Senior Subsea Structural Engineer Job at Airswift Sweden (Kuala Lumpur)

Senior Structural & Mechanical Integrity Engineer

Senior Structural & Mechanical Integrity Engineer within the Asset Integrity Man...

Location

Salary:

Not provided

James Fisher

Expiration Date

March 20, 2026

Requirements

Degree qualified in Structural or Mechanical Engineering
Chartered Engineer (CEng) or working towards is preferred
Lifting knowledge aligned to LEEA guidance
relevant NDT qualifications desirable
Extensive experience with offshore platforms, offshore wind substations, or marine structures
Strong understanding of corrosion protection, structural assessment and mechanical systems – including pressurised systems, HVAC, lifting equipment, and rotating machinery
Familiarity with FEA and structural modelling tools (e.g., ANSYS, ABAQUS, SESAM) is desirable
Experienced in interpreting ROV data, bathymetric surveys, and subsea structural interface inspection datasets
Familiarity with offshore standards, integrity management frameworks, and risk-based methodologies
GWO certifications and Offshore Medical (or willingness to obtain) for offshore access (if desired)

Job Responsibility

Act as the technical authority for the structural and mechanical integrity of offshore transmission and renewable energy assets
Provide lifecycle engineering assurance across offshore substations, foundations, primary and secondary steelwork, mechanical systems, corrosion protection, lifting equipment, and subsea interfaces
Define integrity strategies, assure inspection and assessment activities, evaluate degradation and fatigue mechanisms, and lead risk-based decisions that protect safety, availability, and OFTO revenue
Assess the condition of offshore structures including primary and secondary steel, decks, gratings, handrails, ladders, W2W structures, and access systems
Review foundations, jackets, and monopiles using inspection data, ROV footage, bathymetry, scour surveys, and structural assessments
Assess J-tubes, bell mouths, clamps, bend restrictors, and cable interface structures
Review cable protection systems (CPS) and identify exposure, damage mechanisms, and structural vulnerabilities
Provide integrity oversight for HVAC systems, cranes, davits, mechanical handling systems, fire systems, and auxiliary plant
Review mechanical degradation, corrosion mechanisms, coating failures, and fatigue-related defects
define remediation

What we offer

Competitive benefits tailored to the division
Opportunities for career growth and visibility across the organisation
A supportive, inclusive culture that values your ideas and contributions
Work that truly makes a difference in safety, innovation, and global capability

Fulltime

New

Senior Project Engineer

The Senior Operations Engineer (Marine) may supervise several project personnel ...

Location

United States , Houston

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering, construction, or project management
5-8 years of engineering discipline experience with a major contractor or consultant in an office, primarily performing detail engineering
Good knowledge of discipline design techniques, analysis methods, and general workflow
Preferably a registered professional engineer or member of a professional engineering society
Bachelor’s degree in Mechanical, Civil, Ocean, or Subsea Engineering (preferred)
Minimum 5 years of subsea installation engineering experience
AutoCAD proficiency is required
Offshore safety certifications such as BOSIET/FOET and OGUK medical
Experience working with EPC contractors and major oil and gas operators
Proven hands-on experience supporting air diving operations

Job Responsibility

Coordinate and review inputs from the various Engineering disciplines, functional departments, and sub-contractors contributing to the Engineering portion of a project
Coordinate and ensure the generation of deliverables, reports, and procedures required
Support management of the Engineering portion of the project as directed
Use expertise and project experience to solve complex problems by identifying innovative solutions
Manage time to meet objectives
forecast and plan resource requirements
Assist the Project Engineering Manager in planning, organizing, coordinating, and controlling small projects by establishing policies, procedures, systems, and requirements
Act as a liaison between the Customer and Project Engineering Manager and Engineering Team, including third-party agencies and subcontractors
Assist in the preparation and implementation of the Engineering Project Execution Plan (PEP)
Assist in the preparation of the work-sharing Interface Plan & Scope Split Matrix

Fulltime

Graduate Engineer

As a Graduate Engineer, you will embark on an exciting career in the subsea indu...

