Senior Weight Control Engineer Job at Airswift Sweden (Rotterdam)

Professional Senior, Engineering - Mass Properties

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Mississauga

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Bachelor or Master’s degree in mechanical/aerospace engineering or related field
Minimum of 8 years of experience in Mass Properties
Knowledge of Aircraft Configuration, Structures and Systems integration technical requirements
Proficient in Mass Properties Analysis of Structure, Systems and Wiring
Good understanding and experience in supporting to Design and Stress Engineering, Production, Pre-Flight and In-Service
Familiar with Federal Aviation Regulation, Advisory Circulars, Bombardier Manuals and Recommended Practices
Good knowledge of Catia V5 and MS Office (Word, Excel and Power Point)
Energetic person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment
Highly organized, results-oriented, work independently and able to prioritize assignments

Job Responsibility

Engineering support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues and providing Corrective Action solutions involving Engineering
Conduct the Green Aircraft Weight and Balance engineering procedures, large component and parts weighing
Produce Weight and Balance Reports and Loadsheets for Flight Test, C of A and delivery
Provide the Mass Properties Impact to Final Assembly Line and In-Service Support for Program Change Request (PCR), Design Change Proposal (DCP), Request for Change (RFC), Repair Engineering Order (REO), Service Bulletin (SB), Service Request for Product Support Action (SRPSA), Restriction & Special Instruction (RSI), Functional Test Engineering Requirement (FTER), and Modsums
Maintain Aircraft Weight and CG, DCP/PCR and Modsum databases
Maintain and/or Evaluate partner/supplier weight reports to monitor the weight and center of gravity of the aircraft
Review and approve structural and systems layouts, System Definition Drawings (SDD), Installations, Assembly, Detail and Procurement Control Drawings (PCD)
Calculate Weight and CG using engineering documents (Structural, Installation and Detail Drawings, Harness Reports, Wiring and Stick Diagrams) and 3D modeled parts
Generate inertia and distribution of mass properties data for the aircraft and components
Analyze aircraft characteristics such as aircraft buoyancy and fuel migration

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Senior FEA Engineer

We are looking for a Senior FEA Engineer to design, analyze, and test key hardwa...

Location

United States , San Jose

Salary:

150000.00 - 225000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

Expert knowledge of solid mechanics
Expert in setting up and running implicit and explicit finite element analysis models
Experience modeling metals and polymers
Experience with durability analysis methods
Experience working with suppliers to characterize new polymers

Job Responsibility

Define and analyze load cases for our humanoid robot
Analyze full robot stiffness
Create finite element models to analyze falling, overload, durability and day to day operations
Optimize design of parts and structures for minimizing weight and maximizing stiffness
Work with mechanical team to develop FEA workflow and tutorials
Collaborate with mechanical, industrial design and electrical teams to architect the system
Test systems in the real world and compare against finite element models. Pay close attention to modeling of bearing and other OTS components.
Collaborate with controls engineers to determine load profiles
Help define materials (metals, polymers and textiles) for critical robot components

Fulltime

Senior Reinforcement Learning Engineer

Figure is an AI Robotics company developing a general purpose humanoid. Our Huma...

Location

United States , San Jose

Salary:

150000.00 - 400000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

Confident writing production quality code in PyTorch
Familiar with online and offline reinforcement learning algorithms: PPO, SAC, etc.
Experience tuning hyperparameters and cost functions for these RL algorithms
Familiarity with common RL techniques such as: domain randomization, curriculum learning, reward shaping, etc.
Familiarity with general ML evaluation tools such as TensorBoard, Weights&Biases, etc.
Strong mix of industry and research experience, ideally 5-7+ years of experience

Job Responsibility

Develop, train, and deploy reinforcement learning algorithms for locomotion and manipulation tasks
Build simulation infrastructure to support the training of locomotion and manipulation policies for a general purpose humanoid robot at a large scale
Collaborate with the controls team to integrate policies into the existing control stack
Define, test, and evaluate performance metrics for learned policies

