CrawlJobs Logo
CommScope Logo CommScope · IT - Software Development

Senior Staff Engineer, NPI

United States, Shakopee Employment contract · Job Posted June 09, 2026
Apply Position
Job Link Share

Job Description

Senior Engineer, Global NPI, provides technical leadership and execution oversight for the development, industrialization, and launch of next‑generation fiber optic products. This role drives end‑to‑end manufacturing readiness by integrating product design, optical test processes, automation, and global production strategies. Responsible for supporting successful product industrialization and transition to production by driving process consistency, yield performance, and manufacturing readiness across sites. Contributes to cross-functional alignment and ensures reliable execution of NPI objectives. The position leads cross-functional efforts to ensure scalable, high-yield, and cost-efficient manufacturing solutions, while supporting rapid deployment across multiple production sites. The Senior Engineer plays a critical role in advancing test capabilities, improving process robustness, and accelerating new product introductions aligned with business growth objectives.

Job Responsibility

  • Lead all phases of New Product Introduction (NPI), from concept through production launch
  • Define manufacturing strategies to ensure scalability, yield, and cost targets are achieved
  • Ensure alignment between product design and manufacturing through advanced DFM guidance
  • Drives technical leadership in optical test, interferometry, and continuity verification
  • develops and implements advanced processes leveraging emerging technologies and external partners, ensuring scalable deployment across sites without compromising quality or customer performance
  • Leads functional business analysis for Fiber Barcode (FBC) systems
  • defines software requirements and strategy to ensure product compliance, drives development activities, and validates system performance for robustness and reliability
  • Provides direction across all NPI phases, ensuring execution aligns with PDP requirements, procedures, and regulatory standards
  • coordinates with R&D and PLM on schedules, resources, and capital planning while driving process capability, yield, and cost performance through PFMEA, VSM, and throughput analysis
  • Specifies and leads implementation of automation equipment for fiber manufacturing systems, including concept, design, build coordination (internal and external), validation, and operator readiness
  • ensures successful deployment and transfer across sites while maintaining quality and customer requirements
  • Leads cross-functional teams including Manufacturing Engineers, Technicians, and Automation groups to achieve project goals
  • defines and executes project plans, schedules, and budgets to ensure delivery against performance and cost targets

Requirements

  • Bachelor's Degree in related curriculum such as Engineering with 8-10 years of work experience in relevant or related field
  • Proficient in FBC, SAP, Lean Six Sigma, SharePoint
CommScope - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Senior Staff Engineer, NPI

8 matching positions

Senior Staff Packaging Engineer

Lead technology development and supply chain bring up of advanced substrate tech...
Location
Location
Japan , Tokyo
Salary
Salary:
Not provided
amd.com Logo
AMD
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Five plus years of experience leading cross functional teams to achieve technology certification, yield/cost reduction initiatives, equipment set up
  • Proven record of communicating complex technical challenges to executive level/management
  • Prior experience working with international teams across various time zones
  • BS/MS/PhD in solid state physics, Chemistry, Material science, Chemical engineering or equivalent
Job Responsibility
Job Responsibility
  • Define advanced substrate and board technology roadmap across pitch scaling, power delivery, signal integrity and cost vectors
  • Partner with AMD architects, designers, and product owners to define high yielding, cost effective substrate solutions which meet product requirements
  • Select development partners to bring into AMD supply chain to enable industry leading substrate and PCB technology building blocks
  • Partner with product, quality and manufacturing engineering teams to meet various milestones for manufacturability, yield and reliability from concept through NPI
  • Qualify package substrates of new products meeting cost and yield targets
Read More
Arrow Right

