits as required to perform work
Utilize precision measuring equipment to perform self-inspection

What we offer

Competitive base pay and variable compensation opportunities
Opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and programs that provide for both paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
May be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Lead Caregiver/Memory Care Coordinator

This position is responsible for program development and implementation within t...

Location

United States , Burlington

Salary:

19.00 - 21.00 USD / Hour

Dewolfe Place

Expiration Date

Until further notice

Requirements

One (1) year dementia care experience
One (1) year in a leadership role
Previous caregiver experience

Job Responsibility

Designs, schedules and facilitates Memory Care program incorporating Life Skills and a variety of dementia appropriate activities
Partners with the RDRC to ensure a variety of appropriate activities are available throughout the day and evening and that Care Managers are actively involved and engaged with activities
Partners with the RDRC in compiling, coordinating and executing a comprehensive and varied program of activities to meet the broad spectrum of interests and capabilities of Memory Care residents
Provide ongoing in-service education to the Memory Care staff that is relative to the disease processes and population being served
Prior to move-in, reviews the resident’s preferences and needs educating Care Managers of same
Facilitates the Service Plan and Daily Assignment Sheet development to ensure excellence in service delivery, safety, hydration and resident engagement in programming
Acts as the community champion in Memory Care programming and activities
Partners with dining services to ensure meeting individualized resident needs and preferences
participates in dining experience
Understands resident changes in condition and reports to the nurse

What we offer

Medical
Dental
Vision
Life insurance
Disability insurance
Paid time off
Paid holidays
401(k) plan with company match
Employee Assistance Program
Accident insurance

Fulltime

Design Release Engineer – Instrument Panel, Console, Outlets and Deco Trim

This role is categorized as hybrid, meaning the selected candidate will be expec...

Location

United States , Warren

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor of Science in Engineering (Mechanical, Automotive, Aerospace, Materials or related)
8–10 years in the commodity: instrument panel, floor console, and decorative trim development with end‑to‑end exposure from early product definition through launch
Demonstrated outstanding performance in subsystem ownership, issue resolution, and on‑time delivery to vehicle development milestones
Sub‑system expertise in injection molded trim, foam‑in‑place, thermoformed skins, and cut‑and‑sew wrapping of substrates
Detailed knowledge of IP, IP Structure, and Floor Console performance requirements, applicable regulations, and best practices
Proven proficiency in component/subsystem design and development, vehicle integration, and design for manufacturability/automation
Mastery of DFMEA/DRBFM, ADVP&R development (validation plans), ICDs, and PFMEA collaboration with Manufacturing Engineering
Strong partnership with CAE (including Safety Performance) to validate robustness and inform design iterations using data‑driven decisions
DFSS Green Belt required
Black Belt preferred

Job Responsibility

Design, development, analysis, implementation, and validation of the complex instrument panel and console subsystems
Perform engineering design evaluations and concept development across vehicle programs
Utilize engineering tools (DFMEA, ICDs, PFMEA) and leverage CAE groups including Safety Performance to successfully develop the best system solution
Assessment of design to manufacturing processes (e.g. injection molding, vibration welding, vacuum forming, foam-in-place, wrapping)
Package components, manage CAD development through supplier or GM designers, and collaborate with other systems within the vehicle (Thermal, Electrical, Body, Chassis, Restraints, etc.)
Ensure best practices are incorporated in the CAD models and seek support when best practices are not met
Schedule and lead Peer Reviews to analyze the design with technical peers
Work cross-functionally to support initial vehicle configuration work, realize cost optimization, deliver customer-driven requirements, and implement product and process improvements
Balance business imperatives, including but not limited to cost, part count, mass, complexity, timing, and content
Communicate information to and from internal and external customer organizations (e.g. Creative Design, Purchasing, Manufacturing, Quality, suppliers) and lead the product development team (PDT)

Fulltime

Select Country

Skin Quality Mechanic

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?