Service Technician Surface Technology Job at Rema Tip Top (Kamen)

New

Maintenance Technician

The Industrial Maintenance Technician is responsible for performing complex mech...

Location

United States , Rockford

Salary:

32.00 - 36.00 USD / Hour

Owens Corning

Expiration Date

Until further notice

Requirements

Minimum 3 - 5 years of industrial maintenance experience in manufacturing, heavy industry, or related environment
High school diploma or GED required
Technical schooling or certifications in Industrial Maintenance, Electronics, Mechatronics, Electromechanical Technology, Automated Systems, or related field
Proven experience troubleshooting both mechanical and electrical industrial systems
Ability to work independently with limited supervision
Strong communication, documentation, and organizational skills
Lift up to 50 lbs routinely without assistance
Stand/walk for extended periods on concrete surfaces
Work 12-hour shifts in hot/cold industrial environments
Use PPE including steel-toe boots, safety glasses, hearing protection, and long sleeves

Job Responsibility

Maintain, troubleshoot, and rebuild gearboxes, bearings, shafts, couplings, chain drives, belts, and mechanical power transmission components
Service and repair hydraulic and pneumatic systems, cylinders, valves, pumps, hoses, regulators, filters, and actuators
Inspect, align, lubricate, and replace components on conveyors, extruders, and material handling equipment
Perform corrective maintenance and collaborate on reliability improvements
Troubleshoot and repair 480V (high voltage) industrial electrical systems, motors and circuits
Diagnose and repair AC/DC motors, contactors, starters, relays, and VFDs
Perform root-cause analysis on electrical faults, nuisance trips, and equipment failures
Work with instrumentation including sensors, flow/pressure devices, temperature controls, and limit switches
Read/interpret electrical schematics, wiring diagrams, and control documentation
Execute preventive, predictive, and emergency maintenance using SAP

What we offer

Quarterly VIP Bonuses
Multiple comprehensive Medical, Dental, Vision & Prescription options
Healthy living incentives and rewards
Paid Time Off
401k Retirement Savings Plan & Employee Stock Purchase Plan
Company Paid Basic Life Insurance & Short-Term Disability
Sign-On Bonus: $1500.00 after 90 days
Sign-On Bonus: $1500.00 after 180 days
Shift Differential $1.25

Fulltime

Senior Support Technician

We’re looking for a well-rounded IT professional to join our Enterprise IT Opera...

Location

United Kingdom , Bristol

Salary:

Not provided

Just Eat Takeaway.com

Expiration Date

Until further notice

Requirements

End user support experience at an exceptional standard
Experience leading on tasks, projects or people which has been proven in development activities or in practice
An understanding of end user toolset solutions and processes
Exceptional technical skills in Operating systems: Windows 11, macOS and Chrome OS
Applications: Google Apps, Atlassian products (Jira, Confluence), Slack
User/Device management tools: Google Workspace (Users, Groups, Google Meet kit & Chrome devices), Okta, Intune, JAMF
Proactive interest in technological development, keeping up with the latest industry developments, product releases and suggesting/facilitating improvements
Ability to identify process improvements and implement changes where necessary

Job Responsibility

Supporting the end users within the office ensuring suitable processes and support is in place
Own 2nd line tickets end-to-end, including triage, diagnosis, resolution, stakeholder communication, and timely, high-quality closure
Provide desk-side and remote support for Drop-In issues (monitors, docks, peripherals, imaging/builds, connectivity) and core productivity blockers
Resolve incidents across Okta/SSO, Zscaler/VPN, Google Workspace, Atlassian (Jira/Confluence) and Slack, escalating to third parties when required
Fulfil access requests (e.g. TMS and application entitlements), ensuring least-privilege and audit-ready documentation
Support starters/leavers processes, device lifecycle and license hygiene, with accurate records to meet audit requirements
Utilise AI to improve processes and drive change (auto-triage, knowledge surfacing, solution suggestions, self-service and auto-remediation)
Implement automation and orchestration (e.g. Intune/JAMF/Google Admin) for repeatable tasks, compliance checks and consistent audit coverage
Contribute to Problem/Change, refine playbooks and knowledge articles, and support 1st line to uplift first-time-fix
Ensuring the highest level of service is delivered, high performance and quality is maintained and our end user support experience is valued

Fulltime

Electronic Assembly Process Engineer

The person will manage the manufacturing operations that include key processes s...