Senior Staff Mechanical Engineer

Atlas is our next-generation humanoid robot, designed to perform useful work in ...
Location
Location
United States , Waltham
Salary
Salary:
130000.00 - 190000.00 USD / Year
bostondynamics.com Logo
Boston Dynamics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • B.S. in Mechanical Engineering or related field and 8+ years of relevant experience
  • M.S. in Mechanical Engineering or related field with 6+ years of experience
  • PhD with 3+ years of experience
  • Experience designing and delivering hardware from concept through validation
  • Demonstrated ability to take ownership of mechanical designs in multidisciplinary projects
  • Advanced CAD user (Catia, NX, Solidworks, etc.), including part and assembly level FEA and topology optimization
  • A working knowledge of ASME drafting standards including GD&T, (Y14.5-2018)
  • Transitioning early designs to products [NPI, EVT, DVT]
  • Soft skills: creative and team first thinking, excellent attention to detail, strong technical communication, technical mentorship
  • A brief portfolio of images with short descriptions of recent work is required via either web-link or PDF.
Job Responsibility
Job Responsibility
  • Contribute to the design of key gripper subsystems, from early concepts through to production-ready hardware
  • Develop and analyze mechanisms that balance dexterity, payload, and reliability under demanding use cases
  • Apply engineering fundamentals across materials, tribology, thermals, and tolerance stack-ups to achieve robust, repeatable performance
  • Use CAD (3DX/Catia) and analysis tools to model, simulate, and validate designs
  • Collaborate with electrical, controls, and manufacturing engineers to ensure clean integration and testability
  • Support prototyping, bring-up, and issue resolution throughout the product lifecycle.
What we offer
What we offer
  • medical
  • dental
  • vision
  • 401(k)
  • paid time off
  • annual bonus structure
  • Fulltime
Read More
Arrow Right

Senior Staff Advanced Quality Engineer

ALSO is seeking a highly motivated Senior Staff Advanced Quality Engineer (AQE) ...
Location
Location
United States , Palo Alto
Salary
Salary:
242000.00 - 275000.00 USD / Year
ridealso.com Logo
ALSO
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Mechatronics, Electronics, or a relevant technical field
  • 10+ years of relevant experience in Quality Engineering, R&D, or NPI in a hardware/manufacturing environment
  • Deep specialized knowledge in one or more of the following: Electronics: Electronic product manufacturing processes including SMT, PCB fabrication, PCBA assembly, ICT, and FATP
  • Harnessing: Wire harness manufacturing (crimping, ultrasonic welding, molding) and cable assembly
  • System Integration: Functional testing (FCT), burn-in testing strategies, and high-voltage (Hi-Pot) safety testing
  • Expert ability to read and interpret electrical schematics and wiring diagrams
  • Deep knowledge of APQP and PPAP methodologies
  • Proficiency with Arena PLM (or similar), Jira, and Microsoft/Google suites
  • A self-starter with a process-oriented mindset, able to influence without authority and execute in an extremely fast-paced environment
Job Responsibility
Job Responsibility
  • Drive Upstream Quality: Partner deeply with Electrical Design Engineers to engineer robustness into PCBAs and electrical systems, driving 'Design for Test' (DFT) and 'Design for Manufacturability' (DFM)
  • Risk Management: Lead precision execution of DFMEA for electrical subsystems, defining critical-to-quality features for in-circuit and functional testing
  • NPI Execution: Own the design quality process from start to finish, implementing Safe Launch Plans and Master Control Plans during the New Product Introduction (NPI) phase
  • Technical Problem Solving: Lead failure analysis and root cause investigation for electrical failures (component level and system level) in test or development environments
  • Cross-Functional Leadership: Act as the liaison between R&D in Palo Alto and overseas manufacturing partners, ensuring electrical design intent is perfectly translated into production
What we offer
What we offer
  • Robust health coverage. Excellent health, dental and vision insurance covered up to 100% by ALSO with FSA & HSA options
  • One Medical membership and dedicated insurance advocates
  • Rich fertility and family building benefits with Progyny
  • Flexible time off
  • 401(k) match
  • Fulltime
Read More
Arrow Right

