Senior Test Design Engineer Job at Zenovo (West Lothian, Edinburgh)

Senior Hardware Design Engineer

We’re looking for a Senior Hardware Design Engineer to lead the design, developm...

Location

United Kingdom , Colchester

Salary:

55000.00 - 70000.00 GBP / Year

Cooper Lomaz

Expiration Date

Until further notice

Requirements

Degree (Bachelor’s or Master’s) in Electronic Engineering, or equivalent industry experience
Strong background in hardware design and development
Skilled in schematic capture and PCB design using Altium Designer
Experience in the test and measurement industry (preferred)
High-speed digital design, RF, power management, and EMI/EMC
Confident debugging using standard lab equipment
Experience working in cross-disciplinary engineering teams
Knowledge of FPGA design (VHDL/Verilog) or microcontroller systems
Understanding of embedded software principles

Job Responsibility

Work with product teams to define technical requirements and design specifications
Lead the design and development of digital, analogue, and RF hardware
Create detailed schematics and PCB layouts using Altium Designer
Select components, run simulations, and perform technical analysis to ensure strong performance
Develop and carry out test plans for prototypes and final products
Debug, validate, and verify hardware using lab equipment such as oscilloscopes, logic analysers, and spectrum analysers
Collaborate closely with software, mechanical, test, NPI, and manufacturing teams
Manage large hardware development projects through the full lifecycle-from concept to end-of-life
Mentor junior engineers and support their technical development
Produce and maintain clear technical documentation

Fulltime

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...

Location

United States , South Jordan, Utah

Salary:

Not provided

Cricut

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
Experience in test system design, metrology instrumentation, and mechanical calibration processes
Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
Excellent analytical, problem-solving, and documentation skills
Strong communication skills and ability to lead cross-functional technical efforts

Job Responsibility

Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
Participate in supplier design reviews and qualification of external test and calibration equipment
Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility

What we offer

competitive Medical, Dental, and Vision coverage
401(k) match
generous PTO
tuition reimbursement
yearly lifestyle stipend
exclusive employee discounts

Fulltime

Senior Test Engineer, HW

We are looking for a Senior Test Engineer, HW to join our technology development...

Location

Finland , Oulu

Salary:

Not provided

TactoTek

Expiration Date

Until further notice

Requirements

BSc/MSc in Electrical Engineering, Electronics, or a related field
Several years of experience in hardware and/or environmental testing within R&D or technology development
Strong hands-on skills and ability to work independently with laboratory setups and test equipment
Solid analytical skills for interpreting test and build data and making fact-based conclusions
Practical experience in troubleshooting and failure analysis
Ability to plan and execute complex test campaigns and report results clearly
Good communication skills in English, both written and verbal
Systematic and detail-oriented way of working

Job Responsibility

Plan, execute, and document component-level and environmental tests for In-mold structural electronics
Design and maintain environmental test setups, including sample and fixture preparation, setup upkeep, and follow-up checks
Analyze and document environmental test results to support technology development and qualification
Prepare build materials, including control plans, stack structures, Kick-off materials, and ERP entries
Act as a gatekeeper to ensure that design and project samples are ready and qualified for testing
Provide build support, perform build result analysis, and conduct build failure investigations
Ensure that the minimum quality requirements for test environments are met and maintained
Analyze and interpret test data to identify trends, deviations, and root causes
Communicate findings clearly and propose actions to improve design robustness and manufacturability
Work closely with electronics, mechanics, materials, and process engineers to troubleshoot and solve technical issues

What we offer

Competitive compensation package
Flexible work environment
Remote-friendly culture
Work-life balance
Opportunity to collaborate with world-leading IMSE experts and globally recognized brands
Employees are empowered to take responsibility for their work
Opportunity to actively shape the evolution of their role

Fulltime

Senior Test Engineer, Propulsion

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

134400.00 - 168000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor or MS degree in mechanical or mechatronics engineering
2+ years of experience with physical testing and analysis of mechanical or electronic systems against detailed requirements
2+ years of direct automation design and build experience (automated testing, manufacturing, robotics, industrial etc.)
Experience leading and driving technical projects to completion
Good understanding of electrical circuit design and power electronics
Experience with Python or NI(LabVIEW, TestStand, or VeriStand)
Experience with electrical test equipment, hand tools, power tools

Job Responsibility

Design and build reliable automated test equipment to conduct functional tests on PCBAs or modules
Work together with Design Engineers, System Engineers, and Reliability Engineers to Identify design critical operating modes and create design validation test plans
Work with test technicians to build validation test setups and execute test plans and teardowns
Investigate device failures to determine root cause and drive product improvements
Identify and plan critical tests to validate new technologies

Fulltime

Senior Operations and Test Engineer

Hermeus is a high-speed aircraft manufacturer focused on the rapid design, build...