Location

United States , Atlanta

Salary:

Not provided

Scanfil

Expiration Date

Until further notice

Requirements

Degree in Electronic Engineering and/or 5+ years of prior relevant experience
Experience working with a Contract manufacturer of complex electro-mechanical systems
Possess knowledge and experience with the manufacturing, inspection, and acceptance of Electro-mechanical systems and/or Printed Circuit Boards of varying complexities
Direct knowledge of Manufacturing processes and supply chain logistics from raw material to finished goods
Work with internal process owners and suppliers to develop manufacturing processes, build instructions, and oversee supplier production runs
Support all aspects of electronic and mechanical assembly, including Surface Mount Technology (SMT), through-hole assembly, convection reflow, wave solder, hardware installation, cleaning, conformal coating, potting and box build
Resolve manufacturing and process issues
Develop, qualify, and document assembly steps and manufacturing processes to fit the requirements of all products
Support Supply Chain with analysis of alternate electrical components and commodity management
Identify, design, procure, and validate assembly and test fixtures & tools. Support assembly and test equipment selection process to meet production plans

Job Responsibility

Manage the manufacturing operations that include key processes such as Hand assembly, PCBA (SMT and through-hole), cable and box build assembly
In addition to manufacturing engineering responsibilities, there will be opportunity for some design engineering work (electrical and mechanical)

Remote Dispensary Pharmacy Technician

Location

United States , Two Rivers

Salary:

24.10 - 36.15 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

Registration/Licensure with state board of pharmacy per state of employment requirements
Certification through Pharmacy Technician Certification Board (CPhT) or National Health Career Association (ExCPT)
High school diploma or GED equivalent
Typically requires 1-3 years of experience in health care, insurance industry, pharmacy, or medical background
Excellent oral, written, interpersonal, and customer service skills
Must be able to speak and be understood by others to communicate effectively
Critical thinking and problem-solving skills
Basic math skills
Strong background in medical terminology preferred
Organizational skills and analytical ability to prepare reports and reconcile reports correctly

Job Responsibility

Completes area-specific work as outlined by standard processes, procedures and adherent to policies
Serves as an expert with equipment and technology in specialized area
Problem solves technical issues in the specialized area as they arise
Ensures documents and records are accurate and completed in a timely fashion
Supports methods of communication and coordination with patients and care team
Identifies quality improvement opportunities based on specialized skill set to ensure safe, effective, and efficient services and patient care
Provides input to and supports implementation of operational changes, advancements, and site and system standardization
Participates in site or system specialized work teams, committees, and councils, as applicable
Complies with legal, regulatory, and accreditation standards
Keeps current with changes in the specialized field and collaborates with department leadership to adopt best practices

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program
Premium pay such as shift, on call, and more based on a teammate's job
Incentive pay for select positions
Opportunity for annual increases based on performance

Fulltime

Logistics Team Specialist UEMS

Department: 36201 Union EMS - Ambulance Services. Employee will work at least 40...

Location

United States , Monroe

Salary:

22.90 - 34.35 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

High School Diploma or GED required
applicable state Emergency Medical Technician (Basic) preferred
Requires American Heart Association BCLS
Requires a valid applicable state Driver License, applicable state CDL Class B preferred
Obtains NIMS ICS 100, 200, 700, 800 within 6 months of hire
Duties require good physical stamina, endurance, and body mechanics
Ability to independently lift and balance equipment weighing 56.7 kilograms (125 pounds)
Good motor coordination
Normal eye-hand coordination and finger dexterity
Good oral communication skills

Job Responsibility

Performs routine maintenance of ambulances and other support vehicles
Assists in set up and break down of MHPC Mobile Support Unit and related logistics functions
Performs or schedules preventative maintenance where necessary
Deploys vehicles in emergency situations as needed
Keeps a record of Union EMS assets, equipment, and supplies
Assists the operations division when requested by the operations supervisor
Facilitates and communicates repairs that require specialized skills through outside vendors
Orders equipment and medical supplies as necessary
Oversees and maintains the supply room, and stock locations within the county
Assists the operations division with restock of supplies and shift duties as necessary to ensure ambulances remain in a good state of readiness

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program
Premium pay such as shift, on call, and more
Incentive pay for select positions
Opportunity for annual increases based on performance

Fulltime

Pharmacy Technician Specialist I - Medication History

Onsite at Aurora St. Lukes Medical Center obtaining medication histories. This r...