Senior Staff Product Quality Engineer

As a Senior Staff Product Quality Engineer at Boston Dynamics, you will join our...
Location
Location
United States , Waltham
Salary
Salary:
114195.00 - 157108.00 USD / Year
bostondynamics.com Logo
Boston Dynamics
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Electrical, Industrial Engineering or other Engineering discipline
  • 6+ years of progressively responsible experience in manufacturing, quality assurance or engineering, including project leadership in high-tech environments
  • Experience in high-tech manufacturing environments where a wide range of components including PCBAs, electronics, precision machined parts, castings, injection molded plastic parts, optics, and actuators are assembled
  • Ability to read and interpret engineering drawings and convert them into the quality control plans
  • Ability to execute product and process qualifications
  • Experience understanding product issues and how to adequately get them resolved
  • Experience with creating and approving change orders associated with product, procedures and BOM
  • Excellent written and verbal communication skills, with experience presenting technical content to engineering, regulatory, and executive stakeholders
  • Able to translate complex quality data into actionable insights that influence product and process decisions
Job Responsibility
Job Responsibility
  • Lead and execute the product quality function throughout the product development and new product introduction (NPI) process
  • Lead resolution of product quality issues at all stages of the product lifecycle, from prototype to sustaining and across multiple disciplines of the business (including design, supply chain, production and service)
  • Lead root cause, corrective action and preventive action investigations cross functionally
  • Collaborate with Design Engineers, Supplier Quality Engineers, Test Engineers and the Operations Team to ensure that quality standards are met
  • Lead, measure and identify opportunities for improvement in first pass yield (FPY) and other key performance indicators (KPIs)
  • Plan and lead process qualifications generating clear and concise plans and reports as a result of new product releases and sustaining change
  • Ensure processes implemented adhere to quality requirements and risks are identified and communicated where nonconformances exist
  • Provide support to the MRB process to ensure effective root cause/corrective action and prompt and accurate disposition for nonconforming material
  • Implement methods to inspect and evaluate the reliability of manufacturing processes, products and production equipment. Continually improve these methods through data analysis and business needs
  • Support and lead audits (internal, customer, third party) to help improve our Quality Management System, as necessary
What we offer
What we offer
  • medical, dental vision, 401(k), paid time off and a annual bonus structure
  • Fulltime
Read More
Arrow Right

Senior Project Engineer

Join Crusoe as a Senior Project Engineer to lead the strategic greenfield startu...
Location
Location
United States , Arvada
Salary
Salary:
140000.00 - 161000.00 USD / Year
crusoe.ai Logo
Crusoe
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering
  • 7+ years of experience in engineering or manufacturing, with a proven track record in greenfield plant startups, heavy equipment implementation, or high-volume assembly
  • Demonstrated ability to lead engineering initiatives, manage project portfolios, and guide teams through complex technical challenges
  • Expert proficiency with 3D modeling software (SketchUp) for factory layout planning and fixture design
  • extensive experience using ERP/MRP software at a strategic level
  • Expert knowledge of relevant building/safety codes and standards with the ability to apply them to facility infrastructure
  • Exceptional analytical ability for decision-making and a positive track record of seeing complicated, long-term projects through to completion
Job Responsibility
Job Responsibility
  • Direct the strategic planning and execution of manufacturing floor layouts, equipment installation, and utility infrastructure to scale from zero to high-volume production
  • Own the scope, schedule, and budget for major Capital Expenditure (CapEx) projects
  • manage equipment procurement, negotiate with vendors, and oversee Factory/Site Acceptance Testing (FAT/SAT)
  • Serve as the Subject Matter Expert (SME) for selecting and commissioning advanced manufacturing machinery
  • Lead New Product Introduction (NPI) initiatives on the floor, translating complex 'production-ready' 3D models into scalable, repeatable assembly processes
  • Initiate and direct Design for Manufacturability and Assembly (DFMA) reviews with design teams to drive cost reduction and efficiency
  • Create and enforce high-level standards for manufacturing documentation (SOPs, Work Instructions), ensuring strict compliance with regulatory codes and safety standards
  • Provide expert technical guidance and mentorship to junior project engineers and manufacturing staff
  • Independently lead the implementation of complex Engineering Change Orders (ECOs), analyzing broad impacts on inventory, tooling, and line balance
  • Drive strategic collaboration with Sales, Project Management, and Supply Chain to resolve high-level production challenges
What we offer
What we offer
  • Restricted Stock Units
  • Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
  • Employer contributions to HSA accounts
  • Paid Parental Leave
  • Paid life insurance, short-term and long-term disability
  • Teladoc
  • 401(k) with a 100% match up to 4% of salary
  • Generous paid time off and holiday schedule
  • Cell phone reimbursement
  • Tuition reimbursement
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Systems Engineer: Automation

