Senior Space Electronics Hardware Engineer Job at NewSpace Technical (Berlin)

Senior Electronics Hardware Engineer

As a Senior Hardware Engineer, you will engage with an experienced cross-discipl...

Location

New Zealand

Salary:

Not provided

Herbruck Poultry Ranch

Expiration Date

Until further notice

Requirements

Solid understanding of fundamental circuit design and discrete electronic components
Critical thinking and exceptional debugging and reasoning skills
Design and clear understanding of DC/DC switch mode power supplies and topologies
A good understanding of magnetic principles
Understanding of MCU, LCD, memories and sensor devices
EMC mitigation, cause and effect
Understanding of Wifi, BT, FPGA and touch screen technologies
Strong problem solving and debugging skills with a solid understanding of core engineering principles, and analytical techniques is required
Experience with high-speed interfaces (ADC/DAC, Gigabit Ethernet, HDMI, e/DP, USB3, PCIe, MIPI, SERDES)
Experience with DFx (Design for Cost, Test, Manufacturing)

Job Responsibility

Design world-class hardware, and, if applicable, software/firmware
Broad cross-functional engineering influence with an emphasis on delighting customers with innovation in the consumer electronics space
Complete technical ownership for the programs
Lead/participate in electronic hardware design reviews
Contribute to all aspects of technology readiness including manufacturability
Assist with technical Research and Proof of Concept phases

What we offer

Competitive pension plan with company match
health benefits
paid time off
a robust Wellness Program

Fulltime

Senior Space Electronics Engineer

Senior Electronics Engineer – Space (Berlin). Our client, a fast-growing space t...

Location

Germany , Berlin

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

BSc in Electrical Engineering with 7+ years experience (or MSc/PhD with 5+)
Experience with space hardware electrical design and qualification campaigns
Strong background in power and data systems
Experience with spacecraft C&DH, high-speed signalling, power electronics, EMC/EMI, and grounding
Ability to translate system requirements into robust electrical designs

Job Responsibility

Lead electrical, data, power, and avionics development for a space LiDAR payload
Adapt existing LEO LiDAR electrical designs for non-LEO missions
Design FPGA-based systems and associated peripherals (memory, ADC/DAC, transceivers)
Develop payload and LiDAR timing systems (laser/camera synchronisation and UTC)
Design power regulation and distribution architectures
Support flatsat and flight hardware build, test, and space qualification
Identify and mitigate electrical and radiation-related design risks
Produce requirements, test plans/reports, and design review material (PDR, CDR, etc.)

Fulltime

Principal Hardware / Electronics Engineer

Are you a senior engineer ready to own high-stakes designs that power the future...

Location

United States , Austin

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

Bachelor’s degree or higher in Electrical Engineering
9+ years of experience in electronics design, analysis, and test
Proven track record of delivering complex board-level electronics through production
Expertise in high-reliability space or defense hardware, including derating, WCA, and thermal constraints
Advanced proficiency in PCB layout, manufacturing, and HDI stackup design
Strong background with SI/PI simulation tools (e.g., SIwave, ADS SIPro, Hyperlynx)
Extensive lab experience with bring-up, verification, and specialized equipment
Strong knowledge of adjacent disciplines (software, mechanical) to guide system design
Expert-level proficiency in Altium and other electronics design tools
Excellent written and verbal communication skills

Job Responsibility

Own full-stack design of complex electronics modules and systems from concept to production
Lead teams of engineers developing advanced digital, RF, and power electronics hardware
Provide subject matter expertise across programs, guiding technical rigor and methodology
Develop system architectures and author detailed hardware requirements
Perform schematic design, component selection, and PCB layout (Altium Designer)
Conduct detailed analysis, including worst-case circuit, signal integrity, and power integrity studies
Plan and execute bring-up and verification of modules and integrated systems
Release hardware to production in collaboration with manufacturing and test teams
Mentor junior and senior engineers, building technical depth and professional growth
Leverage cross-disciplinary knowledge (software, mechanical, systems) to optimize hardware architectures

What we offer

Competitive Base
Equity
Benefits
Flexible PTO

Fulltime

Senior / Lead Electronics Engineer

At NewOrbit Space, our mission is to engineer the lowest orbiting satellites on ...

