Senior Space Electronics Engineer Job at NewSpace Technical (Berlin)

Senior Space Electronics Hardware Engineer

Senior Electronics Hardware Engineer – Space (Berlin). Our client, a fast-growin...

Location

Germany , Berlin

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

BSc in Electrical Engineering with 7+ years experience (or MSc/PhD with 5+)
Experience with space hardware electrical design and qualification campaigns
Strong background in power and data systems
Experience with spacecraft C&DH, high-speed signalling, power electronics, EMC/EMI, and grounding
Ability to translate system requirements into robust electrical designs

Job Responsibility

Lead electrical, data, power, and avionics development for a space LiDAR payload
Adapt existing LEO LiDAR electrical designs for non-LEO missions
Design FPGA-based systems and associated peripherals (memory, ADC/DAC, transceivers)
Develop payload and LiDAR timing systems (laser/camera synchronisation and UTC)
Design power regulation and distribution architectures
Support flatsat and flight hardware build, test, and space qualification
Identify and mitigate electrical and radiation-related design risks
Produce requirements, test plans/reports, and design review material (PDR, CDR, etc.)

Fulltime

Senior / Lead Electronics Engineer

At NewOrbit Space, our mission is to engineer the lowest orbiting satellites on ...

Location

United Kingdom , Reading

Salary:

Not provided

NewOrbit Space

Expiration Date

Until further notice

Requirements

Degree in Electrical Engineering, Electronics Engineering, or a related field
5+ years of professional experience developing electronics for demanding environments
Demonstrated experience with space electronics or similar high-reliability systems (e.g. aerospace, defense)
Strong fundamentals in analog and digital electronics
Proven experience with schematic design, PCB layout, and board bring-up
Solid understanding of space-specific constraints such as radiation, EMC/EMI, thermal behavior, and reliability
Experience taking hardware from concept through testing and qualification
EMI/EMC design, testing, and compliance for space hardware
Reliability analysis, including derating, worst-case analysis, and FMECA
Interface electronics for sensors, actuators, RF, or avionics subsystems

Job Responsibility

Own end-to-end development of space-qualified electronics, from requirements and architecture to flight hardware
Design, prototype, and review analog, digital, and mixed-signal electronics and PCB layouts
Lead schematic capture, component selection, PCB design, and design-for-manufacturing/test
Define and execute test, validation, and qualification plans for space electronics (functional, environmental, and reliability testing)
Ensure designs meet space requirements including radiation tolerance, EMI/EMC, reliability, and derating
Collaborate closely with systems, mechanical, software, and AIT teams to integrate electronics into satellite subsystems
Provide technical leadership through design reviews, mentoring, and guidance of junior engineers
Contribute to process improvement, technical standards, and architectural decisions across the electronics domain

What we offer

Equity and Competitive Salary
Comprehensive Benefits Package – Including private health insurance with dental and optical coverage, annual healthcare check-ups etc
Hybrid Work - A hybrid setup with one dedicated remote day per week
Relocation package and visa sponsorship if joining from abroad

Fulltime

Senior Electronics Hardware Engineer

As a Senior Hardware Engineer, you will engage with an experienced cross-discipl...

Location

New Zealand

Salary:

Not provided

Herbruck Poultry Ranch

Expiration Date

Until further notice

Requirements

Solid understanding of fundamental circuit design and discrete electronic components
Critical thinking and exceptional debugging and reasoning skills
Design and clear understanding of DC/DC switch mode power supplies and topologies
A good understanding of magnetic principles
Understanding of MCU, LCD, memories and sensor devices
EMC mitigation, cause and effect
Understanding of Wifi, BT, FPGA and touch screen technologies
Strong problem solving and debugging skills with a solid understanding of core engineering principles, and analytical techniques is required
Experience with high-speed interfaces (ADC/DAC, Gigabit Ethernet, HDMI, e/DP, USB3, PCIe, MIPI, SERDES)
Experience with DFx (Design for Cost, Test, Manufacturing)

Job Responsibility

Design world-class hardware, and, if applicable, software/firmware
Broad cross-functional engineering influence with an emphasis on delighting customers with innovation in the consumer electronics space
Complete technical ownership for the programs
Lead/participate in electronic hardware design reviews
Contribute to all aspects of technology readiness including manufacturability
Assist with technical Research and Proof of Concept phases

What we offer

Competitive pension plan with company match
health benefits
paid time off
a robust Wellness Program

Fulltime

Senior Mechanical Design Engineer – Space Payloads

Our client, a growing NewSpace startup, is seeking a Senior Mechanical Design En...