Fulltime

Professional Senior, Engineering - Mass Properties

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Mississauga

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Bachelor or Master’s degree in mechanical/aerospace engineering or related field
Minimum of 8 years of experience in Mass Properties
Knowledge of Aircraft Configuration, Structures and Systems integration technical requirements
Proficient in Mass Properties Analysis of Structure, Systems and Wiring
Good understanding and experience in supporting to Design and Stress Engineering, Production, Pre-Flight and In-Service
Familiar with Federal Aviation Regulation, Advisory Circulars, Bombardier Manuals and Recommended Practices
Good knowledge of Catia V5 and MS Office (Word, Excel and Power Point)
Energetic person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment
Highly organized, results-oriented, work independently and able to prioritize assignments

Job Responsibility

Engineering support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues and providing Corrective Action solutions involving Engineering
Conduct the Green Aircraft Weight and Balance engineering procedures, large component and parts weighing
Produce Weight and Balance Reports and Loadsheets for Flight Test, C of A and delivery
Provide the Mass Properties Impact to Final Assembly Line and In-Service Support for Program Change Request (PCR), Design Change Proposal (DCP), Request for Change (RFC), Repair Engineering Order (REO), Service Bulletin (SB), Service Request for Product Support Action (SRPSA), Restriction & Special Instruction (RSI), Functional Test Engineering Requirement (FTER), and Modsums
Maintain Aircraft Weight and CG, DCP/PCR and Modsum databases
Maintain and/or Evaluate partner/supplier weight reports to monitor the weight and center of gravity of the aircraft
Review and approve structural and systems layouts, System Definition Drawings (SDD), Installations, Assembly, Detail and Procurement Control Drawings (PCD)
Calculate Weight and CG using engineering documents (Structural, Installation and Detail Drawings, Harness Reports, Wiring and Stick Diagrams) and 3D modeled parts
Generate inertia and distribution of mass properties data for the aircraft and components
Analyze aircraft characteristics such as aircraft buoyancy and fuel migration

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Senior R&D Systems Engineer – Networked Electronic Warfare

Silvus is seeking a highly skilled and motivated Senior R&D Systems Engineer to ...

Location

United States , Los Angeles

Salary:

140000.00 - 200000.00 USD / Year

Silvus Technologies (International)

Expiration Date

Until further notice

Requirements

Bachelor of Science degree in Systems Engineering, Electrical Engineering, Physics, or a related technical field
Minimum of 5+ years of experience in systems engineering for complex hardware/software systems, with a strong understanding of the V-model, requirements decomposition, and lifecycle management
Proven experience in one or more following domains: Electronic Warfare (EA/ES/EP), Signals Intelligence (SIGINT), Tactical Radios / Wireless Communications (MANET, MIMO, Mesh), or Radar Systems
Hands-on experience with modern systems engineering and requirements tools such as Cameo Systems Modeler (MagicDraw), IBM DOORS / DOORS Next Gen, Jama Connect, or Sparx Enterprise Architect
Security Clearance: Active U.S. Government SECRET clearance or the ability to obtain one within 12 months of hire
Must be a U.S. Citizen due to clients under U.S. government contracts
All employment is contingent upon the successful clearance of a background check and drug test

Job Responsibility

System Architecture & Design: Lead the architectural definition of networked EW systems, decomposing high-level mission requirements into detailed hardware, software, and firmware specifications
Requirements Management: Utilize modern requirements management tools to capture, trace, and maintain system requirements throughout the product lifecycle, ensuring full coverage from customer needs to validation testing
Technical Documentation: Author and maintain critical engineering artifacts, including System Design Descriptions (SDD), Interface Control Documents (ICDs), ConOps, and Test Plans
MBSE Implementation: Apply Model-Based Systems Engineering (MBSE) methodologies to model system behaviors, states, and data flows, ensuring coherency across distributed network nodes
Integration & Test Leadership: Define and oversee system integration strategies
lead hands-on integration events involving RF hardware, embedded software, and network emulators in both lab and field environments
Cross-Functional Collaboration: Serve as the technical bridge between RF, FPGA, Software, and Mechanical engineering teams, facilitating trade studies to balance performance, SWaP (Size, Weight, and Power), and cost
Performance Analysis: Develop simulation models (MATLAB/Python) to predict system performance under realistic channel conditions and validate these models against field test data
Travel Requirements - occasional travel for team meetings

Fulltime

Manager, Remote Operations Center

This position reports to the Director, Renewable Control Center. The Manager, Re...