Location

United Kingdom , Reading

Salary:

Not provided

NewOrbit Space

Expiration Date

Until further notice

Requirements

Degree in Electrical Engineering, Electronics Engineering, or a related field
5+ years of professional experience developing electronics for demanding environments
Demonstrated experience with space electronics or similar high-reliability systems (e.g. aerospace, defense)
Strong fundamentals in analog and digital electronics
Proven experience with schematic design, PCB layout, and board bring-up
Solid understanding of space-specific constraints such as radiation, EMC/EMI, thermal behavior, and reliability
Experience taking hardware from concept through testing and qualification
EMI/EMC design, testing, and compliance for space hardware
Reliability analysis, including derating, worst-case analysis, and FMECA
Interface electronics for sensors, actuators, RF, or avionics subsystems

Job Responsibility

Own end-to-end development of space-qualified electronics, from requirements and architecture to flight hardware
Design, prototype, and review analog, digital, and mixed-signal electronics and PCB layouts
Lead schematic capture, component selection, PCB design, and design-for-manufacturing/test
Define and execute test, validation, and qualification plans for space electronics (functional, environmental, and reliability testing)
Ensure designs meet space requirements including radiation tolerance, EMI/EMC, reliability, and derating
Collaborate closely with systems, mechanical, software, and AIT teams to integrate electronics into satellite subsystems
Provide technical leadership through design reviews, mentoring, and guidance of junior engineers
Contribute to process improvement, technical standards, and architectural decisions across the electronics domain

What we offer

Equity and Competitive Salary
Comprehensive Benefits Package – Including private health insurance with dental and optical coverage, annual healthcare check-ups etc
Hybrid Work - A hybrid setup with one dedicated remote day per week
Relocation package and visa sponsorship if joining from abroad

Fulltime

Senior / Lead Power Electronics Engineer

Are you a power electronics specialist excited by the challenge of designing hig...

Location

United States , Los Angeles

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Power Electronics, or similar (Master’s preferred but not required)
5+ years’ experience in power electronics design, ideally within aerospace, automotive, defence, robotics, or high-reliability industrial systems
Strong experience designing switch-mode power supplies (SMPS) including topologies such as buck/boost, isolated converters, and multi-rail architectures
Proven ability to take hardware from concept through schematic, PCB, bring-up, debug, and qualification testing
Strong understanding of EMI/EMC principles, grounding, layout constraints, and mitigation strategies
Experience with power electronics simulation and analysis tools (SPICE, MATLAB/Simulink, or equivalent)
Confident working hands-on with test equipment (oscilloscopes, power analysers, electronic loads) in a lab environment
Strong communication and leadership skills – able to own designs, run reviews, and guide engineers through delivery

Job Responsibility

Lead the design, development, and verification of spacecraft power electronics (DC/DC converters, power stages, switching networks, protections)
Own power converter architecture, component selection, control loop design, and stability analysis
Develop and review schematics, PCB layouts, and design-for-manufacture principles for flight hardware
Support EPS power conditioning and distribution (PCDU) development including protections, fault handling, and power switching strategies
Perform detailed analysis including efficiency, thermal dissipation, transient response, EMC/EMI risk, and worst-case performance
Drive component qualification and parts selection for space environments (radiation tolerance, derating, thermal constraints)
Plan and execute test campaigns: functional, environmental (TVAC), vibration, EMC pre-compliance, and fault injection
Lead design reviews (PDR/CDR) and provide technical mentorship across the electrical team
Collaborate cross-functionally to define requirements, interfaces, and system-level trade-offs across mass/power/thermal margin
Support integration and on-orbit troubleshooting, ensuring rapid issue resolution when performance deviates from expected behaviour

What we offer

Competitive Salary + Equity + Benefits + Flexible PTO

Fulltime

Qnx Senior Engineer

Skilled QNX Developer to design, develop, and integrate embedded software compon...