Location

Germany , Berlin

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

BSc in Mechanical Engineering with 7+ years experience (or MSc/PhD with 5+)
Strong CAD experience (e.g. SolidWorks, CATIA, Fusion)
Experience with mechanical and opto-mechanical design for space applications
Experience leading or supporting space qualification campaigns
Knowledge of FEM, structural dynamics, resonant modes, lightweight structures, and thermal/mechanical deformation
Experience translating system-level requirements into mechanical designs
Familiarity with GD&T standards (e.g. ISO GPS)
Strong written and verbal communication skills in English
Fluency in English (C1 or higher)
Willingness to relocate to Berlin (EU work authorisation is a plus)

Job Responsibility

Lead mechanical and opto-mechanical design of a space payload from concept through detailed design, build, AIT, and deployment
Perform mechanical design, analysis, documentation, fabrication support, assembly, and qualification activities
Design structures such as optical benches, opto-mechanical assemblies, mechanisms, and electronics packaging (PCBs, connectors, harnessing) using CAD tools
Work hands-on with technicians during assembly, integration, and test
Lead vibration and acoustic qualification campaigns and support thermal-vacuum testing
Collaborate closely with cross-functional teams across systems, optics, thermal, and mission engineering
Develop and maintain mechanical documentation including architectures, ICDs, assembly procedures, and V&V plans
Interface with suppliers and external vendors for parts and manufacturing
Coordinate with spacecraft bus teams to ensure clean mechanical and structural interfaces
Prepare material for major design reviews (PDR, CDR, MRR, FRR) and provide RFP cost inputs

Fulltime

Senior Mechanical Design Engineer – Space Payloads

Our client, a growing NewSpace startup, is seeking a Senior Mechanical Design En...

Location

Germany , Berlin

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

BSc in Mechanical Engineering with 7+ years experience (or MSc/PhD with 5+)
Strong CAD experience (e.g. SolidWorks, CATIA, Fusion)
Experience with mechanical and opto-mechanical design for space applications
Experience leading or supporting space qualification campaigns
Knowledge of FEM, structural dynamics, resonant modes, lightweight structures, and thermal/mechanical deformation
Experience translating system-level requirements into mechanical designs
Familiarity with GD&T standards (e.g. ISO GPS)
Strong written and verbal communication skills in English
Fluency in English (C1 or higher)
Willingness to relocate to Berlin (EU work authorisation is a plus)

Job Responsibility

Lead mechanical and opto-mechanical design of a space payload from concept through detailed design, build, AIT, and deployment
Perform mechanical design, analysis, documentation, fabrication support, assembly, and qualification activities
Design structures such as optical benches, opto-mechanical assemblies, mechanisms, and electronics packaging (PCBs, connectors, harnessing) using CAD tools
Work hands-on with technicians during assembly, integration, and test
Lead vibration and acoustic qualification campaigns and support thermal-vacuum testing
Collaborate closely with cross-functional teams across systems, optics, thermal, and mission engineering
Develop and maintain mechanical documentation including architectures, ICDs, assembly procedures, and V&V plans
Interface with suppliers and external vendors for parts and manufacturing
Coordinate with spacecraft bus teams to ensure clean mechanical and structural interfaces
Prepare material for major design reviews (PDR, CDR, MRR, FRR) and provide RFP cost inputs

Fulltime

Senior / Lead Power Electronics Engineer

Are you a power electronics specialist excited by the challenge of designing hig...

Location

United States , Los Angeles

Salary:

Not provided

NewSpace Technical

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Power Electronics, or similar (Master’s preferred but not required)
5+ years’ experience in power electronics design, ideally within aerospace, automotive, defence, robotics, or high-reliability industrial systems
Strong experience designing switch-mode power supplies (SMPS) including topologies such as buck/boost, isolated converters, and multi-rail architectures
Proven ability to take hardware from concept through schematic, PCB, bring-up, debug, and qualification testing
Strong understanding of EMI/EMC principles, grounding, layout constraints, and mitigation strategies
Experience with power electronics simulation and analysis tools (SPICE, MATLAB/Simulink, or equivalent)
Confident working hands-on with test equipment (oscilloscopes, power analysers, electronic loads) in a lab environment
Strong communication and leadership skills – able to own designs, run reviews, and guide engineers through delivery

