Sheet Metal Installer Job at Cullum Mechanical (Charleston)

Sheet Metal Worker

Fabricate, assemble, install, and repair sheet metal products and equipment, suc...

Location

Australia , Berrimah

Salary:

Not provided

Airducter

Expiration Date

Until further notice

Requirements

Possess a sheet metal qualification and/or have extensive experience in this field
Experience in a HVAC&R industry
Good analytical skills and enjoy problem solving
Good hand-eye coordination
High level of attention to detail
Take pride in your work
Manual Drivers Licence is mandatory
Ability to successfully gain various federal police and security clearances as required
OCHRE Card (Working with Children), or have the ability to gain

Job Responsibility

Read and interpreting drawings
General fabrication, insulation, assembly and installation of sheet metal product
stainless steel and aluminum welding
Operating computer controlled machines and fabricating machines, and monitoring the machine and the process
Install assemblies such as flashing, pipes, tubes, heating and air conditioning ducts, inspecting, assembling, and smoothing seams and joints of burred surfaces

Fulltime

Sheet Metal Worker

Full-time Sheet Metal Worker position available with competitive salary. Work in...

Location

Australia , Revesby

Salary:

75000.00 - 90000.00 AUD / Year

11 Recruitment

Expiration Date

Until further notice

Requirements

Relevant qualification
Minimum 1 year work experience
Good work ethic and technical skills
Expertise to read technical drawings
Knowledgeable to use machine tools and bench op tools equipment

Job Responsibility

Fabricating sheet metal products based on technical drawings
Cutting, bending and stamping sheet metal in accordance with design instructions
Installing and assembling sheet metal products, using joining techniques such as welding, bolting and riveting
Performing routine and unplanned maintenance on sheet metal products
Repairing sheet metal panels

What we offer

superannuation

Fulltime

Sheet Metal Worker

Full-time Sheet Metal Worker position available with competitive salary. Work in...

Location

Australia , Sefton

Salary:

75000.00 - 95000.00 AUD / Year

11 Recruitment

Expiration Date

Until further notice

Requirements

Proficiency in interpreting technical drawings, sketches and specifications
Extensive knowledge of various metal materials, their properties and applications
Strong fabrication skills, including cutting, bending and stamping techniques
Proficiency in installing and assembling Sheetmetal products using various techniques
Excellent attention to detail and commitment to quality standards
Strong problem-solving skills and ability to work independently or as part of a team
Minimum Certificate level or equivalent relevant work experience
Minimum one year of work experience on relevant position
White card- to work out on site

Job Responsibility

Interpreting technical drawings and blueprints for projects and assessing the processes, materials and tools needed
Measuring and marking pieces of sheet metal according to the plans and cuts required
Cutting, bending, and stamping sheet metal to match design instructions.
Welding, soldering, bolting, brazing and riveting sheet metal to put together and install metal items.
Install piping, tubing, and ducting for heating, ventilation and air conditioning systems and installing metal roofing sheets, guttering and downspouts.
Soldering and insulating roof coverings to make them waterproof.
Applying paint and rust inhibitors to sheet metal to improve their appearance and protect the material.
Assessing damaged or rusty sheet metal products and repairing or replacing them as required.
Inspecting installed and repaired sheet metal products to make sure they’re fit for purpose, waterproofed and sealed.
Perform routine and unplanned maintenance on roofing and cladding and on the ducting and piping of air conditioning systems.

What we offer

Competitive salary based on experience
Opportunities for professional growth and training
A supportive and dynamic work environment
Work on exciting projects with cutting-edge technology
superannuation

Fulltime

Sheet Metal Worker

Working with and under the guidance of the Certifying Engineer on the aircraft a...

Location

United Kingdom , Luton

Salary:

37375.00 - 42644.00 GBP / Year

Chevron Recruitment Agency

Expiration Date

Until further notice

Requirements

Have a recognised apprenticeship within the aircraft industry
Understand the Regulatory requirements in relation to Part 145
Proven work history in an aviation maintenance environment
Excellent SMW hand skills
Be able to demonstrate technical experience as well as leadership behaviours, be able to work on your own initiative and make timely decisions

Job Responsibility

Perform sheet metal work activities on fabricated parts including assembly fixtures, drilling, deburring, filling insets and general SMW activities
Maintain work area, equipment and records to be audit ready
Manufacture and fabricate aircraft SMW parts, panels, doors etc from various services aircraft. Determine type and extent of repair or replacement required, type of material and repair methods to use. Lay out, cut from, join, assemble and install items
Ability to understand and interpret customer specifications and technical drawings
Be able to carry out maintenance, repairs, fabrication of parts and /or production tasks to the standard specified in the technical data and notify supervisors of defects or mistakes requiring rectification. This may include (but is not limited to): Cleaning, re-protecting, painting, finishing, cutting, grinding, blending, forming (of metal), measuring, removal/installation of fasteners, sealing, drilling
Ensure all paperwork is completed to the required standards and in line with the company MOE
Ensure correct use and accuracy of the MRO system is maintained with regards to all maintenance activities
Maintain awareness and knowledge of regulatory requirements and any associated changes in relation to EASA Part 145, Part M and Part 66
Maintain awareness and knowledge of requirements and any associated changes in relation to company health and safety policies and procedures as they apply to aircraft maintenance operations, with specific focus on working at height and the use of plant & machinery
Ensure activities meet with and integrate with company requirements for quality management, health and safety, legal stipulations, environmental policies and general duty of care

Fulltime

Sheet Metal Worker

Working with and under the guidance of the Certifying Engineer on the aircraft a...