Location

United States , Scottsdale

Salary:

135000.00 - 160000.00 USD / Year

Clearway Energy

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering or related discipline
Minimum of 2 years experience in Renewable Control Center Operations
Previous Control Center/Dispatch experience preferred
PJM GO Certification required within 6 months of employment
NERC Certification required within 12 months of employment
Able to demonstrate technical knowledge of plant and system processes and experience in operating electrical or SCADA systems
Able to interpret NERC, ERCOT, WECC, CAISO, PJM, and SPP regulations and requirements
Available for 24-hour on-call duty
Knowledge of functional system interactions and must be able to pay attention to critical elements in a complex and regulated environment
Ability to make financial judgements based off real-time power plant equipment analysis and contract related cost weighting risk versus reward

Job Responsibility

Provide direction and supervision to the on-shift Operations team in day-to-day job activities and responsibilities
Oversee and drive continuous improvement in an effort and desire to reduce and eliminate operational issues
Assist in proactively monitoring real-time activity, performance, and operational status of all wind and solar assets to include dispatching of generation, complying with transmission directives and outage coordination/management
Assist the operators in understanding and identification of abnormal operations or alarm conditions that arise during shift and appropriately troubleshoot in a timely fashion
Perform periodic operator log reviews for accuracy and compliance
Perform acceptance testing on RPMC tools and applications used by the on-shift Operations team
Support commissioning activities of new projects
Assist in developing, guiding, and supporting with the onboarding process and training requirements of operations personnel, to include professional development and regulatory obligations
Implementation of processes and procedures to ensure compliance with internal controls, regulatory requirements, and offtaker agreements
Report to Senior management on operational incidents

What we offer

generous PTO
medical, dental & vision care
HSAs with company contributions
health FSAs
dependent daycare FSAs
commuter benefits
relocation
401(k) plan with employer match
a variety of life & accident insurances
fertility programs

Fulltime

Senior DSP/Algorithm Design Engineer

As a Senior DSP/Algorithm Design Engineer within the ERA RF Technologies enginee...

Location

Salary:

Not provided

ERA RF Technologies

Expiration Date

Until further notice

Requirements

BSEE or MSEE Degree in Electrical Engineering with an emphasis in digital signal processing or communication theory
BSEE+10 years or MSEE+8 years of DSP/Algorithm design
In-depth understanding of analytical/mathematical modeling of communication links, ELINT/SIGINT subsystems and related technologies
In-depth expertise on communication theory & signal processing related algorithms design (such as multiple access methods, frequency and timing recovery, signal estimation and detection, spread spectrum techniques, adaptive gain control, interference detection and cancellation, RF impairment estimation and correction, channel estimation, equalization, coding theory, etc.)
Experience with modeling and validation of digital signal processing algorithms in Matlab/Simulink environment
Knowledge of RF transceiver architectures and RF-to-Bits comprehension
Proficiency in written and spoken English
Ability to learn and apply new information quickly on solution proposals
Ability to embrace technological changes and resultant agile workflows
Ability to adapt to multi-disciplinary projects and cross-functional team structures

Job Responsibility

Contribute to defining and identifying system-level specifications, assessing architectural limitations, and engineering constraints
Collaborate with system architects, RF engineers, digital design engineers to understand design requirements and ensure seamless integration of subsystems
Characterization and analysis of system architectures
Conceptual design from requirement analysis
Modelling and simulation of DSP signal chains
Performance validation of designed DSP blocks
Optimization of designed algorithms to meet hardware (FPGA/ASIC/Transceiver etc.) limitations
Adaptation of the algorithms into fixed-point and cycle exact designs for HDL implementations
Support digital design engineering team on VHDL coding, implementation and validation phases
Improve existing algorithms based on information and data collected from field operation on integrated platforms

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

Senior Weight Control Engineer

Airswift Sweden

Location:
Netherlands , Rotterdam

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Weight Control Engineer