Job Responsibility

Lead the design, development, and verification of spacecraft power electronics (DC/DC converters, power stages, switching networks, protections)
Own power converter architecture, component selection, control loop design, and stability analysis
Develop and review schematics, PCB layouts, and design-for-manufacture principles for flight hardware
Support EPS power conditioning and distribution (PCDU) development including protections, fault handling, and power switching strategies
Perform detailed analysis including efficiency, thermal dissipation, transient response, EMC/EMI risk, and worst-case performance
Drive component qualification and parts selection for space environments (radiation tolerance, derating, thermal constraints)
Plan and execute test campaigns: functional, environmental (TVAC), vibration, EMC pre-compliance, and fault injection
Lead design reviews (PDR/CDR) and provide technical mentorship across the electrical team
Collaborate cross-functionally to define requirements, interfaces, and system-level trade-offs across mass/power/thermal margin
Support integration and on-orbit troubleshooting, ensuring rapid issue resolution when performance deviates from expected behaviour

What we offer

Competitive Salary + Equity + Benefits + Flexible PTO

Fulltime

Mission Modeling and Simulation Software Engineer, Senior

As a software engineer who builds in mission-driven domains, you’ve spent your c...

Location

United States , Annapolis Junction

Salary:

86900.00 - 198000.00 USD / Year

Booz Allen Hamilton

Expiration Date

Until further notice

Requirements

5+ years of experience developing software for modeling, simulation, or mission planning applications in defense, intelligence, or national security contexts
Experience building domain models that represent operational scenarios, including entity definitions, action spaces, effect chains, and constraint structures
Experience with effects modeling, including the representation of cyber operations, electronic warfare, or information activities within simulation or planning frameworks
Ability to translate operational concepts and doctrine into software-representable structures such as effect catalogs, constraint templates, or scenario specifications
Ability to obtain a TS/SCI clearance with a polygraph
Bachelor’s degree in a CS, Systems Engineering, or Operations Research field

Job Responsibility

Own the scenario execution layer and operational domain models for a platform that generates optimized courses of action under uncertainty
Define action spaces, effects models, and constraint templates that give the solver something meaningful to reason over
Build the execution harness and vignettes that demonstrate cross-domain composition in operationally-relevant contexts
Ensure the platform works against scenarios that defense planners and operators recognize as real, relevant, and challenging

What we offer

Health
Life
Disability
Financial
Retirement benefits
Paid leave
Professional development
Tuition assistance
Work-life programs
Dependent care

Fulltime

Qnx Senior Engineer

Skilled QNX Developer to design, develop, and integrate embedded software compon...

Location

India , Chennai

Salary:

Not provided

Aptiv plc

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Electronics, Computer Science, or Electrical Engineering
4–10 years in embedded software development, with hands-on experience in QNX-based automotive or industrial systems
Strong understanding of QNX Neutrino RTOS architecture, process model, and IPC mechanisms
Proficiency in C/C++ programming, multi-threading, and memory management
Experience in developing system daemons, resource managers, and QNX services
Hands-on experience with Momentics IDE, debugging tools, and QNX SDKs
Familiarity with board bring-up, startup scripts, and resource configurations on QNX
Exposure to communication frameworks (SOME/IP, D-Bus, TCP/IP, CAN)
Experience with Qualcomm automotive platforms (SA8155/SA6145) or equivalent SoCs
Knowledge of bootloaders, file systems, and OTA mechanisms in embedded environments

Job Responsibility

Design, develop, and maintain QNX-based system services, daemons, and middleware components
Integrate and configure QNX Neutrino RTOS for automotive SoCs (e.g., Qualcomm SA8155, SA8295, SA6145)
Develop POSIX-compliant applications and system-level modules for IPC, memory, file system, and process management
Implement and debug multi-threaded, real-time software components using QNX APIs and resource managers
Work closely with BSP and driver teams to ensure seamless integration of hardware abstraction layers
Configure and optimize QNX startup scripts, resource managers, and service frameworks
Support communication stack integration (CAN, Ethernet, SOME/IP, IPC)
Analyze and optimize system performance, boot time, and memory usage
Debug kernel and user-space issues using tools such as qconn, pidin, momentics, and QNX System Profiler
Collaborate with Android or Linux coexisting systems for cross-domain communication and synchronization

What we offer

Higher Education Opportunities (UDACITY, UDEMY, COURSERA are available for your continuous growth and development)
Life and accident insurance
Sodexo cards for food and beverages
Well Being Program that includes regular workshops and networking events
EAP Employee Assistance
Access to fitness clubs (T&C apply)
Creche facility for working parents

Fulltime

Select Country

Senior Space Electronics Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?