Sheet Metal Fabricator Job at Unique Metals Laser (Wangara)

New

Trades Specialist V- Sheet Metal Shop

Under general supervision of shop foreman, performs skilled craftsman level trad...

Location

United States , Charleston

Salary:

Not provided

MUSC Health

Expiration Date

Until further notice

Requirements

A high school diploma and three years trade experience that is directly related to the area of employment. Some positions require a commercial driver's license. Some positions require EPA-approved freon recovery certification. Ability to perform job functions in an upright position. (Continuous) Ability to perform job functions in a seated position. (Frequent) Ability to perform job functions while walking/mobile. (Continuous) Ability to climb. (Continuous) Ability to work indoors. (Continuous) Ability to work outdoors in all weather and temperature extremes. (Continuous) Ability to work below ground. (Continuous) Ability to work from elevated areas. (Infrequent) Ability to work in confined/cramped spaces. (Continuous) Ability to perform job functions from kneeling positions. (Continuous) Ability to bend. (Continuous) Ability to twist at the waist. (Frequent) Ability to perform 'pinching' operations. (Infrequent) Ability to crawl while performing job functions. (Frequent) Possess good grip strength. (Continuous) Ability to fully use both hands/arms. (Continuous) Ability to perform repetitive motions with hands/wrists/elbows and shoulders. (Frequent) Ability to fully use both legs. (Continuous) Ability to reach in all directions. (Frequent) Ability to maintain tactile sensory functions. (Continuous) Ability to maintain good olfactory sensory function. (Continuous) Ability to lift up to 50 lbs., unassisted. (Frequent) Ability to lift 50 lbs. or more, assisted. (Frequent) Ability to carry objects on plane, on ladders, up stairs, etc., weighing up to 50 lbs, unassisted. (Frequent) Ability to push/pull equipment carts. (Frequent) Ability to maintain 20/40 vision, corrected. (Continuous) Ability to match or discriminate between colors. (Continuous) Good peripheral vision capabilities. (Continuous) Ability to maintain hearing acuity, with correction. (Continuous) Ability to operate winches, come-alongs, jacks, etc. (Continuous) Possess maintain dexterity in order to use hand tools, both manual and powered. (Continuous) Ability to qualify physically for respirator use. (Continuous) Ability to obtain and maintain a valid drivers license. Ability to obtain and maintain EPA Approved Freon recovery certification.

Job Responsibility

Maintain work area and jobsites in a clean and orderly manner and performs miscellaneous and related duties as required
Coordinate repairs and inspections with Energy Management Operator for proper shutdown and start-up of air conditioning systems throughout campus. Assists in repairing various items made of sheet metal, laundry carts, benches, tables, etc. with assistance using metalsmith trade hand tools, such as power tools, hand break, power shear, and roller machine
Supervises and instructs mechanics of lower grade. Inform supervisor of any problems that may affect proper operation of equipment
Reset air conditioning and refrigeration system and check for proper operation after power failure. Adjusts and calibrates pneumatic and electronic controls
Assist in the fabrication and installation of sheet metal, duct work and forming various shapes of sheet metal. Make installation tests, and repairs in accordance with EPA and other applicable regulatory agency guidelines
Installs all sizes and type of HVAC systems. When working on equipment, ensures there are no unauthorized gas releases into the atmosphere

Fulltime

Revit HVAC / Sheet Metal BIM Modeler/Detailer (VDC)

Location

United States , Oak Ridge

Salary:

Not provided

Apollo Mechanical Contractors

Expiration Date

Until further notice

Requirements

Strong working knowledge of HVAC sheet metal systems, ductwork layout, and mechanical equipment in commercial, industrial, or mission-critical facilities
Proficiency in Autodesk Revit and Fabrication MEP tools, Navisworks, and Bluebeam
Understanding of BIM coordination processes, including clash detection, model integration, and multi-trade collaboration
Ability to interpret construction documents, specifications, and engineering drawings and translate them into accurate BIM models
Familiarity with fabrication workflows, spool drawings, and installation sequencing is highly preferred
Strong attention to detail with the ability to work in a fast-paced, deadline-driven project environment
Minimum of 1-2 years of experience utilizing Revit in a BIM or detailing environment
Preferred 3–5+ years of practical field experience in HVAC sheet metal fabrication and installation
Demonstrated experience supporting fabrication-driven or construction-focused BIM workflows is highly desirable
Associate’s or Bachelor’s degree in Drafting, Engineering Technology, Construction Management, or a related field, or equivalent combination of education and hands-on industry experience