HOW MIGHT YOU DEFY IMAGINATION? If you feel like you're part of something bigger...
Location
Location
United States , Holly Springs
Salary
Salary:
Not provided
amgen.com Logo
Amgen
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Basic Qualifications: High School Diploma / GED and 10 years of Engineering experience OR Associate's Degree and 8 years of Engineering experience OR Bachelor's Degree and 4 years of Engineering experience OR Master's Degree and 2 years of Engineering experience OR Doctorate Degree
  • Preferred Qualifications: Degree in Electrical Engineering, Computer Science, Chemical Engineering, Biotech Engineering, or related field
  • Direct knowledge of Automation System design, experience in process control engineering and troubleshooting with GMP biopharmaceutical production facility equipment/systems automation such as media, harvest, bioreactors, solution prep, single use mixing vessels, chromatography, TFFL/TFFX, viral filtration, viral inactivation, UF/DF, depth filtration, drug substance fill, CIP/SIP, clean utilities, and integrating various OEM automation software
  • Extensive understanding and background in programming, design, installation and lifecycle management of manufacturing process controls, automation and field instrumentation technologies
  • Experience with Emerson DeltaV DCS system, Process Control Network design including network segregation, virtual infrastructure design and implementation, and ability to perform advanced troubleshooting activities, system integration using OPC, Foundation Fieldbus, Profibus, and DeviceNet technologies. Experience with DeltaV Live is preferred
  • Ability to interpret and apply GAMPs and GMPs and familiarity with documentation in a highly regulated environment with requirements such as 21 CFR Part 11, ASTM 2500, S88, and S95
  • Experience in Capital Project Lifecycle Management: Conceptual Design, Scope and cost estimate development, business case development, detailed design, engineering and validation documentation and project execution
  • Demonstrated hands-on experience in developing process control strategies for New Product Introduction and New Technology Deployment for Drug Substance Plant Operations
  • Demonstrated experience with continuous improvements resulting in enhanced safety, system reliability, and productivity (e.g. cycle times, and reduced plant utilities usage etc.) related to Drug Substance Plant Operations
  • The ideal individual must be a self-directed team player ready to mentor and develop engineering staff and embrace a team-based culture that relies on collaboration for effective decision-making
Job Responsibility
Job Responsibility
  • Develop and maintain the process control system on Emerson DeltaV distributed control system (DCS)
  • Work with process subject matter experts (SMEs) to understand key process requirements and transform them into digital automated solutions
  • Collaborate with business partners to understand how automation can improve workflow and productivity
  • Synthesize requirements from clients, customers or end-users to develop the best automation solutions
  • Provide clear documentation for delivered solutions and processes
  • work closely with QA partners while supporting computerized systems validation processes in a GxP environment
  • Maintain Data Integrity Assessments with the current Amgen and Industry standards
  • Build the business processes to support the project scope in alignment with project timelines
  • Develop detailed specification and engineering policies and procedures that affect multiple organizational units
  • Support commissioning and qualification efforts including Automation Installation Verification/Automation Check Out (IV/ACO) in a fast-paced environment
What we offer
What we offer
  • Comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts
  • A discretionary annual bonus program, or for field sales representatives, a sales-based incentive plan
  • Stock-based long-term incentives
  • Award-winning time-off plans and bi-annual company-wide shutdowns
  • Flexible work models, including remote work arrangements, where possible
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Systems Engineer: Automation