Location

United States

Salary:

24.10 - 36.15 USD / Hour

Advocate Aurora Health

Expiration Date

Until further notice

Requirements

Registration/Licensure with state board of pharmacy per state of employment requirements
Certification through Pharmacy Technician Certification Board (CPhT) or National Health Career Association (ExCPT)
High school diploma or GED equivalent
Typically requires 1-3 years of experience in health care, insurance industry, pharmacy, or medical background
Excellent oral, written, interpersonal, and customer service skills
Must be able to speak and be understood by others to communicate effectively
Critical thinking and problem-solving skills
Basic math skills
Strong background in medical terminology preferred
Organizational skills and analytical ability to prepare reports and reconcile reports correctly

Job Responsibility

Completes area-specific work as outlined by standard processes, procedures and adherent to policies
Serves as an expert with equipment and technology in specialized area
Problem solves technical issues in the specialized area as they arise
Ensures documents and records are accurate and completed in a timely fashion
Supports methods of communication and coordination with patients and care team
Identifies quality improvement opportunities based on specialized skill set to ensure safe, effective, and efficient services and patient care
Provides input to and supports implementation of operational changes, advancements, and site and system standardization
Participates in site or system specialized work teams, committees, and councils, as applicable
Complies with legal, regulatory, and accreditation standards
Keeps current with changes in the specialized field and collaborates with department leadership to adopt best practices

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program

Fulltime

PMEL Technician

The PMEL Technician applies comprehensive metrology principles to all measuremen...

Location

United States , Vanderberg SFB

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or Equivalent required
Minimum of four (4) years of verifiable positive PMEL or calibration technical experience required
Must satisfy background check criteria and be able to obtain a security clearance
Must be able to provide documentation of equipment and area discipline qualifications
Must be able to provide documentation of a proven excellent quality record as a calibration technician
Experience to include inspecting, troubleshooting, repairing, overhauling, aligning, calibrating, and certifying TMDE, and metrology laboratory working standards required

Job Responsibility

Complete assignments of troubleshooting, aligning, repairing, modifying, calibrating, and certifying TMDE in accordance with requirements of the PWS, TO 00-20-14, AFI 21-113, AFI 21-101 and other applicable directives as assign by PMEL Managers or PMEL Lead Technician
Provide advanced calibration and repair services on electronic, electro-mechanical, physical, dimensional, mechanical, and optical Test Measurement and Diagnostic Equipment (TMDE) in the assigned Precision Measurement Engineering Laboratory (PMEL)
Provide advanced calibration and repair services on specialized 68-degree room Test Measurement and Diagnostic Equipment (TMDE), fiber optic, sound, vibration, illuminance, noise, flow, primary pressure, and Air Force Note Coded TMDE
Captures test readings using common instruments such as oscilloscopes, digital multi-meters, pulse generators, power meters, torque calibrator, temperature, and pressure measurement devices
Utilize TMDE to troubleshoot and repair systems and circuit boards to component level, to include surface-mount technology
Perform daily operations in accordance with established safety and security practices
Perform daily work assignments to ensure QMS goals are met or exceeded
Participates in root cause analysis process and corrective action determination meetings as required
Provide technical guidance and training to other technicians, when required
Interfaces with customers to report and resolve calibration/maintenance issues and limitations

Fulltime

PMEL Technician

The PMEL Technician applies comprehensive metrology principles to all measuremen...

Location

United States , Vanderberg SFB

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or Equivalent required
Minimum of four (4) years of verifiable positive PMEL or calibration technical experience required
Must satisfy background check criteria and be able to obtain a security clearance
Must be able to provide documentation of equipment and area discipline qualifications
Must be able to provide documentation of a proven excellent quality record as a calibration technician
Experience to include inspecting, troubleshooting, repairing, overhauling, aligning, calibrating, and certifying TMDE, and metrology laboratory working standards required

Job Responsibility

Complete assignments of troubleshooting, aligning, repairing, modifying, calibrating, and certifying TMDE in accordance with requirements of the PWS, TO 00-20-14, AFI 21-113, AFI 21-101 and other applicable directives as assign by PMEL Managers or PMEL Lead Technician
Provide advanced calibration and repair services on electronic, electro-mechanical, physical, dimensional, mechanical, and optical Test Measurement and Diagnostic Equipment (TMDE) in the assigned Precision Measurement Engineering Laboratory (PMEL)
Provide advanced calibration and repair services on specialized 68-degree room Test Measurement and Diagnostic Equipment (TMDE), fiber optic, sound, vibration, illuminance, noise, flow, primary pressure, and Air Force Note Coded TMDE
Captures test readings using common instruments such as oscilloscopes, digital multi-meters, pulse generators, power meters, torque calibrator, temperature, and pressure measurement devices
Utilize TMDE to troubleshoot and repair systems and circuit boards to component level, to include surface-mount technology
Perform daily operations in accordance with established safety and security practices
Perform daily work assignments to ensure QMS goals are met or exceeded
Participates in root cause analysis process and corrective action determination meetings as required
Provide technical guidance and training to other technicians, when required
Interfaces with customers to report and resolve calibration/maintenance issues and limitations

Parttime

Select Country

Service Technician Surface Technology

Job Responsibility

Requirements

What we offer

Looking for more opportunities?