Location

India , Chennai

Salary:

Not provided

Aptiv plc

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Electronics, Computer Science, or Electrical Engineering
4–10 years in embedded software development, with hands-on experience in QNX-based automotive or industrial systems
Strong understanding of QNX Neutrino RTOS architecture, process model, and IPC mechanisms
Proficiency in C/C++ programming, multi-threading, and memory management
Experience in developing system daemons, resource managers, and QNX services
Hands-on experience with Momentics IDE, debugging tools, and QNX SDKs
Familiarity with board bring-up, startup scripts, and resource configurations on QNX
Exposure to communication frameworks (SOME/IP, D-Bus, TCP/IP, CAN)
Experience with Qualcomm automotive platforms (SA8155/SA6145) or equivalent SoCs
Knowledge of bootloaders, file systems, and OTA mechanisms in embedded environments

Job Responsibility

Design, develop, and maintain QNX-based system services, daemons, and middleware components
Integrate and configure QNX Neutrino RTOS for automotive SoCs (e.g., Qualcomm SA8155, SA8295, SA6145)
Develop POSIX-compliant applications and system-level modules for IPC, memory, file system, and process management
Implement and debug multi-threaded, real-time software components using QNX APIs and resource managers
Work closely with BSP and driver teams to ensure seamless integration of hardware abstraction layers
Configure and optimize QNX startup scripts, resource managers, and service frameworks
Support communication stack integration (CAN, Ethernet, SOME/IP, IPC)
Analyze and optimize system performance, boot time, and memory usage
Debug kernel and user-space issues using tools such as qconn, pidin, momentics, and QNX System Profiler
Collaborate with Android or Linux coexisting systems for cross-domain communication and synchronization

What we offer

Higher Education Opportunities (UDACITY, UDEMY, COURSERA are available for your continuous growth and development)
Life and accident insurance
Sodexo cards for food and beverages
Well Being Program that includes regular workshops and networking events
EAP Employee Assistance
Access to fitness clubs (T&C apply)
Creche facility for working parents

Fulltime

Senior Electronics Technician

Senior Electronics Technician – Space Hardware. We’re working with a fast-growin...

Location

United Kingdom , Glasgow

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

HNC/HND (or equivalent) in Electronics or similar
5-10+ years hands-on electronics assembly, test, and fault-finding experience
Strong soldering skills (SMT & through-hole)
Experience with embedded electronics and production test environments
Comfortable working to detailed drawings, procedures, and quality standards

Job Responsibility

Hand-soldering and assembling high-reliability PCBAs (fine-pitch SMT, microscope work)
Building complex wiring harnesses and electro-mechanical assemblies
Integrating and testing electronic systems end-to-end
Troubleshooting at component and system level
Working closely with engineers on cutting-edge space hardware
Maintaining production and test documentation to high quality standards
Supporting lab equipment, inventory, and continuous improvement

What we offer

Work on flight hardware that goes into orbit
Learn space-grade electronics from industry experts
Be part of a passionate, highly skilled engineering team
Make the leap into the space sector without starting over

Fulltime

Senior Power Engineer Analogue Design

An exciting opportunity to make a difference within the industry delivering high...

Location

United Kingdom , Guildford

Salary:

Not provided

Surrey Satellite Technology Limited

Expiration Date

Until further notice

Requirements

At least 5 years Analogue/Power Electronics Design experience, ideally in the Space or Aerospace Industries
BTEC / Degree in Electronics or equivalent
Excellent understanding of analogue and power electronics
Familiarity with microprocessor and FPGA interfacing
Wide knowledge of electronic components, preferably for a space environment
Wide experience with schematic capture and simulation software (i.e. Mentor Graphics, OrCAD PSPICE, etc.)
Flexible and adaptable to changing priorities
Ability to work simultaneously on a variety of projects
Results orientated, can-do approach
Pro-active and able to take initiative

Job Responsibility

Undertaking the design, analysis, development, verification and delivery of power system and energy conversion solutions into different missions, including power subsystem lead responsibility for those missions
Requirements capture and derivation from top level requirements to module level requirements
Design and delivery of Analogue/Power Electronics Modules in Spacecraft, which meet these requirements within the agreed schedule/cost
Management and verification of these requirements
Carrying out the required analysis to verify that these requirements will be met over the mission life-time including FMECA, WCA, PSA, Reliability Analysis, etc
Specifying and carrying out the verification tests on hardware
Authoring of technical documents (including test/verification plans, procedures and technical descriptions)

What we offer

32 days Holiday plus Bank Holidays
Pension Scheme with Life Assurance
Private Medical & International Travel Insurance
Annual Bonus Scheme
Share Incentive Plan
Enhanced Maternity, Paternity & Shared Parental Pay for new parents
High Street Discount Scheme and many more

Fulltime

Select Country

Senior Space Electronics Hardware Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?