Be part of Amgen's newest and most advanced drug substance manufacturing plant. ...
Location
Location
United States , Holly Springs
Salary
Salary:
147421.00 - 177467.00 USD / Year
amgen.com Logo
Amgen
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma / GED and 10 years of Engineering experience
  • Associate’s Degree and 8 years of Engineering experience
  • Bachelor’s Degree and 4 years of Engineering experience
  • Master’s Degree and 2 years of Engineering experience
  • Doctorate Degree
  • Degree in Electrical Engineering, Computer Science, Chemical Engineering, Biotech Engineering, or related field
  • Direct knowledge of Automation System design, experience in process control engineering and troubleshooting with GMP biopharmaceutical production facility equipment/systems automation
  • Extensive understanding and background in programming, design, installation and lifecycle management of manufacturing process controls, automation and field instrumentation technologies
  • Experience with Emerson DeltaV DCS system, Process Control Network design including network segregation, virtual infrastructure design and implementation, and ability to perform sophisticated troubleshooting activities, system integration using OPC, Foundation Fieldbus, Profibus, and DeviceNet technologies
  • Ability to interpret and apply GAMPs and GMPs and familiarity with documentation in a highly regulated environment with requirements such as 21 CFR Part 11, ASTM 2500, S88, and S95
Job Responsibility
Job Responsibility
  • Provide automation technical leadership to a group of automation engineers
  • Work hand in hand with the capital project team to deliver robust process automation systems to operate the new plant
  • Develop and maintain the process control system on Emerson DeltaV distributed control system (DCS)
  • Work with process subject matter experts (SMEs) to understand key process requirements and transform them into digital automated solutions
  • Collaborate with business partners to understand how automation can improve workflow and productivity
  • Synthesize requirements from clients, customers or end-users to develop the best automation solutions
  • Provide clear documentation for delivered solutions and processes
  • work closely with QA partners while supporting computerized systems validation processes in a GxP environment
  • Maintain Data Integrity Assessments with the current Amgen and Industry standards
  • Build the business processes to support the project scope in alignment with project timelines
What we offer
What we offer
  • Competitive and comprehensive Total Rewards Plans that are aligned with local industry standards
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Systems Engineer: Automation - PLC

Be part of Amgen's newest and most advanced drug substance manufacturing plant. ...
Location
Location
United States , Holly Springs
Salary
Salary:
147421.00 - 177467.00 USD / Year
amgen.com Logo
Amgen
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma / GED and 10 years of Engineering experience
  • Associate’s Degree and 8 years of Engineering experience
  • Bachelor’s Degree and 4 years of Engineering experience
  • Master’s Degree and 2 years of Engineering experience
  • Doctorate Degree
  • Degree in Electrical Engineering or Computer Science, Chemical Engineering, or Biotech Engineering
  • Direct knowledge of PLC design, experience in controls engineering and troubleshooting with GMP biopharmaceutical production facility and utility equipment/systems automation
  • Extensive understanding and background in programming, design, installation, and lifecycle management of standalone controls, PLC, and field device/instrumentation technologies
  • Experience with Rockwell industrial automation hardware and systems, ability to perform sophisticated troubleshooting activities, System Integration using OPC, Foundation Fieldbus, Profibus, and DeviceNet technologies
  • Ability to interpret and apply GAMPs and GMPs and familiarity with documentation in a highly regulated environment with requirements such as 21 CFR Part 11, ASTM 2500, S88, and S95
Job Responsibility
Job Responsibility
  • Provide automation technical leadership to a group of automation engineers who are responsible for building and maintaining various automation systems and platforms that support the GMP Drug Substance Plant Operations
  • Work hand in hand with the capital project team to deliver robust automation systems to operate the new plant utility and standalone systems
  • Develop and maintain automation solutions utilizing various PLC's such as Allen Bradley, Siemens, etc. and integration with the Emerson DeltaV system
  • Develop and maintain Supervisory Control and Data Acquisition system (SCADA), Trailblazer reporting system, and equipment PLC’s and interface hardware
  • Lead and support standalone system implementation and start-up, participate and provide technical guidance in the control panel / Human Machine Interfaces (HMI) layout and design including power distribution, grounding requirements, I/O assignments, etc
  • Work with process subject matter experts (SMEs) to understand key process requirements and transform them into digital automated solutions
  • Lead in continuous improvement and innovation initiatives for efficient operation and sustainability improvements of standalone systems
  • Collaborate with business partners to understand how standalone systems can improve workflow and productivity. Synthesize requirements from clients, customers, or end-users to develop the best automation solutions
  • Provide clear documentation for delivered solutions and processes
  • work closely with QA partners while supporting computerized systems validation processes in a GxP environment. Maintain Data Integrity Assessments with the current Amgen and Industry standards
What we offer
What we offer
  • Competitive and comprehensive Total Rewards Plans that are aligned with local industry standards
  • Fulltime
Read More
Arrow Right