Location

United Arab Emirates , Dubai

Salary:

Not provided

Fugro

Expiration Date

Until further notice

Requirements

Must be a UAE national with a Family Book
Bachelor’s or Master’s degree in Mechanical Engineering, Structural Engineering, Electrical Engineering, Naval Architecture, or a related field
Entry-level to 2 years of experience in engineering, preferably in mechanical, structural, electrical, or naval architecture
Basic understanding of engineering design, control systems, sensor integration, and/or underwater vehicle dynamics
Proficiency in CAD software (e.g., SolidWorks, AutoCAD) is a plus
Strong problem-solving skills and a willingness to learn and grow in a fast-paced, dynamic environment
Fluency in English

Job Responsibility

Assist in the design and development of ROV and USV systems, including mechanical structures, propulsion systems, control systems, and sensor integration
Assist in installation of ROV Launch and Recovery Systems and other structures on offshore vessels
Assist in the review of fabrication and installation drawings and engineering design reports
Assist in the development and execution of test plans to validate system performance and reliability under various operating conditions and environmental factors
Participate in testing activities and provide support in troubleshooting components and subsystems, under the guidance of senior engineers
Provide assistance to internal teams and external stakeholders, including sales, marketing, and customer support, by addressing engineering queries and providing insights into product capabilities and applications
Support the generation of technical documentation, including engineering drawings, specifications, test reports, and user manuals, to ensure comprehensive documentation of design and development activities
Stay informed about emerging technologies and industry trends in underwater robotics, actively seeking opportunities to expand your knowledge and skillset
Participate in training programs and professional development activities to enhance your understanding of ROV and USV systems engineering principles and practices

What we offer

Positive work environment
Great opportunities to stretch and develop yourself
Freedom to grow faster

Fulltime

Senior Geotechnical Engineer

Sr. Geotechnical Engineer, Jakarta based.

Location

Indonesia , Jakarta

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Well versed in design of onshore/offshore/marine structures, shallow and deep foundations, analyses, related engineering assessments, calculations, procedures
Sound knowledge and understanding of geotechnical investigations, testings, review of Factual/Interpretative/Design reports
Working knowledge in foundation designs and assessments for offshore, jetty, quayside structures, different types of piled foundations (axially loaded, laterally loaded, short/long pile etc.), pile driveability, jackup leg penetration analysis, leg extraction analysis, generation of soil curves (p-y, t-z, q-z), settlement analysis, liquefaction analysis, ground improvements, upheaval buckling, on-bottom stability, trenchability etc.
Knowledge in relevant computer software pertaining to geotechnical design and analysis
Familiarity with industry standards and design codes.
Knowledge in relevant softwares like Plaxis, LPile, OPile, GRL Weap

Job Responsibility

Take a leading role in the geotechnical engineering and analysis of projects in the design office
Responsible for development of the new team for civil/marine/offshore foundation designs/assessments
Assisting and preparation of technical and commercial proposals for relevant enquiries
Preparation of specification, method statements, design coordination, coordination with clients/subcontractors
Coordinate and liaise with a team of engineers. Liaise with other disciplines, draftsmen for preparation of drawings for the design and analysis performed.
QC checks of engineering deliverables
Attend meetings, co-ordinate with HO/clients for successful completion of projects
Reporting to Division Manager
Ready to travel, attend site visits and surveys
Expected types of jobs include design and assessment of foundation/geotechnical aspects related to offshore jacket platforms, marine jetties, quaysides, jackup leg penetration assessments, subsea pipelines etc.

Fulltime

New

Senior Pipeline Engineer

The Senior Pipeline Engineer uses best practices and knowledge of internal or ex...

Location

Australia , Perth

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

8-15 years of experience in Oil and Gas with a major contractor or consultant predominantly performing detail design
Bachelor’s Degree in Engineering (Master’s degree is preferred)
Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable
Preferably Registered Professional Engineer or member of professional engineering society as applicable
Seasoned knowledge of engineering standards and specifications
Good knowledge of engineering software
Able to work independently
Good working knowledge of English, both oral and written
HSE, TQM and cost-conscious
Good organizer, motivator, and supervisor

Job Responsibility

Perform the engineering for onshore and offshore pipeline systems
Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards
Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
Clearly communicate and explain complex issues and work to establish understanding
Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements
Identify changes to scope and promptly raise change notifications
Assist in the preparation of estimates for bid proposals
Raise technical queries to obtain missing information, clarify work scope
Prepare Discipline engineering design basis, philosophies, and technical specifications
Participate in finalizing deliverables lists and deliverables