Location

United Kingdom

Salary:

35125.00 - 40394.00 GBP / Year

Chevron Recruitment Agency

Expiration Date

Until further notice

Requirements

A recognised apprenticeship within the aircraft industry or similar
Understanding of regulatory requirements in relation to Part 145
Proven work history in an aviation maintenance environment
Excellent SMW hand skills
Understanding of Health & Safety, Human Factors and Compliance requirements
High standard of English language (written and oral)
High standard of computer literacy, especially Microsoft Office Suite

Job Responsibility

Perform sheet metal work activities on fabricated parts including assembly fixtures, drilling, deburring, filling insets and general SMW activities
Maintain work area, equipment and records to be audit ready
Manufacture and fabricate aircraft SMW parts, panels, doors etc from various services aircraft
Determine type and extent of repair or replacement required, type of material and repair methods to use
Lay out, cut from, join, assemble and install items
Ability to understand and interpret customer specifications and technical drawings
Be able to carry out maintenance, repairs, fabrication of parts and /or production tasks to the standard specified in the technical data and notify supervisors of defects or mistakes requiring rectification
Ensure all paperwork is completed to the required standards and in line with the company MOE
Ensure correct use and accuracy of the MRO system is maintained with regards to all maintenance activities
Maintain awareness and knowledge of regulatory requirements and any associated changes in relation to EASA Part 145, Part M and Part 66

What we offer

£2,250 SHIFT PAY
£5,000 AOG PAYMENT(DOE)

Fulltime

Technician, Structures

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Tucson

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Typically 0-2 years structural sheet metal repair / modification experience or substantiated similar experience
You have completed sheet metal A/C Tech school or equivalent schooling
You can interpret and work with mechanical engineering drawings
You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You are able to work unscheduled overtime including nonscheduled work days and holidays
You are able to work in seasonal/inclement weather outside
You can obtain a Security Identification Display Area badge (SIDA) (If applicable)
You possess basic PC skills

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures. Participate in 5-S activities. Perform work in a safe and timely manner
Troubleshoot, repair, inspect and perform maintenance on customer aircraft
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Structures Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Received training from a sheet metal aircraft technical school or equivalent schooling
Typically have at least 3 years of aircraft structural sheet metal repair / modification experience
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own a basic set of hand tools with the ability to demonstrate Inventory and control of tools
Ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required
Able to work unscheduled overtime including nonscheduled work days and holidays
Able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) if applicable
Have basic PC skills

Job Responsibility

Troubleshoot, repair, inspect and perform maintenance on customer aircraft
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Assist with aircraft component repair
Remove / install aircraft components as required
Comply with environmental health and safety policies/procedures
Participate in 5-S activities
Perform work in a safe and timely manner

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Sheetmetal Worker

Full-time Sheetmetal Worker position available in Canberra 2620 ACT. CBR Mechani...

Location

Australia , Canberra

Salary:

76500.00 - 90000.00 AUD / Year

11 Recruitment

Expiration Date

Until further notice

Requirements

Certificate III in Fabrication Trade or a minimum of 3 years of relevant work experience
Proficient in designing and manufacturing sheet metal products, including ducts, tubes, and hoses
Strong ability to interpret blueprints and a solid understanding of sheet metal assembly technologies
Skilled in the use of machine tools and workbench tools
Excellent physical strength and endurance for demanding tasks
At least 1 year of proven work experience within the ductwork industry

Job Responsibility

Fabricate and assemble sheet metal components specifically designed for HVAC systems, ensuring precision and durability in every project
Accurately measure, mark, cut, bend, and shape metal sheets using a variety of hand tools, power tools, and specialized machinery
Install ductwork and sheet metal structures in both residential and commercial settings, expertly fitting and joining components using advanced joinery techniques
Finish and refine products by smoothing edges, polishing surfaces, and ensuring each installation maintains a clean, professional appearance
Interpret technical drawings, blueprints, and work orders to execute installations with accuracy and compliance
Guarantee that all work aligns with industry standards and the company’s quality benchmarks, delivering results that exceed client expectations
Conduct routine maintenance and repair work on existing systems to ensure long-term performance and reliability
Work collaboratively with team members to complete projects on time and to the highest standard, fostering a supportive and productive team environment
Maintain strict adherence to safety protocols while ensuring a tidy, well-organized, and hazard-free work area at all times

What we offer

superannuation

Fulltime

Sheet Metal Installer

Cullum Mechanical

Location:
United States , Charleston

Category:
Construction

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 08, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Sheet Metal Installer

Sheet Metal Worker

Sheet Metal Worker

Sheet Metal Worker

Sheet Metal Worker

Sheet Metal Worker

Technician, Structures

Structures Technician

Sheetmetal Worker

Sheet Metal Installer

Cullum Mechanical

Location:United States , Charleston

Category:Construction

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 08, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Sheet Metal Installer

Sheet Metal Worker

Sheet Metal Worker

Sheet Metal Worker

Sheet Metal Worker

Sheet Metal Worker

Technician, Structures

Structures Technician

Sheetmetal Worker

Location:
United States , Charleston

Category:
Construction

Contract Type:
Not provided

Job Posted:
December 08, 2025