Location

United States , Atlanta, GA; Los Angeles, CA

Salary:

138550.00 - 187450.00 USD / Year

Hermeus

Expiration Date

Until further notice

Requirements

Bachelor’s degree in an engineering discipline
3+ years of experience with mechanical, electrical and/or fluid systems
Ability to work long hours and some weekend as needed, to support critical milestones
Ability to lift up to 25 lbs
standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying maybe require to perform the functions of this positions
Ability to travel on short notice to support test campaigns
Must be eligible to pass Air Force background checks

Job Responsibility

Develop and standardize procedures/automation for the checkouts, integration, development testing, and taxi testing of new and flight-proven vehicles, rapidly iterating based on lessons learned
Design software and automation tools to enable autonomous vehicle operations, and to conduct vehicle system testing in ways that reduce complexity
Assist with integration and testing of flight hardware, partnering with and providing direction to highly skilled field technicians and specialists daily
Ensure test and flight readiness by reviewing test results and working with other teams to resolve off-nominal test results, collaborating with engineering staff from other departments and locations on a regular basis
Identify opportunities to improve existing processes and equipment to eliminate small scale production waste
Manage work orders and drive non-conformances into actionable items and systematic improvements

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
End of Year Bonuses
Fully stocked breakrooms
Stock Options

Fulltime

Senior Test Engineer

Join Avaloq’s new, dynamic Platform Engineering team. Our mission is to design a...

Location

Switzerland , Zurich

Salary:

Not provided

Avaloq

Expiration Date

Until further notice

Requirements

5+ years of experience in test automation for distributed or cloud-native systems
Expertise in modern test frameworks (Cypress, Playwright, Selenium, Cucumber, TestNG, JUnit) and BDD practices
Experience testing backend APIs, event-driven architectures, and data pipelines
Familiarity with AWS cloud services (DynamoDB, Lambda, ECS/EKS), at least one other cloud service and Infrastructure-as-Code testing (Terraform, CDK)
Understanding of CI/CD pipelines and DevSecOps principles
Awareness of compliance and security testing for regulated financial systems (PCI DSS, SOC2, GDPR)
Strong communication and collaboration skills, with a proactive approach to problem solving and continuous improvement

Job Responsibility

Design and maintain automated testing frameworks across UI, API, and integration layers using tools like Cypress, Playwright, and Postman
Implement BDD testing practices using tools like Cucumber or SpecFlow to strengthen collaboration between product and engineering
Develop test suites for performance, reliability, and security testing (e.g., JMeter, Gatling, OWASP ZAP)
Integrate automated tests into CI/CD pipelines (GitHub Actions, Jenkins) to enable continuous testing and faster feedback cycles
Partner with SRE, Platform Engineering, and Product teams to embed quality checks in the delivery process from design through deployment
Define AI-enabled test data management, validation and environment strategies to support parallel testing across multiple product teams
Champion quality engineering principles and mentor team members on test design, coverage, and automation best practices

What we offer

Annual bonus
Flexible working
Instant recognition scheme
Access to Udemy for professional and personal learning

Fulltime

Senior Mechanical Design Engineer

Sr. Mechanical Design Engineers at Axon have full design ownership over next gen...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering or equivalent experience
Minimum 7 years of product design experience in high-end consumer electronic products
Proficiency with Creo or similar 3D CAD software
Knowledge in the design of plastic injection molded, stamped metal, die-cast, and machined parts
Familiarity with adhesives and bonded joint design
Experience designing for a high level of dust/water ingress protection
Experience with PCB/PCBA flex circuit and other electro-mechanical integration
Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
Ability to interpret product requirements and translate into quantifiable engineering deliverables
Experience preserving Industrial Design artistic intent in mechanical design implementation

Job Responsibility

Drive innovative product development from conceptualization through manufacturing
Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
Construct and analyze high fidelity proof-of-concept prototypes
Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
Collaborate regularly with both domestic and international stakeholders
Work autonomously and collaboratively in an empowering and fast-paced environment
Hone your engineering expertise in a dynamic learning environment focused on personal and professional development

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
Snacks in our offices

Fulltime

Senior Mechanical Design Engineer

Join Axon and be a Force for Good. At Axon, we’re on a mission to Protect Life. ...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering or equivalent experience
Minimum 7 years of product design experience in high-end consumer electronic products
Proficiency with Creo or similar 3D CAD software
Knowledge in the design of plastic injection molded, stamped metal, die-cast, and machined parts
Familiarity with adhesives and bonded joint design
Experience designing for a high level of dust/water ingress protection
Experience with PCB/PCBA flex circuit and other electro-mechanical integration
Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
Ability to interpret product requirements and translate into quantifiable engineering deliverables
Experience preserving Industrial Design artistic intent in mechanical design implementation

Job Responsibility

Drive innovative product development from conceptualization through manufacturing
Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
Construct and analyze high fidelity proof-of-concept prototypes
Perform detailed mechanical analysis to ensure proper function through FEA, tolerance analysis, testing, and other exploratory means
Collaborate regularly with both domestic and international stakeholders
Work autonomously and collaboratively in an empowering and fast-paced environment
Hone your engineering expertise in a dynamic learning environment focused on personal and professional development

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
Snacks in our offices

Fulltime

Select Country

Senior Test Design Engineer

Job Description

Job Responsibility

Requirements

Looking for more opportunities?