What we offer

Competitive Salaries
9 Day Fortnight – every second Friday off
Income Protection Insurance
Life insurance
14 weeks primary / 2 weeks secondary carer paid parental leave
Competitive offshore and onshore allowances
Robust Talent and Organisation Development programs
Discounted gym membership
Education Assistance Program
Flexible Work Arrangements

Fulltime

Senior Commissioning Engineer – Subsea & Electrical (Power Cables)

QatarEnergy is seeking an experienced Senior Commissioning Engineer – Subsea & E...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electronics & Communications Engineering or related discipline
Minimum 15 years’ experience in the Oil & Gas industry
At least 10 years in telecom commissioning for onshore/offshore facilities
Strong FEED and EPIC experience with proven capability to review, comment, and approve contractor deliverables
In-depth technical expertise in offshore telecom systems (CCTV, radio, PA/GA, IP telephony, network infrastructure, NMS, structured cabling, AIS, ACS)
Demonstrated ability to coordinate and lead complex commissioning activities under pressure
HV qualifications including: City & Guilds HV AP/SAP authorization (or equivalent)
NFPA?70E / OSHA arc?flash training
Experience with IEC?60840 test/commissioning for 132?kV cables
Familiarity with fiber optic testing (OTDR, attenuation)

Job Responsibility

Review, comment, and approve contractor engineering deliverables including design documents, commissioning procedures, system architecture drawings, test plans, and as?built documentation
Provide technical oversight during FEED and EPIC phases to ensure design compliance with project requirements, international standards, and operability targets
Ensure all commissioning requirements (testing, tools, spares, documentation, procedures) are correctly implemented early in the project lifecycle
Lead and execute commissioning activities for a wide range of offshore telecom systems
Ensure safe and compliant pre?commissioning/commissioning of 132?kV subsea and onshore power cable systems
Plan, organize, and execute pre?commissioning and commissioning activities in accordance with project schedules
Lead multicultural teams (contractors, vendors, technicians, offshore personnel) during field execution
Ensure technical issues are resolved promptly to avoid schedule delays, providing on?site troubleshooting and engineering support
Ensure readiness for start?up, including validation of system functionality, interfaces, and integration with subsea and topside systems
Champion QatarEnergy HSE standards, ensuring safe execution of all work activities

Fulltime

Qa/qc Coordinator

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
Good leadership and communication skills
Ability to work on projects in a complex, multicultural environment
Proficient in MS Office, database management, spreadsheets, and email communication
Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation

Job Responsibility

Report quality status daily to the Senior Quality Engineer
Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
review inspection reports
Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements

New

Hr Manager

Subsea Global Solutions is seeking to hire a seasoned, hands-on Human Resources ...

Location

United States , Miami

Salary:

Not provided

Subsea Global Solutions

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Human Resources, Business Administration, or related field (Master’s preferred)
8–12 years progressive HR experience. Minimum 5 years in an HR leadership role
Experience in industrial, marine, oil & gas, construction, or field-service environments is strongly preferred
Experience in multi-state and international workforce management
Strong knowledge of U.S. employment law and compliance frameworks
Demonstrated experience implementing HR systems or digital transformation initiatives
Experience in a private equity-backed environment preferred
Core Competencies: Strategic Workforce Planning
Labor Cost Management
Compliance & Risk Mitigation

Job Responsibility

Develop and implement HR policies, procedures, and an employee handbook aligned with company values, industry standards, and legal requirements
Support leadership in aligning workforce planning and organizational structure with growth and business strategy
Ensure compliance with federal, state, and local employment laws (FLSA, FMLA, OSHA, EEO, etc.), as well as international regulations where Subsea operates
Partner closely with Operations to lead global workforce planning and scheduling across the U.S., Canada, Caribbean, Belgium, Busan, Singapore, and Sydney
Implement standardized workforce management tools (ADP, UKG or similar)
Analyze overtime drivers and implement corrective actions
Improve labor utilization while maintaining compliance and operational readiness
Align staffing allocation with commercial pipeline and job execution forecasts
Lead full-cycle recruitment across administrative, operational, and highly specialized marine roles
Build sustainable recruiting pipelines for divers, project managers, marine engineers, and technical staff

Fulltime

Senior Subsea Structural Engineer

Airswift Sweden

Location:
Malaysia , Kuala Lumpur

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Subsea Structural Engineer