Job Responsibility

Utilize Autodesk Revit, Fabrication MEP, and related BIM software to develop detailed 3D models, shop drawings, and installation drawings for HVAC sheet metal systems
Produce coordinated fabrication-level drawings that support field installation, prefabrication, and constructability requirements
Collaborate with project teams, including engineering, field operations, and other trades, to ensure accurate coordination within a virtual construction (BIM) environment
Participate in clash detection, coordination meetings, and model reviews to resolve design and layout conflicts
Support model development from concept through construction, commissioning, and project closeout, ensuring alignment with project schedules and deliverables
Maintain and apply company BIM standards, templates, and workflows to ensure consistency, accuracy, and quality of all deliverables
Assist with project setup, model organization, and data management to support efficient BIM execution and downstream fabrication processes
Interface with fabrication shops and field teams to ensure model outputs align with fabrication methods, installation sequencing, and prefabrication strategies

What we offer

Medical, Dental, and Vision
401K with company Match
STD, LTD, Voluntary Life benefits
Paid Time off

Fulltime

Aircraft Sheet Metal Specialist Senior

The Senior Sheet Metal Specialist is responsible for repairing and creating esse...

Location

United States , Vance AFB

Salary:

46.83 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High School diploma or equivalent
Must be able to obtain and maintain a valid driver's license with Real ID within 30 days of employment
Must be able to obtain and maintain site access. Note: U.S. Citizenship is required to obtain site access.
Must have four (4) years of maintenance experience and must include two (2) years of sheet metal experience on like assigned aircraft (DD 214 or employment record)
Oversees projects and handles complex repairs.
Knowledge of aviation safety regulations and standards.
Must be able to meet the physical requirements as stipulated in Appendix E of the CBA.

Job Responsibility

Skilled in and interpreting blueprints, technical manuals, and engineering drawings
Fabricating and repairing sheet metal parts and components for aircraft.
Using specialized tools such as cutting, bending, and assembling metal materials.
Responsible for completion and accuracy of aircraft/equipment forms documentation and MIS input.
Accomplishes all maintenance forms required by duties.
Performs other duties as assigned.

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Sheet Metal Worker

2Excel Aviation Ltd is an industry leader in specialised and innovative solution...

Location

United Kingdom , Doncaster

Salary:

47000.00 - 50000.00 GBP / Year

360 Resourcing Solutions

Expiration Date

Until further notice

Requirements

Proven experience as a Sheet Metal Worker in an aerospace engineering environment
Ability to read and interpret engineering drawings and aerospace specifications
Experience with aircraft structures, brackets, panels, racking or similar fabricated assemblies
Knowledge of aerospace fasteners, riveting techniques and sheet metal forming
Experience working within regulated aerospace quality systems (e.g., AS9100 or Part 21) is desirable
Strong attention to detail and commitment to quality

Job Responsibility

Manufacture and assemble aircraft sheet metal components and assemblies in accordance with engineering drawings and specifications
Carry out forming, bending, drilling, countersinking, deburring and riveting of metallic and non-metallic components
Interpret and work from engineering drawings, work instructions and technical documentation
Ensure all work is completed in accordance with Part 21 Subpart G procedures and company quality requirements
Maintain accurate production and inspection records
Work closely with the design team to ensure compliance and efficiency
Follow all Health, Safety and SMS (Safety Management System) requirements within the facility
Support continuous improvement initiatives within the production environment

What we offer

25 days holiday per year from day one, plus bank holidays
5% matched Pension scheme
Group Life Insurance
Health and Wellbeing benefits including Private Health Care and an EAP

Fulltime

Sheet Metal Pre-Apprentice

The purpose of the Sheet Metal Pre-apprentice is to assist Sheet Metal Journeyme...

Location

United States , Cedar Rapids

Salary:

Not provided

Modern

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
Ability to work Holidays, Weekends & OT
Valid Driver’s License
Ability to travel to job sites and/or customer locations as required
Must be detail oriented
Good interpersonal, written and verbal communication skills
Must be able to work effectively as a member of a team
Must be able to lift 50 lbs. safely
Must be able to work in high pressure situations facing strict deadlines

Job Responsibility

Loading/unloading vehicles
Forklift operation
Deliveries to customer sites as needed
Clean work area and restock supplies and materials as necessary
Assist in lifting, positioning and securing of materials and work pieces during installation
Perform minor maintenance or cleaning of tools and equipment
Smooth seams, joints, or burned surfaces, using files or grinders
Use hand tools, power tools, machines and equipment
Trim, grind, de-burr, buff and smooth surfaces using hand tools or portable power tools
Clamp, hold, heat-bend, bolt or grind spare parts as necessary to satisfy the technical requirements and create a final welded product

Fulltime

Sheet Metal Mechanic

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Wichita

Salary:

23.66 - 39.32 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Must be able to work on concrete floors, uneven surfaces, and in confined spaces, as well as walk on open floor beams, climb on stairs/scaffolding, crawl/kneel in workstation, and lift/move parts and/or tools
The main tasks of the position consist of constant drilling, bucking and riveting for an 8-hour shift along with overtime as needed by production needs
A post-offer physical examination is required to confirm applicants are able to perform the physical tasks of the position, with or without reasonable accommodation. The physical demands of the position include standing, squatting, kneeling, crawling, reaching, lifting, pulling, overhead work, fine hand and finger manipulation, and related physical tasks necessary to perform the responsibilities of the position as set out above
All Candidates must pass the WorkKeys Assessment (www.workkeys.com) or provide verification that they have passed the WorkKeys Assessment
All applicants must be willing and able to work any shift, including alternative work weeks.

Job Responsibility

Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components
Obtain required information from prints, charts, sketches, work instructions, documents, verbal and electronic information
Use shop mathematics and precision measuring and or test instruments to complete work assignments and functional test assemblies and components
Utilize tooling in the assembly of components into sub-assemblies or end items
Verify work performed is per work instructions and meets process and/or engineering specification. Identify discrepancies found per applicable procedure
Ensure equipment and tool certification occurs per procedure
Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties)
Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building
Perform work within allotted schedules
Support the continuous flow of product within the manufacturing process by training and assisting employees at all classification levels

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
competitive base pay and variable compensation opportunities
health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work
$5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Sheet Metal Mechanic

Sheet metal mechanics are responsible for creating and installing building parts...

Location

United States , Norfolk

Salary:

Not provided

Baesystems

Expiration Date

Until further notice

Requirements

Minimum education requirements: High school diploma/GED
Minimum relevant experience: 3 to 5 yrs.
Must be able to read, write and comprehend simple instructions
Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form
Must be able to calculate and understand units of measure, including fractions and decimals
Must know how to measure using a scale and tape measure
Must be able to function and operate hand tools and power tools with no assistance
Must be able to wear applicable PPE (Hard hat, safety goggles, gloves, steel toes shoes, ear protection, face shields, Tyvek suits and respirators)
Must be able to obtain government access badge.
U.S. Person Required

Job Responsibility

Familiar with various sheet metal types and sizes
Measure appropriate size of sheet metal
Read and understand basic drawings, sketches and written requirements
Complete Habitability work while partnered with higher class mechanics
Know various materials to include galvanized steel, aluminum, stainless steel, etc.
Operate and use trade power tools
Remove and contain the PCB chemical in gasket material
Read sketches
Assist advanced mechanics with fabrication process
Fabricate most sheet metal items, vent, flashing, pans, boxes, etc.

What we offer

health, dental, and vision insurance
health savings accounts
a 401(k) savings plan
disability coverage
life and accident insurance
employee assistance program
legal plan
discounts on things like home, auto, and pet insurance
paid time off
paid holidays

Fulltime

Aircraft Sheet Metal – Structures Mechanic

Yulista has immediate openings for qualified Aircraft Sheet Metal – Structures M...

Location

United States , Birmingham

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
Level II: 5+ years of relevant aircraft depot level structural maintenance experience with fixed / rotary wing commercial, Government or DOD aircraft
Level III: 12+ years of relevant aircraft structural maintenance experience with fixed / rotary wing commercial, Government or DOD aircraft, 5+ years of which having performed depot level structural maintenance
Ability to read and interpret documents such as engineering drawings, technical documentation, operating and maintenance instructions, and procedure manuals
Highly knowledgeable of fixed wing aircraft construction features, identification and characteristics of aerospace materials
Extensive knowledge in fabrication and depot repair / replacement of metal components, tubing, cable, plastic, fiberglass, bonded honeycomb, and composite structural components
Intermediate computer skills specifically using Microsoft Office Suite
Ability to use general office equipment such as fax, phone, copier, scanner, printers
Ability to follow processes
Ability to perform basic mathematical computations

Job Responsibility

Inspect / assess damage to aircraft structural components and formulate proper repair/replacement procedures
Remove and install close tolerance, high-strength fasteners in major aircraft structural components
Designs structural repair, modification, and corrosion protection treatments
Perform post repair flight control weight and balance functions as well as control surface rigging
Inspect components/repairs for structural serviceability
Manufactures / use jigs, fixtures, forms, and molds to fabricate repair or replacement parts
Use advanced metalworking practices, equipment, and tools to form, cut, bend, and fasten replacement or repair parts
Able to train shop drawing and depot level metal layout techniques
Recommends methods to improve equipment performance and maintenance procedures
Uses automated maintenance systems

What we offer

Values culture, teamwork, and atmosphere
Competitive pay
Robust benefits package

Fulltime

Select Country

Sheet Metal Fabricator

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?